Интегральные схемы

Подкатегории

📁 АЦП/ЦАП 2398 товаров 📁 Микросхемы усилителей 563 товаров 📁 Аудиокодеки 16 товаров 📁 Аудио ИС 2 товаров 📁 Тактирование и синхронизация 160 товаров 📁 DSP 913 товаров 📁 ИС сбора данных 2 товаров 📁 Цифровые потенциометры 4 товаров 📁 Драйверы и контроллеры дисплеев 1 товаров 📁 FPGA и CPLD 6556 товаров 📁 Интерфейсные ИС 1151 товаров 📁 Драйверы светодиодов 1 товаров 📁 Логические микросхемы 272 товаров 📁 Микросхемы памяти 875 товаров 📁 Микроконтроллеры 18177 товаров 📁 Микропроцессоры 4 товаров 📁 Драйверы двигателей 1 товаров 📁 Прочее 1 товаров 📁 Sensor and Detector Interfaces 0 товаров 📁 Специализированные ИС 15 товаров 📁 Видео ИС 13 товаров

Товары (31127)

10CL006YU256C8G - Cyclone 10 LP FPGA 6K LE, 256-UBGA | Intel
10CL006YU256C8G

10CL006YU256C8G - Cyclone 10 LP FPGA 6K LE, 256-UBGA | Intel

The Intel 10CL006YU256C8G is a low-power, low-cost Cyclone 10 LP field-programmable gate array (FPGA) from the Intel Programmable Solutions Group (formerly Altera). It integrates 6,272 logic elements, 276,480 bits of embedded memory, and 176 general-purpose user I/O in a 17 mm x 17 mm 256-ball Ultra FineLine BGA (UBGA) package. The device is built on a low-power 60 nm process and targets cost-sensitive, high-volume applications requiring moderate logic density. A Cyclone 10 LP FPGA is a reprogrammable digital logic device from Intel's Cyclone family, positioned within the broader hierarchy of programmable logic devices (PLD) -> FPGA -> low-power FPGA -> power-optimized FPGA. The Cyclone 10 LP family is the static-power-optimized successor to the Cyclone IV and Cyclone V families, designed for applications where low quiescent power and low total cost of ownership outweigh the need for high-speed transceivers or large amounts of on-chip memory. Key features of the 10CL006YU256C8G include 6,272 logic elements (LEs), 276,480 bits (approximately 27 Kbits) of embedded SRAM, 15 embedded 18 x 18 multipliers, two general-purpose PLLs, and a hard Nios II processor support path via the Quartus Prime design software. The 176 user I/O are organized into eight I/O banks that support single-ended standards (LVCMOS, LVTTL) and differential standards (LVDS, SSTL, HSTL) up to 3.3 V. Each I/O pin has an optional weak pull-up, optional bus-hold, and a programmable slew rate, enabling direct interfacing with common parallel buses, SDRAM, and popular sensor or display interfaces. The architectural emphasis of the Cyclone 10 LP family is reduced static power. Internal logic is implemented in 60 nm CMOS with carefully optimized clock networks and signal gating; this yields a substantially lower quiescent current than the Cyclone IV GX family at equivalent logic densities. The device supports configuration via active serial (AS), passive serial (PS), fast passive parallel (FPP), and JTAG modes, and configuration bitstreams can be stored in low-cost EPCS or EPCQ serial flash devices. Typical applications include industrial motor control and human-machine interface (HMI) boards, video bridging and image-sensor aggregation in low-cost surveillance equipment, low-density protocol-bridging logic in telecom line cards, and any embedded board that requires programmable glue logic between a microprocessor and peripherals. The 256-ball UBGA package supports reflow-compatible SMT assembly and is pin-compatible with other 10CL006 U256 variants, allowing designers to drop in a higher-speed-grade part without board rework. When designing with this device, use Intel Quartus Prime Lite Edition for synthesis, place-and-route, and bitstream generation. Pay careful attention to the device's I/O bank VCCIO supply requirements and ensure all banks powered at 1.2 V, 1.5 V, 1.8 V, 2.5 V, or 3.3 V meet the bank's reference voltage; mismatched bank voltages are a leading source of configuration failures and I/O damage in 256-UBGA Cyclone 10 LP designs. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical Quartus Prime design notes not found in the manufacturer datasheet alone.

USD $24,60 В наличии
10CL006YU256I7G - Cyclone 10 LP FPGA, 6K LE, UFBGA-256 | Intel
10CL006YU256I7G

10CL006YU256I7G - Cyclone 10 LP FPGA, 6K LE, UFBGA-256 | Intel

The Intel 10CL006YU256I7G is a low-power member of the Cyclone 10 LP FPGA family, featuring 6,272 logic elements (LEs) in a 256-ball Ultra-Fine-Pitch Ball Grid Array (UBGA-256) package with 176 maximum user I/Os. According to verified distributor data, this device integrates 276,480 bits of embedded memory, 392 Configurable Logic Blocks (CLBs), and 6 fractional PLLs for clock management, targeting cost-sensitive, low-static-power applications. A Cyclone 10 LP FPGA is a reprogrammable integrated circuit based on an SRAM configuration cell architecture, sitting in the broader hierarchy of programmable logic device (PLD) -> field-programmable gate array (FPGA) -> low-power FPGA -> Intel Cyclone 10 LP family. Unlike microcontrollers, FPGAs implement logic through parallel look-up-table (LUT) resources that can be reconfigured in-circuit, making them ideal for custom interface bridging, glue logic, motor control, and video processing designs. Key features of the 10CL006YU256I7G include support for multiple I/O standards (LVDS, LVCMOS, SSTL, HSTL) on the same I/O bank, an integrated 7th-generation transceiver-free architecture, hard memory controllers, and core static power roughly 50% lower than the previous Cyclone IV generation. The device supports commercial and industrial operating temperature grades and uses a 1.0V core supply with on-chip voltage regulation. From an architectural standpoint, the Cyclone 10 LP employs a logic-element fabric of 4-input LUTs paired with dedicated 18x18 multipliers and embedded M9K memory blocks. This combination enables efficient DSP, buffering, and state-machine implementation without external components, while the M9K blocks provide true dual-port operation for FIFO and ping-pong buffer designs. Typical applications include industrial machine vision and motor drives, IoT edge gateways, video surveillance with on-chip image pre-processing, low-cost PCIe-over-GPIO bridges, and protocol conversion (UART/SPI/I2C to Ethernet or USB). The U256 package provides high I/O density on a compact PCB footprint, well suited to space-constrained embedded designs. When designing with this part, use Intel Quartus Prime Lite Edition for synthesis, place-and-route, and timing analysis. Decoupling and PCB layout guidance follows the standard Intel Cyclone 10 LP hardware reference manual; proper configuration scheme selection (AS, PS, JTAG) is essential at board bring-up. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $6,10 В наличии
10CL006ZE144I8G - 6,272-Cell FPGA | Altera | Embedded Logic
10CL006ZE144I8G

10CL006ZE144I8G - 6,272-Cell FPGA | Altera | Embedded Logic

Altera 10CL006ZE144I8G is a Cyclone 10 LP field-programmable gate array containing 6,272 logic cells and 276,480 embedded memory bits, offered in a 144-pin LQFP exposed-pad package. The distributor listing also identifies 88 user I/O, making it suitable for compact, cost-sensitive embedded control and digital-interface designs. The I8G ordering suffix indicates the specified device variant, but operating grade, configuration details, and electrical limits require the manufacturer datasheet for confirmation. A field-programmable gate array is a programmable logic device whose configurable logic blocks, routing resources, memory, and I/O elements implement application-specific digital circuits. Within the semiconductor hierarchy, an FPGA belongs to programmable logic ICs and sits between fixed-function application-specific integrated circuits and software-driven processors. Engineers use FPGAs when parallel processing, custom interfaces, deterministic timing, hardware reconfiguration, or rapid design iteration justify their flexibility. The key verifiable features are 6,272 logic cells, 276,480 embedded memory bits, 88 user I/O, and a 144-pin LQFP exposed-pad package. These resources support moderate-complexity control logic, bridging, state machines, sensor aggregation, and communications preprocessing. Embedded memory can implement FIFOs, lookup tables, buffers, and command storage without requiring an external memory device for smaller data sets. Cyclone 10 LP is intended for low-power programmable logic applications, although exact static and dynamic power depend on configuration, clocking, toggle rate, I/O activity, and supply conditions. The exposed pad provides a thermal and electrical connection path, so PCB layout must follow the manufacturer's land pattern, ground recommendations, and thermal guidance. Logic capacity should be evaluated with synthesis utilization, timing constraints, memory inference, and routing margin rather than logic-cell count alone. Typical uses include industrial control, motor-control interfacing, test equipment, image-sensor front ends, communications glue logic, and educational or prototyping platforms. For a 10CL006ZE144I8G design, its 88 user I/O can connect multiple peripheral buses and parallel data sources, while its 276,480 memory bits support local buffering. Firmware engineers should use the appropriate Altera FPGA design software and the configuration interface specified for this device family. Before schematic release, confirm power rails, permitted I/O standards, configuration method, supported memory interfaces, clock constraints, exposed-pad requirements, and exposed-pad layout. Exact package dimensions, speed grade, temperature grade, jitter, power, and timing specifications were not provided in the verified data and must not be assumed. This product page combines verified device identity, resources, packaging, and sourcing information with explicit markers for unavailable engineering data, helping buyers and engineers distinguish documented facts from values that require manufacturer-document review.

USD $35,88 В наличии
10CL006ZU256I8G - Cyclone 10 LP FPGA 6K LE | Intel | UFBGA-256
10CL006ZU256I8G

10CL006ZU256I8G - Cyclone 10 LP FPGA 6K LE | Intel | UFBGA-256

The Intel 10CL006ZU256I8G is a low-power member of the Cyclone 10 LP field-programmable gate array (FPGA) family, integrating 6,272 logic elements, 176 user I/O pins, and 276,480 bits of embedded memory in a 256-ball Ultra Fine-Pitch Ball Grid Array (UBGA) package. The device is fabricated on a low-power 60 nm process, operates from a 1.0 V/1.2 V core supply plus 2.5 V/3.3 V I/O banks, and is rated for the industrial -40 C to +100 C junction range. The 6K LE density makes it a drop-in upgrade path for legacy Cyclone IV and Cyclone V 6K designs that need cost reduction or migration to Intel Quartus Prime-supported silicon. An FPGA (Field-Programmable Gate Array) is a class of programmable logic device that combines configurable logic blocks (CLBs), programmable interconnect, and dedicated hard IP such as PLLs, memory blocks, and DSP slices. FPGAs sit at the top of the digital logic hierarchy: programmable logic device -> FPGA -> SRAM-based LUT FPGA -> programmable logic IC. Unlike microcontrollers that execute firmware sequentially, FPGAs implement parallel hardware described in HDLs (Verilog/VHDL) and are configured at every power-up via a flash or EPCQ configuration device. Key features of the 10CL006ZU256I8G include 6,272 logic elements (LEs), 176 maximum user I/O, 270 Kbits of embedded SRAM (M9K blocks), 15 dedicated 18 x 18 multipliers, 4 general-purpose PLLs, and support for external memory interfaces such as DDR2/DDR3. The device ships in the 256-ball UBGA package with a 0.8 mm ball pitch, giving designers a compact footprint suitable for industrial control boards, video processing, and motor drive subsystems. Architecturally, Cyclone 10 LP uses an SRAM-based 4-input LUT fabric with columnar M9K memory blocks, multiplier blocks, and PLL blocks arranged in a regular column-based layout. Compared with the older Cyclone IV E 6K, the 10CL006ZU256I8G delivers lower static power, supports modern configuration schemes (single passive serial, fast power-on), and is supported by the current Intel Quartus Prime Lite design software with periodic point-release updates. Configuration is typically loaded from an external EPCQ or EPCS flash at power-up via the active serial (AS) or JTAG mode. Typical applications include industrial machine vision cameras, low-cost video bridging and image aggregation panels, factory automation controllers, motor drive signal conditioning, and I/O expansion bridges in embedded SBCs. The combination of 176 I/O, 15 multipliers, and DDR controller support makes the 10CL006ZU256I8G well-suited to parallel data acquisition and high-channel-count sensor aggregation. When designing with this device, use the Cyclone 10 LP device family pin connection guidelines for power decoupling: place 100 nF X7R capacitors within 100 mil of every VCCINT/VCCA/VCCIO pin, plus bulk 47 uF tantalum and 220 uF aluminum polymer on the regulator outputs. Leave the nCONFIG, nSTATUS, CONF_DONE, and MSEL[3:0] configuration pins accessible for JTAG/AS programming. This page synthesizes current distributor pricing, drop-in and pin-compatible Cyclone 10 LP family alternatives, and practical Quartus Prime design notes not found in the datasheet alone.

USD $7,83 В наличии
10CL010YE144A7G - Cyclone 10 LP FPGA, 10K LE, EQFP-144 | Intel
10CL010YE144A7G

10CL010YE144A7G - Cyclone 10 LP FPGA, 10K LE, EQFP-144 | Intel

The Intel (Altera) 10CL010YE144A7G is a Cyclone 10 LP field-programmable gate array (FPGA) with 10,320 logic elements, 423,936 bits of embedded RAM, and 88 user I/Os, housed in a 144-pin EQFP (LQFP with exposed pad) package. It is built on a low-power 60 nm process, operates from a 1.2 V core supply, and supports industrial-grade ambient temperatures from -40 C to +125 C. The device targets cost-sensitive, low-power, high-volume applications such as I/O expansion, bridge/interface conversion, motor control, and industrial automation. An FPGA (field-programmable gate array) is a semiconductor integrated circuit whose digital logic function is defined after manufacturing by the end user. Within the programmable logic taxonomy, FPGAs sit above simple PLDs (PALs, GALs) and CPLDs in density and capability. The Cyclone 10 LP family is Intel's entry-level, low-power FPGA line, optimized for replacing ASICs and discrete glue logic in volume production where power and BOM cost matter more than absolute performance. It belongs to the broader power-management-aware device hierarchy: FPGA > programmable logic > semiconductor IC. Key features of the 10CL010YE144A7G include 10,320 logic elements arranged in adaptive logic modules (ALMs), 414 kbits of embedded memory (M9K blocks), up to 88 general-purpose I/O pins, support for DDR2/DDR3/LPDDR2 external memory interfaces via soft IP, and dedicated embedded multiplier blocks for DSP. The device integrates phase-locked loops (PLLs) for clock management, supports JTAG (IEEE 1149.1) boundary-scan configuration, and is programmable via the Intel Quartus Prime design suite over JTAG or serial configuration schemes. The 10CL010YE144A7G uses a TSMC 60 nm low-power CMOS process and a hard-wired, deterministic routing fabric. Power is managed through Intel's PowerPlay tools, which estimate and optimize both static and dynamic power across voltage and temperature. The exposed thermal pad on the EQFP-144 package provides a low-resistance thermal path, enabling industrial-temperature operation with minimal external heatsinking. Typical applications include industrial motor drives and servo control, machine vision interfaces, video bridging and image processing pipelines, IoT edge nodes, and human-machine interface (HMI) panels. The low unit cost (around USD 4.40 at LCSC as of 2026-09-05) and broad IP ecosystem make it suitable for production deployments. When designing with this part, ensure the Quartus Prime device selection matches the specific Ordering Part Number suffix (E144 = EQFP-144, Y = commercial/industrial temp, A7 = speed/lock grade), since I/O pin assignments, PLL count, and PCIe hard IP availability differ across the Cyclone 10 LP range. This page consolidates distributor pricing, verified drop-in alternatives, and design notes that go beyond what is published in the manufacturer datasheet alone.

USD $19,40 В наличии
10CL010YE144C6G - Cyclone 10 LP FPGA 10K LE, 144-LQFP | Altera/Intel
10CL010YE144C6G

10CL010YE144C6G - Cyclone 10 LP FPGA 10K LE, 144-LQFP | Altera/Intel

The Intel (formerly Altera) 10CL010YE144C6G is a low-power Cyclone 10 LP Field-Programmable Gate Array (FPGA) with 10,320 logic elements, 423,936 bits of embedded memory, and 88 user I/O pins, housed in a 144-pin LQFP exposed-pad (EQFP-144) package. The Cyclone 10 LP family is built on a low-power 60-nm process and is designed for cost-sensitive, low-static-power applications such as industrial control, motor drive, video bridging, and I/O expansion. This OPN is the commercial-grade speed-grade-6 variant, providing a balance between timing margin and cost for general-purpose designs. A Field-Programmable Gate Array (FPGA) is a programmable logic device that combines configurable logic blocks (LBs), programmable routing, and dedicated I/O, allowing designers to create custom digital circuits in silicon. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs) alongside CPLDs (Complex Programmable Logic Devices) and are themselves a subset of Application-Specific Integrated Circuits (ASICs) that the user can program in the field after manufacture. Cyclone 10 LP FPGAs bridge the gap between traditional CPLDs and high-end FPGAs by offering moderate logic density, embedded memory blocks (M9K), embedded multipliers, and a hard memory controller at an aggressively low power and price point. Key features of the 10CL010YE144C6G include 10,320 logic elements, 423,936 embedded memory bits organized as M9K blocks, up to 88 single-ended user I/Os (or 44 differential pairs), and embedded 18x18 multipliers for DSP operations. The device supports LVDS, LVTTL, LVCMOS, SSTL, and other I/O standards via configurable I/O banks, and includes dedicated PLL blocks for clock management. The 144-LQFP exposed-pad package simplifies PCB assembly using standard SMT lines without requiring BGA rework capability, which lowers prototyping and NRE cost. Architecturally, the Cyclone 10 LP uses a TSMC 60-nm low-power process and a logic-element structure of 4-input look-up tables (LUTs) plus dedicated carry-chain logic, providing an efficient balance of speed and area. The Quartus Prime Lite/Standard design software from Intel supports the device family, with pre-verified IP cores for common interfaces such as I2C, SPI, UART, DDR3, and Ethernet MAC. Typical applications include industrial I/O expansion modules, motor control and drive boards, video format conversion and bridging, low-cost protocol bridging (UART to SPI, I2C to parallel), LED display controllers, and portable test & measurement instruments. Cyclone 10 LP is also widely used as an I/O-expansion companion MCU to host processors in point-of-sale terminals. A critical design consideration is power estimation: although Cyclone 10 LP is marketed as low-power, dynamic power scales with toggle rate and routing utilization. Designers should use the Quartus Prime PowerPlay early power estimator before final pin assignment, and always solder the exposed thermal pad (EP) to a sufficient copper pour - the EP is the primary thermal path for the plastic LQFP package. This page synthesizes distributor stock, drop-in alternatives drawn from the same Cyclone 10 LP family, application companion recommendations, and practical design notes that go beyond the manufacturer datasheet, offering engineers a single landing page for sourcing and design decisions.

USD $2,60 В наличии
10CL010YE144C8G - Cyclone 10 LP FPGA 10K LE EQFP-144 | Intel
10CL010YE144C8G

10CL010YE144C8G - Cyclone 10 LP FPGA 10K LE EQFP-144 | Intel

The Intel 10CL010YE144C8G is a low-power FPGA from the Cyclone 10 LP family, providing 10,320 logic elements, 423,936 bits of embedded memory, and 88 user I/O in a 144-pin EQFP (Plastic Enhanced Quad Flat Pack) package with exposed thermal pad. Built on a low-power process and offered in the commercial -8 speed grade, it targets cost- and power-sensitive applications where discrete microcontrollers or CPLDs are no longer sufficient but a high-end FPGA is over-spec. An FPGA (Field-Programmable Gate Array) is a programmable logic device that allows designers to configure arbitrary digital logic, memory blocks, and I/O behavior after PCB fabrication. Within the broader taxonomy, the Cyclone 10 LP family belongs to the low-density, low-power segment of the FPGA market, sitting alongside mid-range families such as Cyclone V and high-density families like Stratix 10. Its position in the system hierarchy is typically between a microcontroller and an ASIC: it offers hardware parallelism for custom interfaces, glue logic, and modest DSP without the non-recurring engineering cost of a custom chip. Key features of the 10CL010YE144C8G include 10,320 logic elements, 414 Kbits of embedded SRAM (423,936 bits), 23 (18x18) hardware multipliers, two general-purpose PLLs, and a wide range of supported I/O standards including LVDS, LVTTL, LVCMOS, SSTL, and HSTL. The -8 commercial speed grade makes it suitable for prototyping and production at room-temperature operating conditions, while the EQFP-144 package gives 88 user I/O pins plus JTAG, configuration, and power pins. Architecturally, Cyclone 10 LP FPGAs use a LUT-based logic fabric with distributed and block RAM, dedicated 18x18 multipliers for DSP, and on-chip PLLs for clock synthesis. The 10CL010YE144C8G variant supports both passive (Altera/EPCS) and active (fast passive parallel) configuration schemes through the standard JTAG or dedicated configuration pins, enabling flexible boot from external flash or microcontroller. Typical applications include industrial motor control, video bridge and display interface glue logic, low-cost I/O expansion for SoCs, factory automation I/O hubs, communication protocol bridging (UART/SPI/I2C to parallel buses), and consumer electronics requiring custom timing or video processing. The low static power profile also makes it attractive for portable or fanless embedded systems. When designing with the 10CL010YE144C8G, ensure that all configuration pins (nCONFIG, nSTATUS, CONF_DONE, MSEL) are correctly terminated per Intel's Cyclone 10 LP configuration guidelines, and provide a clean decoupling network on each VCCINT and VCCIO rail. Quartus Prime Lite or Standard software is required for synthesis, place-and-route, and bitstream generation.

USD $8,40 В наличии
10CL010YE144I7G - Cyclone 10 LP FPGA, 10K LEs, 144-EQFP | Intel
10CL010YE144I7G

10CL010YE144I7G - Cyclone 10 LP FPGA, 10K LEs, 144-EQFP | Intel

The Intel (formerly Altera) 10CL010YE144I7G is a low-power, low-cost Cyclone® 10 LP Field Programmable Gate Array (FPGA) featuring 10,320 logic elements, 423,936 bits of embedded memory, and 88 user I/O pins in a 144-pin plastic Enhanced Quad Flat Pack (EQFP-144) with an exposed thermal pad. It is a member of the Cyclone 10 LP family designed for high-volume, cost-sensitive applications where low static and dynamic power are mandatory. An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs) connected via programmable interconnect. Unlike an ASIC, the FPGA's digital function is defined after PCB assembly through configuration bitstream loading. FPGAs sit above microcontrollers in the programmable logic hierarchy because they offer true hardware parallelism, hundreds of I/Os, and fabric that can be reconfigured to implement any digital function from glue logic to video pipelines or soft-core CPUs. Key features include 10,320 logic elements, 56 embedded 18x18 multipliers, 414 Kbits of total embedded SRAM, four general-purpose PLLs, and 88 maximum user I/Os. The device supports LVDS, LVCMOS, SSTL, and HSTL I/O standards across 6 I/O banks, and integrates a hard memory controller and configuration circuitry. Configuration is supported via JTAG, AS, PS, and FPP modes for both production and in-system programming. Power consumption is optimized for static-power-sensitive designs with a typical quiescent current in the low tens of mA. The Cyclone 10 LP architecture uses a TSMC 60 nm low-power process, with on-chip RAM blocks, DSP blocks, and global clock networks. Each logic element contains a 4-input look-up table (LUT) and a register, while DSP blocks provide hardware-accelerated multiplication and accumulation. The exposed-pad EQFP-144 package improves thermal performance for industrial temperature operation (-40 °C to +100 °C I7G grade) and enables hand-solder-friendly prototyping. Typical applications include industrial motor control, video surveillance, LED video walls, machine vision pre-processing, low-cost software-defined radio, factory automation I/O expansion, and portable medical device front-ends. The device is also widely used as a bridge IC between legacy parallel buses and modern serial interfaces. The Cyclone 10 LP family shares its toolchain (Quartus Prime) with other Intel FPGA lines, enabling IP reuse across Cyclone IV, Cyclone V, and Cyclone 10 GX designs. When designing with this part, ensure that the JTAG chain pinout matches the programmer header, and place a 10 µF + 100 nF decoupling network within 5 mm of each VCCINT/VCCA power pin. The exposed pad MUST be soldered to a copper pour of at least 1 square inch and thermally tied to the ground plane. This page synthesizes distributor pricing, drop-in alternatives within the Cyclone 10 LP family, and practical design notes that are not aggregated in the manufacturer datasheet PDF alone.

USD $17,90 В наличии
10CL010YM164A7G - Cyclone 10 LP FPGA, 10K LE, 164-MBGA | Intel
10CL010YM164A7G

10CL010YM164A7G - Cyclone 10 LP FPGA, 10K LE, 164-MBGA | Intel

The Intel 10CL010YM164A7G is a low-power member of the Cyclone 10 LP family of FPGAs, offering 10,320 logic elements (approximately 10K LE), 423,936 bits of embedded memory, and 101 maximum user I/O pins in a compact 164-ball MBGA package (also referenced as TFBGA-164). It targets cost-sensitive, low-static-power applications across industrial, automotive, and consumer segments where traditional CPLDs or ASSPs lack the required logic density. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks, configurable interconnect, and dedicated hardware resources (such as multipliers, memory blocks, and I/O serdes) that the designer configures after manufacture. FPGAs occupy a tier between general-purpose microcontrollers and fixed-function ASICs: they offer ASIC-like parallelism and I/O flexibility while remaining fully re-programmable, eliminating mask costs and enabling rapid design iteration. The Cyclone 10 LP family is fabricated on a low-power process optimized for static-power minimization, positioning it below higher-performance Cyclone families. Key features of the 10CL010YM164A7G include 46 embedded 18x18 multipliers, 2 PLLs, configuration via serial or parallel flash, support for LVDS, LVCMOS, SSTL, and other common I/O standards, and an operating junction temperature range from -40C to +125C (automotive grade). The 164-MBGA package is 8x8 mm with a 0.5 mm ball pitch, enabling compact PCB integration. The device supports Intel Quartus Prime design software for synthesis, place-and-route, and timing closure. Architecturally, the device uses a 6-input LUT-based logic element fabric with embedded SRAM, distributed logic, and DSP blocks for efficient arithmetic. Configuration memory is volatile SRAM, requiring an external flash device for boot. The low-power process minimizes idle consumption, making the part attractive for always-on edge nodes and battery-backed systems. Typical applications include industrial motor control, video processing bridges, automotive infotainment and cluster displays, IoT edge aggregation, low-cost protocol bridging (UART, SPI, I2C to Ethernet or USB), and as a glue-logic replacement for legacy CPLD footprints that have outgrown their density. When designing with this device, ensure PCB layout meets Intel's 0.5 mm-pitch BGA fanout and decoupling guidelines. A configuration flash device is mandatory because Cyclone 10 LP SRAM-based configuration is volatile on power cycle. This page synthesizes distributor pricing, package-aware drop-in alternatives, and practical design notes not available in any single manufacturer document.

USD $21,10 В наличии
10CL010YM164C6G - Cyclone 10 LP FPGA, 10K LE, 164-MBGA | Intel
10CL010YM164C6G

10CL010YM164C6G - Cyclone 10 LP FPGA, 10K LE, 164-MBGA | Intel

The Intel 10CL010YM164C6G is a member of the Cyclone 10 LP family of low-power FPGAs, delivering 10,320 logic elements, 423,936 bits of embedded memory, and 56 (18x18) hardware multipliers in a 164-ball FineLine BGA (M164) package. The device is built on TSMC's low-power 60 nm process and supports up to 101 general-purpose user I/O plus four PLL blocks, making it suitable for cost- and power-sensitive applications such as industrial I/O expansion, motor control, video bridging, and I2S/TDM audio routing. The M164 BGA package measures 8x8 mm with a 0.5 mm ball pitch, matching the footprint of other Cyclone 10 LP M164 variants for drop-in scalability. An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit whose logic fabric, routing, and I/O can be configured by the customer after manufacture. FPGAs sit between fixed-function ASICs (highest performance, highest NRE cost) and microcontrollers (lowest cost, fixed CPU instruction set), offering parallel hardware execution, configurable I/O standards (LVDS, LVCMOS, SSTL, HSTL), and optional hard IP such as PLLs, transceivers, multipliers, and memory blocks. Within the broader semiconductor taxonomy, an FPGA belongs to: FPGA -> programmable logic device (PLD) -> logic IC -> integrated circuit -> semiconductor. Cyclone 10 LP specifically targets the low-power end of the Intel FPGA portfolio, with static power typically below 100 mW for the 10K-LE tier. Key features include a 1.2 V core supply with hot-socketing support, support for LVDS at up to 840 Mbps per pair, configuration via JTAG, serial (AS), or parallel flash, and an operating junction temperature range of 0C to +85C for the commercial speed grade 6. The Cyclone 10 LP family shares its Quartus Prime design entry with the Cyclone V and Cyclone IV families, allowing reuse of legacy IP cores and reference designs. Architecturally, the 10CL010 uses Intel's M4K (4 Kbit) embedded SRAM blocks that can be cascaded into true dual-port or FIFO configurations, and DSP blocks that implement 18x18 multiplication, accumulation, and dynamic coefficient modes. The four general-purpose PLLs support fractional-N synthesis, allowing precise non-integer clock multiplication for video pixel clocks and audio sample-rate generators. Typical applications include industrial machine vision pre-processing, low-cost motor control (FOC loops), video format conversion (BT.656/CSI-2 bridging), and low-density glue logic replacement. The 164-MBGA package is recommended when board space is constrained and the design requires more than the 144-ball variants (10CL010YE144) can offer. When designing with this device, prioritize the dedicated VCCINT, VCCA, and VCCPD decoupling networks specified in the Cyclone 10 LP pin connection guidelines; shared rails can introduce PLL jitter. For new designs, consider the 10CL010YM164A7G as an upgrade path if higher speed grades or extended temperature are later required. This page synthesizes distributor stock, parametric drop-in alternatives, and design notes not found in a single manufacturer datasheet, helping engineers reduce sourcing risk and BOM decisions in one place.

USD $11,40 В наличии
10CL010YM164C8G - Cyclone 10 LP FPGA, 10K LE, 164-MBGA | Intel
10CL010YM164C8G

10CL010YM164C8G - Cyclone 10 LP FPGA, 10K LE, 164-MBGA | Intel

The Intel (formerly Altera) 10CL010YM164C8G is a low-power Cyclone 10 LP Field-Programmable Gate Array (FPGA) built on a TSMC 60 nm low-power process, integrating 10,320 logic elements and 414 Kbit of embedded memory in a 164-ball Micro BGA (MBGA) package. The device ships with the industrial-grade -8C speed grade targeting 1.0 V core operation with low static and dynamic power, and is specified over the 0 C to +85 C commercial junction temperature range. It is supplied in tray packaging. A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit that contains an array of configurable logic blocks (CLBs), programmable interconnect, and on-die memory blocks whose function is defined after manufacture through a hardware description language (HDL) bitstream. Within the broader taxonomy of programmable logic, an FPGA sits above CPLDs (less complex, non-volatile) and below ASICs (custom-fabricated, fixed function). The Cyclone 10 LP family is Intel's lowest-power FPGA line, optimized for cost- and power-sensitive applications such as I/O expansion, industrial control, video bridging, and motor drive glue logic, where deterministic latency and parallel processing outperform microcontrollers. Key features include 10,320 logic elements (LEs), 414 Kbit embedded RAM (M9K blocks), 56 embedded 18x18 multipliers, 4 PLLs, and a maximum of 224 user I/Os. The device supports LVDS, LVCMOS, SSTL, and HSTL I/O standards with hot-socketing capability, and integrates a hard PCIe Gen1 controller (x1/x2) for protocol bridging. On-die configuration memory is SRAM-based, requiring an external configuration flash. Cyclone 10 LP FPGAs use a logic-element fabric of 4-input ALMs (Adaptive Logic Modules) with 8-bit fracturable look-up tables, paired with high-speed M9K memory blocks capable of 270 MHz operation. Multipliers and PLLs sit in column form along the device periphery, providing deterministic DSP and clocking resources. Configuration is loaded via JTAG, Active Serial (AS), Active Parallel (AP), or Passive Serial (PS) modes from external flash. Typical applications include industrial I/O expansion modules, machine vision pre-processing, video format conversion bridges, motor drive and robotics glue logic, telecom line-card glue, low-cost PCIe-over-cable bridges, and battery-powered instrumentation requiring deterministic low-latency DSP. Design with the Quartus Prime Lite toolchain; board bring-up needs a 1.0 V core rail with +/-5% tolerance and a configuration flash circuit.

USD $12,10 В наличии
10CL010YM164I7G - Cyclone 10 LP FPGA 10K LE | Intel | Industrial
10CL010YM164I7G

10CL010YM164I7G - Cyclone 10 LP FPGA 10K LE | Intel | Industrial

The Intel 10CL010YM164I7G is a low-power Cyclone 10 LP Field-Programmable Gate Array (FPGA) integrating 10,320 logic elements, 423,936 bits of embedded memory, and 101 maximum user I/O pins in a 164-ball FineLine BGA (MBGA) package measuring 8 mm x 8 mm. It operates from a 1.15 V to 1.25 V core supply (1.2 V nominal) across an industrial temperature range of -40 °C to 100 °C, making it suitable for cost- and power-sensitive embedded designs. An FPGA is a reconfigurable logic device whose interconnect and function are defined after manufacture, placing it between fixed-function ASICs (highest performance, highest NRE) and microcontrollers (lowest flexibility at the logic level). Cyclone 10 LP sits inside Intel's low-power FPGA family and is commonly used as a glue-logic and parallel-I/O expansion companion to an applications processor. The 10CL010YM164I7G is the 164-MBGA member of the 10CL010 die, offering the highest I/O count in this density at this package size. Key features include 10,320 logic elements, 423,936 bits (414 Kb) of embedded SRAM, 23 embedded 18 x 18 multipliers, two general-purpose PLLs per device, and configuration support via JTAG, Active Serial (AS), and Passive Serial (PS) modes. The device uses a 1.2 V core with separate, user-selectable I/O bank voltages, allowing LVCMOS 1.2 V through 3.3 V and LVDS signaling on the same die. Architecturally, the 10CL010YM164I7G is built on a low-power process variant of the Cyclone 10 family, with hard memory blocks, hard multiplier blocks, and variable-precision DSP capability. Two PLLs provide clock multiplication, division, and phase shifting for system timing. Typical applications include industrial motor control, factory automation I/O expansion, video bridging and image aggregation, IoT edge gateways, and portable or battery-powered instrumentation. Designers also use this device as a low-cost companion to higher-performance SoCs for parallel sensor aggregation, custom high-speed interfaces, and legacy bus bridging (PCI, ISA, SRAM). When designing with this device, validate that your I/O bank assignment matches the required signaling standard for each interface, and respect the LVDS I/O count limit per bank. Use Intel Quartus Prime Lite Edition for synthesis, place-and-route, and timing closure; the device is supported by the free Quartus Prime toolchain. This page synthesizes authorized-distributor pricing, drop-in alternatives, and engineering guidance compiled from the Cyclone 10 LP datasheet and reference designs - context not bundled in the standalone PDF.

USD $9,45 В наличии
10CL010YU256A7G - Cyclone 10 LP FPGA 10K LE | Intel | 256-LFBGA
10CL010YU256A7G

10CL010YU256A7G - Cyclone 10 LP FPGA 10K LE | Intel | 256-LFBGA

The Intel 10CL010YU256A7G is a Cyclone 10 LP low-power Field Programmable Gate Array (FPGA) featuring 10,320 logic elements, 423,936 bits of embedded memory, and 176 maximum user I/Os, housed in a 256-ball FineLine BGA (LFBGA, U256) package. The "A7G" speed grade combined with the automotive temperature rating makes this variant tailored for cost-sensitive, power-constrained designs that still require deterministic logic fabric behavior. An FPGA is a semiconductor device built around a configurable matrix of programmable logic blocks (LABs), interconnect, and I/O cells that engineers can re-program post-manufacturing. FPGAs occupy the middle ground between fixed-function ASICs (lowest unit cost, no flexibility) and microcontrollers (software-defined, sequential). The Cyclone 10 LP family specifically targets low static and dynamic power applications such as industrial motor control, video bridging, and I/O expansion. Key features include up to 423,936 bits of embedded SRAM (414 Kbits), integrated multipliers, embedded PLLs, and support for external memory interfaces including DDR3. The 256-ball LFBGA package provides 176 usable GPIO plus 8 dedicated clock inputs, offering ample pin budget for parallel sensor aggregation or video pipelines. The device is fabricated on a low-power 60 nm process, drawing as little as 117 mW per 100K LE at typical utilization. The 10CL010YU256A7G occupies the smallest density tier within the Cyclone 10 LP U256 family, making it ideal for glue-logic replacement, custom interface bridging (I2C/SPI/UART to parallel buses), simple state-machine controllers, and low-complexity image processing pre-stage logic. Designers migrating from legacy Cyclone IV devices find a drop-in footprint match in the U256 BGA. When designing with this part, plan power sequencing for the 1.2 V core and 2.5–3.3 V I/O banks independently, and use Quartus Prime Lite for synthesis and place-and-route. The U256 package is not hand-solderable; reflow or socket-based programming is required. This page synthesizes distributor pricing across DigiKey, Mouser, and Octopart, cross-references drop-in same-package alternatives, and includes design notes on power, decoupling, and JTAG configuration not found in the manufacturer datasheet summary.

USD $20,85 В наличии
10CL010YU256C6G FPGA - Cyclone 10 LP 176 I/O | Intel
10CL010YU256C6G

10CL010YU256C6G FPGA - Cyclone 10 LP 176 I/O | Intel

The Intel 10CL010YU256C6G is a Cyclone 10 LP Field Programmable Gate Array (FPGA) with 10,320 logic elements, 176 user I/O pins, 423,936 RAM bits, and a 1.2 V core supply, housed in a 256-ball LFBGA package. This commercial-temperature, speed-grade-6 variant provides a low-cost, low-power fabric for logic integration in volume applications. An FPGA is a semiconductor device whose digital logic can be configured after manufacturing. Unlike fixed-function ASICs, FPGAs allow the same board to implement different logic functions by loading a configuration bitstream into internal SRAM cells. In the product hierarchy, an FPGA belongs to the programmable logic family, sits above CPLDs in density and capability, and is used with microcontrollers, DSPs, and memory in embedded systems. The Cyclone 10 LP family is Intel/Altera's entry-level, low-cost FPGA family supporting a wide range of parallel and interface logic tasks. Key features include 10,320 logic elements arranged for efficient register and combinatorial logic, 423,936 bits of embedded memory for FIFOs and small buffers, and 176 user I/O pins configurable with multiple I/O standards. The 1.2 V core voltage reduces dynamic power. The density in a 256-LFBGA is appropriate for designs that require substantial I/O in a compact package. Technical depth: Cyclone 10 LP devices are SRAM-based; they must be configured after power-up from an external configuration device, host processor, or JTAG. The 10CL010 variant balances logic capacity and I/O for 8/16/32-bit buses and state machines. RAM counts only generic values; memory blocks can support FIFO, ROM, and small buffers. The LFBGA package yields low parasitic inductance and a small footprint. Because speed-grade-6 parts target higher clock rates than lower-cost speed-grade-8 variants, the device offers dynamic tradeoffs between performance and price. Typical applications include industrial motor-control FPGA interfaces, machine-vision and display timing logic, serial-to-parallel bridge applications in test equipment, and flexible I/O expansion in factory automation. With 176 user I/O and small-package 1.2 V power, this part fits bus conversion and real-time control functions. For Ethernet or PCIe interfaces, use with external PHYs or controllers because built-in transceivers are not present. Design consideration: decouple the 1.2 V core rail with multiple ceramic capacitors close to the BGA balls, verify I/O bank supplies satisfy required I/O standard voltages, and store the configuration bitstream in a verified serial-configuration device. The device does not include built-in flash, so configuration memory must be provided. This page synthesizes distributor pricing, availability, drop-in alternatives, and practical design guidance not found in the compact distributor snippets, enabling fast sourcing decisions without opening multiple datasheets.

USD $9,60 В наличии
10CL010YU256C8G - Cyclone 10 LP FPGA 10K LE 256-BGA | Intel
10CL010YU256C8G

10CL010YU256C8G - Cyclone 10 LP FPGA 10K LE 256-BGA | Intel

The Intel 10CL010YU256C8G is a low-power Cyclone 10 LP field-programmable gate array (FPGA) featuring 10,320 logic elements, 423,936 bits of embedded memory, and 176 maximum user I/Os, housed in a 256-ball fine-pitch BGA (UBGA) package. This cost-optimized FPGA delivers the smallest possible form factor for low-power programmable logic, targeting high-volume applications such as I/O expansion, bridge logic, and chip-to-chip interfacing. The Cyclone 10 LP family consumes up to 50% lower power than the previous Cyclone IV generation while providing comparable logic density and DSP capability. What is an FPGA? A Field-Programmable Gate Array is a semiconductor integrated circuit containing configurable logic blocks (CLBs), programmable interconnect, and dedicated I/O cells, allowing designers to implement custom digital logic after silicon fabrication. FPGAs sit in the programmable logic hierarchy between fixed-function ASICs (high NRE, long lead time) and microcontrollers (fixed architecture, sequential execution). The Cyclone 10 LP family specifically targets low-static-power applications and belongs to Intel's (formerly Altera's) mainstream FPGA portfolio. Key features include support for up to 414 Kbits of embedded SRAM, dedicated 18x18 multiplier blocks for DSP functions, four general-purpose PLLs for clock management, and a hard memory controller subsystem. The device operates across a commercial junction temperature range with multiple speed grades. Configuration is supported through JTAG, Active Serial (AS), and Passive Serial (PS) modes, enabling flexible in-system programming from commodity flash memories or microcontrollers. The Cyclone 10 LP architecture is built on a low-power 20nm process technology, achieving static power below 25mW typical while supporting toggle rates up to several hundred MHz in logic-intensive paths. Each logic array block contains 16 logic elements, each with a 4-input look-up table, dedicated carry chain, and register. The I/O subsystem supports LVDS, LVCMOS, SSTL, and other single-ended and differential standards up to 875 Mbps. Typical applications include industrial motor drives, video processing and bridging, machine vision interfaces, low-cost video surveillance, portable medical devices, and human-machine interface (HMI) controllers. The Cyclone 10 LP is also widely deployed in industrial IoT edge nodes and protocol-bridging designs that require parallel processing beyond microcontroller capability. Designers should allocate sufficient PCB area for power decoupling near the device, taking advantage of the dedicated PLL analog supply pins (VCCA) and requiring at least four bulk capacitors plus high-frequency ceramic bypass at every power pin. Thermal dissipation is minimal at low toggle rates but rises significantly in DSP-heavy designs, where a thermal relief copper pad under the BGA improves reliability. This page synthesizes real-time distributor stock and pricing, drop-in same-package Cyclone 10 LP alternatives, and practical PCB design notes not consolidated on any single manufacturer page.

USD $13,95 В наличии
10CL010YU256I7G - Cyclone 10 LP FPGA, 10K LE, 256-BGA | Intel
10CL010YU256I7G

10CL010YU256I7G - Cyclone 10 LP FPGA, 10K LE, 256-BGA | Intel

The Intel (formerly Altera) 10CL010YU256I7G is a low-power Cyclone 10 LP field-programmable gate array (FPGA) featuring 10,320 logic elements, 423,936 bits of embedded memory, and 176 maximum user I/Os, housed in a 256-ball FineLine BGA (U256) package. Built on a low-power 60 nm process, it integrates 56 (18x18) hardware multipliers and a wide range of clocking and I/O features for cost-sensitive, high-volume applications. A field-programmable gate array (FPGA) is a reconfigurable semiconductor device built from an array of configurable logic blocks (CLBs), embedded memory blocks, programmable interconnect, and hardened I/O peripherals. Unlike an ASIC, an FPGA's function is not fixed at fabrication - the bitstream loaded at power-up defines its logic. In the power-management and digital-logic hierarchy, FPGAs sit alongside microcontrollers and DSPs as flexible compute platforms for glue logic, parallel signal processing, video bridging, and industrial control. The Cyclone 10 LP family specifically targets low static and dynamic power for energy-constrained designs. Key specifications of the 10CL010YU256I7G include 10,320 logic elements, 54 Kbits of M9K embedded memory, 56 (18x18) hardware multipliers, four general-purpose PLLs, 176 maximum user I/Os, and 1.2 V core operation with multi-voltage I/O support. The device supports DDR2/DDR3/LPDDR2 external memory via soft memory controllers and offers configuration via serial (AS) or JTAG modes. Total internal RAM bits equal 423,936. The Cyclone 10 LP architecture pairs an FPGA fabric with hardened features such as PLLs, I/O serdes, and a dedicated configuration controller, simplifying timing closure and reducing design risk. The U256 BGA provides 176 usable GPIO and supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards, enabling interfacing with virtually any modern digital logic family. Typical applications include industrial machine vision, motor control, video bridging (HDMI/DisplayPort/MIPI), I/O expansion for processors, factory automation, and portable medical instrumentation. The Cyclone 10 LP is engineered for applications requiring deterministic parallel processing at modest clock speeds with low power dissipation. When designing with the 10CL010YU256I7G, ensure the PCB supports the BGA footprint with proper microvia or via-in-pad technology for reliable assembly. Provide a stable 1.2 V core supply via a low-noise LDO and decouple each power rail with 0.1 uF and 10 uF ceramic capacitors placed as close as possible to the package balls. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical FPGA design notes not found in the manufacturer datasheet.

USD $27,18 В наличии
10CL010ZE144I8G - Cyclone 10 LP FPGA, 10K LE, 144-EQFP | Intel
10CL010ZE144I8G

10CL010ZE144I8G - Cyclone 10 LP FPGA, 10K LE, 144-EQFP | Intel

The Intel (Altera) 10CL010ZE144I8G is a low-power Cyclone 10 LP Field Programmable Gate Array (FPGA) with 10,320 logic elements, 423,936 bits of embedded memory, and 88 user I/O pins, housed in a 144-pin EQFP (exposed-pad LQFP) package. The device is fabricated on a low-power 60 nm process and targets cost- and power-sensitive applications where an ASIC would otherwise be required. An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hardened IP such as memory blocks, multipliers, PLLs, and I/O serializers. FPGAs sit at the same abstraction level as ASICs but are reprogrammable in-circuit, making them ideal for prototyping, low-volume production, and designs requiring late-stage logic changes. Cyclone 10 LP specifically occupies the low-power, low-cost end of the Intel FPGA portfolio, sitting below Cyclone V and MAX series in cost per logic element. Key features of the 10CL010ZE144I8G include 10,320 logic elements (LEs), 423,936 bits (approximately 414 Kbit) of embedded SRAM, 46 embedded 18x18 multipliers, 4 general-purpose PLLs, and 88 single-ended (or 44 differential-pair) user I/Os. The device supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards at voltages from 1.2 V to 3.3 V, with per-pin dynamic phase alignment. Architecturally, the Cyclone 10 LP fabric uses adaptive logic modules (ALMs) of 8 inputs each, fed by a multi-level routing hierarchy with 8x4, 16x16, and longer-line paths. The hardened memory blocks are true dual-port 9-Kbit M9K blocks supporting up to 315 MHz operation. The device is configured via JTAG or serial passive/active modes using industry-standard .pof / .sof bitstreams generated by Intel Quartus Prime Lite. Typical applications include industrial motor and motion control, video bridging and protocol conversion, low-cost software-defined radio front-ends, I/O expansion for embedded processors, and portable medical or test-and-measurement equipment. The exposed-pad EQFP-144 package allows efficient heat removal without an external heatsink, suitable for fanless industrial enclosures. When designing with this part, ensure that the exposed pad is soldered to a sufficiently large copper pour (at least 1 square inch) to meet the thermal resistance of approximately 28°C/W. Use the Quartus Prime pin planner to assign I/O standards and bank voltages before PCB layout, and verify configuration mode (AS/PS/JTAG) is selected correctly for your chosen configuration flash.

USD $19,60 В наличии
10CL010ZM164I8G - Cyclone 10 LP FPGA 10K LE 164-MBGA | Intel
10CL010ZM164I8G

10CL010ZM164I8G - Cyclone 10 LP FPGA 10K LE 164-MBGA | Intel

The Intel (formerly Altera) 10CL010ZM164I8G is a low-power Cyclone 10 LP Field Programmable Gate Array (FPGA) delivering 10,320 logic elements, 423,936 bits of embedded memory, and 101 maximum user I/O pins in a compact 164-ball FineLine BGA (MBGA) package. Built on a low-power 60 nm process, the device targets cost- and power-sensitive applications where ASIC-level integration is not justified and where designers need the flexibility of programmable logic with deterministic real-time performance. The part is specified for the industrial temperature range (-40C to +100C) and ships in tray packaging as OPN suffix I8G. A Cyclone 10 LP FPGA is a member of the SRAM-based programmable logic family, sitting in the broader taxonomy of programmable logic devices (CPLD -> low-density FPGA -> mid-range FPGA -> high-end SoC FPGA). It is the lowest-power member of the Cyclone 10 generation, designed specifically for parallel processing, glue-logic replacement, and I/O expansion in cost-sensitive industrial, automotive driver-assist, video processing, and consumer equipment. Compared with a CPLD, a Cyclone 10 LP FPGA offers far greater logic density, embedded multipliers, and on-chip RAM blocks at the cost of needing a configuration image. Key features of the 10CL010ZM164I8G include up to 10,320 logic elements, 46 embedded 18x18 multipliers (for DSP), 423 Kbits of embedded SRAM, configuration via passive serial (PS), fast passive parallel (FPP), or JTAG, integrated phase-locked loops (PLLs), and support for external memory interfaces such as DDR2/DDR3/LPDDR2 via soft IP. The device operates from a 1.0 V core with separate bank I/O voltages selectable per bank, and includes LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards. Architecturally, the 10CL010ZM164I8G is built around LAB (Logic Array Block) tiles, M9K embedded memory blocks, and 18x18 multiplier blocks, all stitched together by a multi-tier routing fabric. Configuration bitstream is stored in on-chip SRAM and loaded at power-up from external flash or a microcontroller, after which the device behaves as a fixed-function ASIC equivalent until reconfigured. Typical applications include industrial machine vision cameras, motor control and drive interfaces, LED video walls and display controllers, software-defined radio front-ends, low-cost protocol bridges (I2C/SPI/UART/CAN to Ethernet), and I/O expansion for microcontrollers in IoT edge nodes. The 164-ball MBGA package provides 101 usable user I/Os with multiple banks for mixed-voltage interfacing. When designing with this device, plan for an external configuration flash (typically EPCQ or compatible serial NOR), a clean 1.0 V core supply, and proper decoupling per Intel's pin connection guidelines. Note that I8G denotes the industrial temperature grade and tray packaging; design tooling should target the Quartus Prime Lite or Standard Edition for synthesis, place-and-route, and bitstream generation. This page synthesizes distributor pricing, drop-in Cyclone 10 LP variants, and practical design notes not found in the manufacturer datasheet alone.

USD $23,10 В наличии
10CL010ZU256I8G - Cyclone 10 LP FPGA 10K LE 256-UBGA | Intel
10CL010ZU256I8G

10CL010ZU256I8G - Cyclone 10 LP FPGA 10K LE 256-UBGA | Intel

The Intel (formerly Altera) 10CL010ZU256I8G is a low-power Cyclone® 10 LP Field-Programmable Gate Array (FPGA) with 10,320 logic elements, 423,936 bits of embedded memory, and 176 maximum user I/Os, housed in a 256-ball UFBGA (UBGA) package with industrial temperature grade and speed grade 8. An FPGA (Field-Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hard IP such as multipliers, memory blocks, and SERDES. Within the broader programmable logic taxonomy, the Cyclone 10 LP family sits below high-performance Stratix and mid-range Arria devices, targeting cost- and power-sensitive applications that still need parallel DSP, custom I/O bridging, and in-system reconfigurability. The "10 LP" suffix indicates the low-power variant of Intel's Cyclone 10 generation, optimized for static and dynamic power efficiency. Key features include 10,320 logic elements, 56 (18x18) hardware multipliers for DSP, 423 Kbits of embedded RAM, 176 maximum user I/Os, and integrated phase-locked loops (PLLs). The device supports LVDS, LVCMOS, SSTL, and other single-ended and differential I/O standards, and is fabricated on a low-power 60 nm process. The 256-ball UFBGA package provides high-density board integration for industrial applications. Typical applications include industrial motor control and factory automation, video processing and display bridging, low-cost ASIC prototyping, I/O expansion and protocol bridging (UART/SPI/I2C to parallel), and portable or battery-powered embedded systems. The low static power suits energy-constrained designs such as handheld test equipment and IoT edge nodes. Design considerations: PCB layout must follow Intel's decoupling and routing guidelines for BGA packages, with matched-length traces for LVDS pairs and proper thermal vias under the package. The device requires a configuration memory (typically EPCQ or a similar quad-SPI flash) and a clock source for the PLLs. Quartus Prime (Lite or Standard edition) is the supported design toolchain. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select and source the part quickly.

USD $22,10 В наличии
10CL016YE144A7G - Cyclone 10 LP FPGA, 15K LE, 78 I/O, 144-LQFP | Intel
10CL016YE144A7G

10CL016YE144A7G - Cyclone 10 LP FPGA, 15K LE, 78 I/O, 144-LQFP | Intel

The Intel (Altera) 10CL016YE144A7G is a low-power member of the Cyclone 10 LP family of FPGAs, integrating 15,408 logic elements, 516,096 bits of embedded memory, and 78 user I/Os in a 144-pin LQFP exposed-pad (E144) package with an automotive temperature grade. A Field Programmable Gate Array (FPGA) is a programmable semiconductor device built from a matrix of configurable logic blocks (CLBs), embedded memory, multipliers, and programmable I/O cells. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs) -> programmable logic ICs -> logic ICs -> integrated circuits -> semiconductors. Unlike fixed-function ASICs, FPGAs are configured post-manufacture via an HDL bitstream, enabling rapid prototyping and field upgrades. The Cyclone 10 LP family is positioned as Intel's low-cost, low-power FPGA line optimized for high-volume, cost-sensitive applications such as industrial motor control, video bridging, and I/O expansion. Key features of the 10CL016YE144A7G include 56 embedded 18x18 multipliers, four general-purpose PLLs, 504 Kbits of embedded memory (M9K blocks), and 78 single-ended LVCMOS/LVTTL/LVDS-compatible user I/Os operating at 1.2 V core. The device supports configuration via passive serial (PS), fast passive parallel (FPP), and JTAG modes, with bitstream encryption and decompression supported by on-chip hardware. The 144-LQFP exposed-pad package provides a manageable 1.0 mm pitch suitable for low-cost multilayer PCB assembly. The Cyclone 10 LP architecture uses a TSMC 60 nm low-power process and the same Logic Element (LE) building block as prior Cyclone generations, ensuring software and IP compatibility with Quartus Prime design tools. The A7G speed grade with automotive (-40 C to +125 C) junction rating makes the 10CL016YE144A7G particularly attractive for harsh-environment industrial and automotive subsystem designs where full Cyclone V/10 GX power is not required. Typical applications include industrial machine vision interface bridging, motor-control PWM generation, low-power sensor aggregation hubs, video format conversion, and automotive infotainment auxiliary controllers. Its combination of small footprint, automotive-grade temperature range, and abundant logic density makes it a frequent choice for distributed I/O and protocol-bridging tasks. When designing with this device, pay close attention to the exposed thermal pad (EP) - it must be soldered to a ground copper pour with multiple thermal vias to meet the automotive junction-temperature envelope. Use Intel's Quartus Prime Lite or Standard edition for synthesis and place-and-route, and verify pin assignments against the device pin-out file for the E144 package before tape-out. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, including cross-references to other E144 Cyclone 10 LP variants and application-specific guidance.

USD $27,95 В наличии
10CL016YE144C6G - Cyclone 10 LP FPGA 16K LE | Intel | Altera
10CL016YE144C6G

10CL016YE144C6G - Cyclone 10 LP FPGA 16K LE | Intel | Altera

The Intel (Altera) 10CL016YE144C6G is a low-power Cyclone 10 LP field-programmable gate array (FPGA) with 15,408 logic elements, 516,096 bits of embedded memory, and 56 (18x18) hardware multipliers, housed in a 144-pin EQFP/LQFP package with exposed thermal pad. This commercial-temperature device is part of Intel's Cyclone 10 LP family, optimized for low static power and cost-sensitive applications that previously used Cyclone IV devices. An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit whose digital logic functionality is defined after manufacturing through a configuration bitstream loaded into on-chip SRAM. In the system hierarchy, FPGAs sit between fixed-function ASICs and microcontrollers: like microcontrollers they are reprogrammable in-circuit, but unlike microcontrollers they implement logic in parallel hardware fabric rather than sequential instruction execution. Cyclone 10 LP specifically targets the low-cost, low-power tier of Intel's FPGA portfolio, balancing logic density with sub-watt static power consumption. Key features of the 10CL016YE144C6G include 78 maximum user I/O pins, four general-purpose PLLs, two I/O banks supporting LVDS, LVCMOS, SSTL, and HSTL I/O standards, and configuration via serial flash (AS), parallel flash (AP), or JTAG. The device operates from a 1.0V/1.2V core voltage with separate VCCIO banks, and offers commercial temperature grade (0C to +85C junction). Architecturally, the Cyclone 10 LP fabric uses 8-input adaptive logic modules (ALMs), variable-precision DSP blocks, and M9K embedded memory blocks. Configuration bitstream is stored in on-chip SRAM and must be loaded from external flash or JTAG at every power-up. The 'Y' package suffix indicates 144-pin EQFP/LQFP with exposed pad. Typical applications include industrial motor control, video bridging and image processing, low-cost I/O expansion, protocol bridging (UART/SPI/I2C to Ethernet), and portable or battery-powered embedded systems. Designers commonly pair this FPGA with TI or Maxim power management ICs and Micron NOR flash for configuration storage. When designing with the 10CL016YE144C6G, allocate at least four PCB layers for proper signal and power integrity, and provide a continuous GND plane under the exposed thermal pad. The Quartus Prime Lite design software is the supported toolchain for synthesis, place-and-route, and bitstream generation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the Cyclone 10 LP 10CL016YE144C6G - information not found in a single manufacturer datasheet page.

USD $23,90 В наличии
10CL016YE144C8G - Cyclone 10 LP FPGA, 16K LE, 144-EQFP | Intel
10CL016YE144C8G

10CL016YE144C8G - Cyclone 10 LP FPGA, 16K LE, 144-EQFP | Intel

The Intel (formerly Altera) 10CL016YE144C8G is a Cyclone 10 LP field-programmable gate array (FPGA) built on a low-power 60 nm process, delivering 15,408 logic elements, 516,096 bits of embedded memory, and 56 embedded 18x18 multipliers in a 144-pin EQFP exposed-pad package. Operating from a 1.0 V core supply with separate VCCIO banks for I/O flexibility, the device supports commercial (0C to +85C), industrial (-40C to +100C), and automotive (-40C to +125C) temperature grades, with the C8 speed grade denoting the slowest of three commercial speed grades (C6, C7, C8). An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks, configurable interconnects, and dedicated hardware blocks (memory, multipliers, PLLs) that engineers can reconfigure after manufacture. FPGAs sit between general-purpose microcontrollers and application-specific integrated circuits (ASICs) in the design hierarchy: more flexible than ASICs, far more parallel than MCUs. The Cyclone 10 LP family specifically targets applications where traditional FPGAs would exceed power or cost budgets, enabling FPGA adoption in industrial, automotive, video, and IoT edge designs where millions of gate equivalents are needed without the NRE of an ASIC. Key features of the 10CL016YE144C8G include 15,408 logic elements implemented as adaptive logic modules (ALMs) with 8-input fracturable look-up tables, 56 embedded 18x18 multipliers (224 9x9 multipliers), 516 Kbits of embedded SRAM arranged in M9K blocks, four general-purpose PLLs, and up to 78 user I/O pins maximum. The device supports LVDS, LVCMOS, LVTTL, SSTL, and HSTL I/O standards with multiple voltage-referenced standards. Configuration is supported via JTAG, Active Serial (AS), Passive Serial (PS), and Fast Passive Parallel (FPP) modes. The Cyclone 10 LP architecture uses an ALM-based fabric providing better logic packing efficiency than older Cyclone IV/VI architectures. The 144-EQFP exposed-pad package provides thermal performance suitable for moderate power designs without external heatsinking, while configuration flexibility supports multi-boot and remote update behavior via the dedicated configuration controller. The C8 speed grade trades timing margin for lower unit cost compared to C6 or C7 grades. Typical applications include industrial motor control, video bridging and processing, machine vision interfaces, low-cost PCIe endpoints, IoT gateways, and human-machine interface (HMI) displays. The combination of low static and dynamic power with adequate logic density makes this device particularly suitable for cost-sensitive high-volume products. When designing with this FPGA, ensure proper decoupling per Intel's power distribution network guidelines (typically 0.1 uF and 10 uF capacitors near each supply pin) and follow the configuration scheme recommendations in the Cyclone 10 LP device handbook to achieve reliable multi-boot and remote update behavior. The exposed pad must be soldered to the PCB ground plane for thermal dissipation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select and source the right Cyclone 10 LP variant for cost-sensitive FPGA designs.

USD $16,40 В наличии
10CL016YE144I7G - Cyclone 10 LP FPGA, 16K LE, EQFP-144 | Intel
10CL016YE144I7G

10CL016YE144I7G - Cyclone 10 LP FPGA, 16K LE, EQFP-144 | Intel

The Intel 10CL016YE144I7G is a low-power Cyclone 10 LP field-programmable gate array (FPGA) integrating 15,408 logic elements, 516,096 bits of embedded M9K SRAM, and 56 hardware 18x18 multipliers in a 144-pin enhanced QFP (EQFP-144) package with an exposed thermal pad. Built on a 60 nm low-power process, the device provides 78 user I/O pins supporting LVDS, LVCMOS, SSTL, and HSTL standards, four general-purpose PLLs, and a global clock network serving up to 20 clock domains. A field-programmable gate array (FPGA) is a semiconductor device built around a matrix of configurable logic blocks (CLBs) connected via programmable interconnect fabric. Within the broader hierarchy, FPGAs belong to programmable logic devices (PLDs), which sit alongside ASICs, microcontrollers, and DSPs as the main classes of digital processing silicon. The Cyclone 10 LP family targets the low-power, cost-optimized end of the Intel FPGA portfolio, prioritizing low static and dynamic power over maximum logic density or transceiver bandwidth, and is commonly used as a glue-logic, motor-control, or image-pipeline accelerator in industrial and embedded designs. Key features include 56 embedded 18x18 multipliers delivering up to 1.3 GMACS DSP throughput, 516 Kbits of embedded M9K SRAM, four PLLs per device, and support for external memory interfaces including DDR2, DDR3, LPDDR2, and QDRII/+. The device supports high-speed LVDS interfaces up to 875 Mbps and offers configuration via passive serial (AS), active parallel (AP), JTAG, and Fast Passive Parallel (FPP) schemes, with a configuration bitstream size of approximately 5.6 Mbits. Typical applications span industrial motor control and factory automation, video surveillance and image processing pipelines, automotive driver-assistance body and infotainment domains, portable handheld test equipment, machine vision systems, and IoT edge nodes requiring custom parallel logic or DSP acceleration. The industrial-grade -40C to +100C (I7G) junction temperature range and lead-free EQFP-144 package also make the part suitable for harsh-environment deployment. When designing with this part, ensure the PCB provides adequate thermal relief under the exposed pad - the EQFP-144 EP must be soldered to a thermally conductive land pattern with at least nine thermal vias for the I7G industrial temperature grade. Plan configuration memory selection (EPCS16, EPCS64, or compatible serial flash) early in the schematic because the Cyclone 10 LP family does not include internal flash storage. This page combines distributor pricing, drop-in same-package Cyclone 10 LP alternatives, and practical board-level guidance that the manufacturer datasheet alone does not provide.

USD $12,10 В наличии
10CL016YF484C6G - Cyclone 10 LP FPGA 16K LE | Intel | BGA-484
10CL016YF484C6G

10CL016YF484C6G - Cyclone 10 LP FPGA 16K LE | Intel | BGA-484

The Intel 10CL016YF484C6G is a low-power Cyclone 10 LP field-programmable gate array (FPGA) with 15,408 logic elements, 516,096 bits of embedded memory, and 340 user I/Os, housed in a 484-ball FineLine BGA (FBGA) package. Built on a low-power 60 nm process, the Cyclone 10 LP family targets cost- and power-sensitive applications that still require programmable logic, embedded multipliers, and a broad peripheral set. An FPGA (Field-Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hard IP such as memory blocks, DSP blocks, and transceivers. FPGAs sit between general-purpose microcontrollers (sequential software execution) and ASICs (fixed-function silicon) in the digital IC hierarchy, offering hardware parallelism and post-production reconfigurability that microcontrollers cannot match and time-to-market advantages ASICs cannot offer. Cyclone 10 LP is Intel's low-power FPGA tier, positioned below Cyclone V and above MAX series CPLDs. Key features of the 10CL016YF484C6G include 15,408 logic elements (LEs), 56 embedded 18x18 multipliers, 516 Kbits of embedded SRAM, four general-purpose PLLs, and 340 maximum user I/Os. The device supports LVDS, LVCMOS, SSTL, and HSTL I/O standards across eight I/O banks, with per-bank reference voltage support. Configuration is supported via JTAG, active serial (AS), passive serial (PS), and Fast Passive Parallel (FPP) modes using industry-standard EPCS or EPCQ flash devices. Typical applications span industrial motor control, video processing pipelines, low-cost software-defined radio front-ends, LED display controllers, machine vision preprocessing, and IoT edge aggregation. The 484-ball FBGA package provides ample I/O density for high-pin-count glue logic and parallel sensor aggregation. When designing with this device, ensure the Quartus Prime Lite/Standard toolchain is used for synthesis and place-and-route. Pay attention to bank-based VCCIO planning when mixing 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V I/O standards, and follow Intel's PCB layout guidelines for FBGA breakout to avoid signal-integrity issues on DDR/parallel memory interfaces. This page synthesizes distributor stock, drop-in alternative ordering codes within the Cyclone 10 LP family, and practical design considerations not duplicated on the Intel Cyclone 10 LP device handbook landing page.

USD $40,15 В наличии