XC7K160T-2FBG484I - 162K-Cell Kintex-7 FPGA | AMD
N.º da peça: XC7K160T-2FBG484I ✓ AtivoXC7K160T-2FBG484I Visão geral
A field-programmable gate array is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, and dedicated digital signal processing resources. Within the FPGA hierarchy, the Kintex-7 family occupies the performance range between lower-cost Virtex-7 devices and ultra-high-end Virtex-7 devices, making the XC7K160T suitable for demanding communications, industrial control, instrumentation, and signal-processing systems.
Principal device attributes include 162,240 logic cells, a 28 nm process node, 285 I/O, and 484-ball lead-free FCBGA packaging. The -2 suffix identifies the performance grade, while the I suffix identifies the industrial temperature grade. The FCBGA construction provides dense interconnect access for high-pin-count designs, although it requires careful via-in-pad and thermal-via layout to achieve reliable electrical and thermal performance.
The Kintex-7 architecture combines programmable logic with DSP slices, block RAM, and high-speed transceiver resources on devices that include them. This balance allows designers to consolidate control logic, parallel data paths, packet-processing functions, and digital filtering into one programmable device instead of combining an FPGA with several discrete companion ICs. The 484-ball package also requires an assembly process capable of handling fine-pitch, large-area BGA interconnects.
Typical uses include industrial automation and motion control, high-speed data acquisition, telecommunications line-card processing, radar and test instrumentation, image-processing pipelines, and low-latency protocol bridging. The 162,240-cell device provides more logic capacity than many smaller Kintex-7 members, making it appropriate for multi-channel architectures that must be reconfigured for different operating modes without redesigning the printed circuit board.
A critical design consideration is the power and thermal budget. Although the nominal core voltage is 1 V, utilization-dependent dynamic power, adjacent I/O activity, and the dense BGA solder mask design all influence board temperature. Use the AMD power estimator and the device data sheet for resource-specific figures, provide multiple decoupling positions, and validate the assembled board across temperature and I/O activity conditions.
This page adds application-specific engineering context, a parameter comparison among same-footprint Kintex-7 options, and practical layout guidance that is not consolidated in a single manufacturer datasheet table.
Alternativas drop-in para XC7K160T-2FBG484I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC7K160T-2FBG484I (mesmo formato e footprint) — diferindo em Device Type, Package, Speed Grade, Temperature Grade, Package Type.
XC7K160T-1FBG484I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7K160T-1FBG484C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7K160T-2FBG484C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7K160T-3FBG484E
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7K160T-L2FBG484I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC7K160T-2FBG484I Classificações máximas e características elétricas
| Device Type | Kintex-7 field-programmable gate array (FPGA) |
| Logic Cells | 162,240 cells |
| Process Technology | 28 nm |
| Nominal Core Supply Voltage | 1 V |
| Input/Output Count | 285 I/O |
| Package Type | 484-ball FCBGA |
| Package Designation | 484-BBGA |
| Speed Grade | -2 |
| Temperature Grade | I (industrial) |
| Programmable Logic Resources | 12,675 configurable logic blocks |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do XC7K160T-2FBG484I 484-bbga
Configuração de pinos para XC7K160T-2FBG484I (pacote 484-bbga). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC7K160T-2FBG484I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC7K160T-2FBG484I é adequado para 6 aplicaçãos: Industrial Automation and Motion Control, High-Speed Data Acquisition, Telecommunications Line-Card Processing, Radar and Signal Processing, Test and Measurement Instrumentation, Image and Video Processing.
Industrial Automation and Motion Control
The XC7K160T-2FBG484I fits industrial motion-control platforms that combine sequencing, machine vision interfaces, and real-time logic in one programmable device. Its 162,240 logic cells provide substantial parallel capacity, while the -2 speed grade supports demanding control pipelines. The device can implement multiple sensor-conditioning channels and deterministic fieldbus handling around a processor or microcontroller. Because the package has 285 I/O and 484 balls, keep critical routing short and place decoupling close to the supply balls to limit power-transient impedance.
Recomendado
High-Speed Data Acquisition
The XC7K160T-2FBG484I is suitable for parallel ADC capture, waveform analysis, and laboratory instrumentation where deterministic data movement matters more than minimal device count. Its 162,240 logic cells can support parallel sample-path control, trigger logic, and buffer management, while the -2 grade adds timing margin over slower Kintex-7 grades. The 484-ball FCBGA footprint demands careful via-in-pad or microvia construction and a low-impedance power network so switching current does not corrupt the captured signal.
Recomendado
Telecommunications Line-Card Processing
The XC7K160T-2FBG484I can serve as the main programmable processor in a telecom line card where packet framing, traffic classification, and interface adaptation must operate concurrently. The large 162,240-cell Kintex-7 device provides more logic headroom than small FPGAs, and the -2 performance grade helps meet demanding timing paths. Its 285 I/O support multiple control and data interfaces, but board planning must separate high-speed transceiver or memory routing from sensitive power-distribution paths and preserve continuous reference-plane returns.
Recomendado
Radar and Signal Processing
The XC7K160T-2FBG484I is appropriate for radar, sonar, and other parallel signal-processing chains where filtering, correlation, and spectral transforms require substantially more configurable logic than a microcontroller provides. Its 162,240 cells allow multiple processing lanes to be time-division multiplexed or operated in parallel, and the -2 grade supports faster clock targets. The main engineering trade-off is power: use the AMD power estimator with realistic toggle rates and place thermal vias beneath the dense FCBGA to keep junction temperature within the design limit.
Recomendado
Test and Measurement Instrumentation
The XC7K160T-2FBG484I supports sophisticated test and measurement products that combine sequencing, pattern generation, analysis, and communication protocols in a single device. Its 162,240 logic cells provide room for multiple channels of control logic, while 285 I/O accommodate external converters, memory, and test interfaces. The -2 performance grade is useful when acquisition and processing paths must complete within short clock cycles. Plan the BGA escape routing for assembly yield and provide local core and I/O decoupling rather than relying on distant bulk capacitors.
Recomendado
Image and Video Processing
The XC7K160T-2FBG484I can implement image pre-processing, pixel transport, color conversion, and sensor-to-display interface logic in embedded vision systems. The 162,240-cell device provides enough parallel capacity for multi-pixel pipelines, and the -2 speed grade improves timing margin for pixel-clock processing. The 484-ball FCBGA also makes component placement compact, but the layout must account for simultaneous switching from high-speed I/O. Use a solid power plane, dense decoupling, and via stitching to maintain return paths for edge-sensitive signals.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC7K160T-2FBG484I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC7K160T-1FBG484I | XC7K160T-1FBG484C | XC7K160T-2FBG484C | XC7K160T-3FBG484E | XC7K160T-L2FBG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-ball FCBGA | 484-ball FCBGA - same | 484-ball FCBGA - same | 484-ball FCBGA - same | 484-ball FCBGA - same | 484-ball FCBGA - same |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -2 | -1 | -1 | -2 | -3 | -2L |
| Temperature-Grade Suffix | I | I | C | C | E | I |
| Nominal Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 0.95 V nominal |
| Input/Output Count | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O |
Principais diferenciais
- Higher -2 performance grade within the same 484-ball footprint (vs XC7K160T-1FBG484I)
- Industrial-grade ordering option (vs XC7K160T-2FBG484C)
- Lower-power-oriented -2L family option on the same footprint (vs XC7K160T-L2FBG484I)
Notas de projeto
Use the AMD package documentation to build the 484-ball escape layout around the PCB stack-up and assembly capability. Via-in-pad or microvia structures improve routing density, but they require controlled filled or capped vias and a solder-mask design that avoids voiding. Place high-frequency decoupling capacitors directly beneath the relevant supply balls and connect them with the shortest possible paths to the device-side power and ground planes.
Treat the FCBGA as a concentrated heat source. Distribute thermal vias through the board beneath the device and connect them to internal copper planes, then model the assembled board with realistic component heat sources and enclosure airflow. Estimated: junction temperature equals ambient temperature plus device power dissipation multiplied by the effective board-and-enclosure thermal resistance. Validate the estimate against the AMD power-estimator results and a thermal measurement on representative hardware.
Separate the core and I/O supply budgets because both can contribute significant transient current even though the nominal core voltage is 1 V. Place bulk energy storage near the device and distributed high-frequency capacitors at each supply ball group. Confirm regulator stability, DC-point of load, transient response, and allowed ripple using the design's clocking, I/O activity, and estimated utilization; a nominal regulator output rating alone does not establish the design margin.
Do not treat a lower speed-grade suffix as an automatic zero-cost substitution. Re-run timing analysis, regenerate the bitstream for the selected device, and confirm that temperature and power behavior still meet the system specification. Also avoid substituting the 676-ball XC7K160T-2FBG676I on the 484-ball PCB because its ball count and I/O arrangement differ, requiring a new footprint and signal assignment.
Informações de conformidade
The industrial suffix identifies the environmental temperature grade, not an AEC-Q100 automotive qualification. Confirm RoHS, REACH, lead-free, and halogen-free declarations for the exact ordering code through the manufacturer product documentation.