XC95108-7PQ100C - 108-Macrocell 5V ISP CPLD | AMD
N.º da peça: XC95108-7PQ100C ✓ AtivoXC95108-7PQ100C Visão geral
A CPLD is a programmable logic device that combines nonvolatile configuration storage with a structured array of programmable logic and interconnect resources. Within the product hierarchy, a CPLD sits below FPGAs but above individual gates: designs describe Boolean functions and interconnections at a higher level, while the integrated controller stores and reloads the configuration. The XC9500 family is suited to designs requiring deterministic 5 V operation, in-system reconfiguration, and moderate logic density.
Key features include 5 V FastFLASH technology, 10,000-cycle in-system program and erase endurance, operation up to 125 MHz, and support for parallel programming of multiple XC9500 devices. The -7 speed designation corresponds to a 7.5 ns pin-to-pin delay for the target ordering code. Its 108 macrocells and as many as 81 available user I/O pins provide substantial capacity for industrial control, peripheral interfacing, and embedded glue logic.
The device combines macrocell-based combinational and registered logic with flexible interconnect resources and nonvolatile configuration memory. Because the configuration is retained in flash, the circuit does not require a separate configuration PROM after programming. In-system programmability supports field updates, production programming, and parallel-device configuration when the board, pin assignment, and power architecture satisfy the datasheet requirements.
Typical uses include industrial automation controllers, legacy peripheral bridges, power and sequencing control, instrumentation interfaces, and embedded subsystem logic. Its 5 V supply environment and broad macrocell count are especially useful where modern programmable-logic families would add unnecessary migration complexity while older discrete-logic implementations would consume excessive board area.
Design with the manufacturer pin-description table and package drawing when assigning the 100-terminal footprint. Confirm the selected I/O standard, supply sequencing, programming interface, unused-pin treatment, and maximum operating conditions directly against the DS066 data sheet. Validate timing with the device speed grade and the external clock and interface constraints used by the target system.
This page consolidates the core device specifications, manufacturer documentation, sourcing guidance, and same-family drop-in options into one engineering reference. It also highlights the speed-grade and temperature-grade distinctions that determine whether an XC95108 variant can replace another without changing the PCB or redesigning the timing budget.
Alternativas drop-in para XC95108-7PQ100C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
XC95108-8PQ100C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC95108-6PQ100C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC95108-10PQ100C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC95108-7PQ100I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC95108-10PQ100I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC95108-7PQ100C Classificações máximas e características elétricas
| Device Type | In-System Programmable CPLD |
| Number of Macrocells | 108 macrocells |
| Usable Gates | 2,400 gates |
| User I/O Pins | 81 I/O pins |
| Pin-to-Pin Logic Delay | 7.5 ns |
| Maximum Counter Frequency | 125 MHz |
| Tensão de alimentação | 5 V |
| Programmable Technology | Advanced CMOS 5 V FastFLASH |
| Programming Type | In-System Programmable |
| Program and Erase Endurance | 10,000 cycles minimum |
| Parallel Programming | Supported |
| Temperature Grade | Commercial |
| Package Code | PQ100 |
| Package Type | HQFP |
| Terminal Count | 100 terminals |
| Package Shape | Rectangular |
| Lead Form | Gull wing |
| Tipo de montagem | Surface Mount |
| Status RoHS | RoHS Non-Compliant |
| Lead-Free Status | Contains Lead |
Guia de Configuração de Pinos do XC95108-7PQ100C rectangular
Configuração de pinos para XC95108-7PQ100C (pacote rectangular). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC95108-7PQ100C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC95108-7PQ100C é adequado para 6 aplicaçãos: Industrial Automation Control, Legacy Peripheral Interfacing, Power Control and Sequencing, Instrumentation Signal Conditioning, Medical and Diagnostic Control, Communications and Network Support.
Industrial Automation Control
The XC95108-7PQ100C is appropriate for consolidating sequencing logic, interlocks, state-machine control, and discrete I/O handling into one programmable device. Its 108 macrocells and approximately 2,400 usable gates provide enough architecture for structured control logic without the resource demands of an FPGA. The 7.5 ns pin-to-pin delay supports demanding combinational paths, while operation up to 125 MHz suits counters and clocked control functions. Its commercial temperature classification suits controlled indoor equipment, although the complete electrical and environmental requirements of the machine must still be verified.
Recomendado
Legacy Peripheral Interfacing
The XC95108-7PQ100C can bridge older parallel buses, status registers, interrupts, and control signals to a modern controller. Its available 81 user I/O pins provide practical interface capacity in a 100-terminal package, while the 7.5 ns speed grade can accommodate registered datapaths and handshake logic. The in-system-programmable architecture also permits configuration updates after board assembly when the interface requirements evolve. Designers should assign pins from the official package data and budget external transceiver or level-shifter components where the CPLD I/O standard does not match the connected device.
Recomendado
Power Control and Sequencing
The XC95108-7PQ100C is suitable for power sequencing, relay-control logic, fault latching, and monitoring of multiple system rails. Its 108 macrocells can implement orderly startup relationships, timeout counters, interlocks, and status logic in one nonvolatile device. A maximum counter frequency of 125 MHz provides ample margin for supervisory timing functions, while the 7.5 ns pin-to-pin delay supports precise control paths. In high-voltage or high-current equipment, keep the CPLD logic separated from power-stage drivers and use appropriately rated isolation, gate-drive, and protection components.
Recomendado
Instrumentation Signal Conditioning
The XC95108-7PQ100C can implement instrumentation front-end control, calibration tables, digital filtering, status encoding, and communication formatting around mixed-signal or precision converter systems. The structured macrocell architecture is useful for repeatable logic and register control, and the 7.5 ns delay supports fast control loops around slower high-resolution data converters. The device does not replace analog front-end design, so amplifier selection, filtering, grounding, and reference accuracy remain separate engineering tasks. Timing verification should include converter latency, control settling requirements, and the I/O voltage compatibility of the selected package.
Recomendado
Medical and Diagnostic Control
The XC95108-7PQ100C can support supervisory control, sensor multiplexing, alarm logic, and deterministic subsystem sequencing in medical or diagnostic equipment. Its nonvolatile configuration and 108 macrocells allow compact implementation of control functions beside a host processor. The 7.5 ns pin-to-pin delay and 125 MHz maximum counter frequency support fast digital monitoring, but the commercial temperature grade limits unrestricted deployment in extended-temperature environments. Safety-critical designs require the applicable risk analysis, electrical qualification, documentation, and component-selection processes beyond ordinary CPLD timing verification.
Recomendado
Communications and Network Support
The XC95108-7PQ100C can implement protocol framing, channel control, command decode, status aggregation, and line-interface control for established communications equipment. Its 81 available user I/O pins are useful for parallel data buses and control signals, while the 7.5 ns speed grade supports deterministic combinational and registered logic. The 5 V supply and 108 macrocells make the device particularly suitable for legacy systems that would be unnecessarily complex to migrate. Signal-integrity analysis remains essential at board edges, and clock distribution, termination, grounding, and impedance control should follow the interface requirements of the connected link.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC95108-7PQ100C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC95108-8PQ100C | XC95108-6PQ100C | XC95108-10PQ100C | XC95108-7PQ100I | XC95108-10PQ100I |
|---|---|---|---|---|---|---|
| Package | PQ100 | PQ100 | PQ100 | PQ100 | PQ100 | PQ100 |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Type | In-System Programmable CPLD | In-System Programmable CPLD | In-System Programmable CPLD | In-System Programmable CPLD | In-System Programmable CPLD | In-System Programmable CPLD |
| Pin-to-Pin Logic Delay | 7.5 ns | 8 ns | 6 ns | 10 ns | 7.5 ns | 10 ns |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial | Industrial | Industrial |
| Number of Macrocells | 108 macrocells | 108 macrocells | 108 macrocells | 108 macrocells | 108 macrocells | 108 macrocells |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Programming Type | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable |
Principais diferenciais
- Provides additional timing margin while retaining the same 108-macrocell architecture (vs XC95108-6PQ100C)
- Matches the target speed grade while supporting a different temperature classification (vs XC95108-7PQ100I)
- Maintains the same logical capacity and footprint when lower timing performance is acceptable (vs XC95108-10PQ100C)
Notas de projeto
Use the AMD DS066 package drawing and pin-description table when assigning the 100-terminal PQ100 footprint. Keep power and ground connectivity on dedicated pins, preserve the documented input and output grouping, and avoid introducing long stubs between external devices and programmable inputs. Because the board may already exist, compare every assigned pin and power location against the alternative ordering code before treating a family variant as a drop-in replacement.
Do not select a replacement solely by package code. A correct PQ100 footprint does not guarantee that the slower or faster speed grade preserves external timing, nor that a commercial-grade part meets industrial temperature requirements. Recalculate every timing path against the candidate's pin-to-pin delay, verify operating limits, and confirm that in-system programming signals, pull components, and configuration behavior remain unchanged.
For external buses or clocked interfaces, minimize clock skew and isolate the CPLD from noisy power stages. Place termination and any required series damping close to the driver or receiver, use a continuous ground reference beneath high-speed routes, and avoid routing sensitive signals across switching-node or relay-drive areas. The 125 MHz maximum counter frequency is a device capability, not a guarantee that an arbitrary board-level interface will operate at that rate.
Informações de conformidade
The target part is identified as RoHS non-compliant and as containing lead. No qualifying information is stated for REACH, halogen-free status, conflict minerals, or AEC-Q100 qualification.