XC7A100T-L1FGG484I - 101,440 Logic Elements FPGA | AMD
Артикул: XC7A100T-L1FGG484I ✓ АктивенXC7A100T-L1FGG484I Обзор
An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnects, block RAM, digital signal processing resources, and input/output blocks. The Artix-7 family sits within the broader FPGA and programmable-logic hierarchy, combining high-density programmable logic with relatively low power consumption and system-on-chip capabilities. A design is created through synthesis, placement, and routing before its bitstream is loaded into the FPGA or its configuration memory.
The XC7A100T-L1FGG484I provides 101,440 logic elements and 4,976,640 RAM bits, making it suitable for embedded control, industrial automation, communications, instrumentation, and general-purpose digital signal processing. Its 250 user I/O pins permit interfaces to external memories, converters, transceivers, sensors, and display or communication peripherals. The -1 designation identifies its device speed grade within the Artix-7 ordering scheme.
Within the device, programmable logic is organized into logic array blocks connected by a programmable routing network. Dedicated block RAM preserves data between clock cycles, while DSP resources accelerate arithmetic operations commonly used in filters, transforms, and control algorithms. Configuration and power-management blocks coordinate startup, bitstream loading, internal references, and sequencing of the device's supply rails.
Typical implementations include factory automation controllers, compact industrial gateways, video and imaging pipelines, laboratory instruments, embedded communications systems, and low-power edge-processing platforms. The FGG484 package is particularly useful when a board requires more I/O than smaller Artix-7 packages provide while retaining a lower pin count than the largest packages in the family.
Power and signal-integrity design remain important at system level. Place decoupling capacitors beside the appropriate power and ground balls, route high-speed interfaces with controlled impedance, and follow AMD's package pinout and UG475 guidance when assigning balls and configuring I/O standards. Validate the complete power tree, configuration scheme, thermal environment, and external memory interface before releasing production hardware.
This page combines the device's electrical characteristics, package and pinout references, commercially relevant source links, same-footprint replacement options, and practical design guidance. It is intended to help engineers determine whether the XC7A100T-L1FGG484I fits an existing PCB and whether a speed-grade or temperature-grade variant is appropriate for the target application.
Аналоги без доработки для XC7A100T-L1FGG484I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC7A100T-L1FGG484I (тот же форм-фактор и посадочное место) — отличается по Package, Speed Grade, Logic Cells, Device Type, Core Supply Voltage.
XC7A100T-1FGG484I
✅ Прямая заменаУточнить цену
Открыть даташит →XC7A100T-2FGG484I
✅ Прямая замена✓ В наличии
$45.9375 / шт.
Открыть даташит →XC7A100T-3FGG484E
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →XC7A100T-2FGG484C
✅ Прямая заменаУточнить цену
Открыть даташит →XC7A100T-2FG484I
✅ Прямая заменаУточнить цену
Открыть даташит →XC7A100T-L1FGG484I Максимальные параметры и электрические характеристики
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| Programmable Logic Elements | 101,440 logic elements |
| Logic Array Blocks | 7,925 logic array blocks |
| Block RAM | 4,976,640 RAM bits |
| User I/O Pins | 250 user I/O pins |
| Core Supply Voltage | 0.95 V to 1.05 V |
| Speed Grade | -1 speed grade |
| Junction Temperature Range | -40°C to +100°C |
| Корпус | 484-BBGA FGG484 package |
| Package Pin Count | 484 pins |
| Тип монтажа | Surface-mount flip-chip BGA |
Руководство по цоколевке XC7A100T-L1FGG484I в корпусе 484 pins
Цоколевка для XC7A100T-L1FGG484I (корпус 484 pins). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC7A100T-L1FGG484I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC7A100T-L1FGG484I подходит для 6 применениеs: Industrial Automation Controllers, Industrial Communications Gateways, Machine Vision and Imaging Preprocessing, Digital Signal Processing and Control, Instrumentation and Test Equipment, Embedded Security and Access Control.
Industrial Automation Controllers
The XC7A100T-L1FGG484I fits industrial automation controllers that must coordinate sensors, actuators, communications, and safety-related logic in one programmable device. Its 101,440 logic elements can implement finite-state machines, motion sequences, interlocks, and data-processing pipelines, while 4,976,640 RAM bits provide local buffers for counters, histories, and communication frames. The 250 user I/O pins reduce the need for external interface devices around common industrial logic levels. With the -40°C to +100°C junction specification, the device is suitable for extended-temperature control cabinets when the complete system also satisfies its isolation, surge, and environmental requirements.
Рекомендуется
Industrial Communications Gateways
The XC7A100T-L1FGG484I can serve as the programmable protocol and routing element in an industrial communications gateway. Parallel interfaces and dedicated I/O allow it to connect local transceivers and sensors to a processor or embedded network controller, while its logic resources support packet classification, buffering, and timing adaptation. The 4,976,640 RAM bits can hold queues and protocol workspaces without immediately relying on external memory. A designer should use the -1 timing grade only after confirming that the selected transceiver rates, packet-processing paths, and clock domains close timing with adequate margin.
Рекомендуется
Machine Vision and Imaging Preprocessing
The XC7A100T-L1FGG484I is well matched to machine-vision preprocessing because its programmable logic can capture sensor data, perform thresholding, line and pixel processing, and interface with image sensors or frame buffers. The FPGA's 101,440 logic elements and block RAM support parallel pipelines where deterministic latency is more useful than general-purpose software execution. Its 250 user I/O pins can accommodate camera-control signals, parallel data lanes, and synchronization inputs. Clocking, input timing, and high-speed PCB routing remain critical, so the implementation should use the intended sensor timing and I/O standards during constraints and timing analysis.
Рекомендуется
Digital Signal Processing and Control
The XC7A100T-L1FGG484I can implement parallel digital signal processing and embedded control functions in instruments, power systems, and real-time measurement equipment. Programmable logic blocks support filters, correlators, fixed-point arithmetic, and control algorithms, while block RAM supports circular buffers and sample histories. The -1 speed grade should be matched against the required sample rate and clock frequency, while the 0.95 V to 1.05 V core specification defines the regulated core rail. For production designs, include DSP resource utilization, timing closure, thermal margin, and power estimation at the expected utilization rather than relying on logic-element count alone.
Рекомендуется
Instrumentation and Test Equipment
The XC7A100T-L1FGG484I is useful in compact instrumentation equipment where deterministic acquisition, sequencing, and data preparation are required. Its configurable logic can execute control state machines, generate stimulus patterns, coordinate ADC or DAC interfaces, and reduce acquired data before transfer to a host processor. The 250 user I/O pins provide room for multiple measurement channels and digital controls, and the block RAM supports sample buffering. Because FGG484 is a fine-pitch flip-chip BGA, board assembly requires controlled solder-paste volume, adequate thermal cycling, and careful power-plane design, with the final pin and bank assignments taken directly from the package documentation.
Рекомендуется
Embedded Security and Access Control
The XC7A100T-L1FGG484I can consolidate access-control logic, credential processing, event logging, and communications interfaces in a compact embedded platform. Its programmable logic supports concurrent protocol handling, while block RAM provides space for keys, tokens, counters, and audit records when the architecture permits secure storage in the selected implementation. The device should not be treated as automatically secure; key protection, bitstream encryption, configuration access, debug-port settings, and recovery behavior must be addressed explicitly. Thermal and timing reviews should cover encryption engines, external nonvolatile memory interfaces, and any real-time response requirements.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC7A100T-L1FGG484I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC7A100T-1FGG484I | XC7A100T-2FGG484I | XC7A100T-3FGG484E | XC7A100T-2FGG484C | XC7A100T-2FG484I |
|---|---|---|---|---|---|---|
| Brand | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices |
| Package | 484-BBGA FGG484 | 484-BBGA FGG484 | 484-BBGA FGG484 | 484-BBGA FGG484 | 484-BBGA FGG484 | 484-BBGA package |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Elements | 101,440 logic elements | 101,440 logic elements | 101,440 logic elements | 101,440 logic elements | 101,440 logic elements | 101,440 logic elements |
| Logic Array Blocks | 7,925 logic array blocks | 7,925 logic array blocks | 7,925 logic array blocks | 7,925 logic array blocks | 7,925 logic array blocks | 7,925 logic array blocks |
| Block RAM | 4,976,640 RAM bits | 4,976,640 RAM bits | 4,976,640 RAM bits | 4,976,640 RAM bits | 4,976,640 RAM bits | 4,976,640 RAM bits |
| User I/O Pins | 250 user I/O pins | 250 user I/O pins | 250 user I/O pins | 250 user I/O pins | 250 user I/O pins | 250 user I/O pins |
| Core Supply Voltage | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V |
| Speed Grade | -1 speed grade | -1 speed grade | -2 speed grade | -3 speed grade | -2 speed grade | -2 speed grade |
Ключевые отличия
- Maintains the full XC7A100T resource density across the listed FGG484 alternatives (против XC7A100T-1FGG484I)
- The -2 option provides a higher performance grade on the same board footprint (против XC7A100T-2FGG484I)
- A three-grade performance alternative is available without changing the 484-ball package family (против XC7A100T-3FGG484E)
- Same-density options avoid the resource reduction associated with smaller Artix-7 devices (против XC7A100T-35T-1FGG484I)
Заметки по проектированию
Build the power tree around the 0.95 V to 1.05 V core requirement and the separate bank and auxiliary rails identified in the FGG484 package documentation. Place the required bypass capacitors directly beside their associated BGA balls and use uninterrupted, low-impedance power and ground planes. Validate voltage sequencing, startup current, and transient response with the intended memories and I/O loads, then compare the measured or estimated power against the thermal design limit.
Use AMD's Artix-7 FGG484 pinout files and UG475 during schematic and PCB layout rather than inferring BGA assignments from a generic footprint. Confirm each ball's bank voltage, I/O standard, configuration function, and power-ground classification against the exact device ordering code. Keep sensitive configuration and clock paths short, preserve the recommended ball escape and via arrangements, and verify pad, solder-mask, and paste geometry for the manufacturer's assembly recommendations.
Do not treat the XC7A100T-1FGG484I, XC7A100T-2FGG484I, and XC7A100T-3FGG484E options as timing-identical devices. A faster grade can change path delay, power, and bitstream performance, while a commercial-temperature suffix can reduce the allowable junction-temperature range. Before substitution, compare the decoded ordering information, rerun timing and power analysis, and confirm that configuration, memory interfaces, and production programming files remain valid for the selected part.
Thermal performance depends on the implemented design, board copper, airflow, and the difference between ambient and junction temperature. Estimate utilization-dependent core and I/O power before selecting copper area or a cooling strategy. Use the device's documented thermal characteristics for the FGG484 package and test the assembled board at maximum expected clock, I/O, and memory activity. Preserve airflow around the BGA region and avoid concentrating heat sources directly beneath the FPGA.
Constrain every external interface according to the actual clocking and I/O topology rather than applying one universal constraint to all 250 user I/O pins. Use the appropriate board-transmission-line model for high-speed edges, account for package and via parasitics, and maintain continuous return paths. Configuration pins, clock inputs, and interfaces with external memories deserve particular review because incorrect routing or timing constraints can prevent reliable startup or cause intermittent data errors.
Информация о соответствии
The available product information identifies an industrial-temperature Artix-7 FPGA but does not provide component-level RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations.