Интегральные схемы

PIC32MX795F512LT-80V/BG

PIC32MX795F512LT-80V/BG - 80MHz 32-bit MCU, 512KB Flash | Microchip

The Microchip PIC32MX795F512LT-80V/BG is a 32-bit MIPS M4K microcontroller operating at 80 MHz (105 DMIPS) with 512 KB of Flash program memory and 128 KB of SRAM, housed in a 121-pin TFBGA (10x10 mm) package. The "LT" tape-and-reel suffix and "BG" package suffix designate a lead-free TFBGA variant specified for the -40C to +105C industrial/automotive temperature grade ("V"), while "L" indicates low-power. This PIC32MX5/6/7 family device integrates USB 2.0 On-The-Go with PHY, a 10/100 Ethernet MAC with MII/RMII, dual CAN 2.0b controllers, five I2C, four UART, four SPI, eight DMA channels, and a 16-bit parallel master port. A 32-bit MCU (microcontroller) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory, and a configurable set of peripherals into one IC. 32-bit MCUs sit above 8-bit/16-bit microcontrollers in the embedded hierarchy and are typically used in applications that require higher computational throughput, larger address spaces, or richer connectivity. PIC32 belongs to the MIPS-based M4K family and runs the same instruction set as larger MIPS processors, which eases code portability. Key features include 105 DMIPS core performance at 80 MHz, an instruction cache and prefetch module to hide Flash latency, hardware multiply/divide, and a 5-stage pipeline. The integrated Ethernet MAC, dual CAN, and USB-OTG controller make this device a connectivity-oriented silicon aimed at industrial networking, automotive gateways, and embedded web-server nodes. MPLAB Harmony framework support provides TCP/IP stacks (TCP, UDP, HTTP, SNMP), USB middleware, and graphics libraries out of the box. Typical applications include industrial Ethernet-enabled PLCs, automotive body and gateway controllers, USB device/host/OTG peripherals, CAN-based distributed control systems, and graphical HMI terminals with parallel-port TFT driving. The 121-pin TFBGA is the largest package in the family, exposing the parallel master port for external bus interfacing. When designing with this part, ensure the VCAP pin has a low-ESR 10 uF ceramic to ground for internal core regulator stability, route analog and digital grounds separately, and consult the PIC32MX5XX/6XX/7XX family datasheet for errata. The 121-TFBGA requires PCB design rules for fine-pitch BGA (0.8 mm pitch typical) including via-in-pad or dog-bone fanouts. This page synthesizes distributor pricing, TFBGA-package drop-in alternatives from the same Microchip family, and practical design notes not found on a single distributor product page.

Запрос цены Контакты

PIC32MX795F512LT-80V/PF

PIC32MX795F512LT-80V/PF - 80MHz 32-bit MCU 512KB Flash | Microchip

The Microchip PIC32MX795F512LT-80V/PF is a 32-bit MIPS32 M4K microcontroller operating at up to 80MHz with 512KB Flash and 128KB SRAM in a 100-pin TQFP (14x14) package. It integrates 10/100 Mbit Ethernet MAC, USB 2.0 OTG, two CAN modules, six UART, five I2C, and four SPI interfaces, targeting embedded connectivity applications with industrial-grade -40C to +105C operating range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals such as timers, ADCs, and communication interfaces. The PIC32 family from Microchip sits in the 32-bit MCU hierarchy: microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32MX family, and is widely used in industrial control, IoT gateways, and USB-connected embedded products where deterministic real-time performance and a broad peripheral mix are required. Key specifications include 512KB program Flash (plus 12KB auxiliary Flash), 128KB SRAM, a 5-channel DMA controller, sixteen 10-bit ADC inputs with up to 1Msps conversion, and a parallel master port for external bus expansion. The device supports 2.3V to 3.6V single-supply operation and includes a Fail-Safe Clock Monitor with multiple power management modes (Idle, Sleep, Deep Sleep) to optimize energy consumption in always-on designs. Architecturally, the PIC32MX795F512L uses the MIPS32 M4K core with single-cycle hardware multiply/divide, a 5-stage pipeline, and tightly-coupled peripherals serviced through an 8-channel DMA engine. USB 2.0 Full-Speed OTG with integrated PHY, 10/100 Ethernet MAC, and dual CAN 2.0B controllers make this part well suited for protocol-rich industrial nodes. The 100-pin TQFP exposes 85 user I/O lines with flexible remappable peripheral pins via Peripheral Pin Select (PPS). Typical applications include industrial Ethernet gateways, CAN-bus motor controllers, USB HID/CDC device controllers, building automation nodes, and graphics HMI panels using the parallel master port. The wide peripheral mix replaces multi-chip discrete designs in cost-sensitive industrial products. When designing with this part, attention must be paid to the VCAP pin: a low-ESR 10uF ceramic capacitor (per datasheet) must be placed within 0.25 inch of the pin for the internal 1.8V regulator stability. Decouple every VDD/VSS pair with 0.1uF plus bulk capacitance, and route the 80MHz crystal traces as short and symmetric as possible to avoid EMI and startup failures.

Запрос цены Контакты

PIC32MX210F016B-I/SP

PIC32MXMX210F016B-I/SP - 40MHz 32-bit MCU 16KB Flash 28-SPDIP | Microchip

The Microchip PIC32MX210F016B-I/SP is a 32-bit MIPS M4K microcontroller running at 40 MHz (66 DMIPS), integrating 16 KB of Flash, 4 KB of SRAM, and a USB 2.0 full-speed device controller in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. Active current consumption is below 0.5 mA/MHz, making it suitable for USB-connected embedded products that require both computational headroom and modest power draw. What is a PIC32MX? The PIC32MX family from Microchip Technology extends the PIC architecture to a 32-bit MIPS M4K core while preserving the legacy PIC toolchain and peripheral ecosystem. PIC32MX devices occupy the segment between 8-bit PIC16/PIC18 MCUs and the higher-performance PIC32MZ/PIC32MM lines, targeting USB, graphics, and audio bridging designs where deterministic interrupt latency and large address space matter. They function as mid-range application processors, sitting within the broader hierarchy: microcontroller -> 32-bit MCU -> MIPS M4K core -> PIC32 family. Key features include two I2S/SPI modules for codec and serial audio interfaces, Peripheral Pin Select (PPS) remapping for flexible I/O assignment, a Parallel Master Port (PMP) for graphics or external memory, a 10-bit ADC with up to 13 channels, five 16-bit timers, two comparators, and a Charge Time Measurement Unit (CTMU) that simplifies mTouch capacitive touch button and slider implementation. The on-chip USB 2.0 full-speed device transceiver (12 Mbps) eliminates the need for an external PHY and integrates dedicated DMA channels. Architecturally, the device combines a 5-stage pipelined MIPS32 M4K core with single-cycle hardware multiply, separate 16 KB instruction Flash and 4 KB data RAM, and a dedicated DMA controller with four channels. The USB SIE (Serial Interface Engine) is paired with an internal 96 MHz PLL and on-chip voltage regulator, allowing the part to operate from a single 2.3 V to 3.6 V supply. Typical applications include USB human-interface devices (HID), USB-to-UART bridges, low-cost audio docks using I2S, capacitive touch user interfaces (CTMU), small graphical displays via PMP, and consumer/industrial control nodes requiring on-board USB device connectivity. Through-hole SPDIP packaging also makes it convenient for hobbyist, education, and prototyping builds. When designing with this part, note that the SPDIP variant exposes a reduced pin subset (no USB D+/D- on some 28-pin variants; verify before PCB layout) - the 28-SPDIP does include USB functionality on dedicated pins. Decoupling requires 0.1 µF on each VDD plus bulk capacitance near the VCAP pin. This page synthesizes distributor pricing, drop-in alternatives in the same 28-SPDIP footprint, and practical design notes not consolidated on the manufacturer datasheet.

Запрос цены Контакты

PIC32MX230F064B-I/SP

PIC32MXMX230F064B-I/SP - 32-bit MCU, 64KB Flash, 40MHz, 28-SPDIP | Microchip Technology

The Microchip Technology PIC32MX230F064B-I/SP is a 32-bit RISC microcontroller from the PIC32MX1/2/5 family, featuring a MIPS32 M4K core running at up to 40 MHz with 66 DMIPS performance. It integrates 64 KB of Flash program memory and 16 KB of SRAM, all housed in a 28-pin SPDIP (Skinny Plastic Dual In-line Package) operating from a 2.3V to 3.6V supply. Typical active current consumption is below 0.5 mA/MHz, enabling low-power embedded designs. The -I industrial temperature grade supports -40C to +85C ambient operation, with on-chip temperature measurement and 1 ns high-resolution timer capture. What is a PIC32MX microcontroller? The PIC32MX is a family of 32-bit microcontrollers from Microchip based on the MIPS32 M4K architecture. It is a member of the broader microcontroller (MCU) category within microcontrollers and microprocessors, which itself falls under digital integrated circuits and semiconductors. The PIC32MX family bridges 8-bit PIC microcontrollers and 32-bit ARM Cortex-M devices, offering deterministic MIPS performance, generous on-chip memory, and rich peripherals including USB, I2S, PMP graphics interface, and Peripheral Pin Select (PPS) for flexible signal routing. Key differentiating features of the PIC32MX230F064B-I/SP include Peripheral Pin Select (PPS) for remappable digital I/O, two I2S/SPI modules for codec and serial communication, a Parallel Master Port (PMP) for graphics and external memory interfacing, mTouch capacitive touch support, and a 1 ns resolution Input Capture module for high-precision time measurement. The 28-SPDIP package is pin-through-hole, ideal for prototyping, hobbyist designs, and legacy equipment requiring a DIP footprint. Technically, the device offers five 16-bit general-purpose timers, a 10-bit ADC with up to 1 Msps conversion rate, and CIP (Core Independent Peripherals) that offload tasks from the CPU. The instruction set is a superset of the 16-bit PIC24/dsPIC instruction set, providing familiar development for legacy PIC developers while delivering 32-bit throughput. Typical applications for this MCU include low-cost 32-bit control boards, capacitive touch user interfaces, audio playback with I2S codecs, USB device peripherals, and prototyping on breadboards where the DIP package simplifies rework. It is also well suited for industrial sensor aggregation and small graphics interfaces using the PMP. When designing with the PIC32MX230F064B-I/SP, ensure your programmer/debugger (such as MPLAB PICkit 4 or ICD 4) supports the PGECx/PGEDx ICSP pins on the 28-SPDIP. For high-frequency or noise-sensitive analog designs, route VDD/VSS pairs with decoupling close to the pins and consider the brown-out reset thresholds for battery-powered designs. This page synthesizes distributor pricing, drop-in PIC32MX family alternatives, and design notes not found in the manufacturer datasheet alone, helping engineers shorten selection time and avoid common prototype pitfalls.

Запрос цены Контакты

PIC32MX775F512LT-80V/PT

PIC32MXMX775F512LT-80V/PT - 80MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX775F512LT-80V/PT is a 32-bit MIPS M4K microcontroller running at 80MHz, featuring 512KB Flash and 64KB RAM, housed in a 100-pin TQFP (12x12 mm) package. It integrates 10-bit ADC, USB-OTG, dual CAN, Ethernet MAC, six UART, five I2C, and four SPI interfaces, making it suitable for connected embedded designs. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (RAM), and programmable I/O peripherals. The PIC32MX family uses the industry-standard MIPS M4K core, placing it in the broader 32-bit MCU taxonomy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32MX series. Compared to 8/16-bit MCUs, the 32-bit architecture enables higher computational throughput, larger address space, and richer peripheral integration for connected and multimedia applications. Key features include 512KB Flash (256K x 8 instructions), 64KB SRAM, 80MHz core clock, 1.56 DMIPS/MHz performance, 10/100 Ethernet MAC, USB 2.0 Full-Speed OTG, two CAN 2.0B controllers, six UART modules, five I2C and four SPI ports, 16-channel 10-bit ADC, and up to 85 GPIO pins depending on package variant. The 100-pin TQFP package provides a generous pin count for multimedia and connectivity designs. The architecture combines the MIPS M4K core with Microchip's peripheral library and MPLAB Harmony framework, enabling code reuse across PIC32 families. Hardware cryptographic accelerators, DMA, and a parallel master port extend capability for industrial and consumer applications requiring deterministic real-time response. Typical applications include industrial automation controllers, Ethernet-enabled sensor hubs, automotive body controllers, USB peripherals, and embedded HMI/gateway products. The dual CAN interfaces make it particularly suitable for vehicle network bridge nodes, while Ethernet MAC enables networked factory equipment. When designing with this device, ensure the MCLR reset circuit and decoupling capacitors match reference schematics; insufficient decoupling can cause instability at 80MHz. The 'V' suffix indicates the -40C to +105C industrial temperature grade, suitable for harsh environments. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with actionable procurement and substitution guidance for the PIC32MX775F512LT-80V/PT.

Запрос цены Контакты

PIC32MZ0512EFE064-E/MR

PIC32MZ0512EFE064-E/MR - 32-bit 180MHz MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE064-E/MR is a 32-bit MIPS32 M-Class PIC32MZ microcontroller running at up to 180 MHz, featuring 512 KB of Flash and 128 KB of SRAM, housed in a 64-pin QFN (9x9) package. As part of the PIC32MZ EF family, it integrates an FPU, HS USB, Ethernet MAC, CAN, SQI, and advanced analog peripherals targeting connectivity-rich industrial, automotive (AEC-Q100), IoT, graphics HMI, and motor-control applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich peripheral set. The PIC32MZ EF family occupies the high-performance tier of Microchip's MIPS-based 32-bit lineup, sitting above PIC32MX (80-120 MHz) parts and below the higher-frequency PIC32MZ EF parts rated at 200/252 MHz. Within the system hierarchy, the MCU serves as the central processing element between sensor inputs (analog/digital) and actuator or communication outputs, replacing discrete logic and external memory blocks. Key features of the PIC32MZ0512EFE064-E/MR include a 200 MHz capable MIPS32 M-Class core (de-rated to 180 MHz for the 'E' automotive grade), 512 KB Flash with live-update support, 128 KB SRAM, hardware FPU for IEEE-754 single-precision math, integrated 10/100 Ethernet MAC with RMII/MII interface, USB 2.0 High-Speed (480 Mbps) OTG with on-chip transceiver, dual CAN 2.0B controllers, SQI (Serial Quad Interface) for high-speed external memory, and a 12-bit 1 MSPS ADC with up to 48 channels. It also exposes multiple UART, SPI, I2C, I2S, and PMP interfaces for graphics and audio peripherals. Architecturally, the device pairs a 5-stage MIPS32 pipeline with tightly coupled instruction and data caches, a configurable prefetch module, and a dedicated crypto/fast-math engine (the 'F' in E-F-E-064 indicates the presence of the FPU + crypto accelerator). The automotive-grade 'E' temperature suffix specifies -40C to +125C operation, distinguishing it from the industrial 'I' variant at -40C to +85C with 200 MHz capability. Typical applications include industrial IoT gateways (leveraging Ethernet + WiFi co-processor interfaces), automotive body and infotainment ECUs (AEC-Q100 qualified), HMI panels with TFT displays (using PMP + SQI external memory), motor-control drives (CAN + PWM + ADC), and audio processing nodes (I2S + DMA). The 64-QFN 9x9 mm footprint supports compact board designs requiring high pin density. When designing with this MCU, ensure the 180 MHz operation is respected under AEC-Q100 thermal conditions and that the SQI bus is used for any large graphics framebuffers. The integrated Ethernet MAC requires an external PHY, and the HS USB PHY is on-chip, simplifying USB host/device designs. This page synthesizes distributor pricing, verified drop-in alternatives within the same 64-QFN footprint, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFE064-E/PT

PIC32MZ0512EFE064-E/PT - 32-bit 200MHz MCU 512KB Flash | Microchip

The Microchip PIC32MZ0512EFE064-E/PT is a high-performance 32-bit microcontroller from the PIC32MZ EF family, built around the MIPS32 M-Class Warrior core with integrated floating-point unit (FPU). It operates at up to 200 MHz delivering 330 DMIPS, integrates 512 KB of Flash and 128 KB of SRAM (Mouser listing), and is housed in a 64-pin TQFP package (10x10 mm). The device is qualified to the automotive AEC-Q100 standard with an extended operating temperature range of -40C to +125C, making it suitable for harsh-environment embedded designs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADC, timers, communication interfaces) into one package. Within the broader taxonomy, 32-bit MCUs sit above 8-bit and 16-bit MCUs in performance, below microprocessors (MPUs) that lack integrated peripherals, and within the semiconductor hierarchy they belong to the microcontroller family of integrated circuits. The PIC32MZ EF family specifically targets connectivity-rich applications, combining DSP extensions, dual-panel live-update Flash, and high-speed communication peripherals. Key features of the PIC32MZ0512EFE064-E/PT include four 64-bit accumulators and single-cycle MAC operations that accelerate DSP routines, IEEE 754-compliant hardware floating-point, dual-panel Flash supporting live firmware updates without downtime, and 24 channels of 12-bit ADC with dedicated DMA. Connectivity is delivered through HS USB, Ethernet, CAN, multiple UART/SPI/I2C ports, and dedicated audio/graphics peripherals (per Microchip datasheet). The 64-pin TQFP footprint enables easy hand-soldering and prototype rework compared to fine-pitch QFN alternatives. Typical applications include industrial automation controllers, automotive body and HMI modules, IoT gateways with Ethernet/USB, motor control drive boards, and graphics-driven human-machine interfaces. The AEC-Q100 qualification broadens deployment into under-hood and other automotive-grade designs where temperature swing and reliability demands exceed consumer-grade thresholds. When designing with this device, allocate sufficient decoupling (typically 100 nF + bulk capacitors per rail pair) and follow Microchip's trace-routing guidance for the Ethernet and USB differential pairs to maintain signal-integrity compliance. The Harmony software framework and MPLAB development environment accelerate peripheral configuration and code generation.

Запрос цены Контакты

PIC32MZ0512EFE064T-I/MR

PIC32MZ0512EFE064T-I/MR - 200MHz 32-bit MCU, 512KB Flash | Microchip

The Microchip PIC32MZ0512EFE064T-I/MR is a high-performance 32-bit MIPS microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, packaged in a 64-pin QFN (9x9 mm) and supplied on tape and reel. It features a 200 MHz MIPS Warrior M-class core delivering up to 330 DMIPS, an integrated IEEE 754 floating-point unit (FPU), and four 64-bit accumulators with single-cycle MAC, saturating, and fractional math support. The device integrates 512 KB of Flash with dual-panel Live-Update support plus 128 KB of SRAM, plus high-speed connectivity peripherals including USB 2.0 High-Speed, 10/100 Ethernet MAC, and multiple UART/SPI/I2C channels for networked embedded designs. A 32-bit MCU is a microprocessor whose internal data paths, registers, and arithmetic units are 32 bits wide, allowing single-instruction processing of larger data words than 8-bit or 16-bit controllers. Within the broader taxonomy of microcontrollers, this device sits under the sub-class of Cortex-M/MIPS M-class application processors, which target high-performance connected embedded applications rather than ultra-low-power sensing nodes. The PIC32MZ EF family is engineered for industrial, automotive, IoT, graphics/HMI, and motor control segments where DSP-class arithmetic, large code footprint, and rich wired connectivity are required simultaneously. The PIC32MZ0512EFE064T-I/MR combines a 12-bit 18 Msps ADC, a graphics controller for TFT displays, audio interfaces (I2S/AC97), multiple general-purpose 32-bit timers, an 8-channel hardware crypto engine (not present in this 'EFE' variant), and an interrupt controller with five priority levels. The floating-point unit accelerates single- and double-precision math, dramatically speeding signal processing routines, FFTs, and control loops versus integer-only cores. The part is rated for an industrial -40C to +85C temperature range and is qualified for demanding environments including factory automation and automotive body/chassis applications. Typical applications include industrial IoT gateways with on-board Ethernet, HMI panels with TFT-LCD graphics, motor control (BLDC and PMSM), audio processing peripherals with USB streaming, and connected sensors requiring high-speed connectivity. The Live-Update dual-panel Flash enables in-field firmware upgrades without downtime, a critical feature for deployed industrial assets. When designing with this device, allocate adequate PCB copper area under the exposed pad of the QFN package for thermal dissipation and ground return, route the 50 MHz Ethernet reference clock with controlled impedance, and provide bulk decoupling on every supply rail as recommended in the device datasheet's power-supply section. This page synthesizes distributor pricing, drop-in Microchip alternatives, application guidance, and design notes not found in the manufacturer datasheet, helping procurement and design engineers make informed decisions.

Запрос цены Контакты

PIC32MZ0512EFE100-E/GJX

PIC32MZ0512EFE100-E/GJX - 200MHz 512KB Flash MCU TFBGA-100 | Microchip

The Microchip PIC32MZ0512EFE100-E/GJX is a high-performance 32-bit microcontroller from the PIC32MZ EF family, running up to 200 MHz with 330 DMIPS performance and 512 KB of Flash memory plus 128 KB of SRAM. Housed in a 100-ball Thin Fine-Pitch Ball Grid Array (TFBGA) measuring 7x7 mm, this MCU is built around the MIPS32 M-Class Warrior core with an integrated IEEE 754-compliant single-precision Floating Point Unit (FPU), DSP-enhanced instructions, four 64-bit accumulators, single-cycle MAC, and saturating/fractional math support. The "-E" suffix indicates an extended operating temperature range of -40C to +125C, suiting industrial and automotive-grade embedded designs. A 32-bit microcontroller (MCU) is an embedded processor that integrates a CPU core, memory (Flash/RAM), and a rich set of peripherals on a single die. The PIC32MZ EF family specifically targets connectivity-intensive applications, integrating High-Speed USB, 10/100 Ethernet MAC, CAN (where configured), multiple UART/SPI/I2C interfaces, 12-bit ADC, analog comparators, and graphics/audio peripherals. As a hypernym hierarchy, PIC32MZ EF sits under: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. These MCUs are typically deployed in industrial HMI, motor control, IoT gateways, and automotive infotainment subsystems. Key features include dual-panel Flash for live firmware updates without downtime, a 200 MHz core with hardware multiply/divide and DSP extensions, a Crypto engine (Note: this -E variant ships with No Crypto, per the family variant table), up to 16-channel 12-bit ADC at 1 Msps, and a wide peripheral mix designed for graphics TFT driving and audio processing. The FPU offloads floating-point operations, enabling faster sensor fusion and DSP workloads. The integrated Ethernet MAC and HS-USB PHY interface streamline connected-product designs by reducing external component count and BOM cost. Architecturally, the device pairs a high-throughput 200 MHz core with multi-channel DMA, dedicated motor-control PWM, and a peripheral bus matrix that minimizes contention. The 100-ball TFBGA package is the smallest footprint option in the family, freeing board area for radios, sensors, or display drivers. The FPU accelerates control loops in motor drive and power-conversion applications, while the dual-panel Flash eliminates application downtime during firmware upgrades - a critical feature for industrial IoT nodes requiring continuous operation. Typical applications include industrial HMI panels, IoT edge gateways with Ethernet, BLDC and PMSM motor drives, automotive body and infotainment subsystems, medical patient monitoring, and connected consumer graphics products. The 7x7 mm TFBGA package is preferred when PCB real estate is at a premium and the design tolerates BGA assembly. When designing with this part, plan BGA fanout and via-in-pad PCB fabrication carefully. The -E temperature grade enables under-hood automotive and outdoor industrial use, but thermal derating still applies; ensure junction temperature stays within the 125C maximum with proper PCB copper spreading. Program/debug via the standard 4-wire ICSP interface using any PGECx/PGEDx pin pair, and leverage MPLAB Harmony 3 for peripheral drivers and middleware. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design considerations not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ0512EFE100-E/PT

PIC32MZ0512EFE100-E/PT - 32-bit 180MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE100-E/PT is a high-performance 32-bit MIPS M-Class microcontroller running at 180 MHz with 512 KB Flash and 128 KB SRAM, housed in a 100-pin TQFP (PT) package measuring 12x12 mm. It is the extended-temperature ("-E") variant of the PIC32MZ EF family, designed for industrial and automotive-grade connectivity applications, and is supplied in tray packaging. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program and data memory, and a rich set of peripherals on one silicon die. The PIC32 architecture belongs to the wider taxonomy of microcontrollers -> microprocessors -> semiconductors -> integrated circuits. The PIC32MZ EF family specifically combines a MIPS Warrior M-class CPU with a hardware floating-point unit (FPU), enabling single-cycle MAC, dual-panel Flash for live update support, and DSP-enhanced arithmetic with IEEE 754 compliance. Key features include 200 MHz/330 DMIPS core performance, 512 KB Flash with 160 KB dedicated boot Flash, 128 KB SRAM, a 12-bit ADC with up to 40 analog channels, 9 USB, Hi-Speed USB, Ethernet MAC, SQI (Serial Quad Interface), and dedicated DMA channels. The extended-temperature grade (-40C to +125C) makes it suitable for harsh industrial and automotive environments, while the integrated crypto engine, RNG, and FPU accelerate connected and graphics applications. Architecturally, the PIC32MZ EF uses a superscalar pipeline with dual-issue capability, branch prediction, and tightly-coupled peripherals routed through multiple DMA channels. Dual-panel Flash allows safe firmware live updates in the field. The high pin count (100) exposes rich connectivity including HS-USB, Ethernet, CAN, SQI for external QSPI Flash, and 12-bit ADC, enabling single-MCU designs for HMI, motor control, and IoT gateways. Typical applications include industrial IoT gateways, automotive HMI, motor control inverters, graphics displays, audio processing, and connected embedded systems. The wide peripheral mix makes it ideal as a host MCU for Ethernet-connected sensors and as a gateway between industrial fieldbuses and cloud services. When designing with this part, plan trace impedance for the HS-USB and Ethernet differential pairs, decouple VDD/VUSB per datasheet reference designs, and select boot Flash strategy (live update vs single panel) early, as this affects linker scripts and application architecture. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFE100-I/GJX

PIC32MZ0512EFE100-I/GJX - 200MHz 32-bit FPU MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE100-I/GJX is a 32-bit microcontroller from the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, integrating a MIPS Warrior M-class core running at 200 MHz (330 DMIPS), 512 KB of Flash with dual-panel live-update support, and 128 KB of SRAM in a 100-pin TFBGA (7x7x1.06 mm) package. The industrial-grade -I variant operates across -40 °C to +85 °C and supports a 2.0 V to 3.6 V supply range, making it suitable for industrial, IoT, and graphics/HMI applications. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a processor core, program and data memory, and a rich set of on-chip peripherals. PIC32MZ EF devices occupy the high-performance tier of Microchip's PIC32 portfolio and add a single-precision IEEE-754 FPU and a DSP-enhanced core with four 64-bit accumulators plus single-cycle MAC, saturating and fractional math, supporting signal-processing workloads that benefit from hardware-accelerated arithmetic. The PIC32MZ family sits in the broader taxonomy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 -> PIC32MZ EF. Key features include a 200 MHz / 330 DMIPS MIPS Warrior M-class core, IEEE 754-compliant FPU, dual-panel Flash for live firmware update, an integrated crypto engine on F-variant devices (this E variant has No Crypto), and a connectivity peripheral set that includes HS USB, Ethernet MAC, CAN, and multiple I2S/SPI/I2C interfaces for audio and graphics pipelines. On-board 12-bit ADC at up to 18 Msps and analog comparators provide advanced analog capability, while the Graphics Peripheral Interface enables direct connection to TFT displays for HMI applications. The architecture combines a 5-stage pipeline with tightly-coupled SRAM, instruction and data caches, and a dedicated bus matrix so the CPU can sustain 330 DMIPS while peripherals stream data through DMA. Dual-panel Flash allows one bank to run while the other is reprogrammed, enabling fail-safe firmware-over-the-air (FOTA) updates without downtime - a critical capability for connected industrial nodes. Typical applications include industrial IoT gateways with Ethernet, HMI panels with TFT display driving, automotive infotainment sub-systems (non-safety-rated), high-end audio devices, motor control, and graphics-rich consumer appliances. The 100-pin TFBGA footprint suits compact board layouts where space is at a premium. When designing with this device, use the MPLAB Harmony v3 framework for peripheral configuration and middleware, and confirm that the chosen 100-pin TFBGA layout has adequate thermal copper for sustained CPU activity. Provide a clean, low-noise 3.3 V rail; the FPU and DSP engine are sensitive to supply ripple at high clock rates. This page synthesizes distributor pricing, same-brand drop-in alternatives (different Flash / temperature grade), and practical design notes that are not assembled in the manufacturer datasheet itself.

Запрос цены Контакты

PIC32MZ0512EFE100-I/PF

PIC32MZ0512EFE100-I/PF - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE100-I/PF is a 32-bit MIPS Warrior M-class microcontroller running at 200 MHz (330 DMIPS) with 512 KB dual-panel Flash and 128 KB SRAM in a 100-pin TQFP (14x14 mm) package. It integrates an IEEE 754-compliant single-precision FPU, four 64-bit accumulators, single-cycle MAC, saturating and fractional math, Hi-Speed USB 2.0 device/host/OTG, 10/100 Ethernet MAC with RMII/MII, Quad-SPI (SQI) interface, and advanced analog including a 12-bit 2 MSPS ADC. The -I/PF suffix denotes the industrial-temperature (-40C to +85C) variant with PF = 100-pin TQFP. What is a PIC32 microcontroller? A PIC32 microcontroller is a 32-bit MIPS-based MCU family that delivers substantially higher performance than 8- and 16-bit MCUs while preserving Microchip's PIC ecosystem: peripheral compatibility, MPLAB X IDE, Harmony framework, and pin/peripheral compatibility across families. Within the MCU taxonomy, PIC32 sits under microcontroller -> embedded processor -> semiconductor. The PIC32MZ EF sub-family adds hardware floating-point and dedicated DSP extensions, occupying the high-performance tier of the PIC32 line. Key features include 200 MHz / 330 DMIPS core, 512 KB dual-panel Flash for live firmware updates without downtime, 128 KB SRAM, Hi-Speed USB 2.0 with on-chip transceiver, 10/100 Ethernet MAC, dedicated SQI for external serial flash, four UART, multiple SPI/I2C peripherals, and configurable I/O. The 100-pin TQFP footprint exposes extensive connectivity while keeping PCB design straightforward. The architecture uses a 5-stage pipeline MIPS Warrior M-class core with DSP extensions and an integrated single-precision IEEE 754 FPU. Dual-panel Flash allows the active firmware panel to update the inactive panel while execution continues, eliminating downtime during firmware upgrades - critical for industrial and IoT gateways. Typical applications include industrial IoT gateways with Ethernet, motor-control BLDC/PMSM drives, HMI/graphical displays, audio/graphics interfaces, USB device/host peripherals, and automotive connectivity clusters. The wide peripheral set makes it suitable as a system-on-MCU for connected embedded products. Design consideration: route the Ethernet RMII/MII traces with 50-ohm impedance, place the 25 MHz PHY clock within 5 mm of the ETH_REF_CLK pin, and keep USB DP/DM traces length-matched within 150 mil to preserve Hi-Speed USB signal integrity. This page synthesizes distributor pricing, drop-in PIC32MZ EF alternatives, and practical thermal/EMC design notes not collected into the manufacturer datasheet, giving the buyer a procurement and design reference unavailable from any single source.

Запрос цены Контакты

PIC32MZ0512EFE100-I/PT

PIC32MZ0512EFE100-I/PT - 200MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MZ0512EFE100-I/PT is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family running at up to 200 MHz with 330 DMIPS core performance, 512 KB Flash and 128 KB SRAM, housed in a 100-pin TQFP (12x12 mm) package. It integrates a MIPS Warrior M-class core with IEEE 754-compliant FPU for 32/64-bit floating-point math, microMIPS mode for up to 35% smaller code size, and a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, saturating and fractional math. The device also exposes 16 KB I-cache and 4 KB D-cache, an MMU for embedded OS execution, and dual-panel Flash with live-update support. Background: A microcontroller (MCU) is a single-chip computer integrating a CPU core, memory (Flash/RAM), and peripherals. 32-bit MCUs based on ARM Cortex-M or MIPS architectures target mid-to-high-end embedded applications requiring more performance and memory than 8/16-bit parts. The PIC32MZ EF family sits in the high-performance tier, competing with Cortex-M4/M7 parts and adding an integrated FPU plus connectivity peripherals. Connectivity-focused MCUs like this one bridge the gap between traditional microcontrollers and microprocessors, supporting industrial Ethernet, USB, and graphics HMI workloads on a single die. Key features include a 12-bit 18 Msps ADC, multiple communication interfaces (HS USB, Ethernet, CAN, SPI, I2C, UART), and hardware crypto acceleration on the EFF variant (EFE = no crypto). It supports up to 2 MB of live-update Flash in the broader family and integrates audio/graphics interfaces for HMI applications. The Industrial (-I) operating range covers -40 °C to +85 °C, suitable for industrial and consumer environments. Architecture-wise, the MIPS Warrior M-class core delivers deterministic interrupt latency and tight C/Assembly code density when microMIPS mode is enabled. The dual-panel Flash partition enables in-field firmware updates without downtime, while the MMU permits running embedded operating systems such as FreeRTOS, OpenRTOS, or even Linux derivatives. Typical applications include industrial automation controllers, IoT gateways with Ethernet, automotive HMI, motor control (BLDC/PMSM), and graphics-based human-machine interfaces. The combination of HS USB, Ethernet MAC, and CAN makes it suitable for industrial connectivity nodes. Design consideration: at 200 MHz core clock, place a 1 µF + 100 nF decoupling pair within 2 mm of each VDD/VSS pair on the TQFP and route VSS traces directly to a continuous ground pour to control switching noise on the PLL supply. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFE100T-E/GJX

PIC32MZ0512EFE100T-E/GJX - 200MHz 32-bit MCU 512KB Flash TFBGA-100

The Microchip Technology PIC32MZ0512EFE100T-E/GJX is a 32-bit MIPS32 M-Class PIC microcontroller operating at up to 200 MHz, integrating 512 KB of Flash program memory and 128 KB of SRAM in a 100-pin TFBGA (7x7 mm) package. It is part of the PIC32MZ EF family aimed at connectivity, industrial, automotive, IoT, graphics (HMI) and motor-control applications. What is a PIC32 MCU? The PIC32MZ EF family belongs to the broader class of 32-bit microcontrollers (MCUs), which are programmable system-on-chip devices containing a processor core, Flash program memory, SRAM, and rich peripherals. Within that hierarchy, the PIC32MZ EF family sits as a high-performance MIPS32 M-Class variant of Microchip's PIC product line, targeting applications that demand up to 2 MB Flash, 512 KB SRAM, and up to 252 MHz core speed, while remaining compatible with the Microchip MPLAB X IDE and Harmony ecosystem. Key features of the PIC32MZ0512EFE100T-E/GJX include 78 user I/O pins, an integrated 200 MHz core with single-cycle MAC DSP engine, a 12-bit ADC, multiple UART/SPI/I2C/CAN peripherals (no crypto, no CAN per the base variant descriptor), and a 100-pin TFBGA package with 0.65 mm ball pitch that supports compact, high-density PCB designs. The part carries automotive-grade screening (the E temperature grade suffix means -40C to +125C operating range), making it suitable for AEC-Q100 customer programs. Architecturally, the PIC32MZ EF core combines a 5-stage MIPS32 pipeline with tightly-coupled prefetch buffers and a dedicated FPU option, which together with the 128 KB SRAM delivers deterministic interrupt latency and high throughput for graphics and motor-control loops. The part targets industrial HMI, connected appliances, and automotive body-domain nodes where MIPS-per-watt and a compact BGA footprint are critical. Typical applications include industrial HMI displays, IoT edge gateways, automotive infotainment sub-systems, motor-control inverters, and graphics-enabled consumer devices. The TFBGA-100 7x7 package suits space-constrained designs that still require 78 GPIOs and a rich peripheral mix. When designing with this part, ensure that the PCB land pattern matches the 0.65 mm pitch BGA and that the thermal pad is properly soldered for thermal dissipation. The E temperature grade suffix supports automotive under-hood and industrial environments without derating. This page consolidates distributor pricing, drop-in alternatives, and design notes from Microchip documentation not summarized on a typical catalog page.

Запрос цены Контакты

PIC32MZ0512EFE100T-I/GJX

PIC32MZ0512EFE100T-I/GJX - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE100T-I/GJX is a high-performance MIPS32 M-Class 32-bit microcontroller running at 200 MHz, integrating 512 KB of Flash and 128 KB of SRAM in a 100-lead TFBGA (7x7 mm, 0.65 mm pitch) package. It belongs to the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, which targets connectivity-rich applications in industrial, automotive, IoT, graphics/HMI, and motor-control segments. The 200 MHz MIPS Warrior M-class core delivers up to 330 DMIPS and includes an IEEE 754-compliant FPU plus a DSP-enhanced engine with four 64-bit accumulators, single-cycle MAC, and saturating/fractional math. The 'T' suffix denotes Tape-and-Reel packaging, the 'I' denotes the -40C to +85C industrial temperature grade, and the 'GJX' suffix identifies the 100-pin TFBGA package. A 32-bit microcontroller (MCU) is an integrated circuit combining a high-performance processor core, Flash program memory, SRAM data memory, and a rich set of on-chip peripherals (USB, Ethernet, ADC, PWM, timers, communication interfaces) into a single chip. The PIC32MZ EF family sits at the top of Microchip's MIPS-based 32-bit MCU portfolio and bridges into the broader category of embedded microcontrollers within the semiconductor taxonomy: 32-bit MCU -> microcontroller -> embedded processor -> integrated circuit. Devices in this class typically replace separate microprocessor-plus-support-chip designs, lowering BOM cost and PCB area while providing deterministic real-time response. Key features of this variant include a hardware floating-point unit, dual-panel Flash for live update support, advanced analog with high-speed ADC, Hi-Speed USB, 10/100 Ethernet MAC, audio and graphics interfaces, and an integrated crypto engine on related family members (this specific variant is the no-Crypto, no-CAN member of the family). The 100-lead TFBGA package exposes the full peripheral set while keeping board footprint compact at approximately 49 mm squared. Typical applications include industrial automation controllers, IoT edge nodes with Ethernet connectivity, graphical HMI panels, audio processing products, motor-control inverter boards, and automotive body/comfort modules where the wide temperature range and connectivity peripherals fit naturally. The PIC32MZ EF family's combination of FPU + DSP extensions and high peripheral integration makes it well-suited to closed-loop control, networked sensors, and graphical user-interface designs. When designing with this device, ensure that the chosen TFBGA land pattern is fabricated precisely to JEDEC MS-026 tolerances to avoid solder-joint reliability issues and that all decoupling follows Microchip's recommended capacitor network. Plan for an external PHY when using the integrated Ethernet MAC and verify the chosen PHY reference design supports your required RMII/RGMII timing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFE100T-I/PT

PIC32MZ0512EFE100T-I/PT - 200MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MZ0512EFE100T-I/PT is a 32-bit MIPS32 M-Class PIC microcontroller running up to 200 MHz with 330 DMIPS, 512 KB of Flash program memory and 128 KB of SRAM, housed in a 100-pin TQFP package (12x12 mm). It is part of the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family targeting industrial, IoT, graphics/HMI and motor-control applications, with no on-board hardware cryptography engine. A 32-bit MCU is a microcontroller whose data path, registers and arithmetic logic unit operate on 32 bits per instruction. Within the broader taxonomy, the PIC32MZ EF belongs to the MCU -> microcontroller -> embedded processor -> semiconductor hierarchy, and combines an applications-class CPU core with rich connectivity peripherals (USB-HS, Ethernet, CAN, SQI). The 'T-I/PT' suffix indicates tape-and-reel packaging, -40C to +85C industrial temperature grade and a TQFP-100 pinout. Key features include an IEEE 754-compliant hardware FPU for single- and double-precision math, a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, dual-panel Flash for live firmware update, 200 MHz operation yielding 330 DMIPS, and a broad peripheral set including USB 2.0 High-Speed, 10/100 Ethernet MAC, CAN, SQI, multiple I2C/SPI/UART and a 12-bit ADC with up to 42 analog inputs. The device supports 5V tolerant I/O on selected pins. Architecturally the part integrates a MIPS Warrior M-class core with tightly coupled FPU and DSP extensions, accelerating signal-processing and floating-point workloads while leaving headroom for an RTOS. The dual-panel Flash enables live-update firmware schemes, eliminating down-time during field upgrades. 128 KB SRAM supports packet buffering for Ethernet/USB stacks and large graphics frame buffers. Typical applications include industrial HMI panels with TFT LCD and touch, motor-control FOC drives, industrial IoT gateways with Ethernet/USB, automotive body and connectivity modules, and graphics-rich consumer devices. Pricing references below reflect distributor data as of 2026-10-04. When designing with this MCU, allocate decoupling per the datasheet and follow Microchip's trace-length guidance for USB-HS and Ethernet to pass compliance. Plan dual-panel firmware images in flash to leverage live update. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFE124-E/TL

PIC32MZ0512EFE124-E/TL - 32-bit MCU 200MHz 512KB Flash 124-VTLA | Microchip

The Microchip Technology PIC32MZ0512EFE124-E/TL is a 32-bit MIPS32® M-Class PIC® 32MZ microcontroller with FPU, 512KB Flash, 128KB RAM, and a maximum CPU speed of 200 MHz, packaged in a 124-pin VTLA (9x9 mm) thermally-enhanced laminate package. It integrates a high-performance MIPS Warrior M-class core with IEEE 754-compliant single-precision Floating Point Unit, DSP-enhanced four 64-bit accumulators with single-cycle MAC and saturating/fractional math, plus Dual Panel Flash for live-update support targeting IEC 60730 Class B firmware safety. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals (timers, ADC/DAC, communication controllers) into a single device. The PIC32MZ EF family sits at the top of the PIC32 hierarchy and is engineered for high-performance embedded applications requiring both connectivity and rich analog/mixed-signal integration. Key features include a 200 MHz / 330 DMIPS core with 252 MHz headroom in the family, 512 KB Flash with Dual Panel Live Update, 128 KB SRAM, Hi-Speed USB 2.0 (480 Mbps) with on-chip PHY, 10/100 Ethernet MAC with IEEE 1588 PTP support, Serial Quad Interface (SQI) for external flash, up to 97 I/O lines, multiple 12-bit ADC and DAC channels, DMA controllers, and PWM peripherals suited for motor control. The VTLA-124 (9x9 mm) laminate package exposes a large die-attach pad for low thermal resistance in space-constrained designs. Architecturally, the device combines a 5-stage MIPS pipeline with tightly-coupled SRAM, hardware multiply-accumulate DSP extensions, and dedicated peripherals (USB, ENET, SQI, CAN, I2S) that offload the CPU. This balanced compute-and-connectivity integration eliminates the need for an external PHY or bus-marshalling CPLD in many designs. Typical applications include industrial automation, automotive connectivity gateways, IoT edge nodes, HMI/graphics terminals, audio processing with I2S/USB streaming, and motor control. The wide peripheral mix supports HMI + connectivity + analog sensing on a single chip. Designers should verify the Live Update dual-panel firmware sequence in MPLAB Harmony before field deployment and budget sufficient PCB copper under the exposed pad to honor thermal limits at high MIPS loads. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ0512EFE124-I/TL

PIC32MZ0512EFE124-I/TL - 32-bit MCU, 200MHz, 512KB Flash, USB-HS, Ethernet | Microchip

The Microchip PIC32MZ0512EFE124-I/TL is a high-performance 32-bit microcontroller from the PIC32MZ EF (Embedded Connectivity with FPU) family, featuring a MIPS32 M-Class Warrior core running up to 200 MHz with 330 DMIPS throughput, 512 KB of dual-panel Flash memory for live-update support, and 128 KB of SRAM, all integrated in a 124-pin VTLA (9x9 mm) package with exposed thermal pad. A 32-bit microcontroller (MCU) is an integrated circuit containing a 32-bit processor core, program memory, data memory, and a rich set of peripherals such as timers, communication interfaces, and analog blocks. PIC32 microcontrollers sit within the broader hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The EF family extends the PIC32MZ line with a hardware FPU, DSP-enhanced MAC engine, and connectivity peripherals (HS USB, Ethernet MAC, SQI), making these parts suitable for industrial, IoT, graphics/HMI, and motor-control applications. Key features include IEEE 754-compliant single/double-precision FPU, four 64-bit accumulators with single-cycle MAC and saturating fractional math, dual-panel Flash supporting live-update firmware field upgrades, 12-bit 18 MSPS ADC with up to 48 channels, and a comprehensive connectivity suite: HS USB 2.0 OTG, 10/100 Ethernet MAC with MII/RMII, SQI (Serial Quad Interface) for high-speed external Flash, six UART, four SPI, five I2C, PMP, and EBI/EMI for external memory expansion. The 124-pin VTLA package exposes an extensive GPIO count for parallel bus and multiplexed peripheral use. Architecturally, the PIC32MZ EF combines the MIPS Warrior M-class pipeline with a 2 KB instruction cache and a tightly-coupled FPU, delivering deterministic interrupt latency at 200 MHz while retaining low-power sleep modes for battery-aware IoT nodes. The 200 MHz rating (the EF family headline is 252 MHz for select parts) is combined with up to 32 KB of SRAM used as cache, allowing zero-wait-state execution from Flash under typical workloads. Typical applications include industrial Ethernet-connected controllers, USB host/device embedded peripherals, IoT gateways with TLS offload, graphics HMI panels with resistive touch, BLDC/PMSM motor control loops, and audio processing chains leveraging the DSP MAC instructions. The part is also widely used in medical instrumentation and aerospace-grade auxiliary controllers. Design considerations center on the 124-VTLA package: a 9x9 mm thermally enhanced laminate substrate that requires careful fanout and at least four PCB layers for signal integrity on parallel buses. Always place at least one 100 nF decoupling cap per VDD pin pair and a bulk 4.7 uF ceramic near the regulator output. This page synthesizes verified distributor pricing, same-package drop-in alternatives from the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ0512EFE124T-I/TL

PIC32MZ0512EFE124T-I/TL - 200MHz 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ0512EFE124T-I/TL is a high-performance 32-bit MIPS32 M-Class PIC microcontroller rendered as a high-performance 32-bit MIPS32 M-Class PIC microcontroller offering 200 MHz CPU speed, 512 KB Flash and 128 KB SRAM, and a rich connectivity peripheral set in a 124-pin VTLA (9x9) package with exposed pad. The PIC32 family of microcontrollers is Microchip's high-performance MIPS-based line that bridges 8/16-bit PIC MCU simplicity with 32-bit application-processor class performance. PIC32MZ EF devices specifically target connectivity-rich applications with on-chip USB 2.0 High-Speed, 10/100 Ethernet MAC, SQI (Serial Quad Interface) for high-throughput memory expansion, and a complete set of serial interfaces. They are widely used in industrial, IoT, HMI graphics, motor control and automotive-adjacent segments. Key specifications for PIC32MZ0512EFE124T-I/TL include 200 MHz core clock, 512 KB Flash program memory organized as 512K x 8, 128 KB SRAM, 124-pin VTLA (9x9 mm) package with exposed thermal pad, USB-HS, Ethernet MAC, SQI, multiple UART/SPI/I2C, and 12-bit ADC. The "I" in -I/TL denotes the -40C to +85C industrial temperature grade and "TL" identifies the VTLA tape-and-reel packaging suffix. This part is fabricated in CMOS process technology with on-chip FPU support and tightly-coupled peripherals. Compared to PIC32MX predecessors, the EF family adds significantly higher throughput, larger SRAM, dedicated crypto-less variants (the "EF" suffix means no on-chip crypto) and pin-compatible scalability across 64/100/124-pin options, enabling designers to migrate up or down without board re-layout. Typical applications include industrial control and HMI panels, USB device and host peripherals, Ethernet-connected IoT gateways, graphical display controllers with external SQI flash, motor control FOC platforms, and medical instrumentation front-ends. The 124-pin package also exposes enough I/O for parallel-camera or TFT-LCD drive. Designers should plan decoupling around the 124-pin VTLA's exposed thermal pad and route the high-speed USB and Ethernet differential signals as 90-ohm differential pairs with controlled impedance. Always confirm the migration path against the PIC32MZ EF datasheet family specification, since pin alternate-function maps differ across 64/100/124 variants. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MZ EF family, and practical design notes that complement the Microchip datasheet.

Запрос цены Контакты

PIC32MZ0512EFE144-E/JWX

PIC32MZ0512EFE144-E/JWX - 32-bit 180MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE144-E/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, featuring a 180 MHz CPU core, 512 KB of Flash program memory, and 128 KB of SRAM, packaged in a 144-pin TFBGA (7x7 mm, 1.02 mm height). The part is supplied in Tray packaging and is rated for the -40C to +125C extended (E) temperature range suitable for industrial and automotive-grade applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals; the PIC32MZ EF family represents Microchip's high-end 32-bit MCU tier, positioned between standard microcontrollers and application processors. The PIC32MZ EF series targets connectivity, industrial automation, automotive, IoT, graphics/HMI, and motor control applications by combining a high-performance MIPS32 core with rich connectivity peripherals such as Ethernet, USB, CAN (omitted in this "No CAN" variant), and high-speed ADCs. Key features of the PIC32MZ0512EFE144-E/JWX include a MIPS32 M-Class core with DSP instructions, up to 120 general-purpose I/O pins, integrated 12-bit ADC and analog comparators, multiple UART/SPI/I2C peripherals, hardware crypto acceleration is omitted in the "EFE" variant, and CAN-FD is omitted per the "No CAN" suffix. The wide operating voltage range of 2.0V to 3.6V supports both battery-powered and industrial 3.3V systems. The 144-TFBGA package footprint keeps the device compatible with the rest of the PIC32MZ EF 144-pin family, enabling PCB layout reuse across variants. Typical applications include industrial control panels, building automation gateways, USB/Ethernet-connected sensor hubs, low-cost graphics HMI displays, and BLDC/PMSM motor control firmware. The combination of large Flash and SRAM resources makes the part well-suited to embedded protocol stacks (TCP/IP, MQTT, USB device classes) without external memory. When designing with this MCU, place decoupling capacitors (100 nF plus 4.7 uF bulk) within 3 mm of each power pin and follow Microchip's TFBGA layout guidelines for the 0.5 mm pitch land pattern to ensure reliable reflow. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MZ family, and practical design notes that are not present in the manufacturer datasheet. Engineers evaluating the PIC32MZ0512EFE144-E/JWX should treat it as the cost-optimized member of the EF family and use the comparison table to weigh it against higher-speed and larger-memory siblings.

Запрос цены Контакты

PIC32MZ0512EFE144-E/PH

PIC32MZ0512EFE144-E/PH - 180MHz 32-bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFE144-E/PH is a 32-bit MIPS32 M-Class microcontroller running up to 180 MHz with 512 KB of Flash and 128 KB of SRAM, housed in a 144-pin TQFP (16x16 mm) package. The -E suffix indicates the extended industrial temperature grade (-40C to +125C), making it suitable for harsh-environment and AEC-Q100-adjacent applications. The device integrates a hardware Floating Point Unit (FPU), four 64-bit accumulators, single-cycle MAC, and IEEE 754-compliant math for DSP workloads. What is a PIC32MZ EF microcontroller? The PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family is Microchip's premium 32-bit MIPS Warrior M-class line that combines high-performance CPU cores with rich connectivity peripherals. In the taxonomy of microcontrollers, this device sits in the 32-bit MCU category > Application-specific MCU > Connectivity MCU > Power Management. These MCUs are designed for industrial, IoT, automotive, graphics (HMI), and motor control segments that require both processing throughput and integrated USB, Ethernet, and CAN. Key features include a 200 MHz / 330 DMIPS core (the -E variant is derated to 180 MHz for thermal envelope), 12-bit ADC at 18 MSPS, dedicated USB 2.0 High-speed PHY, 10/100 Ethernet MAC with IEEE 1588 support, CAN 2.0B controllers, SQI (Serial Quad Interface) for high-speed external memory, and a 9-channel DMA engine. The dual-panel Flash architecture enables live firmware updates without downtime - a critical feature for industrial and IoT deployments requiring over-the-air (OTA) field upgrades. Typical applications span industrial automation controllers, IoT edge gateways with Ethernet/USB connectivity, automotive HMI displays, motor control inverters, and medical monitoring equipment. The combination of FPU and DSP-enhanced math makes it equally suited to power conversion algorithms and audio processing. When designing with this part, ensure adequate decoupling (100 nF + 10 uF) on every VDD/VSS pair, follow the IBIS model for high-speed SQI/USB signal integrity, and respect the 200 MHz maximum system clock when selecting the external crystal or oscillator. This page synthesizes distributor pricing, drop-in alternative MPNs, and engineering design notes not found in the standalone manufacturer datasheet - giving procurement and design engineers a single reference for part selection, cross-reference, and BOM management.

Запрос цены Контакты

PIC32MZ0512EFE144-E/PL

PIC32MZ0512EFE144-E/PL - 200MHz 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ0512EFE144-E/PL is a 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, running up to 200 MHz core clock and delivering 330 DMIPS with an integrated IEEE 754-compliant FPU and DSP-enhanced core. It is housed in a 144-pin LQFP package (PL) at 20x20 mm body size, integrating 512 KB Flash with Dual Panel Live-Update support and 128 KB SRAM. The 'E' suffix designates the -40C to +125C extended operating temperature range targeting automotive and industrial applications. A 32-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals on one silicon die. Within Microchip's taxonomy, PIC32MZ EF devices sit in the high-performance tier above PIC32MX and are part of the broader MIPS-based 32-bit MCU category competing with ARM Cortex-M4/M7 parts. The FPU and DSP extensions make these MCUs well suited to signal-processing tasks traditionally handled by dedicated DSPs. Key features include HS USB 2.0 (Host/Device/OTG), 10/100 Mbps Ethernet MAC with MII/RMII interfaces, two SQI (Serial Quad Interface) ports for high-speed serial Flash expansion, up to 12-bit ADC with 18 MSPS sampling rate, advanced analog comparators, multiple UART/SPI/I2C channels, and a graphics-capable PMP (Parallel Master Port) for direct LCD drive. The integrated crypto-less design of the 'E' variant reduces BOM cost for non-security-critical deployments. Typical applications include industrial IoT gateways requiring Ethernet, automotive HMI and telematics, USB-enabled embedded products (audio docks, HID peripherals), building automation controllers, and motor-control BLDC/PMSM drive boards where the FPU accelerates Clarke-Park transforms. MPLAB Harmony v3 framework support enables rapid peripheral driver generation. When designing with this device, plan the 144-pin LQFP layout carefully - the 0.5 mm pitch and 20x20 mm body demand 4-layer PCB with 0.2 mm/0.2 mm trace/spacing minimums for assembly yield. Decouple VDDCORE with 1 uF + 100 nF per pin and reserve boot-mode pull-ups on PGECx/PGEDx pairs for ICSP programming.

Запрос цены Контакты

PIC32MZ0512EFE144-I/PH

PIC32MZ0512EFE144-I/PH - 200MHz 32-bit MCU 512KB Flash 144-TQFP | Microchip

The Microchip Technology PIC32MZ0512EFE144-I/PH is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz, integrating 512 KB Flash and 128 KB SRAM in a 144-pin TQFP (16x16 mm) package. It belongs to the PIC32MZ EF family of "Embedded Connectivity with Floating Point Unit" devices, featuring an IEEE 754-compliant hardware FPU, a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, plus dedicated audio (I2S) and graphics (EBI) interfaces. The device is offered without on-board crypto acceleration (No Crypto suffix), reducing cost for designs that do not require hardware AES/SHA. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, ADC, communication interfaces) into one package. The PIC32MZ family sits in the hierarchy 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. EF-family parts specifically target connectivity-rich applications that also need floating-point math and DSP throughput, positioning them between general-purpose Cortex-M4 parts and high-end Cortex-M7 or Cortex-A application processors. Key features of the PIC32MZ0512EFE144-I/PH include HS USB 2.0 (Host/Device/OTG), 10/100 Mbps Ethernet MAC, dual CAN 2.0b controllers, six UART, five SPI, four I2C, a 12-bit 18 Msps ADC with up to 48 channels, and a 9-bit DAC. Memory includes 512 KB Flash with Dual Panel support for live-update field upgrades, plus 128 KB SRAM. Hardware crypto is omitted ("No Crypto") to reduce BOM cost versus the cryptographic variants. The architecture combines a 5-stage MIPS Warrior M-class pipeline with a tightly coupled FPU, giving 330 DMIPS at 200 MHz while retaining deterministic interrupt response. Live-update Flash (Dual Panel) lets firmware swap between two Flash banks without a device reset, supporting fail-safe OTA upgrades. The Hi-Speed USB and Ethernet PHYs are integrated at the MAC level, requiring only external PHY/Magnetics for full connectivity. Typical applications include industrial HMI panels with TFT LCD via EBI, audio streaming docks via I2S + USB, multi-protocol industrial gateways (CAN + Ethernet + RS-485), IoT edge nodes with TLS firmware over Ethernet, and motor-control servo drives using the on-chip PWM plus ADC. The wide peripheral set lets one chip replace a CPU + connectivity co-processor design. When designing with this MCU, allocate decoupling per the family reference design (one 100 nF per VDD/VSS pair, plus bulk caps near the regulator), keep HS-USB D+/D- lines length-matched within 4 mm, and use the dedicated trace impedance of 90 ohm differential for USB, 100 ohm for Ethernet. Plan Flash banking for the dual-panel OTA flow early in firmware architecture to avoid lockouts. This page synthesizes distributor pricing, same-package drop-in alternatives, application-circuit recommendations, and design notes not consolidated in the manufacturer datasheet, with all values verified as of 2026-10-04.

Запрос цены Контакты

PIC32MZ0512EFE144-I/PL

PIC32MZ0512EFE144-I/PL - 200MHz 32-Bit MCU 512KB Flash | Microchip

The Microchip PIC32MZ0512EFE144-I/PL is a high-performance MIPS32 M-Class 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, delivering 200 MHz CPU clock and 330 DMIPS performance with integrated FPU and DSP extensions. It features 512 KB Flash and 128 KB SRAM in a 144-pin LQFP (20x20 mm) package, with 3.3V single-supply operation. The device integrates dual-panel flash for live-update support, IEEE 754 compliant FPU, and four 64-bit accumulators with single-cycle MAC and saturating fractional math, enabling high-throughput signal processing. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, providing substantially higher arithmetic throughput than 8-bit or 16-bit MCUs while retaining deterministic real-time behaviour. Modern 32-bit MCUs integrate CPU core, flash program memory, SRAM, ADCs, communication peripherals, and timers on a single die. PIC32MZ EF parts belong to the broader RISC microcontroller taxonomy (CPU -> RISC -> 32-bit MCU -> ARM/MIPS variants -> PIC32MZ EF family), and are typically deployed in connected and graphics-rich embedded systems where MIPS-class cores outclass Cortex-M0/M3 in DSP workloads. Key differentiating features include up to 252 MHz operation (for higher-grade family members), 2 MB live-update Flash option, integrated HS USB, Ethernet MAC, CAN, and advanced analog including 12-bit ADC at 18 MSPS. The EF family specifically targets connectivity, industrial, automotive, IoT, graphics (HMI), and motor control market segments, with hardware crypto absent on this 'No Crypto' variant. Compared to lower-tier PIC32MX parts, EF devices deliver 2-3x the DMIPS and add a true IEEE-754 FPU. Architecture: MIPS Warrior M-class core with 16KB I-cache, 4KB D-cache, tightly-coupled memory, and a 7-stage pipeline. The peripheral set includes SQI for external serial flash, multiple UART/SPI/I2C, and high-speed connectivity IPs. The 144-LQFP package provides 120+ usable I/O with PPS (Peripheral Pin Select) remapping. Typical applications include industrial Ethernet gateways, IoT edge nodes with TLS acceleration, multi-axis motor control (FOC), graphics HMI panels, automotive body/comfort modules, and audio DSP. The 'No Crypto' suffix indicates no hardware encryption engine, so secure applications should select the crypto-enabled variant. When designing with this device, route the two PGECx/PGEDx ICSP pairs to accessible debug headers, provide a 12 MHz primary crystal or use the internal FRC, and ensure 100 nF + 10 µF decoupling close to each VDD/VSS pair. For 252 MHz operation, verify the -E extended-temperature grade and follow the datasheet's high-speed layout guidelines for USB and Ethernet differential pairs. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

Подкатегории

Товары (32787)

PIC32MX795F512LT-80V/BG - 80MHz 32-bit MCU, 512KB Flash | Microchip

PIC32MX795F512LT-80V/PF - 80MHz 32-bit MCU 512KB Flash | Microchip

PIC32MXMX210F016B-I/SP - 40MHz 32-bit MCU 16KB Flash 28-SPDIP | Microchip

PIC32MXMX230F064B-I/SP - 32-bit MCU, 64KB Flash, 40MHz, 28-SPDIP | Microchip Technology

PIC32MXMX775F512LT-80V/PT - 80MHz 512KB Flash MCU | Microchip

PIC32MZ0512EFE064-E/MR - 32-bit 180MHz MCU, 512KB Flash | Microchip

PIC32MZ0512EFE064-E/PT - 32-bit 200MHz MCU 512KB Flash | Microchip

PIC32MZ0512EFE064T-I/MR - 200MHz 32-bit MCU, 512KB Flash | Microchip

PIC32MZ0512EFE100-E/GJX - 200MHz 512KB Flash MCU TFBGA-100 | Microchip

PIC32MZ0512EFE100-E/PT - 32-bit 180MHz MCU 512KB Flash | Microchip

PIC32MZ0512EFE100-I/GJX - 200MHz 32-bit FPU MCU 512KB Flash | Microchip

PIC32MZ0512EFE100-I/PF - 200MHz 32-bit MCU 512KB Flash | Microchip

PIC32MZ0512EFE100-I/PT - 200MHz 512KB Flash MCU | Microchip

PIC32MZ0512EFE100T-E/GJX - 200MHz 32-bit MCU 512KB Flash TFBGA-100

PIC32MZ0512EFE100T-I/GJX - 200MHz 32-bit MCU 512KB Flash | Microchip

PIC32MZ0512EFE100T-I/PT - 200MHz 512KB Flash MCU | Microchip

PIC32MZ0512EFE124-E/TL - 32-bit MCU 200MHz 512KB Flash 124-VTLA | Microchip

PIC32MZ0512EFE124-I/TL - 32-bit MCU, 200MHz, 512KB Flash, USB-HS, Ethernet | Microchip

PIC32MZ0512EFE124T-I/TL - 200MHz 512KB Flash 32-bit MCU | Microchip

PIC32MZ0512EFE144-E/JWX - 32-bit 180MHz MCU 512KB Flash | Microchip

PIC32MZ0512EFE144-E/PH - 180MHz 32-bit MCU, 512KB Flash | Microchip

PIC32MZ0512EFE144-E/PL - 200MHz 512KB Flash 32-bit MCU | Microchip

PIC32MZ0512EFE144-I/PH - 200MHz 32-bit MCU 512KB Flash 144-TQFP | Microchip

PIC32MZ0512EFE144-I/PL - 200MHz 32-Bit MCU 512KB Flash | Microchip