XC7K160T-L2FFG676I Low-Power Kintex-7 FPGA | AMD
MPN: XC7K160T-L2FFG676I ✓ 啟用中XC7K160T-L2FFG676I 概覽
A field-programmable gate array is a semiconductor whose digital logic, interconnect, memory, and signal-processing blocks are configured after manufacture. FPGA architecture falls within programmable logic devices and combines configurable logic blocks, block RAM, DSP resources, programmable I/O, clock-management circuits, and dedicated configuration logic. This combination allows one physical device to implement control logic, high-speed interfaces, signal processing, or complete embedded systems.
The XC7K160T-L2FFG676I belongs to the Kintex-7 family and is identified by the -L2 low-power speed grade. The family provides 162,240 logic cells organized into 12,675 CLBs, 11,980,800 RAM bits, 400 user I/O, and clock-management resources including MMCM and PLL blocks. The 28 nm implementation supports a favorable balance between logic density, performance, and power for communications, industrial, instrumentation, and embedded-processing systems.
Its 676-ball FCBGA package provides a high-density interconnect for power, ground, configuration, clock, and user I/O. Because this is a complex BGA device, PCB layout must control ball-to-ball escape routing, power-plane geometry, via structures, and thermal spreading. The listed operating junction-temperature range is -40°C to 100°C for the related XC7K160T-2FFG676I ordering code, so system-level thermal verification remains essential.
Typical applications include high-speed serial-interface aggregation, industrial data acquisition, test-and-measurement control, embedded vision, communications infrastructure, and high-throughput DSP processing. The large logic and RAM resources allow parallel data paths and buffering, while the 400 I/O support external memory, high-speed transceivers, clocks, and control peripherals.
For a new design, confirm the complete power architecture, decoupling network, configuration interface, and FPGA package ball map in the AMD Kintex-7 documentation. Treat the -L2 suffix as a meaningful power and performance selection rather than a generic ordering variation. PCB changes should not be attempted unless the selected replacement has an explicitly verified, identical ball map and power architecture.
This product record combines the device's key logic, memory, I/O, process, package, and power-grade characteristics with replacement guidance and practical implementation considerations. It is intended to help engineers distinguish speed-grade, temperature-grade, package, and low-power differences before committing a board to a specific FPGA ordering code.
直接替換替代品,適用於 XC7K160T-L2FFG676I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7K160T-L2FFG676I (相同外形與佔位) — 差異在於 Package, Device Type, Maximum Clock Frequency, Temperature Grade, Logic Cells.
XC7K160T-2FFG676I
✅ 直接替換聯絡詢價
查看資料表 →XC7K160T-2FFG676C
✅ 直接替換聯絡詢價
查看資料表 →XC7K160T-1FFG676I
✅ 直接替換聯絡詢價
查看資料表 →XC7K160T-2FF676C
✅ 直接替換聯絡詢價
查看資料表 →XC7K160T-1FF676C
✅ 直接替換聯絡詢價
查看資料表 →XC7K160T-L2FFG676I 最大額定值與電氣特性
| Device Type | Kintex-7 FPGA |
| Logic Cells | 162,240 cells |
| Configurable Logic Blocks | 12,675 CLBs |
| User I/O | 400 I/O |
| Block RAM | 11,980,800 bits |
| Process Technology | 28 nm |
| Listed Core Voltage | 0.95 V |
| Core Voltage Range | 930 mV to 970 mV |
| 最大時脈頻率 | 470.37 MHz |
| Clock Management | MMCM and PLL resources |
| 封裝 | 676-pin FCBGA, 27 mm x 27 mm |
| Package Type | FCBGA-676 |
| 安裝類型 | Surface mount |
| Shipping Format | Tray |
| 工作接面溫度 | -40°C to 100°C |
| Product Status | Active |
| Programmable Logic | 162,240 logic cells |
| FPGA Family | Kintex-7 |
XC7K160T-L2FFG676I fcbga-676 腳位配置指南
XC7K160T-L2FFG676I(fcbga-676 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7K160T-L2FFG676I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7K160T-L2FFG676I 適用於 6 應用s: Industrial Data Acquisition, High-Speed Communications, Test and Measurement, Embedded Vision Processing, Industrial Networking, Aerospace Ground Processing.
Industrial Data Acquisition
The XC7K160T-L2FFG676I fits industrial acquisition systems that combine parallel sensor inputs, control logic, and local buffering. Its 400 user I/O provide substantial connectivity for multiplexed sensor buses, digital interfaces, counters, and control signals, while 11,980,800 RAM bits can support sample buffering and packet assembly. The -L2 lower-power grade is useful when sustained acquisition activity must be balanced against thermal limits. Designers should partition high-rate interfaces into dedicated clock regions, constrain timing deliberately, and use the AMD Kintex-7 power-estimation workflow with realistic I/O and clock activity.
推薦
High-Speed Communications
The XC7K160T-L2FFG676I can support communications equipment requiring parallel data handling, clock recovery, protocol conversion, and high-speed I/O. Its 162,240 logic cells support parallel lanes and control state machines, while 400 I/O leave substantial connectivity for transceivers, reference clocks, and backplane interfaces. MMCM and PLL resources assist with clock management, and the 470.37 MHz listed clock figure provides a useful baseline for architecture planning. Actual line rate depends on the selected I/O standard, board-level channel loss, equalization, timing closure, and the transceiver used alongside the FPGA.
推薦
Test and Measurement
The XC7K160T-L2FFG676I is well matched to modular test equipment requiring deterministic timing, flexible digital sequencing, and broad instrument connectivity. The FPGA can implement acquisition pipelines, pattern generators, protocol bridges, trigger logic, and real-time analysis while its 11,980,800 RAM bits provide local storage. The -L2 grade's lower-power behavior can help when the instrument contains several FPGA-based boards. For accurate measurements, isolate analog and sensitive digital paths, provide low-jitter references, use controlled clocking, and include the instrument's loading and duty cycle in power analysis.
推薦
Embedded Vision Processing
The XC7K160T-L2FFG676I can implement image acquisition, preprocessing, feature extraction, and system control in embedded vision equipment. Its 162,240 logic cells accommodate parallel pixel pipelines and control functions, while its large RAM capacity supports line buffers, frame windows, and lookup structures. The 400 I/O allow direct connection to image sensors, memory, and external processing devices. For industrial camera systems, place high-speed memory and sensor interfaces away from sensitive analog sections, control impedance continuously, and validate the clocking scheme against frame-rate and latency requirements before finalizing the PCB.
推薦
Industrial Networking
The XC7K160T-L2FFG676I supports industrial network equipment that must combine packet processing, protocol termination, traffic filtering, and deterministic control. Its 11,980,800 RAM bits can support packet buffers and descriptor structures, while 400 I/O provide high connectivity to network PHYs, management processors, and backplane devices. MMCM and PLL blocks can generate or recover clocks required by multiple traffic domains. The lower-power -L2 grade is advantageous in space-constrained edge appliances, but designers should still reserve separate power paths for sensitive PHY supplies and carefully control BGA return paths to limit crosstalk.
推薦
Aerospace Ground Processing
The XC7K160T-L2FFG676I can be evaluated for aerospace ground-support equipment that performs telemetry decoding, test sequencing, telemetry analysis, and simulation. Its large logic and RAM resources allow concurrent channels and buffering, while the lower-power -L2 grade may reduce thermal burden in compact ground units. The industrial-temperature suffix is distinct from aerospace qualification, so the final device grade must be selected through the program-specific qualification process. During implementation, provide redundant clock and configuration paths where required, protect configuration memory from unintended updates, and verify every power rail against the AMD power-distribution guidance.
推薦
推薦產品摘要
工程參考資料,適用於 XC7K160T-L2FFG676I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7K160T-2FFG676I | XC7K160T-2FFG676C | XC7K160T-1FFG676I | XC7K160T-1FFG676C | XC7K160T-2FF676C | XC7K160T-1FF676C |
|---|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FCBGA-676 (FFG676) | FCBGA-676 (FFG676) | FCBGA-676 (FFG676) | FCBGA-676 (FFG676) | FCBGA-676 (FFG676) | FCBGA-676 | FCBGA-676 |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -L2 lower-power grade | -2 grade | -2 grade | -1 grade | -1 grade | -2 grade | -1 grade |
| Temperature Grade | Industrial I suffix | Industrial I suffix | Commercial C suffix | Industrial I suffix | Commercial C suffix | Commercial C suffix | Commercial C suffix |
主要差異化特點
- Lower-power Kintex-7 speed grade (對比XC7K160T-2FFG676I)
- Industrial-temperature ordering option (對比XC7K160T-2FFG676C)
- Lower power than the faster -1 grade (對比XC7K160T-1FFG676I)
- Identical logic and memory architecture (對比XC7K160T-2FF676C)
設計說明
Evaluate the -L2 grade using the final clock plan, I/O standards, memory activity, and design utilization. The AMD Kintex-7 datasheet identifies -2L devices as lower-power alternatives to -2 devices, but actual consumption still changes with logic toggling and I/O activity. Use the manufacturer's power estimator rather than assuming the suffix alone determines dissipation. Separate the core, auxiliary, I/O, and analog-supply requirements as directed by the package power guide.
Design the 676-ball FCBGA footprint and escape routing from the exact package drawing, paying particular attention to ball pitches, power and ground balls, and exposed thermal features. Use uninterrupted power and ground planes, a dense via field beneath the device, and short return paths for high-speed I/O. Do not substitute an FF or FBG package drawing solely because all variants contain 676 balls; package suffix changes can alter the ball map or thermal land pattern.
Calculate junction temperature from worst-case FPGA power, the board-dependent junction-to-ambient thermal resistance, and the selected ambient temperature. Although the -L2 grade can reduce power relative to the ordinary -2 grade, a 676-ball FPGA can still require substantial copper area and via connectivity. Validate the assembled board in its enclosure and account for neighboring heat sources; package thermal characterization on a development board may not represent the final system.
Do not treat speed-grade, temperature-grade, or package-code changes as automatically interchangeable. The -L2, -2, and -1 suffixes affect timing and power behavior, while I and C identify different temperature grades. AMD separately addresses Kintex-7 bitstream compatibility, so an existing bitstream should not be assumed to work unchanged with another grade. Review configuration compatibility, pin constraints, timing margins, and qualification before substitution.
合規資訊
Exact-MPN RoHS and REACH status was not established. An AMD support result for a related XC7K160T ordering code states that it is not RoHS compliant, so compliance must not be assumed for XC7K160T-L2FFG676I.