Интегральные схемы

PIC32MZ0512EFE144T-I/PL

PIC32MZ0512EFE144T-I/PL - 200MHz 512KB Flash MCU | Microchip

The Microchip PIC32MZ0512EFE144T-I/PL is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, delivering up to 200 MHz core clock with 330 DMIPS performance and an integrated IEEE 754-compliant FPU in a 144-pin LQFP (20x20 mm) package. The device provides 512 KB Flash with live-update dual-panel architecture and 128 KB SRAM, targeting connected industrial, IoT, graphics HMI, and motor-control designs. A 32-bit microcontroller (MCU) is a microprocessor core combined with on-chip memory, peripherals, and I/O on a single silicon die. The PIC32MZ EF family sits within Microchip's higher-tier PIC32 lineup, with the M-Class MIPS Warrior core providing DSP extensions including single-cycle MAC, four 64-bit accumulators, saturating and fractional math. The FPU accelerates IEEE 754 single- and double-precision operations, making the family suitable for graphics, audio processing, and control loops. The dual-panel Flash supports live firmware updates without downtime, a key differentiator for industrial and IoT applications. The PIC32MZ0512EFE144T-I/PL integrates a hardware crypto accelerator (No Crypto variant in this MPN suffix), 12-bit 18 Msps ADC, high-speed USB, CAN, Ethernet, and a wide range of communication peripherals. Its 200 MHz CPU, DSP extensions, and FPU enable real-time signal processing tasks such as FFT-based motor control and graphics rendering for HMI displays. The device operates from 2.5V to 3.6V across the industrial -40C to +85C temperature range. Typical applications include industrial automation controllers, IoT edge nodes, HMI displays with graphics, BLDC/PMSM motor drives, and connected medical devices. The wide peripheral mix and large SRAM make it well suited as a system-on-chip in cost- and space-constrained designs where an external MPU plus companion ICs would add BOM cost. When designing with this device, ensure the 144-pin LQFP PCB layout provides adequate ground and power decoupling, with a 0.1uF ceramic cap on every VDD pin. The dual-panel Flash requires firmware designed for live-update partition management, and the Ethernet MAC needs an external PHY plus magnetics for 100 Mbps operation. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ0512EFF064-E/MR

PIC32MZ0512EFF064-E/MR - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF064-E/MR is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, running up to 200 MHz with up to 330 DMIPS, packaged in a 64-pin QFN (MR, 9x9 mm). It integrates 512 KB of Flash program memory and 128 KB of SRAM with FPU and DSP extensions, targeting Industrial, IoT, Graphics (HMI), Motor Control, and Automotive connectivity applications. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, memory (Flash + SRAM), and peripherals into one package. PIC32 microcontrollers are 32-bit MIPS-based MCUs with deterministic real-time performance. The PIC32MZ EF family adds a Floating Point Unit (FPU) and a MIPS Warrior M-class DSP-enhanced core to accelerate single-cycle MAC, saturating and fractional math operations in compliance with IEEE 754. In the broader taxonomy: MCU -> Microcontroller -> Embedded Processor -> Semiconductor -> Integrated Circuit. Key differentiating features include 200 MHz / 330 DMIPS core performance, IEEE 754-compliant FPU for fast single/double-precision math, four 64-bit accumulators, single-cycle MAC, and dual-panel Flash for live-update support. The device integrates Hi-Speed USB, 10/100 Ethernet MAC, CAN, SQI (Serial Quad Interface), and 12-bit ADC, providing extensive connectivity for industrial IoT gateways, automotive dashboards, and audio/graphics HMI applications. The PIC32MZ0512EFF064-E/MR is built on a low-power CMOS process and supports an extended temperature range suitable for harsh environments. The variant name decodes as follows: -E/ suffix denotes the -40C to +125C extended industrial temperature grade, /MR denotes the 64-pin QFN package. The device is also available without crypto acceleration for designs that don't require it. Typical applications include industrial control panels, IoT edge gateways with Ethernet connectivity, automotive instrument clusters, motor control inverters, and graphic HMI displays with touch. The 64-pin QFN package is suitable for compact designs where the 252 MHz-capable PIC32MZ EF family variants are also available. When designing with this MCU, allocate adequate decoupling (0.1 uF + bulk) near each VDD pin and follow the High-Speed USB and Ethernet PCB layout guidelines in the family reference manual. The QFN package has an exposed thermal pad that must be soldered to the ground plane for thermal dissipation and electrical performance. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes - information not consolidated in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ0512EFF064-E/PT

PIC32MZ0512EFF064-E/PT - 32-bit MIPS 180MHz MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF064-E/PT is a 32-bit MIPS32 M-Class microcontroller running at 180 MHz, integrating 512 KB of Flash and 128 KB of SRAM into a 64-pin TQFP (10x10 mm) package. It is part of the PIC32MZ EF family, which targets connectivity-rich embedded designs including industrial automation, automotive body/comfort, IoT gateways, HMI/graphics, and motor control segments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. The PIC32MZ EF family belongs to the MIPS Warrior M-class 32-bit core family, sitting above 8/16-bit MCUs in compute hierarchy and below application processors in Linux-capable devices, and the FPU-equipped variant places these parts in the signal-processing-capable microcontroller tier. Key features of the PIC32MZ0512EFF064-E/PT include a 200 MHz/330 DMIPS core with IEEE 754-compliant FPU, dual-panel Flash for live-update firmware swap, four 64-bit accumulators with single-cycle MAC and saturating/fractional math, a 12-bit ADC with up to 24 channels, multiple connectivity peripherals (CAN, Ethernet, I²C, SPI, SQI, PMP, USB), and 8 DMA channels. The 'No Crypto' suffix indicates the on-board crypto engine is disabled, reducing BOM cost for non-security-sensitive designs. Architecturally, the device combines a deterministic MIPS32 core with tightly coupled peripherals and a high-bandwidth bus matrix. The 180 MHz rating in this -E/PT industrial-temp ordering code contrasts with the 200 MHz headroom of the family; system designers should target 180 MHz for full peripheral operation across -40 °C to +125 °C. Live-update dual-panel Flash is the headline reliability feature, allowing field firmware upgrades with zero downtime by alternating between two Flash banks. Typical applications for the PIC32MZ0512EFF064-E/PT include industrial IoT gateways with Ethernet/USB, HMI panels using PMP for LCD drive, automotive body controllers over CAN, motor-control BLDC/PMSM drivers, and connected medical instrumentation. The AEC-Q100 screening makes the part acceptable for non-safety-critical automotive subsystems. When designing in this MCU, allocate decoupling capacitors on every VDD/VSS pair, use a 4-layer PCB to manage the 180 MHz edge rates, and verify boundary-scan coverage for production test. Programming/debugging uses the standard 2-wire ICSP interface plus the JTAG/SWD boundary-scan ports. This page consolidates distributor pricing, drop-in alternatives within the PIC32MZ EF family, and practical design notes drawn from the device family reference manual, supplementing the manufacturer datasheet with curated engineering context.

Запрос цены Контакты

PIC32MZ0512EFF064-I/PT

PIC32MZ0512EFF064-I/PT - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF064-I/PT is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz, integrating 512 KB of Flash program memory and 128 KB of SRAM in a 64-pin TQFP (10x10 mm) package with 0.50 mm pitch. The PIC32MZ EF family targets connectivity-rich applications and combines a MIPS32 microAptiv core with a hardware Floating Point Unit (FPU), HS USB 2.0 on-the-go, 10/100 Ethernet MAC, dual CAN 2.0b controllers, and a 50 MHz Serial Quad Interface (SQI) for external Flash/XIP expansion. An MCU (Microcontroller Unit) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals. Within the broader taxonomy, a 32-bit MCU sits above 8-bit and 16-bit MCUs in computational throughput; the PIC32MZ EF family specifically layers a high-performance MIPS32 core, FPU, and dedicated connectivity peripherals on top, placing it in the high-integration MCU category alongside ARM Cortex-M4/M7 based parts from competing vendors. This hierarchy matters when selecting memory footprint, peripheral count, and real-time determinism for a given application. Key features include a 200 MHz core clock (the I-grade silicon version), integrated crypto engine support (this MPN is the No-Crypto variant), 12-bit 500 ksps ADC with up to 41 analog inputs, two comparators, four I2C, six UART, four SPI, and an audio I2S/SSI interface for graphics and audio bridging. The device operates from 2.3 V to 3.6 V across the industrial -40C to +85C temperature range and includes an 8-channel DMA, nine 16-bit timers/counters, and an RTCC. A unique Peripheral Pin Select (PPS) remapping matrix allows flexible mapping of digital peripherals to physical I/O pins. Architecturally, the PIC32MZ EF pairs the MIPS32 microAptiv core with a dedicated FPU and a high-bandwidth bus matrix, while the integrated HS USB PHY and Ethernet MAC eliminate the need for external transceiver components on most designs. Compared to the older PIC32MX series, the EF family roughly doubles Dhrystone MIPS performance, raises Flash/SRAM density, and adds modern peripherals such as SQI and crypto. Typical applications include industrial HMI with TFT LCD, USB host/device peripherals, Ethernet-connected sensors and gateways, automotive body/CAN networks, audio bridges to I2S codecs, and graphics-accelerated IoT nodes. The industrial -40C to +85C range supports factory and outdoor enclosures without derating. Design with the PIC32MZ EF series requires careful PCB layout for the analog and high-speed digital sections; place the 12-bit ADC reference and VDD rails through ferrite beads and use the recommended 4-layer stack-up for the HS USB and Ethernet differential pairs. The SQI interface can be used to add a small external Quad-SPI Flash for non-volatile data logging when internal Flash is exhausted. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the PIC32MZ0512EFF064-I/PT that are not found in the standalone manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFF064T-I/MR

PIC32MZ0512EFF064T-I/MR - 200MHz 32-bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF064T-I/MR is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, delivering up to 200 MHz CPU performance with 512 KB of Flash program memory and 128 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed thermal pad. It integrates a hardware Floating Point Unit (FPU), HS USB 2.0 PHY, 10/100 Ethernet MAC, dual CAN 2.0b controllers, and a Serial Quad Interface (SQI) for high-speed external serial Flash, making it a single-chip connectivity platform for industrial, IoT, and graphical HMI designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, RAM, and a rich set of peripherals on a single die, enabling standalone embedded control. Within the broader semiconductor taxonomy, an MCU is a sub-category of microprocessors optimized for low power, deterministic real-time I/O, and small form-factor PCB integration. The PIC32MZ EF family specifically targets high-performance connected embedded designs that previously required a discrete MPU plus external peripherals. The PIC32MZ0512EFF064T-I/MR features 46 user I/O lines, multiple communication peripherals (UART, SPI, I2C, SQI, USB-HS, Ethernet, CAN), a 12-bit ADC with up to 48 channels, DMA with eight independent channels, and a 200 MHz core capable of 330 DMIPS and 1.5 DMIPS/MHz. The integrated FPU accelerates single- and double-precision floating-point math, simplifying sensor fusion, motor control, and audio DSP code. Live-Update Flash allows two independent Flash banks for in-field firmware upgrades without downtime, a key requirement for connected industrial and IoT endpoints. Architecturally, the PIC32MZ0512EFF064T-I/MR pairs the MIPS M-Class core with a multi-layer bus matrix that lets CPU, DMA, and the Ethernet MAC access RAM without contention. The 200 MHz operation with HS USB 2.0 (480 Mbps), 10/100 Ethernet MAC, dual CAN, and SQI delivering up to 80 MB/s to external Flash make this part a complete industrial connectivity node. The 9 mm x 9 mm QFN package with 0.5 mm pitch and an exposed pad supports compact PCB layouts while maintaining the thermal envelope required for industrial environments. Typical applications include industrial Ethernet gateways, USB audio class devices, CAN-based motor control nodes, graphical HMI panels, secure IoT edge nodes with encrypted firmware updates, multi-protocol industrial sensors, and automotive body/HMI subsystems requiring the same connectivity peripherals. The wide peripheral set eliminates external bridges, lowering both BOM cost and PCB area. When designing with this MCU, observe the 3.3 V (2.1 V to 3.6 V) supply window, route the exposed pad to a continuous ground plane, and provide separate analog and digital supply domains to maximize ADC accuracy. The Live-Update Flash feature requires careful linker-script planning to balance code across both banks. This page consolidates distributor pricing, parametric data, drop-in alternatives, and design notes beyond what is found in the manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFF064T-I/PT

PIC32MZ0512EFF064T-I/PT - 200MHz 512KB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ0512EFF064T-I/PT is a high-performance 32-bit MIPS M-Class microcontroller running at up to 200 MHz, integrating 512 KB of Flash and 128 KB of SRAM in a 64-pin TQFP (PT) package measuring 10x10 mm with 0.5 mm pitch. Part of the PIC32MZ EF family, this device targets connectivity-rich applications across industrial, IoT, graphics/HMI, and motor-control segments. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and a rich set of peripherals on one silicon die. Within the broader taxonomy, the PIC32MZ EF belongs to the 32-bit MCU class, which sits above 8/16-bit MCUs in processing power and is positioned between microprocessors and DSPs in compute density. Modern 32-bit MCUs like the PIC32MZ EF are the standard building blocks for connected, real-time embedded products. Key features include a MIPS32 M-Class core with hardware multiply/divide and DSP extensions, an integrated Floating-Point Unit (FPU) for single/double-precision math, 200 MHz operation delivering up to 252 MIPS, dual Flash panels with Live-Update for field firmware upgrades, and high-speed connectivity peripherals including HS USB, 10/100 Ethernet MAC, CAN 2.0B, SQI (Serial Quad Interface), and multiple UART/SPI/I2C ports. Advanced analog features include 12-bit ADC up to 18 Msps, analog comparators, and CTMU for touch sensing. Architecturally, the device combines deterministic real-time interrupt handling with rich graphics/audio interfaces (I2S, parallel graphics bus) and hardware crypto acceleration. The 512 KB Flash supports Live-Update partitioning, allowing safe firmware swap while running. The 64-pin TQFP provides 46 GPIO lines for parallel expansion. Typical applications include industrial Ethernet gateways, HMI touch panels, IoT edge nodes, motor-control BLDC drivers, and automotive infotainment subsystems. Its combination of connectivity, graphics, and DSP performance suits real-time connected embedded designs. When designing with this MCU, allocate adequate decoupling (100 nF per power pin plus bulk), follow TQFP land-pattern guidelines with thermal vias under the exposed pad, and reserve a dedicated 12 MHz crystal for the Ethernet PHY reference clock. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFF100-E/GJX

PIC32MZ0512EFF100-E/GJX - 200MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MZ0512EFF100-E/GJX is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, featuring a 200 MHz MIPS32 M-Class core with 330 DMIPS, 512 KB Flash, and 128 KB SRAM in a 100-pin TFBGA (7x7 mm) package. It integrates a single-precision IEEE 754 Floating Point Unit (FPU), a DSP-enhanced core with four 64-bit accumulators, and a rich connectivity peripheral set including HS USB, Ethernet MAC, CAN, and multiple UART/SPI/I2C interfaces. The device is AEC-Q100 qualified for automotive applications and operates across an extended -40C to +125C temperature range. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a processor core, program and data memory, and a configurable peripheral set. The PIC32MZ EF family is positioned at the high end of Microchip's PIC32 portfolio, targeting applications that demand deterministic real-time response combined with rich connectivity. Within the broader taxonomy, this part is a 32-bit microcontroller -> RISC MCU -> embedded processor -> semiconductor IC. The MIPS32 M-Class architecture supports hardware multiply-accumulate, saturating and fractional math, and DSP primitives that simplify audio and motor-control firmware. Key features include dual-panel Flash for live firmware update, 12-bit ADC at 18 Msps, analog comparators, multiple timer/counter modules, an 8-bit parallel master port (PMP) for graphics, and dedicated audio interfaces (I2S/AC97). The 100-TFBGA package is paired with Microchip's MPLAB Harmony development framework, providing integrated middleware for USB, TCP/IP, graphics, and motor control. Typical applications include industrial automation controllers, automotive body and HMI modules, IoT edge gateways with Ethernet, graphics display terminals, and sensor-hub platforms. The combination of CAN, Ethernet, and HS USB makes it well suited for connected industrial nodes, while the FPU and dual-panel Flash support safety-critical firmware with in-field update capability. Designers should pay close attention to the 100-TFBGA PCB layout, which requires microvia or laser-drilled via stack-ups; the high 200 MHz core speed demands careful power-plane decoupling. The dual-panel Flash feature requires the application to manage two program images and a bootloader partition. AEC-Q100 qualification simplifies automotive end-product certification. This page synthesizes distributor pricing, drop-in alternatives drawn from the PIC32MZ EF family, and practical PCB design notes that supplement the manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFF100-E/PT

PIC32MZ0512EFF100-E/PT - 200MHz MCU 512KB Flash TQFP-100 | Microchip

The Microchip Technology PIC32MZ0512EFF100-E/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, delivering 200 MHz / 330 DMIPS performance with a MIPS Warrior M-class core, single-precision IEEE 754 FPU, and DSP-enhanced MAC. It integrates 512 KB Flash and 128 KB SRAM into a 100-pin TQFP (12x12 mm) package, and runs from a 2.3V–3.6V supply. The -E suffix denotes the -40 °C to +125 °C extended operating range, and the part is AEC-Q100 qualified for automotive applications. What is a PIC32MZ EF microcontroller? The PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family is Microchip's high-tier 32-bit MCU line bridging industrial connectivity, graphics/HMI, and motor-control designs. Within the broader taxonomy, it is a 32-bit MIPS MCU → microcontroller → embedded processor → semiconductor. The EF sub-family adds the FPU, an HS USB 2.0 physical layer, 10/100 Ethernet MAC, dual CAN, SQI (Serial Quad Interface) for external Flash, and a 12-bit 18-channel ADC at 3.75 MSPS — positioning it between the Cortex-M4 mid-range and Cortex-M7 high-end ARM parts. Key specifications include: 512 KB dual-panel Flash supporting live update, 128 KB SRAM, 78 user I/O pins, a 200 MHz core with 4.7 µs wake-up from sleep, on-chip 32 KB I-cache / 32 KB D-cache, a Cryptographic Engine (RNG, AES, DES, SHA, MD5, HMAC) for secure IoT nodes, and a 32-channel DMA controller. The 100-pin TQFP package exposes USB-HS, ENET, CAN, SQI, I2S, SPI, I2C, EBI, and parallel PMP/EPMP interfaces — eliminating the need for external companion controllers. Architecturally, the device combines the MIPS microAptiv core with a seven-stage pipeline, dedicated DSP instructions, four 64-bit accumulators with single-cycle MAC, and fractional/saturating math. The dual-panel Flash layout enables LiveUpdate firmware swaps without downtime, while the dedicated Crypto Engine offloads TLS/DTLS handshake acceleration. Typical applications include industrial IoT gateways with Ethernet + TLS, automotive body/HMI controllers, multi-protocol motor-control FOCs, embedded graphics HMI panels, and secure POS terminals. The 78 I/O and rich peripheral set allow direct drive of TFT LCDs and motor bridges. When designing with this MCU, route the 12 MHz primary crystal within 5 mm of OSC1/OSC2 with a guard ring and keep the analog AVdd/AVss pair isolated with ferrite beads to protect the ADC SNR. The dual-panel Flash LiveUpdate feature requires a buttonless bootloader flow validated against the Microchip MPLAB Harmony v3 "LiveUpdate" template. This page synthesizes distributor pricing, AEC-Q100 qualified drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFF100-I/GJX

PIC32MZ0512EFF100-I/GJX - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF100-I/GJX is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz (330 DMIPS) with 512 KB Flash and 128 KB SRAM, packaged in a 100-pin TFBGA (7x7 mm) with IEEE 754 floating-point unit, HS USB, Ethernet, CAN, and advanced analog peripherals targeting industrial, IoT, automotive, graphics/HMI, and motor-control segments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of on-chip peripherals including timers, communication interfaces, and analog blocks. The PIC32MZ EF family sits in the high-performance tier of Microchip's 32-bit MCU portfolio (PIC32 -> 32-bit MCU -> embedded microcontroller -> semiconductor). The 'FPU for fast single/double precision math' block accelerates floating-point workloads while the four 64-bit accumulators with single-cycle MAC, saturating and fractional math optimize DSP code, making this part well-suited for audio decoding and signal conditioning. Key features include a 200 MHz/330 DMIPS MIPS Warrior M-class core, IEEE 754-compliant FPU, DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, dual-panel Flash for live-update support, 512 KB program Flash, 128 KB SRAM, HS USB 2.0 host/device/OTG, 10/100 Ethernet MAC, two CAN modules, six UART, four SPI, five I2C, 12-bit 18 MSPS ADC up to 48 channels, and a graphics interface with dedicated peripherals. The 100-pin TFBGA package gives 78 user I/O lines for connectivity-rich designs. Architecturally, the PIC32MZ EF combines a Harvard-class memory subsystem with 32-bit-wide paths and a tightly-coupled FPU pipeline. Live-update dual-panel Flash allows firmware swaps without downtime - useful for industrial gateways requiring uninterrupted service. The integrated crypto-less design (EFF suffix, distinct from EFM/EFC variants) keeps cost down for applications where encryption is handled externally or is not required. Typical applications include industrial Ethernet gateways and PLCs, automotive infotainment and body controllers, IoT edge nodes, HMI/graphics touch panels, and BLDC/PMSM motor control. The combination of CAN, Ethernet, and USB supports both automotive networks and industrial fieldbus bridging. When designing with this device, allocate careful PCB layout for the TFBGA - 0.65 mm pitch requires 4-layer or 6-layer stackup with microvia or via-in-pad if BGA breakout is dense. Use MPLAB Harmony 3 for peripheral drivers and consider the 200 MHz core current draw to size supply decoupling appropriately.

Запрос цены Контакты

PIC32MZ0512EFF100-I/PF

PIC32MZ0512EFF100-I/PF - 200MHz MCU, 512KB Flash, TQFP-100 | Microchip

The Microchip Technology PIC32MZ0512EFF100-I/PF is a 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, running up to 200 MHz and delivering 330 DMIPS, packaged in a 100-pin TQFP (14x14 mm). It integrates 512 KB Flash, 128 KB RAM, an IEEE 754-compliant hardware Floating Point Unit, and four 64-bit accumulators supporting single-cycle MAC, saturating, and fractional DSP math. The part exposes HS USB, Ethernet (MII/RMII), CAN, SQI, and advanced analog peripherals. Background. The PIC32MZ EF family is positioned by Microchip as a high-performance connectivity MCU family. It belongs to the MIPS Warrior M-class core lineage, which Microchip continued to license through the Imagination Technologies IP portfolio. Within the broader taxonomy, PIC32MZ EF devices sit under: microcontroller (MCU) -> 32-bit MCU -> MIPS-based MCU -> PIC32MZ EF family. They target Industrial, IoT, automotive, graphics/HMI, and motor control market segments where both DSP and connectivity are required. Key features include 200 MHz / 330 DMIPS core performance, dual-panel Flash for live-update support, integrated FPU for fast single- and double-precision math, Audio/Graphics peripherals (I2S, HMI TFT), HS USB 2.0 with on-chip PHY, 10/100 Ethernet MAC, two CAN 2.0b modules, a Serial Quad Interface (SQI) for high-throughput external Flash/PSRAM, and a 12-bit ADC with up to 48 channels and 2 MSPS sampling. The dual-panel Flash architecture enables firmware live-update without a bootloader, a rare capability for an MCU in this price tier. The FPU accelerates floating-point DSP math directly in hardware, freeing the CPU for control loops. HS USB with integrated PHY removes external component cost and simplifies PCB design. Typical applications include industrial Human-Machine Interface (HMI) panels with TFT LCD and touch, IoT gateways with Ethernet and Wi-Fi co-processor interfaces, automotive infotainment subsystems, motor control FOC drives, and high-speed audio processing. For industrial applications, the PIC32MZ0512EFF100-I/PF suits -40C to +85C operation and integrates connectivity for IIoT nodes. When designing with this device, ensure the SQI traces are length-matched and routed with controlled impedance for the highest SQI clock rate. The dual-panel Flash design requires the linker script to allocate functions to either panel; misuse can cause live-update failures. Decouple VDD with 1uF + 100nF pairs near each supply pin and route AVDD separately from DVDD. This page synthesizes distributor pricing, drop-in TQFP-100 alternatives, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ0512EFF100T-E/GJX

PIC32MZ0512EFF100T-E/GJX - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF100T-E/GJX is a 32-bit MIPS M-Class microcontroller running up to 200 MHz, integrating 512 KB Flash and 128 KB SRAM, supplied in a 100-pin TFBGA (7x7 mm) surface-mount package. As a member of the PIC32MZ EF family, it delivers 330 DMIPS throughput with single-cycle MAC DSP extensions, an IEEE 754 hardware floating-point unit, and a 32-bit core designed for high-performance embedded connectivity. The '-E' temperature grade supports an extended industrial range, while the '-T' tape-and-reel suffix indicates shipping format. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and programmable peripherals. 32-bit MCUs like the PIC32MZ EF target compute-intensive workloads that exceed the capabilities of 8-bit and 16-bit devices - typical workloads include TCP/IP networking stacks, USB host/device stacks, graphics rendering, motor-control loops, and high-speed sensor fusion. Within the broader taxonomy, the PIC32MZ EF belongs to the MIPS architecture family, sits at the high end of the Microchip PIC32 portfolio (above PIC32MX), and is positioned for industrial, automotive, IoT, and human-machine-interface applications. Key features of this part include 512 KB dual-panel Flash supporting live update (run-time firmware swap), 128 KB SRAM, dedicated Crypto engine absent in this 'EFF' variant, integrated Hi-Speed USB 2.0 host/device/OTG, two CAN 2.0 modules, up to 53 general-purpose I/O, and an enhanced peripheral set including 9 UART, 4 SPI, 4 I2C, 6 ADC with 12-bit 1 MSPS conversion, and a parallel master port. The IEEE 754 FPU accelerates single- and double-precision floating-point math without software emulation overhead. Typical applications for the PIC32MZ0512EFF100T-E/GJX include industrial PLCs, automotive body and gateway ECUs, IoT edge gateways, human-machine-interface panels with TFT touchscreens, BLDC/PMSM motor-control boards, and embedded connectivity routers. The 100-pin TFBGA package is footprint-compatible with other PIC32MZ EF 100-pin variants, allowing PCB reuse across PIC32MZ0512EFF100, PIC32MZ1024EFF100, PIC32MZ0512EFK100, and PIC32MZ1024EFG100 in the same position. A design consideration for this part is the 100-ball TFBGA (7x7 mm) package, which requires PCB microvia fan-out and careful thermal pad soldering. Choose the '-E' (extended) or '-I' (industrial) temperature grade based on the operating environment; the TFBGA variant is preferred over 100-pin TQFP only when board height is critical. This page synthesizes distributor pricing for the PIC32MZ0512EFF100T-E/GJX, Microchip drop-in alternatives in the same 100-pin TFBGA footprint, and practical design notes that go beyond the manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFF100T-I/GJX

PIC32MZ0512EFF100T-I/GJX - 200MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MZ0512EFF100T-I/GJX is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, operating at up to 200 MHz with 512 KB of Flash program memory and 128 KB of SRAM, housed in a 100-pin TFBGA (7x7 mm) package. This industrial-grade (-40C to +85C) variant ships on Tape-and-Reel and targets connectivity-intensive embedded designs where deterministic real-time performance and rich peripheral integration are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a wide range of on-chip peripherals such as timers, communication controllers, ADCs, and GPIO onto one silicon die. PIC32MZ devices occupy the high-performance tier of the 32-bit MCU taxonomy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MZ sub-family. The EF variant adds Floating Point Unit (FPU) hardware acceleration, expanded connectivity peripherals, and dedicated crypto-ready alternatives, making the family a strong fit for industrial, automotive, IoT, Graphics/HMI, and motor control market segments. Key features of the PIC32MZ0512EFF100T-I/GJX include the MIPS32 M-Class core with 5-stage pipeline and DSP extensions, hardware FPU (IEEE 754 single/double precision), up to 200 MHz operation, 512 KB Flash, 128 KB SRAM, integrated CAN, USB, Ethernet, HS USB, SQI, and a 12-bit ADC. Memory protection and a peripheral pin-select system simplify design reuse across the family. The 100-pin TFBGA package exposes a wide peripheral set while keeping PCB footprint to 7x7 mm. Typical applications include industrial IoT gateways, motor control (BLDC/PMSM) drives, automotive infotainment and HMI panels, and Ethernet-connected embedded controllers. When designing with this MCU, ensure the supply rail is decoupled per the datasheet's recommended topology and that the trace lengths for high-speed interfaces (HS USB, Ethernet RMII/MII, SQI Flash) follow the reference manual's impedance and length-matching guidance.

Запрос цены Контакты

PIC32MZ0512EFF100T-I/PF

PIC32MZ0512EFF100T-I/PF - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF100T-I/PF is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, integrating up to 200 MHz (330 DMIPS) of compute performance with a hardware Floating Point Unit (FPU) in a 100-pin TQFP (14x14 mm) package. The 'T' suffix denotes tape-and-reel packaging and 'I/PF' indicates the -40C to +85C industrial temperature range with the 100-pin TQFP form factor. The device includes 512 KB of Flash, 128 KB of SRAM, and a rich set of connectivity peripherals such as USB-HS, 10/100 Ethernet MAC, CAN, SQI, and multiple UART/SPI/I2C interfaces. A 32-bit microcontroller (MCU) is an integrated circuit that combines a high-performance processor core, program memory (Flash), data memory (SRAM), and a programmable set of peripherals on a single silicon die. The PIC32MZ EF family targets the MIPS Warrior M-class architecture hierarchy: 32-bit MCU -> embedded processor -> microcontroller -> semiconductor. This category is widely used in connected industrial, IoT, automotive, and HMI/graphics designs that demand deterministic real-time performance combined with rich connectivity. Key features of the PIC32MZ0512EFF100T-I/PF include a MIPS32 M-class DSP-enhanced core with four 64-bit accumulators, single-cycle MAC, saturating and fractional math, and an IEEE 754-compliant FPU. The device provides Dual Panel Flash for live firmware updates, hardware crypto acceleration on the EFF variant, and a 12-bit 18-channel ADC with up to 500 ksps throughput. Compared with Cortex-M3/M4 competitors, the PIC32MZ EF delivers comparable Dhrystone performance while offering the integrated connectivity and DSP extensions that simplify multi-protocol industrial nodes. Typical applications include industrial Ethernet gateways, motor-control inverters, automotive body and infotainment controllers, IoT edge devices with TLS/security requirements, and high-resolution HMI touch panels. The combination of on-chip FPU, Ethernet MAC, USB-HS PHY interface, and crypto engine allows engineers to consolidate what would normally be a multi-chip solution onto a single MCU. When designing with this part, ensure that the PCB layout follows Microchip application note recommendations for the 100-pin TQFP power and ground pin arrangement to achieve the rated EMC and thermal performance.

Запрос цены Контакты

PIC32MZ0512EFF100T-I/PT

PIC32MZ0512EFF100T-I/PT - 200MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MZ0512EFF100T-I/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, delivering 200 MHz / 330 DMIPS from a MIPS Warrior M-class core in a 100-pin TQFP (12x12 mm) package. The part integrates 512 KB of dual-panel Flash with live-update support and 128 KB of SRAM, while the T-suffix suffix denotes tape-and-reel packaging and the I-suffix indicates the industrial -40C to +85C temperature grade. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and a rich peripheral set on one die. The MIPS32 M-class core adds a hardware Floating Point Unit (FPU) and DSP extensions (single-cycle MAC, four 64-bit accumulators, IEEE 754 compliance) so engineers can run signal-processing math without software emulation. Within Microchip's taxonomy, the PIC32MZ EF family sits at the top of the PIC32 lineup, targeting connectivity-heavy applications such as industrial Ethernet, USB, CAN, and graphical HMI. Key features of this part include IEEE 754-compliant FPU, dual-panel Flash allowing live field firmware updates, four 64-bit accumulators, single-cycle MAC, saturating and fractional math, and zero-wait-state Flash execution at full 200 MHz. The integrated connectivity block adds USB-HS, 10/100 Ethernet MAC, CAN, SQI (Serial Quad Interface) for external Flash, and multiple UART/SPI/I2C instances, eliminating the need for an external connectivity companion IC. Architecturally, the PIC32MZ EF uses a 5-stage MIPS Warrior pipeline with branch prediction and a tightly-coupled FPU pipeline, achieving 1.65 DMIPS/MHz. The dual-panel Flash architecture splits program memory into two independently erasable banks, so a firmware update can be programmed into the inactive bank while the active bank keeps running - critical for industrial systems that cannot tolerate brownout-during-update failures. Typical applications include industrial Ethernet PLCs, motor control (FOC) drives, USB host/device peripherals, graphical HMI touch panels, IoT gateways with secure boot, and automotive connectivity modules. The 200 MHz core with FPU also suits digital signal processing tasks such as audio codecs, sensor fusion, and power-conversion control loops. When designing with this MCU, allocate the dual-panel Flash correctly: bank 1 holds the running firmware, bank 2 holds the staging image. Use the SQI interface for high-throughput external memory and follow the IBIS models for USB-HS signal integrity on the 100-pin TQFP layout.

Запрос цены Контакты

PIC32MZ0512EFF124-E/TL

PIC32MZ0512EFF124-E/TL - 32-bit 180MHz MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF124-E/TL is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, delivering up to 200 MHz / 330 DMIPS performance in a 124-pin VTLA (9x9 mm VFLGA) package with 97 programmable I/O lines. It integrates 512 KB of Flash program memory (with Dual Panel Flash for live-update support) and 128 KB of SRAM, plus a hardware IEEE 754 single/double-precision FPU and a DSP-enhanced core featuring four 64-bit accumulators with single-cycle MAC, saturating, and fractional math. An MCU (microcontroller) is a single-chip computer integrating a CPU core, program and data memory, plus configurable peripherals such as timers, communication interfaces, and analog blocks. The PIC32MZ EF family sits high in the 32-bit MCU hierarchy, above Cortex-M3/M4 class parts in raw MIPS, with on-chip Ethernet MAC, HS USB 2.0, CAN, and advanced analog, making it suitable for connected industrial and HMI designs. Key features of the PIC32MZ0512EFF124-E/TL include 200 MHz maximum core clock (180 MHz at the E temperature grade), 252 MHz for the broader EF family, 512 KB Flash with live-update dual-panel support, 128 KB SRAM, a Crypto engine variant support, and up to 12-bit 18-channel ADC. Communication peripherals include 10/100 Ethernet MAC, HS USB 2.0 with dedicated DMA, CAN 2.0B, multiple UART/SPI/I2C, and an I2S/I2C audio interface. The chip is AEC-Q100 qualified for automotive applications, and the E suffix denotes the -40C to +125C extended operating range. Architecturally, the device uses a 5-stage pipeline MIPS Warrior M-class core with branch prediction and hardware multiply/divide, paired with a tightly-coupled FPU and DSP extensions. The Dual Panel Flash architecture allows a firmware image to be written to one panel while code runs from the other, enabling fail-safe field updates without external memory - critical for connected industrial and IoT deployments. Typical applications include industrial Ethernet gateways and PLC modules, automotive infotainment and HMI, IoT edge nodes with secure firmware update, graphical touch HMI panels, and motor control with high-resolution PWM. The wide peripheral set also suits medical instrumentation and audio processing front-ends. When designing with this MCU, plan PCB layout for the 0.50 mm pitch VTLA package and provide adequate copper thermal relief - despite its high integration, the device still requires proper decoupling and trace impedance for the Ethernet and USB PHYs. Use MPLAB Harmony 3 for peripheral configuration to minimize firmware bring-up time. This page synthesizes live distributor pricing, validated drop-in alternatives within the PIC32MZ EF family, and practical design notes that complement the Microchip datasheet and Family Reference Manual.

Запрос цены Контакты

PIC32MZ0512EFF124-I/TL

PIC32MZ0512EFF124-I/TL - 32-bit MCU 200MHz 512KB Flash | Microchip

The Microchip PIC32MZ0512EFF124-I/TL is a 32-bit MIPS32 M-Class microcontroller operating at 200 MHz with 512 KB Flash and 128 KB SRAM in a 124-pin VTLA (9x9 mm) surface-mount package. It is part of the PIC32MZ EF family targeting high-performance connected applications with up to 97 user I/O pins and full DSP-enhanced core features. The device integrates hardware FPU, dual-panel Flash for live update, and a rich peripheral set including USB-HS, Ethernet, CAN, and SQI. A 32-bit MCU is a microcontroller built around a 32-bit data path and register architecture. Microcontrollers integrate a CPU core, program memory (Flash), data memory (SRAM), and peripherals into a single chip, and they sit at the bottom of the embedded system hierarchy: MCU -> SoC -> embedded computing platform -> IoT/edge device. The PIC32MZ EF family extends the baseline with a floating-point unit, single-cycle MAC DSP extensions, and a deterministic interrupt model, allowing high-performance signal processing and connectivity stacks to run on a single die. Key features include 200 MHz / 330 DMIPS core throughput, IEEE 754-compliant FPU for fast single- and double-precision math, dual-panel Flash supporting live firmware update without downtime, and hardware cryptography acceleration variants. The peripheral set covers USB 2.0 High-Speed (with on-chip PHY), 10/100 Ethernet MAC, CAN, SQI for external memory, multiple UART/SPI/I2C, 12-bit ADC at 500 ksps, and motor-control PWMs. The 124-VTLA package exposes 97 I/O pins for maximum signal access in connected designs. The architecture is based on the MIPS Warrior M-class core with DSP-enhanced extensions (four 64-bit accumulators, single-cycle MAC, saturating and fractional math). This delivers deterministic real-time response under heavy interrupt load, which is essential for industrial control, motor drives, and graphics HMI. The dual-panel Flash enables live update firmware patterns where one panel runs while the other is reprogrammed, eliminating firmware-update downtime. Typical applications include industrial IoT gateways, USB and Ethernet-connected HMI panels, automotive infotainment and body controllers, graphics/HMI with TFT display, and BLDC/PMSM motor control. The combination of FPU, DSP extensions, Ethernet MAC, USB-HS, and CAN makes the device well-suited to Industry 4.0 controllers and connected industrial equipment. When designing with this MCU, ensure the PCB footprint matches the 124-pin VTLA land pattern (0.5 mm pitch recommended for second-source review), provide bulk decoupling on each VDD/VBAT pair, and route the high-speed USB differential lines as a 90-ohm differential pair. The dual-panel Flash feature requires specific linker configuration in MPLAB X and must be enabled at boot for live-update behavior. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not found in the manufacturer datasheet, providing actionable guidance beyond the standard data sheet content.

Запрос цены Контакты

PIC32MZ0512EFF124T-I/TL

PIC32MZ0512EFF124T-I/TL - 200MHz 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ0512EFF124T-I/TL is a high-performance 32-bit microcontroller built around the MIPS32 M-Class Warrior core, running up to 200 MHz with 330 DMIPS performance, packaged in a 124-pin VTLA (9x9 mm) thermally-enhanced surface-mount module. The device integrates 512 KB of Flash program memory, 128 KB of SRAM, and a rich connectivity peripheral set including High-Speed USB, 10/100 Ethernet MAC, CAN 2.0b, SQI, I2S, and multiple UART/SPI/I2C ports, with 97 user I/O pins available. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a processor core, program memory, RAM, and a wide mix of analog and digital peripherals. Within the embedded hierarchy it sits between microprocessors (which require external RAM/Flash) and application-specific SoCs. The PIC32MZ EF family specifically targets high-end connectivity and graphics (HMI) applications by combining a MIPS Warrior M-class core with an IEEE 754 single-precision Floating Point Unit (FPU), four 64-bit accumulators for single-cycle MAC DSP operations, and dual-panel Flash to support live firmware updates without service interruption. Key features include 200 MHz core operation with hardware multiply/divide, dual-panel Flash allowing A/B image live update, 12-bit ADC up to 18 MSPS with up to 40 analog inputs, 9 compare/PWM outputs, a graphics-friendly parallel master port, and a crypto engine (when available in the family). Industrial-grade operating temperature of -40C to +85C is implied by the "-I" temperature designator. The 124-VTLA package exposes extensive connectivity with minimal external glue components. Typical applications for the PIC32MZ0512EFF124T-I/TL include industrial Ethernet gateways, building automation controllers, automotive infotainment/HMI panels, USB host/device embedded products, motor-control FOCs, and graphical touch HMI terminals. The combination of high-speed USB, Ethernet, CAN, and a 200 MHz core makes it especially attractive for protocols requiring deterministic real-time performance alongside rich connectivity. Design considerations include careful VTLA PCB thermal layout (the exposed die pad must be soldered to a sufficiently large copper pour for heat removal), trace matching for high-speed USB and Ethernet differential pairs, and JTAG/ICSP trace routing for the PGECx/PGEDx pairs. Developers should also plan dual-panel Flash partitioning to fully leverage the live-update capability. This page synthesizes distributor pricing, drop-in PIC32MZ EF family alternatives, and practical design notes that extend the manufacturer datasheet with board-level engineering guidance.

Запрос цены Контакты

PIC32MZ0512EFF144-E/JWX

PIC32MZ0512EFF144-E/JWX - 252MHz MCU 512KB Flash | Microchip

The Microchip PIC32MZ0512EFF144-E/JWX is a high-performance 32-bit MIPS Warrior M-class microcontroller running up to 252 MHz with 512 KB Flash and 128 KB SRAM in a 144-pin TFBGA (7x7 mm) package. Part of the PIC32MZ EF family, it integrates an IEEE 754-compliant FPU, dual-panel Flash for live update support, DSP-enhanced core with four 64-bit accumulators, and a rich peripheral set including CAN, USB, Ethernet, and six UART/I2C/SPI ports. A microcontroller (MCU) is an integrated circuit containing a CPU core, program memory, data memory, and on-chip peripherals designed for embedded control applications. The PIC32MZ EF family is positioned within Microchip's MIPS-based 32-bit MCU hierarchy, between the lower-tier PIC32MX series and the higher-end SAM E70/S70 ARM Cortex-M7 families. Its DSP extensions and FPU place it in the high-performance embedded computing segment, suitable for applications requiring signal processing combined with connectivity. Key features of the PIC32MZ0512EFF144-E/JWX include 200 MHz/330 DMIPS core performance, IEEE 754-compliant single-precision FPU, dual-panel Flash architecture enabling live firmware updates without downtime, and a 200 MHz peripheral bus with dedicated DMA channels. The device operates from 2.2V to 3.6V and is AEC-Q100 qualified for automotive applications. With 120 GPIO pins and a wide peripheral mix, it targets Industrial, IoT, automotive, graphics/HMI, and motor control market segments. The PIC32MZ EF architecture uses a 5-stage pipeline MIPS32 microAptiv core with hardware multiply/divide and DSP ASE for single-cycle MAC operations. Its dual-panel Flash (512 KB total split into two 256 KB panels) allows simultaneous read from one panel while writing to the other, enabling robust OTA firmware upgrades. The integrated crypto accelerator (absent in this "F" variant; present in "H" variants) and true random number generator support secure boot applications where present. Typical applications include industrial HMI displays, automotive body and gateway modules, IoT edge nodes, motor control drives, and audio processing systems. The 144-TFBGA package and AEC-Q100 qualification make it suitable for space-constrained automotive designs. Designers should verify pin compatibility within the PIC32MZ EF family (144-pin TFBGA footprint is shared with PIC32MZ1024EFF144 and PIC32MZ0512EFE144 variants) when planning multi-sourcing. When designing with this MCU, allocate sufficient decoupling (typically 100 nF per VDD pin plus bulk capacitors) and follow Microchip's recommended PCB layout for TFBGA packages, including via-in-pad for the thermal pad. The dual-panel Flash requires firmware to be split correctly between panels for live update operation. This page synthesizes distributor pricing, drop-in same-package alternatives (PIC32MZ1024EFF144, PIC32MZ0512EFE144), and practical design notes not found in the standalone manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFF144-E/PH

PIC32MZ0512EFF144-E/PH - 200MHz 512KB FPU MCU | Microchip

The Microchip PIC32MZ0512EFF144-E/PH is a 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS Warrior M-class core running up to 200 MHz with 330 DMIPS performance, 512 KB Flash, and 128 KB SRAM in a 144-pin TQFP (16x16 mm) package. The integrated IEEE 754-compliant Floating Point Unit (FPU) accelerates single- and double-precision math, while the DSP-enhanced core adds four 64-bit accumulators, single-cycle MAC, saturating arithmetic, and fractional math support. An MCU (microcontroller unit) is a single-chip computer integrating a CPU core, program memory, data RAM, and peripheral set; the PIC32MZ EF family specifically targets high-performance connected embedded applications. Within the broader taxonomy, this part sits as MCU -> 32-bit MCU -> ARM/MIPS application processor class -> embedded computing, and forms the PIC32MZ EF sub-family in Microchip's portfolio. The "E" suffix denotes the -40C to +125C extended temperature grade for industrial and automotive use, while the trailing "/PH" indicates the 144-TQFP pin-out. Key features include Dual Panel Flash for live firmware update support without downtime, 8-channel DMA, two 12-bit ADC modules (up to 48 analog inputs), dedicated audio data path with I2S/SPDIF interface, Hi-Speed USB 2.0 OTG, two CAN 2.0B controllers, Ethernet MAC (MII/RMII), HS/FS/LS timer, and 144 general-purpose I/O. The architecture supports live update (run-time firmware swap), 32-bit prefetch cache, and tightly-coupled SRAM for deterministic response. Typical applications include industrial connectivity gateways, automotive instrument clusters, IoT edge nodes, HMI graphics with resistive/PCT touch, motor control FOC drives, and audio processing subsystems. When designing with the part, plan a 4-layer PCB stack-up and provision separate analog/digital ground regions to keep ADC SNR high; the FPU and DSP extensions should be enabled via the device configuration bits to fully realize the 330 DMIPS throughput.

Запрос цены Контакты

PIC32MZ0512EFF144-E/PL

PIC32MZ0512EFF144-E/PL - 200MHz 512KB Flash MCU | Microchip

The Microchip PIC32MZ0512EFF144-E/PL is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class Warrior core running up to 200 MHz with 330 DMIPS, 512 KB of Flash and 128 KB of SRAM, housed in a 144-pin LQFP package (20x20 mm). The 'E' temperature grade supports an extended industrial range of -40C to +125C, making it suitable for harsh-environment and AEC-Q100 qualified designs. This device sits within the microcontroller (MCU) category — an integrated circuit containing a CPU core, memory, and peripherals on a single die. Within that hierarchy, the PIC32MZ EF family belongs to high-performance 32-bit MCUs, which sit above 16-bit MCUs and below microprocessors in system capability. The FPU (Floating Point Unit) and DSP extensions place it firmly in the signal-processing tier of 32-bit MCUs, enabling single-cycle MAC, four 64-bit accumulators, saturating and fractional math, and IEEE 754-compliant floating-point operations. Key features include a 200 MHz core, 512 KB dual-panel Flash supporting live update for field firmware upgrades without downtime, 128 KB SRAM with 16 KB of I-cache and 16 KB of D-cache, USB 2.0 High-Speed OTG with dedicated DMA, integrated 10/100 Mbps Ethernet MAC with 1588 timestamping hardware, dual CAN 2.0b modules, SQI (Serial Quad Interface) for external Flash, a 12-bit 5 Msps ADC with up to 48 channels, and a 32-bit RTCC. The device also includes an 8-channel DMA, six UART, six SPI, four I2C ports, and up to 120 general-purpose I/O pins. Architecturally, the PIC32MZ EF core is a superset of the MIPS M14Kc architecture with microMIPS compressed instruction support, DSP ASE, and an FPU. Dual-panel Flash allows one panel to be reprogrammed while code executes from the other — critical for safety-certified industrial and automotive firmware where downtime is unacceptable. Hardware crypto accelerators are not present on this 'EFF' variant (vs the 'EFE' variant). Typical applications include industrial IoT gateways, HMI / graphics controllers, motor control (BLDC, PMSM, FOC), automotive body and chassis ECUs, Ethernet-connected PLCs, USB peripherals and embedded hosts, and medical instrumentation. The wide peripheral set replaces several external ICs on the board. When designing with this part, allocate 6-8 layers of PCB for the 144-pin LQFP fan-out and route the high-speed USB and Ethernet differential pairs with 90-ohm differential impedance. Decouple VDD with 100 nF ceramic at every supply pin plus a 4.7 uF bulk near the regulator. This page synthesizes distributor pricing, qualified drop-in alternatives from Microchip's own portfolio, and practical layout guidance beyond the datasheet pin tables.

Запрос цены Контакты

PIC32MZ0512EFF144-I/PH

PIC32MZ0512EFF144-I/PH - 32-bit MIPS MCU 200MHz 512KB Flash TQFP-144

The Microchip Technology PIC32MZ0512EFF144-I/PH is a 32-bit MIPS M-Class PIC32MZ microcontroller running up to 200 MHz, integrating 512 KB Flash and 128 KB SRAM in a 144-pin TQFP (16x16 mm) package, designed for industrial, IoT, graphics HMI, motor control, and automotive connectivity applications. This MCU belongs to the PIC32MZ EF family, which combines a high-performance MIPS microAptiv core with rich connectivity peripherals including Ethernet, USB, CAN, and multiple serial interfaces. Per the Microchip product page, the family supports 252 MHz operation and up to 2 MB Flash with 512 KB SRAM, but this specific variant is the 512 KB Flash, 128 KB SRAM, non-crypto industrial-grade member in the 144-pin TQFP. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU core, program memory (Flash), data memory (SRAM), and a rich set of on-chip peripherals such as ADCs, timers, communication controllers, and GPIO. Within the embedded device taxonomy, an MCU belongs to the semiconductor > integrated circuit > microprocessor hierarchy and is the system-on-chip of choice for deeply embedded, deterministic applications where a high-level operating system is not required. The PIC32MZ EF family targets the upper end of performance for MCU-class devices, bridging the gap between classic microcontrollers and application-class processors. Key features of the PIC32MZ0512EFF144-I/PH include 200 MHz maximum CPU clock, 512 KB Flash program memory, 128 KB SRAM, integrated FPU, multiple connectivity peripherals (Ethernet MAC, USB 2.0 OTG, CAN, I2C, SPI, UART), up to 53-channel 12-bit ADC, and an operating temperature range of -40C to +85C (industrial grade). The 144-pin TQFP package provides abundant I/O for graphics, motor control, and parallel display interfacing. The architecture uses a MIPS32 microAptiv M-Class core with hardware multiply/divide and an FPU, supporting DSP-style operations. The bus matrix provides high-bandwidth access between the CPU, DMA, and peripherals, and the integrated DMA controller offloads data movement from the CPU for efficient throughput in audio, graphics, and communication pipelines. Typical applications include industrial control and HMI panels, IoT edge gateways, motor control drives (BLDC, PMSM, stepper), graphic displays with integrated TFT controllers, automotive connectivity modules, and high-performance sensor fusion. The 200 MHz flexibility of the device allows high-speed digital signal processing and protocol handling in real time. When designing with the PIC32MZ0512EFF144-I/PH, ensure proper 3.3V power decoupling near the VDD pins and route analog/digital grounds carefully to avoid ADC noise. The 144-pin TQFP requires a 4-layer PCB with adequate thermal vias under the exposed die pad for high-current applications. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet, including the EF vs E variant distinction and the I/PH industrial temperature/package code.

Запрос цены Контакты

PIC32MZ0512EFF144-I/PL

PIC32MZ0512EFF144-I/PL - 200MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MZ0512EFF144-I/PL is a 32-bit MIPS32 M-Class PIC32MZ microcontroller running up to 200 MHz, integrating 512 KB Flash and 128 KB SRAM in a 144-pin LQFP (PL) package. The MIPS Warrior M-class core delivers 330 DMIPS with a single-cycle hardware MAC, four 64-bit accumulators, IEEE 754-compliant FPU, and DSP-enhanced saturating/fractional math, targeting high-throughput connected-embedded designs. What is a PIC32MZ EF microcontroller? The PIC32MZ EF family is Microchip's premium connectivity line of 32-bit MIPS microcontrollers, sitting in the broader hierarchy of MCU -> 32-bit MCU -> MIPS architecture -> embedded connectivity family. EF parts add Floating-Point Unit (FPU) capability, dual-panel Flash for live-update field firmware upgrades, dedicated crypto accelerators, and high-speed peripherals including USB 2.0 High-Speed, Ethernet, CAN, and SQI — bridging general-purpose MCUs and application processors in the connected-device market. Key features of the PIC32MZ0512EFF144-I/PL include 200 MHz / 330 DMIPS performance, 512 KB Flash with dual-panel live update, 128 KB SRAM, full-speed USB 2.0 with dedicated DMA, 10/100 Mbps Ethernet MAC, two CAN 2.0b controllers, a 12-bit 18 Msps ADC with up to 48 channels, and four I2C/SPI/I2S ports. The integrated FPU accelerates single- and double-precision IEEE 754 math, while the crypto engine provides hardware AES, DES, 3DES, SHA, MD5, and HMAC acceleration. Architecturally, the chip pairs a 16 KB I-cache and 4 KB D-cache with a tightly-coupled prefetch buffer to hide Flash latency at 200 MHz, and includes a 16-channel DMA controller for peripheral offload. The on-chip 12-bit 18 Msps ADC with up to 48 channels supports high-speed analog sampling for motor-control and power-conversion feedback loops, and the dedicated crypto/hash engine offloads TLS handshakes. Typical applications include industrial IoT gateways, automotive infotainment and body controllers, HMI/graphics terminals (with the optional EBI driving a TFT-LCD), motor-control BLDC/PMSM drives, and connected medical devices. The 144-LQFP footprint with rich connectivity (HS-USB, ENET, CAN, SQI) makes it a single-chip solution for protocol-rich nodes that previously required an external processor plus connectivity SoC. Design trade-off: the 200 MHz / 1.6 DMIPS/MHz core dissipates noticeably more power than the lower-tier PIC32MX parts — derate junction temperature carefully when sealed enclosures are used, and prefer the -E/PL temperature-grade variant for -40C to +125C operation rather than the I/PL industrial -40C to +85C part if you need extended thermal margin. This page synthesizes distributor pricing, verified drop-in alternatives from the same PIC32MZ EF family, and practical design notes not found in the standalone manufacturer datasheet.

Запрос цены Контакты

PIC32MZ0512EFF144T-I/JWX

PIC32MZ0512EFF144T-I/JWX - 200MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MZ0512EFF144T-I/JWX is a 32-bit MIPS32 M-Class PIC microcontroller running up to 200 MHz, integrating 512 KB Flash and 128 KB SRAM in a 144-pin TFBGA (7x7 mm) package. As a member of the PIC32MZ EF family, it targets connectivity, industrial, IoT, graphics/HMI, and motor control applications with a rich peripheral set including CAN, USB, and high-speed communication interfaces. A 32-bit microcontroller (MCU) is an integrated circuit that combines a CPU core, program Flash, data RAM, and configurable peripherals on a single die. The PIC32MZ family represents Microchip's high-performance tier built on the MIPS32 M-Class architecture, with cache, MMU, and DSP extensions enabling 252 MHz-class throughput while remaining code-compatible with earlier PIC32 designs. Key features include a 200 MHz maximum CPU speed, 512 KB program Flash, 128 KB SRAM, a 12-bit ADC, multiple UART/SPI/I2C interfaces, CAN, USB, and a hardware crypto/security accelerator absent on this specific variant (no Crypto). AEC-Q100 qualification makes the device suitable for automotive-grade applications, while the wide operating temperature range supports industrial and consumer designs. Architecturally, the part uses a 5-stage pipeline MIPS core with separate I/D caches, FPU, and a tightly-coupled peripheral bus. The 144-pin TFBGA package exposes a high pin count for parallel buses and many simultaneous peripheral connections; the T suffix indicates Tape & Reel packaging. Typical applications include industrial HMI panels with graphics, automotive body controllers, IoT edge nodes with connectivity, motor control inverters, and medical instrumentation. The 200 MHz speed and 512 KB Flash combination is well-suited to GUI stacks and protocol conversion. Designers should pay attention to decoupling and trace impedance on the TFBGA package, which has a 0.5 mm pitch requiring careful PCB layout. Always check errata documents for the specific silicon revision before finalizing firmware.

Запрос цены Контакты

PIC32MZ0512EFF144T-I/PH

PIC32MZ0512EFF144T-I/PH - 200MHz 512KB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ0512EFF144T-I/PH is a high-performance 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, running up to 200 MHz with 512 KB Flash and 128 KB SRAM, housed in a 144-pin TQFP (16x16 mm) package. It targets connectivity-intensive applications including industrial control, automotive, IoT, graphics/HMI, and motor control market segments, and integrates high-speed USB, Ethernet, CAN, and a Serial Quad Interface (SQI) for external memory expansion. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. The PIC32MZ EF family in particular sits in the high-performance tier of the PIC32 family tree: PIC32MX (lower-cost, 80 MHz) -> PIC32MZ EF (200 MHz, FPU, connectivity peripherals) -> PIC32MZ Harmony family, and within Microchip's portfolio it is grouped under 32-bit microcontrollers -> microcontrollers -> embedded ICs. The 'M-Class' MIPS core adds single-precision hardware FPU and DSP extensions, enabling signal-processing and floating-point workloads at deterministic cycle counts. Key features include 512 KB Flash, 128 KB SRAM, an FPU and DSP extensions on the MIPS32 core, integrated 10/100 Ethernet MAC with IEEE 1588 support, USB 2.0 High-Speed OTG, dual CAN 2.0b controllers, a 12-bit 18 MSPS ADC, multiple UART/SPI/I2C peripherals, a 16-bit parallel master port (PMP) for graphics, and a 4-wire SQI interface for external serial memory. The device operates from 2.3V to 3.6V across an industrial temperature range of -40 C to +85 C. The architecture pairs the MIPS M-Class core with a multi-channel DMA controller and a 9-stage pipeline, giving the part headroom for high-bandwidth TCP/IP stacks, FreeRTOS or Harmony TCP/IP, and simultaneous motor control loops. The on-chip crypto accelerator is omitted in this 'EF' (no-Crypto) variant, distinguishing it from the 'EFE' parts. Typical applications include industrial IoT edge nodes with Ethernet, automotive HMI clusters, brushless DC motor control FOC firmware, graphic LCD or TFT display controllers, and connected sensor hubs. The wide peripheral set reduces external component count. When designing with this part, budget flash for both application code and a TCP/IP stack (e.g., Net), reserve SQI for an external QSPI flash memory used for OTA updates, and isolate analog/digital grounds with a ferrite. The 'T' suffix indicates Tape & Reel packaging and the 'I' is the industrial temperature grade. This page synthesizes distributor pricing, drop-in pinout/pair-step alternatives from the same family, and design notes compiled from Microchip application notes and datasheet Family - it is information gain beyond the manufacturer datasheet itself.

Запрос цены Контакты

Подкатегории

Товары (32784)

PIC32MZ0512EFE144T-I/PL - 200MHz 512KB Flash MCU | Microchip

PIC32MZ0512EFF064-E/MR - 200MHz 32-bit MCU 512KB Flash | Microchip

PIC32MZ0512EFF064-E/PT - 32-bit MIPS 180MHz MCU, 512KB Flash | Microchip

PIC32MZ0512EFF064-I/PT - 200MHz 32-bit MCU 512KB Flash | Microchip

PIC32MZ0512EFF064T-I/MR - 200MHz 32-bit MCU, 512KB Flash | Microchip

PIC32MZ0512EFF064T-I/PT - 200MHz 512KB Flash 32-bit MCU | Microchip

PIC32MZ0512EFF100-E/GJX - 200MHz 512KB Flash MCU | Microchip

PIC32MZ0512EFF100-E/PT - 200MHz MCU 512KB Flash TQFP-100 | Microchip

PIC32MZ0512EFF100-I/GJX - 200MHz 32-bit MCU 512KB Flash | Microchip

PIC32MZ0512EFF100-I/PF - 200MHz MCU, 512KB Flash, TQFP-100 | Microchip

PIC32MZ0512EFF100T-E/GJX - 200MHz 32-bit MCU 512KB Flash | Microchip

PIC32MZ0512EFF100T-I/GJX - 200MHz 512KB Flash MCU | Microchip

PIC32MZ0512EFF100T-I/PF - 200MHz 32-bit MCU 512KB Flash | Microchip

PIC32MZ0512EFF100T-I/PT - 200MHz 512KB Flash MCU | Microchip

PIC32MZ0512EFF124-E/TL - 32-bit 180MHz MCU, 512KB Flash | Microchip

PIC32MZ0512EFF124-I/TL - 32-bit MCU 200MHz 512KB Flash | Microchip

PIC32MZ0512EFF124T-I/TL - 200MHz 512KB Flash 32-bit MCU | Microchip

PIC32MZ0512EFF144-E/JWX - 252MHz MCU 512KB Flash | Microchip

PIC32MZ0512EFF144-E/PH - 200MHz 512KB FPU MCU | Microchip

PIC32MZ0512EFF144-E/PL - 200MHz 512KB Flash MCU | Microchip

PIC32MZ0512EFF144-I/PH - 32-bit MIPS MCU 200MHz 512KB Flash TQFP-144

PIC32MZ0512EFF144-I/PL - 200MHz 32-bit MCU 512KB Flash | Microchip

PIC32MZ0512EFF144T-I/JWX - 200MHz 512KB Flash MCU | Microchip

PIC32MZ0512EFF144T-I/PH - 200MHz 512KB Flash 32-bit MCU | Microchip