XC95108-7PQ100C - 108-Macrocell 5V ISP CPLD | AMD
MPN: XC95108-7PQ100C ✓ فعالXC95108-7PQ100C نمای کلی
A CPLD is a programmable logic device that combines nonvolatile configuration storage with a structured array of programmable logic and interconnect resources. Within the product hierarchy, a CPLD sits below FPGAs but above individual gates: designs describe Boolean functions and interconnections at a higher level, while the integrated controller stores and reloads the configuration. The XC9500 family is suited to designs requiring deterministic 5 V operation, in-system reconfiguration, and moderate logic density.
Key features include 5 V FastFLASH technology, 10,000-cycle in-system program and erase endurance, operation up to 125 MHz, and support for parallel programming of multiple XC9500 devices. The -7 speed designation corresponds to a 7.5 ns pin-to-pin delay for the target ordering code. Its 108 macrocells and as many as 81 available user I/O pins provide substantial capacity for industrial control, peripheral interfacing, and embedded glue logic.
The device combines macrocell-based combinational and registered logic with flexible interconnect resources and nonvolatile configuration memory. Because the configuration is retained in flash, the circuit does not require a separate configuration PROM after programming. In-system programmability supports field updates, production programming, and parallel-device configuration when the board, pin assignment, and power architecture satisfy the datasheet requirements.
Typical uses include industrial automation controllers, legacy peripheral bridges, power and sequencing control, instrumentation interfaces, and embedded subsystem logic. Its 5 V supply environment and broad macrocell count are especially useful where modern programmable-logic families would add unnecessary migration complexity while older discrete-logic implementations would consume excessive board area.
Design with the manufacturer pin-description table and package drawing when assigning the 100-terminal footprint. Confirm the selected I/O standard, supply sequencing, programming interface, unused-pin treatment, and maximum operating conditions directly against the DS066 data sheet. Validate timing with the device speed grade and the external clock and interface constraints used by the target system.
This page consolidates the core device specifications, manufacturer documentation, sourcing guidance, and same-family drop-in options into one engineering reference. It also highlights the speed-grade and temperature-grade distinctions that determine whether an XC95108 variant can replace another without changing the PCB or redesigning the timing budget.
جایگزینهای drop-in برای XC95108-7PQ100C — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
XC95108-8PQ100C
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC95108-6PQ100C
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC95108-10PQ100C
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC95108-7PQ100I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC95108-10PQ100I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC95108-7PQ100C حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | In-System Programmable CPLD |
| Number of Macrocells | 108 macrocells |
| Usable Gates | 2,400 gates |
| User I/O Pins | 81 I/O pins |
| Pin-to-Pin Logic Delay | 7.5 ns |
| Maximum Counter Frequency | 125 MHz |
| ولتاژ تغذیه | 5 V |
| Programmable Technology | Advanced CMOS 5 V FastFLASH |
| Programming Type | In-System Programmable |
| Program and Erase Endurance | 10,000 cycles minimum |
| Parallel Programming | Supported |
| Temperature Grade | Commercial |
| Package Code | PQ100 |
| Package Type | HQFP |
| Terminal Count | 100 terminals |
| Package Shape | Rectangular |
| Lead Form | Gull wing |
| نوع نصب | Surface Mount |
| وضعیت RoHS | RoHS Non-Compliant |
| Lead-Free Status | Contains Lead |
راهنمای پیکربندی پین XC95108-7PQ100C rectangular
پیکربندی پین برای XC95108-7PQ100C (پکیج rectangular). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC95108-7PQ100C.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC95108-7PQ100C مناسب است برای 6 کاربردs: Industrial Automation Control, Legacy Peripheral Interfacing, Power Control and Sequencing, Instrumentation Signal Conditioning, Medical and Diagnostic Control, Communications and Network Support.
Industrial Automation Control
The XC95108-7PQ100C is appropriate for consolidating sequencing logic, interlocks, state-machine control, and discrete I/O handling into one programmable device. Its 108 macrocells and approximately 2,400 usable gates provide enough architecture for structured control logic without the resource demands of an FPGA. The 7.5 ns pin-to-pin delay supports demanding combinational paths, while operation up to 125 MHz suits counters and clocked control functions. Its commercial temperature classification suits controlled indoor equipment, although the complete electrical and environmental requirements of the machine must still be verified.
پیشنهادی
Legacy Peripheral Interfacing
The XC95108-7PQ100C can bridge older parallel buses, status registers, interrupts, and control signals to a modern controller. Its available 81 user I/O pins provide practical interface capacity in a 100-terminal package, while the 7.5 ns speed grade can accommodate registered datapaths and handshake logic. The in-system-programmable architecture also permits configuration updates after board assembly when the interface requirements evolve. Designers should assign pins from the official package data and budget external transceiver or level-shifter components where the CPLD I/O standard does not match the connected device.
پیشنهادی
Power Control and Sequencing
The XC95108-7PQ100C is suitable for power sequencing, relay-control logic, fault latching, and monitoring of multiple system rails. Its 108 macrocells can implement orderly startup relationships, timeout counters, interlocks, and status logic in one nonvolatile device. A maximum counter frequency of 125 MHz provides ample margin for supervisory timing functions, while the 7.5 ns pin-to-pin delay supports precise control paths. In high-voltage or high-current equipment, keep the CPLD logic separated from power-stage drivers and use appropriately rated isolation, gate-drive, and protection components.
پیشنهادی
Instrumentation Signal Conditioning
The XC95108-7PQ100C can implement instrumentation front-end control, calibration tables, digital filtering, status encoding, and communication formatting around mixed-signal or precision converter systems. The structured macrocell architecture is useful for repeatable logic and register control, and the 7.5 ns delay supports fast control loops around slower high-resolution data converters. The device does not replace analog front-end design, so amplifier selection, filtering, grounding, and reference accuracy remain separate engineering tasks. Timing verification should include converter latency, control settling requirements, and the I/O voltage compatibility of the selected package.
پیشنهادی
Medical and Diagnostic Control
The XC95108-7PQ100C can support supervisory control, sensor multiplexing, alarm logic, and deterministic subsystem sequencing in medical or diagnostic equipment. Its nonvolatile configuration and 108 macrocells allow compact implementation of control functions beside a host processor. The 7.5 ns pin-to-pin delay and 125 MHz maximum counter frequency support fast digital monitoring, but the commercial temperature grade limits unrestricted deployment in extended-temperature environments. Safety-critical designs require the applicable risk analysis, electrical qualification, documentation, and component-selection processes beyond ordinary CPLD timing verification.
پیشنهادی
Communications and Network Support
The XC95108-7PQ100C can implement protocol framing, channel control, command decode, status aggregation, and line-interface control for established communications equipment. Its 81 available user I/O pins are useful for parallel data buses and control signals, while the 7.5 ns speed grade supports deterministic combinational and registered logic. The 5 V supply and 108 macrocells make the device particularly suitable for legacy systems that would be unnecessarily complex to migrate. Signal-integrity analysis remains essential at board edges, and clock distribution, termination, grounding, and impedance control should follow the interface requirements of the connected link.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC95108-7PQ100C — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC95108-8PQ100C | XC95108-6PQ100C | XC95108-10PQ100C | XC95108-7PQ100I | XC95108-10PQ100I |
|---|---|---|---|---|---|---|
| Package | PQ100 | PQ100 | PQ100 | PQ100 | PQ100 | PQ100 |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Type | In-System Programmable CPLD | In-System Programmable CPLD | In-System Programmable CPLD | In-System Programmable CPLD | In-System Programmable CPLD | In-System Programmable CPLD |
| Pin-to-Pin Logic Delay | 7.5 ns | 8 ns | 6 ns | 10 ns | 7.5 ns | 10 ns |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial | Industrial | Industrial |
| Number of Macrocells | 108 macrocells | 108 macrocells | 108 macrocells | 108 macrocells | 108 macrocells | 108 macrocells |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Programming Type | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable |
تفاوتهای کلیدی
- Provides additional timing margin while retaining the same 108-macrocell architecture (در مقابلXC95108-6PQ100C)
- Matches the target speed grade while supporting a different temperature classification (در مقابلXC95108-7PQ100I)
- Maintains the same logical capacity and footprint when lower timing performance is acceptable (در مقابلXC95108-10PQ100C)
یادداشتهای طراحی
Use the AMD DS066 package drawing and pin-description table when assigning the 100-terminal PQ100 footprint. Keep power and ground connectivity on dedicated pins, preserve the documented input and output grouping, and avoid introducing long stubs between external devices and programmable inputs. Because the board may already exist, compare every assigned pin and power location against the alternative ordering code before treating a family variant as a drop-in replacement.
Do not select a replacement solely by package code. A correct PQ100 footprint does not guarantee that the slower or faster speed grade preserves external timing, nor that a commercial-grade part meets industrial temperature requirements. Recalculate every timing path against the candidate's pin-to-pin delay, verify operating limits, and confirm that in-system programming signals, pull components, and configuration behavior remain unchanged.
For external buses or clocked interfaces, minimize clock skew and isolate the CPLD from noisy power stages. Place termination and any required series damping close to the driver or receiver, use a continuous ground reference beneath high-speed routes, and avoid routing sensitive signals across switching-node or relay-drive areas. The 125 MHz maximum counter frequency is a device capability, not a guarantee that an arbitrary board-level interface will operate at that rate.
اطلاعات انطباق
The target part is identified as RoHS non-compliant and as containing lead. No qualifying information is stated for REACH, halogen-free status, conflict minerals, or AEC-Q100 qualification.