XC7Z020-2CLG484E - 85K Zynq SoC, 766MHz | AMD
N.º da peça: XC7Z020-2CLG484E ✓ AtivoXC7Z020-2CLG484E Visão geral
A Zynq system-on-chip combines a programmable logic device with an embedded Arm processor in one silicon device. This integration places the processing system and FPGA fabric on the same die while retaining separate configuration, memory, peripheral, and I/O resources. The result is a platform suitable for systems that require both deterministic hardware acceleration and operating-system-capable application processing.
The XC7Z020 includes an FPGA fabric with 85K logic cells, supporting parallel hardware functions that can execute alongside the dual Arm Cortex-A9 cores. CoreSight provides integrated debug and trace support for software development and hardware-assisted verification. The CLG484 option offers 484 package balls in a 19 mm by 19 mm CSPBGA format for compact embedded-system designs.
The -2 device code denotes speed grade 2, while the E suffix identifies the extended-temperature ordering option associated with the product family. The listed operating-temperature range is 0 °C to +100 °C. The -2 speed grade reaches 766 MHz in the manufacturer listing, making it a mid-performance member of the Zynq-7000 range.
Typical uses include industrial control, camera and image processing, industrial networking, embedded data acquisition, communications equipment, and edge-processing systems. The Arm processor can control operating-system-level functions, while the programmable logic fabric can implement parallel data paths, custom interfaces, accelerators, or deterministic I/O handling.
PCB implementation requires careful BGA layout, power planning, decoupling, and thermal management. Designers should use the AMD package pinout files and the Zynq-7000 data sheet when assigning balls, memory interfaces, I/O standards, and power rails. Vivado-compatible constraints and the selected board device also need to match the exact ordering code before implementation begins.
This product record combines the verified device identity, package, operating information, alternate-ordering references, and practical engineering guidance. It also highlights where design decisions require the official AMD pinout files, power guidance, and timing documentation rather than generic package assumptions.
Alternativas drop-in para XC7Z020-2CLG484E — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC7Z020-2CLG484E (mesmo formato e footprint) — diferindo em Mounting Type, Package, Logic Cells, Speed Grade, FPGA Family.
XC7Z020-2CLG484I
✅ Drop-In✗ Fora de estoque
$49 / unidade
Ver ficha técnica →XC7Z020-1CLG484I
✅ Drop-In✓ Em estoque
$45.9375 / unidade
Ver ficha técnica →XC7Z020-1CLG484C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7Z020-1CLG400I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7Z020-3CLG484E
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7Z020-2CLG484E Classificações máximas e características elétricas
| Device Type | Zynq-7000 Artix-7 FPGA system-on-chip |
| Processing System | Dual-core ARM Cortex-A9 MPCore |
| Processor Maximum Frequency | 766 MHz |
| Programmable Logic | Artix-7 FPGA with 85K logic cells |
| Debug Support | CoreSight |
| Device Family | Zynq-7000 |
| Speed Grade | 2 |
| Temperature Grade | Extended |
| Faixa de temperatura de operação | 0 °C to +100 °C |
| Encapsulamento | 484-CSPBGA |
| Package Ball Count | 484 balls |
| Package Dimensions | 19 mm x 19 mm |
| Architecture | Heterogeneous ARM processor plus FPGA fabric |
| Digital Resolution | 12 bit |
| Tipo de montagem | Surface mount BGA |
Guia de Configuração de Pinos do XC7Z020-2CLG484E 19 mm x 19 mm
Configuração de pinos para XC7Z020-2CLG484E (pacote 19 mm x 19 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC7Z020-2CLG484E.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC7Z020-2CLG484E é adequado para 6 aplicaçãos: Industrial Vision Processing, Factory Automation Controllers, Embedded Network Gateways, Data Acquisition Systems, Embedded Communications Equipment, Camera and Inspection Systems.
Industrial Vision Processing
The XC7Z020-2CLG484E fits industrial vision systems that combine camera acquisition, control software, and parallel image processing. Its dual ARM Cortex-A9 cores at up to 766 MHz can manage configuration, networking, and application tasks, while the 85K-logic-cell FPGA fabric can accelerate pixel transport or fixed-function filtering. Integrating these functions on one SoC can reduce board count and avoid transferring large image frames between separate processors. The design trade-off is routing complexity: designers should partition work between software and programmable logic, use deterministic FPGA interfaces for real-time paths, and validate memory bandwidth, power, thermal rise, and timing closure before production.
Recomendado
Factory Automation Controllers
The XC7Z020-2CLG484E is well suited to factory automation controllers that combine supervisory control with precise I/O handling. The Arm Cortex-A9 cores can run communications, diagnostics, and configuration services, while the Artix-7 fabric can execute parallel logic, timing, or signal conditioning close to the I/O. Its 85K logic cells provide a moderate hardware-acceleration budget without moving every task into software. For industrial deployment, designers should preserve deterministic timing margins, isolate high-speed routing from sensitive interfaces, and document the operating-temperature assumptions of the selected ordering code against the enclosure environment.
Recomendado
Embedded Network Gateways
The XC7Z020-2CLG484E can act as the processing center of an embedded network gateway because it combines an Arm-compatible application processor with programmable FPGA logic. Software can manage protocol stacks, configuration, and management traffic, while the FPGA fabric can accelerate packet processing or implement custom physical-layer functions. The heterogeneous architecture allows hardware-critical paths to remain deterministic while higher-level functions use software. Board designers should evaluate memory bandwidth, Ethernet interface timing, sustained processor activity, and thermal conditions under the worst expected traffic load rather than relying on nominal processor frequency alone.
Recomendado
Data Acquisition Systems
The XC7Z020-2CLG484E supports data-acquisition systems that need flexible triggering, digital signal conditioning, and embedded analysis in one device. The 85K logic cells can implement parallel acquisition pipelines or protocol conversion, while the dual Cortex-A9 cores perform configuration, filtering, storage management, and host communication. This division of labor can shorten the path between captured samples and downstream processing. Engineers should define clock-domain boundaries, buffering depth, and back-pressure behavior early, then use static timing analysis and implemented-design measurements to verify throughput and deterministic latency.
Recomendado
Embedded Communications Equipment
The XC7Z020-2CLG484E is applicable to communications equipment requiring a software-configurable control plane and hardware-assisted data plane. Arm cores can manage protocol state and device administration, while the FPGA fabric can implement framing, filtering, or timing-sensitive transforms. Placing both functions in one SoC can simplify synchronization and reduce external component count. The architecture is most effective when designers create clear interfaces between hard real-time logic and non-deterministic software. Power budgeting, DDR routing, clock jitter, and sustained-throughput behavior must be evaluated in the target enclosure.
Recomendado
Camera and Inspection Systems
The XC7Z020-2CLG484E can combine camera control, image acquisition, and inspection logic within a compact embedded platform. The dual Arm Cortex-A9 cores can run user interface, image management, and reporting tasks, while the Artix-7 fabric can accelerate repetitive pixel operations or interface timing. This mixed hardware-software approach is useful when inspection latency must remain predictable but the application also needs flexibility. Design teams should avoid unrestricted bus contention between processors and FPGA logic, specify buffering for burst traffic, and validate the complete camera, memory, and thermal path under production workloads.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC7Z020-2CLG484E — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC7Z020-2CLG484I | XC7Z020-1CLG484I | XC7Z020-1CLG484C | XC7Z020-1CLG400I | XC7Z020-3CLG484E |
|---|---|---|---|---|---|---|
| Package | 484-CSPBGA (19 mm x 19 mm) | 484-CSPBGA | 484-CSPBGA | 484-CSPBGA | 400-CSPBGA; not footprint-compatible | 484-CSPBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| Speed Grade | 2 | 2 | 1 | 1 | 1 | 3 |
| Temperature Grade | Extended (E) | Industrial (I) | Industrial (I) | Commercial (C) | Industrial (I) | Extended (E) |
| Package Ball Count | 484 balls | 484 balls | 484 balls | 484 balls | 400 balls | 484 balls |
Principais diferenciais
- Higher speed grade within the same CLG484 footprint (vs XC7Z020-1CLG484I)
- Extended-temperature ordering option (vs XC7Z020-2CLG484I)
- Direct CLG484 package match with a faster grade option (vs XC7Z020-3CLG484E)
Notas de projeto
Use the AMD CLG484 package-device pinout files as the authority for every ball assignment. Start PCB placement around the processor, DDR, configuration, clock, and decoupling requirements, then preserve the escape paths described by the design guide. Do not infer CLG484-to-CLG400 compatibility from the shared XC7Z020 family name because the package ball counts differ and the PCB land pattern must match the physical package.
Implement separate power rails and local decoupling exactly as specified in the AMD Zynq-7000 data sheet and design-guide power recommendations. The FPGA fabric, processing system, I/O, and auxiliary supplies can have different current and sequencing requirements. Review static and dynamic power after implementation, because nominal 766 MHz operation does not represent worst-case switching activity. Validate rail sequencing and monitor voltage droop during processor startup and high FPGA utilization.
Estimated thermal planning should begin with the actual power dissipation produced by the implemented design and the board-specific junction-to-ambient thermal resistance. Neither value is fixed by the 766 MHz headline frequency, because utilization, I/O activity, memory traffic, and ambient temperature materially affect dissipation. Use the AMD power calculator and a board-level thermal model, then preserve maximum junction-temperature margin for the selected E-grade ordering option.
Do not select XC7Z020-1CLG400I as a drop-in alternative for XC7Z020-2CLG484E: its 400-ball package does not match the 484-ball land pattern. Likewise, speed-grade substitutions require fresh timing analysis even when the package is unchanged. After any ordering-code change, verify the Vivado target part, configuration settings, pin constraints, timing results, power constraints, and thermal assumptions as one complete design review.
Informações de conformidade
The available product records identify the device and package but do not explicitly establish RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for this ordering code. AEC-Q100 is treated as not applicable because this is an industrial FPGA SoC rather than an automotive-qualified ordering variant.