AMD

XC7K160T-L2FFG676I Low-Power Kintex-7 FPGA | AMD

N.º da peça: XC7K160T-L2FFG676I ✓ Ativo
0.95 V Vdss 676-pin FCBGA, 27 mm x 27 mm Package 470.37 MHz Speed
MOQ: 1 |

XC7K160T-L2FFG676I Visão geral

The AMD XC7K160T-L2FFG676I is a low-power Kintex-7 field-programmable gate array with 162,240 logic cells, 400 I/O, and 11,980,800 RAM bits, packaged in a 676-pin FCBGA. It is manufactured on 28 nm process technology and operates with a listed core-voltage range of 930 mV to 970 mV.

A field-programmable gate array is a semiconductor whose digital logic, interconnect, memory, and signal-processing blocks are configured after manufacture. FPGA architecture falls within programmable logic devices and combines configurable logic blocks, block RAM, DSP resources, programmable I/O, clock-management circuits, and dedicated configuration logic. This combination allows one physical device to implement control logic, high-speed interfaces, signal processing, or complete embedded systems.

The XC7K160T-L2FFG676I belongs to the Kintex-7 family and is identified by the -L2 low-power speed grade. The family provides 162,240 logic cells organized into 12,675 CLBs, 11,980,800 RAM bits, 400 user I/O, and clock-management resources including MMCM and PLL blocks. The 28 nm implementation supports a favorable balance between logic density, performance, and power for communications, industrial, instrumentation, and embedded-processing systems.

Its 676-ball FCBGA package provides a high-density interconnect for power, ground, configuration, clock, and user I/O. Because this is a complex BGA device, PCB layout must control ball-to-ball escape routing, power-plane geometry, via structures, and thermal spreading. The listed operating junction-temperature range is -40°C to 100°C for the related XC7K160T-2FFG676I ordering code, so system-level thermal verification remains essential.

Typical applications include high-speed serial-interface aggregation, industrial data acquisition, test-and-measurement control, embedded vision, communications infrastructure, and high-throughput DSP processing. The large logic and RAM resources allow parallel data paths and buffering, while the 400 I/O support external memory, high-speed transceivers, clocks, and control peripherals.

For a new design, confirm the complete power architecture, decoupling network, configuration interface, and FPGA package ball map in the AMD Kintex-7 documentation. Treat the -L2 suffix as a meaningful power and performance selection rather than a generic ordering variation. PCB changes should not be attempted unless the selected replacement has an explicitly verified, identical ball map and power architecture.

This product record combines the device's key logic, memory, I/O, process, package, and power-grade characteristics with replacement guidance and practical implementation considerations. It is intended to help engineers distinguish speed-grade, temperature-grade, package, and low-power differences before committing a board to a specific FPGA ordering code.

Alternativas drop-in para XC7K160T-L2FFG676I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com XC7K160T-L2FFG676I (mesmo formato e footprint) — diferindo em Package, Device Type, Maximum Clock Frequency, Temperature Grade, Logic Cells.

AMD
Package: 676-ball FCBGA
Maximum Clock Frequency: 1,098 MHz
Temperature Grade: Commercial
Comparar com XC7K160T-L2FFG676I →
AMD
Package: 676-pin FCBGA, 27 × 27 mm
Maximum Clock Frequency: 1098 MHz
Temperature Grade: Industrial
Comparar com XC7K160T-L2FFG676I →
AMD
Package: 676-pin FCBGA
Device Type: Kintex-7 field-programmable gate array
Temperature Grade: Commercial grade
Comparar com XC7K160T-L2FFG676I →
AMD
Package: 676-ball FCBGA
Device Type: Kintex-7 Field Programmable Gate Array
Comparar com XC7K160T-L2FFG676I →
AMD
Package: 676-BBGA, FCBGA
Logic Cells: 162240
Comparar com XC7K160T-L2FFG676I →

XC7K160T-2FFG676I

✅ Drop-In
AMD
📦 FCBGA-676 (FFG676)
Kintex-7 · 162240 · 11980800 bits · 600 · 400 · 676-BBGA, FCBGA · -2 · -40°C to +100°C

Consulte o preço

Ver ficha técnica →

XC7K160T-2FFG676C

✅ Drop-In
AMD
📦 FCBGA-676 (FFG676)
Kintex-7 Field Programmable Gate Array · 162,240 cells · 400 I/Os · 470.37 MHz · 28 nm · 970 mV to 1.03 V · 676-ball FCBGA · -2

Consulte o preço

Ver ficha técnica →

XC7K160T-1FFG676I

✅ Drop-In
AMD
📦 FCBGA-676 (FFG676)
Kintex-7 · 162,240 cells · 12,675 CLBs · 11,980,800 bits · 600 slices · 400 I/Os · 1098 MHz · 28 nm CMOS

Consulte o preço

Ver ficha técnica →

XC7K160T-1FFG676C

✅ Drop-In
📦 FCBGA-676 (FFG676)
Especificações compatíveis

Consulte o preço

XC7K160T-2FF676C

✅ Drop-In
AMD
📦 FCBGA-676 (FFG676)
Kintex-7 field-programmable gate array · 162,240 cells · 28 nm · 1 V · 400 I/O · 676-pin FCBGA · 676 balls · Surface mount

Consulte o preço

Ver ficha técnica →

XC7K160T-1FF676C

✅ Drop-In
AMD
📦 FCBGA-676 (FFG676)
Field-Programmable Gate Array (FPGA) · Kintex-7 · 162,240 cells · 12,675 CLBs · 28 nm · -1 · Commercial · 1 V

Consulte o preço

Ver ficha técnica →

XC7K160T-L2FFG676I Classificações máximas e características elétricas

Device Type Kintex-7 FPGA
Logic Cells 162,240 cells
Configurable Logic Blocks 12,675 CLBs
User I/O 400 I/O
Block RAM 11,980,800 bits
Process Technology 28 nm
Listed Core Voltage 0.95 V
Core Voltage Range 930 mV to 970 mV
Frequência máxima de clock 470.37 MHz
Clock Management MMCM and PLL resources
Encapsulamento 676-pin FCBGA, 27 mm x 27 mm
Package Type FCBGA-676
Tipo de montagem Surface mount
Shipping Format Tray
Temperatura de junção de operação -40°C to 100°C
Product Status Active
Programmable Logic 162,240 logic cells
FPGA Family Kintex-7

Guia de Configuração de Pinos do XC7K160T-L2FFG676I fcbga-676

Configuração de pinos para XC7K160T-L2FFG676I (pacote fcbga-676). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote fcbga-676 para XC7K160T-L2FFG676I

Nenhum dado detalhado de pinagem disponível para XC7K160T-L2FFG676I.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

XC7K160T-L2FFG676I é adequado para 6 aplicaçãos: Industrial Data Acquisition, High-Speed Communications, Test and Measurement, Embedded Vision Processing, Industrial Networking, Aerospace Ground Processing.

🏭

Industrial Data Acquisition

The XC7K160T-L2FFG676I fits industrial acquisition systems that combine parallel sensor inputs, control logic, and local buffering. Its 400 user I/O provide substantial connectivity for multiplexed sensor buses, digital interfaces, counters, and control signals, while 11,980,800 RAM bits can support sample buffering and packet assembly. The -L2 lower-power grade is useful when sustained acquisition activity must be balanced against thermal limits. Designers should partition high-rate interfaces into dedicated clock regions, constrain timing deliberately, and use the AMD Kintex-7 power-estimation workflow with realistic I/O and clock activity.

🌐

High-Speed Communications

The XC7K160T-L2FFG676I can support communications equipment requiring parallel data handling, clock recovery, protocol conversion, and high-speed I/O. Its 162,240 logic cells support parallel lanes and control state machines, while 400 I/O leave substantial connectivity for transceivers, reference clocks, and backplane interfaces. MMCM and PLL resources assist with clock management, and the 470.37 MHz listed clock figure provides a useful baseline for architecture planning. Actual line rate depends on the selected I/O standard, board-level channel loss, equalization, timing closure, and the transceiver used alongside the FPGA.

🔧

Test and Measurement

The XC7K160T-L2FFG676I is well matched to modular test equipment requiring deterministic timing, flexible digital sequencing, and broad instrument connectivity. The FPGA can implement acquisition pipelines, pattern generators, protocol bridges, trigger logic, and real-time analysis while its 11,980,800 RAM bits provide local storage. The -L2 grade's lower-power behavior can help when the instrument contains several FPGA-based boards. For accurate measurements, isolate analog and sensitive digital paths, provide low-jitter references, use controlled clocking, and include the instrument's loading and duty cycle in power analysis.

📷

Embedded Vision Processing

The XC7K160T-L2FFG676I can implement image acquisition, preprocessing, feature extraction, and system control in embedded vision equipment. Its 162,240 logic cells accommodate parallel pixel pipelines and control functions, while its large RAM capacity supports line buffers, frame windows, and lookup structures. The 400 I/O allow direct connection to image sensors, memory, and external processing devices. For industrial camera systems, place high-speed memory and sensor interfaces away from sensitive analog sections, control impedance continuously, and validate the clocking scheme against frame-rate and latency requirements before finalizing the PCB.

🌐

Industrial Networking

The XC7K160T-L2FFG676I supports industrial network equipment that must combine packet processing, protocol termination, traffic filtering, and deterministic control. Its 11,980,800 RAM bits can support packet buffers and descriptor structures, while 400 I/O provide high connectivity to network PHYs, management processors, and backplane devices. MMCM and PLL blocks can generate or recover clocks required by multiple traffic domains. The lower-power -L2 grade is advantageous in space-constrained edge appliances, but designers should still reserve separate power paths for sensitive PHY supplies and carefully control BGA return paths to limit crosstalk.

✈️

Aerospace Ground Processing

The XC7K160T-L2FFG676I can be evaluated for aerospace ground-support equipment that performs telemetry decoding, test sequencing, telemetry analysis, and simulation. Its large logic and RAM resources allow concurrent channels and buffering, while the lower-power -L2 grade may reduce thermal burden in compact ground units. The industrial-temperature suffix is distinct from aerospace qualification, so the final device grade must be selected through the program-specific qualification process. During implementation, provide redundant clock and configuration paths where required, protect configuration memory from unintended updates, and verify every power rail against the AMD power-distribution guidance.

What are the key specifications of XC7K160T-L2FFG676I that engineers should know?
The XC7K160T-L2FFG676I is a 28 nm Kintex-7 FPGA with 162,240 logic cells, 12,675 CLBs, 11,980,800 RAM bits, 400 user I/O, and a 676-pin FCBGA package. According to the AMD Kintex-7 documentation, the -L2 designation identifies the lower-power speed grade, while the listed core voltage is 0.95 V within a 930 mV to 970 mV range. These figures establish the device's logic capacity, memory resources, package density, and power-grade position.
Where can I download the XC7K160T-L2FFG676I datasheet PDF?
The XC7K160T-L2FFG676I datasheet can be accessed through the AMD/Xilinx Kintex-7 documentation linked on this page. The product documentation covers the 162,240-cell device, 28 nm process technology, 676-pin FCBGA package, speed grades, electrical characteristics, and package information. Use the exact ordering code when consulting configuration, pinout, and power guidance because the L2 speed grade and industrial-temperature suffix affect part-specific requirements.
Where can I find the XC7K160T-L2FFG676I pinout and package ball map?
The XC7K160T-L2FFG676I pin and ball assignments are located in the package-specific tables and diagrams in the AMD Kintex-7 documentation. The device uses a 676-pin FCBGA package, so its connection map is too dense to reproduce reliably outside the manufacturer document. Before assigning power, ground, configuration pins, clocks, and user I/O, compare the complete ball map and pin definitions for the exact L2 and industrial ordering code.
What does the L2 in XC7K160T-L2FFG676I mean?
The L2 in XC7K160T-L2FFG676I identifies the Kintex-7 lower-power speed-grade option, which is screened for lower maximum static power and can use a lower core voltage than the ordinary -2 grade. AMD's Kintex-7 datasheet identifies -2L devices separately from -2 devices. The result is a device intended for power-conscious designs that retain the 162,240-cell Kintex-7 architecture and 676-pin FCBGA footprint.
Can XC7K160T-2FFG676I replace XC7K160T-L2FFG676I?
The XC7K160T-2FFG676I can serve as a same-package upgrade alternative, but it is not an exact functional substitute for the -L2 grade. Both devices provide 162,240 logic cells in the 676-pin FCBGA format, while the -2 grade normally has higher performance and power characteristics than the lower-power -L2 option. AMD also notes that Kintex-7 bitstream compatibility is a separate consideration, so verify the configuration design and thermal constraints before substitution.
What is the difference between XC7K160T-L2FFG676I and XC7K160T-2FFG676C?
The primary differences are the power-grade suffix and temperature-grade suffix. XC7K160T-L2FFG676I combines the lower-power -L2 grade with the industrial I suffix, while XC7K160T-2FFG676C uses the ordinary -2 speed grade and commercial C suffix. Both use the 676-pin FCBGA package and the same 162,240-cell Kintex-7 architecture, but performance, power, temperature coverage, and system qualification requirements must be reviewed before interchange.
When should I choose XC7K160T-L2FFG676I over XC7K160T-2FFG676I?
Choose XC7K160T-L2FFG676I when the design prioritizes lower static and dynamic power over maximum timing performance. The -L2 grade is screened for lower maximum static power and can operate at a lower core voltage than the ordinary -2 grade. Choose XC7K160T-2FFG676I instead when the design needs the additional performance margin of the -2 grade and can accommodate its corresponding power characteristics and thermal design.
Is XC7K160T-L2FFG676I suitable for high-speed signal processing?
The XC7K160T-L2FFG676I is suitable for parallel signal-processing and communications designs that benefit from 162,240 logic cells, 11,980,800 RAM bits, and 400 user I/O. Its listed clock resource support includes MMCM and PLL blocks, and the maximum listed clock frequency is 470.37 MHz. Actual interface throughput depends on the selected I/O standard, PCB topology, timing constraints, memory interface, and clocking architecture.
What are the practical power and thermal considerations for XC7K160T-L2FFG676I?
The primary thermal challenge is dissipating power from a 28 nm FPGA housed in a 676-ball FCBGA while maintaining the listed -40°C to 100°C junction-temperature range. The L2 grade reduces power relative to the ordinary -2 grade, but configuration density, I/O activity, clocking, and utilization still affect actual consumption. Use the AMD power-estimation workflow with the final clock and utilization assumptions, then provide uninterrupted supply and ground planes with a low-impedance thermal path.
Where to buy XC7K160T-L2FFG676I online?
Use the Request a Quote form on this page to request availability, lead time, and order handling for the XC7K160T-L2FFG676I. The form should be completed with the exact ordering code XC7K160T-L2FFG676I, FCBGA-676 package, and required tray presentation. Because this is a complex FPGA with exact configuration and temperature-grade requirements, confirm the full MPN before accepting an order.
What is the price of XC7K160T-L2FFG676I?
The current XC7K160T-L2FFG676I price is not stated on this page. Submit the Request a Quote form with the exact MPN XC7K160T-L2FFG676I to receive a current quotation and quantity-break review. The order should identify the 676-pin FCBGA package and the L2 industrial-temperature ordering option so the quotation corresponds to the required device rather than a related Kintex-7 configuration.
What is the lead time and stock status for XC7K160T-L2FFG676I?
Current stock and lead time for XC7K160T-L2FFG676I should be confirmed through the Request a Quote form on this page. Include the desired quantity, packaging presentation, and target delivery date in the request. The device is identified as a 676-pin FCBGA Kintex-7 FPGA in tray presentation, and an exact ordering-code check is essential before committing a delivery schedule.
What can replace XC7K160T-L2FFG676I?
The closest same-package replacements are other XC7K160T variants using the 676-ball FCBGA, including XC7K160T-2FFG676I, XC7K160T-1FFG676I, XC7K160T-2FFG676C, XC7K160T-1FFG676C, and XC7K160T-2FF676C. Their speed and temperature suffixes are not electrically or qualification-equivalent to the L2 industrial grade. Verify the ball map, power architecture, timing constraints, configuration compatibility, and qualification requirements before treating any variant as a drop-in replacement.
What is the best AMD equivalent for XC7K160T-L2FFG676I?
The best AMD-family alternatives are XC7K160T-2FFG676I and XC7K160T-1FFG676I because they retain the Kintex-7 160T device and 676-pin FCBGA architecture. The -2 option has a lower speed grade than -1, while both ordinary grades generally trade higher performance for greater power demand than the L2 part. Neither should be selected solely by package name; confirm timing, temperature grade, bitstream behavior, and power requirements in the AMD documentation.
Is XC7K160T-L2FFG676I active and RoHS compliant?
The related XC7K160T-2FFG676I is listed as active, indicating that the Kintex-7 family remains commercially supported, but the exact lifecycle and compliance declarations for XC7K160T-L2FFG676I should be confirmed with AMD. A separate AMD support result concerning lead content indicates that not every XC7K160T ordering option carries the same RoHS status. Use the manufacturer's product declaration for the exact MPN before treating the device as RoHS compliant.

Dados de referência de engenharia para XC7K160T-L2FFG676I — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose XC7K160T-L2FFG676I when the design needs the full Kintex-7 160T capacity of 162,240 logic cells and 11,980,800 RAM bits while prioritizing the lower-power -L2 grade and industrial-temperature suffix. It is a strong fit for power-sensitive industrial, communications, acquisition, and test systems where the ordinary -2 grade's additional performance is unnecessary. Choose XC7K160T-2FFG676I when you need more timing margin than the L2 grade and can manage the power increase; it is also the closest same-package upgrade for a design that misses timing. Choose XC7K160T-1FFG676I for the fastest listed family option, accepting higher power and thermal requirements. Commercial C-suffix alternatives are appropriate only when their temperature range satisfies the application. In every case, verify the exact ball map, power architecture, configuration compatibility, timing, and lifecycle requirements before approving a replacement.

Comparação com alternativas

Parâmetro Este produto XC7K160T-2FFG676I XC7K160T-2FFG676C XC7K160T-1FFG676I XC7K160T-1FFG676C XC7K160T-2FF676C XC7K160T-1FF676C
Brand AMD AMD AMD AMD AMD AMD AMD
Package FCBGA-676 (FFG676) FCBGA-676 (FFG676) FCBGA-676 (FFG676) FCBGA-676 (FFG676) FCBGA-676 (FFG676) FCBGA-676 FCBGA-676
FPGA Family Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
Speed Grade -L2 lower-power grade -2 grade -2 grade -1 grade -1 grade -2 grade -1 grade
Temperature Grade Industrial I suffix Industrial I suffix Commercial C suffix Industrial I suffix Commercial C suffix Commercial C suffix Commercial C suffix

Principais diferenciais

  • Lower-power Kintex-7 speed grade (vs XC7K160T-2FFG676I)
  • Industrial-temperature ordering option (vs XC7K160T-2FFG676C)
  • Lower power than the faster -1 grade (vs XC7K160T-1FFG676I)
  • Identical logic and memory architecture (vs XC7K160T-2FF676C)

Notas de projeto

Evaluate the -L2 grade using the final clock plan, I/O standards, memory activity, and design utilization. The AMD Kintex-7 datasheet identifies -2L devices as lower-power alternatives to -2 devices, but actual consumption still changes with logic toggling and I/O activity. Use the manufacturer's power estimator rather than assuming the suffix alone determines dissipation. Separate the core, auxiliary, I/O, and analog-supply requirements as directed by the package power guide.

Design the 676-ball FCBGA footprint and escape routing from the exact package drawing, paying particular attention to ball pitches, power and ground balls, and exposed thermal features. Use uninterrupted power and ground planes, a dense via field beneath the device, and short return paths for high-speed I/O. Do not substitute an FF or FBG package drawing solely because all variants contain 676 balls; package suffix changes can alter the ball map or thermal land pattern.

Calculate junction temperature from worst-case FPGA power, the board-dependent junction-to-ambient thermal resistance, and the selected ambient temperature. Although the -L2 grade can reduce power relative to the ordinary -2 grade, a 676-ball FPGA can still require substantial copper area and via connectivity. Validate the assembled board in its enclosure and account for neighboring heat sources; package thermal characterization on a development board may not represent the final system.

Do not treat speed-grade, temperature-grade, or package-code changes as automatically interchangeable. The -L2, -2, and -1 suffixes affect timing and power behavior, while I and C identify different temperature grades. AMD separately addresses Kintex-7 bitstream compatibility, so an existing bitstream should not be assumed to work unchanged with another grade. Review configuration compatibility, pin constraints, timing margins, and qualification before substitution.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Exact-MPN RoHS and REACH status was not established. An AMD support result for a related XC7K160T ordering code states that it is not RoHS compliant, so compliance must not be assumed for XC7K160T-L2FFG676I.

Buscas relacionadas

xc7k160t l2ffg676i xc7k160t 2ffg676i xc7k160t 1ffg676i xc7k160t ffg676 xc7k160t datasheet xc7k160t l2ffg676i datasheet pdf xc7k160t l2ffg676i pinout xc7k160t l2ffg676i equivalent xc7k160t l2ffg676i replacement xc7k160t l2ffg676i footprint AMD XC7K160T-L2FFG676I XC7K160T-L2FFG676I 162240 cells XC7K160T-L2FFG676I FCBGA-676 XC7K160T-L2FFG676I price XC7K160T-L2FFG676I vs XC7K160T-2FFG676I

Componentes & termos relacionados

AMD Xilinx XC7K160T-L2FFG676I XC7K160T-2FFG676I XC7K160T-2FFG676C XC7K160T-1FFG676I XC7K160T-1FFG676C Kintex-7 FPGA field-programmable gate array programmable logic device configurable logic block block RAM MMCM PLL 28 nm process technology FCBGA-676 676-pin FCBGA surface-mount semiconductor industrial temperature grade lower-power speed grade bitstream compatibility signal processing industrial data acquisition
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ