AMD

XC95108-7PQ100C - 108-Macrocell 5V ISP CPLD | AMD

MPN: XC95108-7PQ100C ✓ Hoạt động
5 V Vdss PQ100 Package 125 MHz Speed
MOQ: 1 |

XC95108-7PQ100C Tóm tắt

The AMD XC95108-7PQ100C is a 108-macrocell, 5 V in-system-programmable complex programmable logic device with a 7.5 ns pin-to-pin logic delay, up to 81 user I/O pins, and a 100-terminal HQFP package. It provides approximately 2,400 usable gates for implementing control, interface, and fixed logic without a mask change.

A CPLD is a programmable logic device that combines nonvolatile configuration storage with a structured array of programmable logic and interconnect resources. Within the product hierarchy, a CPLD sits below FPGAs but above individual gates: designs describe Boolean functions and interconnections at a higher level, while the integrated controller stores and reloads the configuration. The XC9500 family is suited to designs requiring deterministic 5 V operation, in-system reconfiguration, and moderate logic density.

Key features include 5 V FastFLASH technology, 10,000-cycle in-system program and erase endurance, operation up to 125 MHz, and support for parallel programming of multiple XC9500 devices. The -7 speed designation corresponds to a 7.5 ns pin-to-pin delay for the target ordering code. Its 108 macrocells and as many as 81 available user I/O pins provide substantial capacity for industrial control, peripheral interfacing, and embedded glue logic.

The device combines macrocell-based combinational and registered logic with flexible interconnect resources and nonvolatile configuration memory. Because the configuration is retained in flash, the circuit does not require a separate configuration PROM after programming. In-system programmability supports field updates, production programming, and parallel-device configuration when the board, pin assignment, and power architecture satisfy the datasheet requirements.

Typical uses include industrial automation controllers, legacy peripheral bridges, power and sequencing control, instrumentation interfaces, and embedded subsystem logic. Its 5 V supply environment and broad macrocell count are especially useful where modern programmable-logic families would add unnecessary migration complexity while older discrete-logic implementations would consume excessive board area.

Design with the manufacturer pin-description table and package drawing when assigning the 100-terminal footprint. Confirm the selected I/O standard, supply sequencing, programming interface, unused-pin treatment, and maximum operating conditions directly against the DS066 data sheet. Validate timing with the device speed grade and the external clock and interface constraints used by the target system.

This page consolidates the core device specifications, manufacturer documentation, sourcing guidance, and same-family drop-in options into one engineering reference. It also highlights the speed-grade and temperature-grade distinctions that determine whether an XC95108 variant can replace another without changing the PCB or redesigning the timing budget.

Bộ thay thế dễ dàng lắp đặt cho XC95108-7PQ100C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

XC95108-8PQ100C

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 PQ100
8 ns pin-to-pin delay versus 7.5 ns for XC95108-7PQ100C, a 0.5 ns increase; same 100-terminal PQ100 family footprint

📋 Tham chiếu thay thế (không có trong danh mục)

XC95108-6PQ100C

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 PQ100
6 ns pin-to-pin delay versus 7.5 ns for XC95108-7PQ100C, providing 1.5 ns additional timing margin; same 100-terminal PQ100 family footprint

📋 Tham chiếu thay thế (không có trong danh mục)

XC95108-10PQ100C

✅ Drop-In
📦 PQ100
10 ns pin-to-pin delay versus 7.5 ns for XC95108-7PQ100C, a 2.5 ns increase; same 100-terminal PQ100 family footprint

📋 Tham chiếu thay thế (không có trong danh mục)

XC95108-7PQ100I

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 PQ100
7.5 ns speed grade retained, with industrial temperature classification instead of the commercial grade of XC95108-7PQ100C; same 100-terminal PQ100 family footprint

📋 Tham chiếu thay thế (không có trong danh mục)

XC95108-10PQ100I

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 PQ100
10 ns pin-to-pin delay versus 7.5 ns, a 2.5 ns increase, with industrial temperature classification; same 100-terminal PQ100 family footprint

📋 Tham chiếu thay thế (không có trong danh mục)

XC95108-7PQ100C Tỷ lệ tối đa & tính chất điện

Device Type In-System Programmable CPLD
Number of Macrocells 108 macrocells
Usable Gates 2,400 gates
User I/O Pins 81 I/O pins
Pin-to-Pin Logic Delay 7.5 ns
Maximum Counter Frequency 125 MHz
Điện áp cung cấp 5 V
Programmable Technology Advanced CMOS 5 V FastFLASH
Programming Type In-System Programmable
Program and Erase Endurance 10,000 cycles minimum
Parallel Programming Supported
Temperature Grade Commercial
Package Code PQ100
Package Type HQFP
Terminal Count 100 terminals
Package Shape Rectangular
Lead Form Gull wing
Kiểu lắp đặt Surface Mount
Trạng thái RoHS RoHS Non-Compliant
Lead-Free Status Contains Lead

Hướng dẫn cấu hình chân XC95108-7PQ100C rectangular

Cấu hình chân cho XC95108-7PQ100C (rectangular gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân rectangular cho XC95108-7PQ100C

Không có dữ liệu chân cụ thể sẵn có cho XC95108-7PQ100C.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

XC95108-7PQ100C phù hợp cho 6 Áp dụngs: Industrial Automation Control, Legacy Peripheral Interfacing, Power Control and Sequencing, Instrumentation Signal Conditioning, Medical and Diagnostic Control, Communications and Network Support.

🏭

Industrial Automation Control

The XC95108-7PQ100C is appropriate for consolidating sequencing logic, interlocks, state-machine control, and discrete I/O handling into one programmable device. Its 108 macrocells and approximately 2,400 usable gates provide enough architecture for structured control logic without the resource demands of an FPGA. The 7.5 ns pin-to-pin delay supports demanding combinational paths, while operation up to 125 MHz suits counters and clocked control functions. Its commercial temperature classification suits controlled indoor equipment, although the complete electrical and environmental requirements of the machine must still be verified.

🔧

Legacy Peripheral Interfacing

The XC95108-7PQ100C can bridge older parallel buses, status registers, interrupts, and control signals to a modern controller. Its available 81 user I/O pins provide practical interface capacity in a 100-terminal package, while the 7.5 ns speed grade can accommodate registered datapaths and handshake logic. The in-system-programmable architecture also permits configuration updates after board assembly when the interface requirements evolve. Designers should assign pins from the official package data and budget external transceiver or level-shifter components where the CPLD I/O standard does not match the connected device.

⚡

Power Control and Sequencing

The XC95108-7PQ100C is suitable for power sequencing, relay-control logic, fault latching, and monitoring of multiple system rails. Its 108 macrocells can implement orderly startup relationships, timeout counters, interlocks, and status logic in one nonvolatile device. A maximum counter frequency of 125 MHz provides ample margin for supervisory timing functions, while the 7.5 ns pin-to-pin delay supports precise control paths. In high-voltage or high-current equipment, keep the CPLD logic separated from power-stage drivers and use appropriately rated isolation, gate-drive, and protection components.

🖥️

Instrumentation Signal Conditioning

The XC95108-7PQ100C can implement instrumentation front-end control, calibration tables, digital filtering, status encoding, and communication formatting around mixed-signal or precision converter systems. The structured macrocell architecture is useful for repeatable logic and register control, and the 7.5 ns delay supports fast control loops around slower high-resolution data converters. The device does not replace analog front-end design, so amplifier selection, filtering, grounding, and reference accuracy remain separate engineering tasks. Timing verification should include converter latency, control settling requirements, and the I/O voltage compatibility of the selected package.

💊

Medical and Diagnostic Control

The XC95108-7PQ100C can support supervisory control, sensor multiplexing, alarm logic, and deterministic subsystem sequencing in medical or diagnostic equipment. Its nonvolatile configuration and 108 macrocells allow compact implementation of control functions beside a host processor. The 7.5 ns pin-to-pin delay and 125 MHz maximum counter frequency support fast digital monitoring, but the commercial temperature grade limits unrestricted deployment in extended-temperature environments. Safety-critical designs require the applicable risk analysis, electrical qualification, documentation, and component-selection processes beyond ordinary CPLD timing verification.

🌐

Communications and Network Support

The XC95108-7PQ100C can implement protocol framing, channel control, command decode, status aggregation, and line-interface control for established communications equipment. Its 81 available user I/O pins are useful for parallel data buses and control signals, while the 7.5 ns speed grade supports deterministic combinational and registered logic. The 5 V supply and 108 macrocells make the device particularly suitable for legacy systems that would be unnecessarily complex to migrate. Signal-integrity analysis remains essential at board edges, and clock distribution, termination, grounding, and impedance control should follow the interface requirements of the connected link.

What are the key specifications of XC95108-7PQ100C that engineers should know?
The XC95108-7PQ100C is a 5 V, 108-macrocell in-system-programmable CPLD with a 7.5 ns pin-to-pin logic delay, up to 81 user I/O pins, and a 100-terminal HQFP package. According to the AMD DS066 data sheet, it offers approximately 2,400 usable gates, 10,000-cycle program and erase endurance, and operation up to 125 MHz. It also supports parallel programming of multiple XC9500 devices.
Where can I download the XC95108-7PQ100C datasheet PDF?
The official XC95108-7PQ100C data sheet is available from AMD as document DS066. The manufacturer document identifies the XC95108 in-system-programmable CPLD and was released on May 17, 2013 with revision 5.0. Use that document for the package drawing, pin descriptions, electrical limits, timing tables, and programming instructions.
Where can I find the XC95108 pinout?
The XC95108-7PQ100C pinout is documented in the AMD DS066 data sheet rather than on an individual distributor page. Use the package drawing and pin-description table to map the 100 HQFP terminals, power pins, configuration pins, and user I/O assignments. The target package is a rectangular, gull-wing HQFP with 100 terminals.
What is the XC95108-7PQ100C used for?
The XC95108-7PQ100C is used for moderate-density control logic, legacy peripheral interfacing, industrial automation, sequencing, and embedded subsystem support. Its 108 macrocells, as many as 81 user I/O pins, and 125 MHz maximum counter frequency make it suitable for consolidating gates and programmable state machines into one nonvolatile CPLD.
Is XC95108-7PQ100C in stock?
Current stock should be checked through the Request a Quote form on this page because inventory changes across channels and package quantities. The AMD DS066 data sheet confirms the device family and ordering code, but it does not establish live inventory. Submit the required quantity, packaging preference, and target delivery location with the request.
What is the price of XC95108-7PQ100C?
A current unit and volume price for XC95108-7PQ100C is provided through the Request a Quote form on this page. The quote should reflect the requested quantity and package configuration. This avoids publishing a stale price for an older programmable-logic device whose availability and sourcing terms can vary by production cycle.
What is the lead time for XC95108-7PQ100C?
The current lead time for XC95108-7PQ100C should be confirmed through the Request a Quote form on this page. Include the required quantity, date code target, and shipment destination in the request. Manufacturer lifecycle status alone does not determine available production capacity or delivery timing.
Can XC95108-8PQ100C replace XC95108-7PQ100C?
The XC95108-8PQ100C is a same-footprint, slower XC9500-family option that may be considered when the -7 timing margin is unnecessary. Its nominal pin-to-pin delay is 8 ns rather than the target's 7.5 ns, a difference of 0.5 ns. Final replacement approval still requires checking every external timing path against the actual design clock requirement.
What is the difference between XC95108-7PQ100C and XC95108-10PQ100C?
The primary difference is speed grade: the XC95108-7PQ100C has a 7.5 ns pin-to-pin delay, while the XC95108-10PQ100C is specified at 10 ns. The -10 option is therefore 2.5 ns slower at the pin-to-pin delay limit. Both occupy the 100-terminal PQ family package position, but existing timing margins must be checked before substitution.
When should I choose XC95108-7PQ100C instead of a slower XC95108 grade?
Choose XC95108-7PQ100C when the design has limited timing margin and requires the faster 7.5 ns pin-to-pin delay of the -7 grade. A slower grade may reduce timing margin in synchronous interfaces, counters, or control paths. The -7 device is also preferable when preserving the established XC95108-7 timing design avoids a broader timing requalification.
Is XC95108-7PQ100C suitable for industrial control applications?
The XC95108-7PQ100C is suitable for commercial-grade industrial control equipment when its electrical, environmental, and lifecycle limits meet the system requirements. Its 5 V supply, 108 macrocells, and up to 81 user I/O pins support control and interface logic. For extended-temperature equipment, verify an appropriate temperature grade and the full environmental specification.
What can replace XC95108-7PQ100C?
Same-family XC95108 speed grades in the PQ100 package are the closest candidates, including XC95108-8PQ100C, XC95108-6PQ100C, XC95108-10PQ100C, and XC95108-7PQ100I. Each substitution must preserve the 100-terminal footprint and meet the board's timing, temperature, lifecycle, and programming requirements. No verified cross-brand drop-in replacement was identified.
Is XC95108-7PQ100I the same as XC95108-7PQ100C?
No. The XC95108-7PQ100I retains the 7 speed grade and PQ100 package family but is an industrial-temperature ordering option, while XC95108-7PQ100C is commercial grade. The electrical logic function may be closely related, but the temperature classification and operating limits must be checked before using the I-grade part in a design qualified for the C-grade part.
How many I/O pins are available on XC95108-7PQ100C?
The XC95108-7PQ100C provides 81 user I/O pins in its specified package, according to the XC95108 data-sheet information. The underlying XC9500 architecture can support higher I/O counts in larger packages, but the available pin count on this ordering code is constrained by the 100-terminal PQ100 configuration and dedicated power and programming functions.
What does in-system programmable mean for XC95108-7PQ100C?
In-system programming means the XC95108-7PQ100C can be programmed or erased while mounted on the assembled circuit board rather than requiring a separate device programmer. According to AMD DS066, the nonvolatile configuration supports at least 10,000 program and erase cycles and permits parallel programming of multiple XC9500 devices. The board design must provide the required programming interface and power conditions.

Dữ liệu tham khảo kỹ thuật cho XC95108-7PQ100C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose XC95108-7PQ100C when an existing 5 V CPLD design requires the 7.5 ns speed grade, commercial-temperature classification, 108 macrocells, and the PQ100 package without changing its layout. Choose XC95108-6PQ100C when additional timing margin is valuable and the faster 6 ns grade is needed; choose XC95108-8PQ100C or XC95108-10PQ100C only after confirming that the slower timing still satisfies every external path. Use XC95108-7PQ100I when the same electrical speed grade is required in an industrial-temperature environment, and XC95108-10PQ100I for an industrial-temperature design with sufficient margin for its 10 ns delay. No verified cross-brand drop-in equivalent was identified, so the family-grade alternatives should not be treated as generic substitutions for unrelated CPLD architectures.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này XC95108-8PQ100C XC95108-6PQ100C XC95108-10PQ100C XC95108-7PQ100I XC95108-10PQ100I
Package PQ100 PQ100 PQ100 PQ100 PQ100 PQ100
Brand AMD AMD AMD AMD AMD AMD
Device Type In-System Programmable CPLD In-System Programmable CPLD In-System Programmable CPLD In-System Programmable CPLD In-System Programmable CPLD In-System Programmable CPLD
Pin-to-Pin Logic Delay 7.5 ns 8 ns 6 ns 10 ns 7.5 ns 10 ns
Temperature Grade Commercial Commercial Commercial Commercial Industrial Industrial
Number of Macrocells 108 macrocells 108 macrocells 108 macrocells 108 macrocells 108 macrocells 108 macrocells
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Programming Type In-System Programmable In-System Programmable In-System Programmable In-System Programmable In-System Programmable In-System Programmable

Bảo phân biệt quan trọng

  • Provides additional timing margin while retaining the same 108-macrocell architecture (vsXC95108-6PQ100C)
  • Matches the target speed grade while supporting a different temperature classification (vsXC95108-7PQ100I)
  • Maintains the same logical capacity and footprint when lower timing performance is acceptable (vsXC95108-10PQ100C)

Ghi chú thiết kế

Use the AMD DS066 package drawing and pin-description table when assigning the 100-terminal PQ100 footprint. Keep power and ground connectivity on dedicated pins, preserve the documented input and output grouping, and avoid introducing long stubs between external devices and programmable inputs. Because the board may already exist, compare every assigned pin and power location against the alternative ordering code before treating a family variant as a drop-in replacement.

Do not select a replacement solely by package code. A correct PQ100 footprint does not guarantee that the slower or faster speed grade preserves external timing, nor that a commercial-grade part meets industrial temperature requirements. Recalculate every timing path against the candidate's pin-to-pin delay, verify operating limits, and confirm that in-system programming signals, pull components, and configuration behavior remain unchanged.

For external buses or clocked interfaces, minimize clock skew and isolate the CPLD from noisy power stages. Place termination and any required series damping close to the driver or receiver, use a continuous ground reference beneath high-speed routes, and avoid routing sensitive signals across switching-node or relay-drive areas. The 125 MHz maximum counter frequency is a device capability, not a guarantee that an arbitrary board-level interface will operate at that rate.

Thông tin tuân thủ

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
No
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The target part is identified as RoHS non-compliant and as containing lead. No qualifying information is stated for REACH, halogen-free status, conflict minerals, or AEC-Q100 qualification.

Dữ liệu được xác minh vào: 2026-11-11 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

xc95108 datasheet xc95108 xilinx xc95108 pinout XC95108-7PQ100C datasheet XC95108-7PQ100C datasheet pdf XC95108-7PQ100C pinout XC95108-7PQ100C equivalent XC95108-7PQ100C replacement XC95108-7PQ100C footprint XC95108-7PQ100C application circuit AMD XC95108-7PQ100C XC95108-7PQ100C price XC95108-7PQ100C stock XC95108-7PQ100C vs XC95108-10PQ100C

Các bộ phận và thuật ngữ liên quan

AMD Xilinx XC95108-7PQ100C XC95108-8PQ100C XC95108-6PQ100C XC95108-10PQ100C XC95108-7PQ100I XC95108-10PQ100I CPLD complex programmable logic device FPGA programmable logic device nonvolatile configuration memory macrocell in-system programming ISP 5 V FastFLASH technology Advanced CMOS HQFP-100 PQ100 surface mount gull-wing package RoHS REACH AEC-Q100 DS066 125 MHz 7.5 ns pin-to-pin logic delay industrial control legacy peripheral interfacing
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ