XC7K160T-3FBG484E - 162K Logic Cell Kintex-7 FPGA | AMD
N.º da peça: XC7K160T-3FBG484E ✓ AtivoXC7K160T-3FBG484E Visão geral
A Kintex-7 FPGA belongs to the 7 Series FPGA hierarchy and combines configurable logic blocks, programmable input/output blocks, block RAM, digital signal processing slices, high-speed transceivers, clock-management resources, and dedicated configuration memory. Unlike a fixed-function processor or application-specific controller, the Kintex-7 allows parallel datapaths, custom interfaces, and hardware acceleration to be implemented through programmable logic, while the integrated MMCM and PLL resources support clock generation and jitter control.
Key resources for the XC7K160T-3FBG484E include 162,240 logic cells, 11,700 Kb of block RAM, 600 DSP slices, and 285 I/O. The -3 speed grade provides the highest Kintex-7 performance class identified in the family documentation, making it appropriate for timing-critical datapaths. Its extended temperature designation covers industrial-temperature applications where the junction can reach 100 °C, subject to the device's power and thermal limits.
The 484-FCBGA package provides a high-density interconnect for high-performance designs requiring many external connections. Because the device uses a large, fine-pitch BGA, PCB construction demands careful via-in-pad or via-under-bump geometry, controlled solder-paste deposition, X-ray inspection, and adequate thermal relief around the package. The AMD Kintex-7 data sheet and package documentation should be used directly for the land pattern, pin states, configuration requirements, and power-decoupling arrangement.
Typical applications include high-throughput signal processing, digital communications, industrial control, high-speed data acquisition, network infrastructure, video and image processing, and prototyping systems that benefit from parallel programmable logic. The 600 DSP slices allow multiply-accumulate-heavy filters and transforms to execute in parallel, while 11,700 Kb of block RAM supports buffering, packet storage, lookup functions, and wide data paths.
When planning the PCB, place decoupling capacitors close to the supply pins, preserve the manufacturer's high-speed routing guidance, and treat thermal management as part of the layout rather than an afterthought. Configuration pins, clock inputs, and high-speed transceiver or I/O interfaces each have dedicated constraints that must be checked against the selected design tools and board stack-up.
This page consolidates device resource counts, package details, temperature information, drop-in device variants, and engineering design guidance into a single purchasing and evaluation reference. Use the AMD Kintex-7 data sheet for complete electrical tables, pin definitions, configuration memory requirements, and design-tool-specific implementation details.
Alternativas drop-in para XC7K160T-3FBG484E — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC7K160T-3FBG484E (mesmo formato e footprint) — diferindo em Device Type, Speed Grade, Temperature Grade, Clock Management, Mounting Type.
XC7K160T-2FBG484E
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC7K160T-1FBG484E
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC7K160T-2FBG484I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7K160T-2FBG484C
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC7K160T-1FBG484I
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC7K160T-3FBG484E Classificações máximas e características elétricas
| Device Type | Kintex-7 FPGA |
| Logic Cells | 162,240 cells |
| Block RAM | 11,700 Kb |
| DSP Slices | 600 slices |
| User I/O | 285 I/O |
| Process Technology | 28 nm |
| Core Voltage | 1 V |
| Speed Grade | -3 |
| Temperature Grade | Extended (E) |
| Junction Temperature Range | 0 °C to 100 °C |
| Encapsulamento | FBG484, 484-ball FCBGA |
| Package Dimensions | 23 mm × 23 mm |
| Clock Management | MMCM and PLL resources |
| Tipo de montagem | Surface mount, ball-grid array |
| Programmable Logic | FPGA, field-programmable gate array |
| Status RoHS | Compliant |
| REACH Status | Compliant |
| DRC Status | Conflict Free |
| Maximum Number of I/O | 185 I/O in one listed package variant |
Guia de Configuração de Pinos do XC7K160T-3FBG484E 23 mm × 23 mm
Configuração de pinos para XC7K160T-3FBG484E (pacote 23 mm × 23 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC7K160T-3FBG484E.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC7K160T-3FBG484E é adequado para 6 aplicaçãos: High-Throughput Digital Signal Processing, Industrial Control and Automation, High-Speed Data Acquisition, Communications and Network Infrastructure, Video and Image Processing, Aerospace and Defense Prototyping.
High-Throughput Digital Signal Processing
The XC7K160T-3FBG484E fits parallel filtering, FFT, and digital-downconversion workloads because its 600 DSP slices can execute multiply-accumulate operations concurrently while 162,240 logic cells handle control and data routing. The -3 speed grade favors demanding clock domains, and the 11,700 Kb of block RAM supports coefficient storage, ping-pong buffers, and multi-channel sample handling. A typical implementation assigns fixed-point coefficients to block RAM and maps sample chains directly into DSP48 resources, reducing off-chip memory traffic and improving deterministic latency.
Recomendado
Industrial Control and Automation
Use the XC7K160T-3FBG484E for industrial controllers that combine deterministic parallel logic, multiple I/O, and dedicated DSP acceleration. Its 285 I/O sites support encoder capture, discrete control, fieldbus transceivers, and actuator feedback, while the extended-temperature E designation covers a 0 °C to 100 °C junction range. Place machine-safety logic and real-time control paths in dedicated clock regions, and use the industrial-grade alternative when the application requires the specific I temperature qualification rather than the extended designation.
Recomendado
High-Speed Data Acquisition
The XC7K160T-3FBG484E is suitable for parallel ADC capture, waveform processing, and real-time analysis because programmable I/O can accommodate multiple data buses and 600 DSP slices can perform filtering without repeated processor intervention. The 11,700 Kb of block RAM provides local buffering for simultaneous channels, while the -3 grade supports demanding acquisition-clock rates. Engineers should constrain input and output delays carefully and use synchronous interfaces to prevent timing skew from degrading the captured data.
Recomendado
Communications and Network Infrastructure
The XC7K160T-3FBG484E can implement packet classification, queuing, traffic shaping, and protocol conversion in parallel within a communications system. Its large logic-cell count and block RAM support multiple buffered data paths, and programmable I/O provides flexible interfaces for network processors, serializers, and backplane links. The -3 performance grade is useful when timing margins are limited, although transceiver-based designs require attention to the exact Kintex-7 transceiver resources, package ball assignments, reference clocks, and board-level signal-integrity constraints.
Recomendado
Video and Image Processing
The XC7K160T-3FBG484E provides the parallel resources required for pixel pipelines, color conversion, scaling, and real-time image analytics. Its 600 DSP slices accelerate multiply-accumulate stages, while 11,700 Kb of block RAM can hold line buffers and frame-sized working data. Map each video timing domain to a clock-capable region, use dedicated I/O resources where required, and verify video timing through static timing analysis. The -3 grade can improve margin in multi-stage pixel pipelines compared with lower Kintex-7 speed grades.
Recomendado
Aerospace and Defense Prototyping
The XC7K160T-3FBG484E supports configurable logic, DSP, and memory for prototype avionics, telemetry, radar signal conditioning, and test systems. The extended-temperature E designation covers junctions from 0 °C to 100 °C, while the -3 grade provides additional timing margin for complex pipelines. For flight hardware, confirm the exact procurement and qualification route with AMD, apply derating appropriate to the deployment, and review radiation, reliability, and long-term-supply requirements separately from ordinary commercial FPGA selection.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC7K160T-3FBG484E — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC7K160T-2FBG484E | XC7K160T-1FBG484E | XC7K160T-2FBG484I | XC7K160T-2FBG484C | XC7K160T-1FBG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FBG484 (484-FCBGA) | FBG484 (484-FCBGA) | FBG484 (484-FCBGA) | FBG484 (484-FCBGA) | FBG484 (484-FCBGA) | FBG484 (484-FCBGA) |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Speed Grade | -3 | -2 | -1 | -2 | -2 | -1 |
| Temperature Designation | E (extended) | E (extended) | E (extended) | I (industrial) | C (commercial) | I (industrial) |
| Logic Cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells |
| Block RAM | 11,700 Kb | 11,700 Kb | 11,700 Kb | 11,700 Kb | 11,700 Kb | 11,700 Kb |
| DSP Slices | 600 slices | 600 slices | 600 slices | 600 slices | 600 slices | 600 slices |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| User I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O | 285 I/O |
Principais diferenciais
- Higher performance grade within the same XC7K160T family (vs XC7K160T-2FBG484E)
- Extended-temperature device designation (vs XC7K160T-2FBG484C)
- Substantial parallel processing resources (vs XC7A100T-1FGG484C)
- Footprint-compatible sourcing path with identical silicon resources (vs XC7K160T-2FBG484I)
Notas de projeto
Treat the FBG484 land pattern as a high-density BGA layout rather than a generic 484-ball footprint. Use the AMD package drawing and board-design guidance for pad size, solder-mask definition, and via geometry. Place the FPGA close to its memory and high-speed interfaces, keep decoupling connections extremely short, and route configuration, clock, and serial signals away from noisy switching nodes. Validate the assembled board with X-ray inspection because hidden solder bridges under a large BGA cannot be detected visually.
Estimated: at a 1 V core voltage, the core current equals the core power in watts, so 1.5 W of core loss requires about 1.5 A. Convert that result into junction rise using the effective thermal resistance of the actual PCB and enclosure, then compare it with the 100 °C maximum junction rating. Copper spreading, thermal vias, airflow, and adjacent heat sources can materially change the result. Run worst-case post-route activity estimates and enforce thermal derating at the system level.
Separate core, I/O, and auxiliary supply planning into distinct power trees with appropriate filtering and local bulk capacitance. Place small ceramic capacitors on every supply ball or supply ball group according to the AMD decoupling guidance, and provide bulk charge close enough to the package to support high-current startup and switching. Confirm rail sequencing against the configuration requirements, and avoid relying on a single always-on supply for power states that the design expects to control externally.
Do not treat a lower-speed, same-package Kintex-7 ordering as an automatic equivalent. Changing from -3 to -2 or -1 alters timing margin and may cause a previously closed design to fail static timing. Changing from E to I or C also changes the environmental qualification profile. After any substitution, rerun synthesis and implementation with the exact new part selected, review clock uncertainty and I/O timing, and regenerate the programming files for the new ordering.
Informações de conformidade
RoHS compliant, REACH compliant, and listed with DRC Conflict Free status. AEC-Q100 is not applicable to this FPGA category, and separate lead-free or halogen-free claims were not established.