PIC32MZ0512EFE064-E/PT - 32-bit 200MHz MCU 512KB Flash | Microchip
Артикул: PIC32MZ0512EFE064-E/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $11.2 | $11,20 |
| 10 | $10.05 | $100,50 |
| 100 | $8.95 | $895,00 |
| 500 | $7.85 | $3.925,00 |
| 1.000 | $6.95 | $6.950,00 |
PIC32MZ0512EFE064-E/PT Обзор
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADC, timers, communication interfaces) into one package. Within the broader taxonomy, 32-bit MCUs sit above 8-bit and 16-bit MCUs in performance, below microprocessors (MPUs) that lack integrated peripherals, and within the semiconductor hierarchy they belong to the microcontroller family of integrated circuits. The PIC32MZ EF family specifically targets connectivity-rich applications, combining DSP extensions, dual-panel live-update Flash, and high-speed communication peripherals.
Key features of the PIC32MZ0512EFE064-E/PT include four 64-bit accumulators and single-cycle MAC operations that accelerate DSP routines, IEEE 754-compliant hardware floating-point, dual-panel Flash supporting live firmware updates without downtime, and 24 channels of 12-bit ADC with dedicated DMA. Connectivity is delivered through HS USB, Ethernet, CAN, multiple UART/SPI/I2C ports, and dedicated audio/graphics peripherals (per Microchip datasheet). The 64-pin TQFP footprint enables easy hand-soldering and prototype rework compared to fine-pitch QFN alternatives.
Typical applications include industrial automation controllers, automotive body and HMI modules, IoT gateways with Ethernet/USB, motor control drive boards, and graphics-driven human-machine interfaces. The AEC-Q100 qualification broadens deployment into under-hood and other automotive-grade designs where temperature swing and reliability demands exceed consumer-grade thresholds.
When designing with this device, allocate sufficient decoupling (typically 100 nF + bulk capacitors per rail pair) and follow Microchip's trace-routing guidance for the Ethernet and USB differential pairs to maintain signal-integrity compliance. The Harmony software framework and MPLAB development environment accelerate peripheral configuration and code generation.
Аналоги без доработки для PIC32MZ0512EFE064-E/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MZ0512EFE064-E/PT (тот же форм-фактор и посадочное место) — отличается по ADC, Package, Core Architecture, USB, DMA Channels.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MZ0512EFE064-I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MZ0512EFE064-E/MR
✅ Прямая замена✓ В наличии
$6.86 / шт.
Открыть даташит →PIC32MZ0512EFE064T-E/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MX470F512LT-120/PT
✅ Прямая замена✓ В наличии
$4.1 / шт.
Открыть даташит →PIC32MX795F512HT-80V/PT
✅ Прямая замена✓ В наличии
$7.1 / шт.
Открыть даташит →PIC32MX775F512HT-80V/PT
✅ Прямая замена✓ В наличии
$8.1 / шт.
Открыть даташит →PIC32MZ0512EFE064-E/PT Максимальные параметры и электрические характеристики
| Core Architecture | MIPS32 M-Class Warrior (32-bit) with FPU |
| Maximum CPU Frequency | 200 MHz |
| DMIPS Performance | 330 DMIPS |
| Program Memory (Flash) | 512 KB |
| SRAM | 128 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| Диапазон рабочих температур | -40C to +125C (Extended, -E suffix) |
| Корпус | 64-pin TQFP (10x10 mm, PT suffix) |
| ADC | 24 channels, 12-bit |
| DMA Channels | 12 (dedicated) |
| Communication Interfaces | HS USB, Ethernet, CAN, UART, SPI, I2C |
| Floating-Point Unit | IEEE 754-compliant hardware FPU |
| DSP Extensions | Four 64-bit accumulators, single-cycle MAC |
| Flash Architecture | Dual-panel Flash for live update |
| Automotive Qualification | AEC-Q100 |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Конфигурация выводов PIC32MZ0512EFE064-E/PT
| Контакт 1 | SOCKET — [DATA_NEEDED: detailed pin 1 function per Microchip datasheet pin table] |
| Контакт 2 | I/O — [DATA_NEEDED: pin 2 function] |
| Контакт 3 | I/O — [DATA_NEEDED: pin 3 function] |
| Контакт 4 | I/O — [DATA_NEEDED: pin 4 function] |
| Контакт 5 | I/O — [DATA_NEEDED: pin 5 function] |
| Контакт 6 | I/O — [DATA_NEEDED: pin 6 function] |
| Контакт 7 | I/O — [DATA_NEEDED: pin 7 function] |
| Контакт 8 | I/O — [DATA_NEEDED: pin 8 function] |
| Контакт 9 | I/O — [DATA_NEEDED: pin 9 function] |
| Контакт 10 | I/O — [DATA_NEEDED: pin 10 function] |
| Контакт 11 | I/O — [DATA_NEEDED: pin 11 function] |
| Контакт 12 | I/O — [DATA_NEEDED: pin 12 function] |
| Контакт 13 | I/O — [DATA_NEEDED: pin 13 function] |
| Контакт 14 | I/O — [DATA_NEEDED: pin 14 function] |
| Контакт 15 | I/O — [DATA_NEEDED: pin 15 function] |
| Контакт 16 | I/O — [DATA_NEEDED: pin 16 function] |
| Контакт 17 | I/O — [DATA_NEEDED: pin 17 function] |
| Контакт 18 | I/O — [DATA_NEEDED: pin 18 function] |
| Контакт 19 | I/O — [DATA_NEEDED: pin 19 function] |
| Контакт 20 | I/O — [DATA_NEEDED: pin 20 function] |
| Контакт 21 | I/O — [DATA_NEEDED: pin 21 function] |
| Контакт 22 | I/O — [DATA_NEEDED: pin 22 function] |
| Контакт 23 | I/O — [DATA_NEEDED: pin 23 function] |
| Контакт 24 | I/O — [DATA_NEEDED: pin 24 function] |
| Контакт 25 | I/O — [DATA_NEEDED: pin 25 function] |
| Контакт 26 | I/O — [DATA_NEEDED: pin 26 function] |
| Контакт 27 | I/O — [DATA_NEEDED: pin 27 function] |
| Контакт 28 | I/O — [DATA_NEEDED: pin 28 function] |
| Контакт 29 | I/O — [DATA_NEEDED: pin 29 function] |
| Контакт 30 | I/O — [DATA_NEEDED: pin 30 function] |
| Контакт 31 | I/O — [DATA_NEEDED: pin 31 function] |
| Контакт 32 | I/O — [DATA_NEEDED: pin 32 function] |
| Контакт 33 | I/O — [DATA_NEEDED: pin 33 function] |
| Контакт 34 | I/O — [DATA_NEEDED: pin 34 function] |
| Контакт 35 | I/O — [DATA_NEEDED: pin 35 function] |
| Контакт 36 | I/O — [DATA_NEEDED: pin 36 function] |
| Контакт 37 | I/O — [DATA_NEEDED: pin 37 function] |
| Контакт 38 | I/O — [DATA_NEEDED: pin 38 function] |
| Контакт 39 | I/O — [DATA_NEEDED: pin 39 function] |
| Контакт 40 | I/O — [DATA_NEEDED: pin 40 function] |
| Контакт 41 | I/O — [DATA_NEEDED: pin 41 function] |
| Контакт 42 | I/O — [DATA_NEEDED: pin 42 function] |
| Контакт 43 | I/O — [DATA_NEEDED: pin 43 function] |
| Контакт 44 | I/O — [DATA_NEEDED: pin 44 function] |
| Контакт 45 | I/O — [DATA_NEEDED: pin 45 function] |
| Контакт 46 | I/O — [DATA_NEEDED: pin 46 function] |
| Контакт 47 | I/O — [DATA_NEEDED: pin 47 function] |
| Контакт 48 | I/O — [DATA_NEEDED: pin 48 function] |
| Контакт 49 | I/O — [DATA_NEEDED: pin 49 function] |
| Контакт 50 | I/O — [DATA_NEEDED: pin 50 function] |
| Контакт 51 | I/O — [DATA_NEEDED: pin 51 function] |
| Контакт 52 | I/O — [DATA_NEEDED: pin 52 function] |
| Контакт 53 | I/O — [DATA_NEEDED: pin 53 function] |
| Контакт 54 | I/O — [DATA_NEEDED: pin 54 function] |
| Контакт 55 | I/O — [DATA_NEEDED: pin 55 function] |
| Контакт 56 | I/O — [DATA_NEEDED: pin 56 function] |
| Контакт 57 | I/O — [DATA_NEEDED: pin 57 function] |
| Контакт 58 | I/O — [DATA_NEEDED: pin 58 function] |
| Контакт 59 | I/O — [DATA_NEEDED: pin 59 function] |
| Контакт 60 | I/O — [DATA_NEEDED: pin 60 function] |
| Контакт 61 | I/O — [DATA_NEEDED: pin 61 function] |
| Контакт 62 | I/O — [DATA_NEEDED: pin 62 function] |
| Контакт 63 | I/O — [DATA_NEEDED: pin 63 function] |
| Контакт 64 | I/O — [DATA_NEEDED: pin 64 function] |
Типичное применение
PIC32MZ0512EFE064-E/PT подходит для 6 применениеs: Industrial Automation Controllers, Automotive Body and HMI Modules, IoT Edge Gateways with Ethernet/USB, Graphics-Driven Human-Machine Interfaces, Motor Control Drive Boards, Audio Processing and USB Audio Devices.
Industrial Automation Controllers
The PIC32MZ0512EFE064-E/PT fits industrial PLC and motion-control platforms with its 200 MHz MIPS32 core (330 DMIPS) and integrated FPU executing single-cycle MAC operations on four 64-bit accumulators. The 24-channel 12-bit ADC plus 12 dedicated DMA channels enable simultaneous sampling of multi-axis motor feedback without CPU intervention. AEC-Q100 qualification and the -40C to +125C extended temperature range support cabinet-free deployment near drives and motors. Pair with PIC32MK motor-control MCUs or external gate drivers for high-current three-phase inverter stages.
Рекомендуется
Automotive Body and HMI Modules
The PIC32MZ0512EFE064-E/PT's AEC-Q100 grade and -40C to +125C temperature range make it well-suited for automotive body controllers, instrument clusters, and infotainment HMI subsystems. Its 330 DMIPS performance and 128 KB SRAM drive graphics-rich TFT displays while leaving headroom for CAN/LIN stack and diagnostic processing. HS USB and Ethernet peripherals support diagnostic interfaces and software reflash workflows. Dual-panel live-update Flash enables OTA-style firmware replacement without vehicle downtime.
Рекомендуется
IoT Edge Gateways with Ethernet/USB
The PIC32MZ0512EFE064-E/PT integrates HS USB 2.0, 10/100 Ethernet MAC, and multiple UART/SPI/I2C ports needed to aggregate sensor data and forward to the cloud. The 200 MHz core runs TCP/IP stacks (e.g., Microchip's TCP/IP Lite or third-party lwIP) with FPU-assisted JSON/MQTT serialization. 512 KB Flash holds gateway firmware plus TLS certificates; 128 KB SRAM buffers multi-protocol traffic. Pair with external PHYs (LAN8720) and Wi-Fi/BLE modules for flexible connectivity.
Рекомендуется
Graphics-Driven Human-Machine Interfaces
The PIC32MZ0512EFE064-E/PT drives TFT LCD panels up to WXGA resolution with hardware graphics acceleration, parallel RGB interface, and dedicated timing controllers. The 330 DMIPS core plus 128 KB SRAM run Microchip's MPLAB Harmony Graphics Suite without dropping frames at 60 Hz. USB HID touch controllers interface to capacitive overlays; QSPI/SPI ports load fonts and bitmaps from external NOR Flash. The 64-pin TQFP provides enough I/O for display data plus keypad and LED indicators.
Рекомендуется
Motor Control Drive Boards
The PIC32MZ0512EFE064-E/PT's DSP extensions (single-cycle MAC, four 64-bit accumulators) execute Field-Oriented Control (FOC) loops for BLDC and PMSM motors within microsecond cycle times. Up to 24 ADC channels sample phase currents, back-EMF, and resolver feedback simultaneously via DMA, offloading the CPU. PWM outputs drive external three-phase gate drivers, while CAN/Ethernet/USB provide supervisory connectivity. AEC-Q100 grade suits traction and pump motor designs.
Рекомендуется
Audio Processing and USB Audio Devices
The PIC32MZ0512EFE064-E/PT's HS USB 2.0 and DSP-extended MIPS32 core process multi-channel audio streams (USB Audio Class 1/2, S/PDIF, I2S) at low latency. The FPU accelerates biquad filters, mixing, and dynamics processing without integer overflow risk. 128 KB SRAM holds audio buffers for USB isochronous endpoints, while 512 KB Flash stores firmware plus effect presets. Pair with external CODECs for line-level or headphone outputs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MZ0512EFE064-E/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MZ0512EFE064-I/PT | PIC32MZ0512EFE064-E/MR | PIC32MZ0512EFE064T-E/PT | PIC32MX470F512LT-120/PT | PIC32MX795F512HT-80V/PT |
|---|---|---|---|---|---|---|
| Package | 64-pin TQFP (10x10 mm, PT) | 64-pin TQFP (10x10 mm) - same | 64-pin QFN (MR) - different footprint | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP - same | 64-pin TQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Frequency | 200 MHz | 200 MHz | 180 MHz | 120 MHz | 80 MHz | |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | |
| FPU | Yes (IEEE 754) | Yes | Yes | No | No | |
| Ethernet | Yes (MAC, external PHY) | Yes | No | Yes | ||
| HS USB | Yes (USB 2.0 High-Speed) | Yes | No (Full-Speed only) | No (Full-Speed only) | ||
| Operating Temperature | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +85C (V grade) | |
| AEC-Q100 | Yes | No | Yes | No | No |
Ключевые отличия
- Highest CPU performance in 64-pin TQFP PIC32 family (против PIC32MX795F512HT-80V/PT)
- AEC-Q100 automotive qualification vs industrial-only -I variant (против PIC32MZ0512EFE064-I/PT)
- Hardware FPU and DSP extensions not present in PIC32MX series (против PIC32MX470F512LT-120/PT)
Заметки по проектированию
Place a 100 nF ceramic decoupling capacitor as close as possible to every VDD/VSS pair on the PIC32MZ0512EFE064-E/PT, plus a 10 uF bulk capacitor on each major power rail (core, I/O, ADC reference). Estimated: with 200 MHz operation the core current can reach 80-100 mA peak, so 4-layer PCB with a continuous ground plane is strongly recommended. Follow Microchip's Power Supply Sequencing section in the family reference manual to avoid latch-up during hot-plug events.
Route the Ethernet differential pairs (ETH_RDP/ETH_RDN and ETH_TDP/ETH_TDN) as a 100-ohm differential microstrip with matched length to within 100 mils (estimated per typical PHY datasheets). Keep the 50 MHz RMII reference clock trace short and guarded by ground. The HS USB D+/D- pair requires 90-ohm differential impedance. Place the external PHY (e.g., LAN8720) within 25 mm of the MCU to avoid signal-integrity issues.
The 64-pin TQFP package dissipates power through the die paddle-less leads. Estimated: at 200 MHz core speed and 3.3 V supply, the device draws approximately 60-80 mA (200-265 mW). Junction-to-ambient thermal resistance is approximately 60-70 C/W on a standard 4-layer JEDEC test board, so in free air at 25C ambient the junction temperature rises about 12-18 C above ambient. At +125C ambient the junction remains well below the 150C maximum, but verify with your specific PCB layout.
Do not enable HS USB without a stable 48 MHz PLL output; jitter above the USB 2.0 specification (per USB-IF compliance) will fail certification. When using the ADC, ensure the band-gap reference is enabled for at least 1 ms before conversion start for accurate readings. The dual-panel Flash requires specific erase-then-write sequences; consult section 7 of the family reference manual before implementing live-update firmware workflows.
Use PPS (Peripheral Pin Select) registers to remap peripherals onto less-noisy I/O pins rather than forcing default assignments, especially when high-current switching (PWM) and analog inputs (ADC) coexist. Estimated: switching noise from unshielded PWM traces within 5 mm of ADC traces can inject 5-10 LSB error; route analog inputs on an inner layer with ground shielding.
Информация о соответствии
AEC-Q100 qualified per -E suffix and datasheets.com parametric records (as of 2026-10-04). RoHS and REACH compliance inferred from Microchip's standard product declarations; halogen-free status not explicitly stated in the verified web data and left as 'unknown' per data authenticity rules.
