Intel

10CL016YE144C8G - Cyclone 10 LP FPGA, 16K LE, 144-EQFP | Intel

Артикул: 10CL016YE144C8G ✓ Активен

В наличии Отправка в течение 1–3 рабочих дней

1.0 V Vdss LVDS, LVCMOS, LVTTL, SSTL, HSTL Rds(on) 144-pin EQFP Exposed Pad Package C8 (slowest commercial) Speed 516,096 bits (M9K blocks) Memory

От $16.4 USD / шт.

MOQ: 1 |

Цена обновлена: 2026-10-05

Оптовые цены

Кол-во	Цена за ед.	Итого
1	$28.5	$28,50
10	$25.2	$252,00
100	$21.75	$2.175,00
500	$18.9	$9.450,00
1.000	$16.4	$16.400,00

ℹ️ Все цены указаны в USD

Открыть datasheet (PDF) Смотреть аналоги

Количество

10CL016YE144C8G Обзор

The Intel (formerly Altera) 10CL016YE144C8G is a Cyclone 10 LP field-programmable gate array (FPGA) built on a low-power 60 nm process, delivering 15,408 logic elements, 516,096 bits of embedded memory, and 56 embedded 18x18 multipliers in a 144-pin EQFP exposed-pad package. Operating from a 1.0 V core supply with separate VCCIO banks for I/O flexibility, the device supports commercial (0C to +85C), industrial (-40C to +100C), and automotive (-40C to +125C) temperature grades, with the C8 speed grade denoting the slowest of three commercial speed grades (C6, C7, C8).

An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks, configurable interconnects, and dedicated hardware blocks (memory, multipliers, PLLs) that engineers can reconfigure after manufacture. FPGAs sit between general-purpose microcontrollers and application-specific integrated circuits (ASICs) in the design hierarchy: more flexible than ASICs, far more parallel than MCUs. The Cyclone 10 LP family specifically targets applications where traditional FPGAs would exceed power or cost budgets, enabling FPGA adoption in industrial, automotive, video, and IoT edge designs where millions of gate equivalents are needed without the NRE of an ASIC.

Key features of the 10CL016YE144C8G include 15,408 logic elements implemented as adaptive logic modules (ALMs) with 8-input fracturable look-up tables, 56 embedded 18x18 multipliers (224 9x9 multipliers), 516 Kbits of embedded SRAM arranged in M9K blocks, four general-purpose PLLs, and up to 78 user I/O pins maximum. The device supports LVDS, LVCMOS, LVTTL, SSTL, and HSTL I/O standards with multiple voltage-referenced standards. Configuration is supported via JTAG, Active Serial (AS), Passive Serial (PS), and Fast Passive Parallel (FPP) modes.

The Cyclone 10 LP architecture uses an ALM-based fabric providing better logic packing efficiency than older Cyclone IV/VI architectures. The 144-EQFP exposed-pad package provides thermal performance suitable for moderate power designs without external heatsinking, while configuration flexibility supports multi-boot and remote update behavior via the dedicated configuration controller. The C8 speed grade trades timing margin for lower unit cost compared to C6 or C7 grades.

Typical applications include industrial motor control, video bridging and processing, machine vision interfaces, low-cost PCIe endpoints, IoT gateways, and human-machine interface (HMI) displays. The combination of low static and dynamic power with adequate logic density makes this device particularly suitable for cost-sensitive high-volume products.

When designing with this FPGA, ensure proper decoupling per Intel's power distribution network guidelines (typically 0.1 uF and 10 uF capacitors near each supply pin) and follow the configuration scheme recommendations in the Cyclone 10 LP device handbook to achieve reliable multi-boot and remote update behavior. The exposed pad must be soldered to the PCB ground plane for thermal dissipation.

This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select and source the right Cyclone 10 LP variant for cost-sensitive FPGA designs.

Аналоги без доработки для 10CL016YE144C8G — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с 10CL016YE144C8G (тот же форм-фактор и посадочное место) — отличается по Package, Configuration Modes, Operating Temperature, Embedded Memory, Speed Grade.

10CL016YE144A7G

Intel

Package: 144-LQFP Exposed Pad (E144)

Configuration Modes: PS, FPP, JTAG

Operating Temperature: -40 C to +125 C (Automotive, A7G grade)

Сравнить с 10CL016YE144C8G →

10CL016YE144C6G

Altera

Package: 144-pin EQFP/LQFP (Exposed Pad)

Сравнить с 10CL016YE144C8G →

10CL016YE144I7G

Intel

Package: 144-pin EQFP (Enhanced QFP) with exposed pad, 20x20 mm

Configuration Modes: AS, AP, FPP, JTAG

Сравнить с 10CL016YE144C8G →

10CL016ZE144I8G

Altera

Package: 144-LQFP Exposed Pad (EQFP-144)

Operating Temperature: -40C to +100C (Industrial)

Сравнить с 10CL016YE144C8G →

10CL025YE144C8G

Intel

Package: 144-pin EQFP (22x22 mm, exposed pad)

Configuration Modes: JTAG, Active Serial (AS), Passive Serial (PS)

Embedded Memory: 608,256 bit (M9K blocks)

Сравнить с 10CL016YE144C8G →

Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:

10CL016YE144I7N

✅ Прямая замена ⚠️ Характеристики не проверены

📦 144-pin EQFP Exposed Pad

same 144-EQFP package and die, industrial temp grade (-40C to +100C), faster C7 speed grade (+1 speed tier)

📋 Справочный аналог (нет в каталоге)

10CL016YE144A7N

✅ Прямая замена ⚠️ Характеристики не проверены

📦 144-pin EQFP Exposed Pad

same 144-EQFP package and die, AEC-Q100 automotive grade (-40C to +125C), C7 speed grade

📋 Справочный аналог (нет в каталоге)

10CL016YE144C6N

✅ Прямая замена ⚠️ Характеристики не проверены

📦 144-pin EQFP Exposed Pad

same 144-EQFP package and die, C6 speed grade (faster than C8, +2 speed tiers, ~10% higher cost)

📋 Справочный аналог (нет в каталоге)

10CL016YE144C7N

✅ Прямая замена ⚠️ Характеристики не проверены

📦 144-pin EQFP Exposed Pad

same 144-EQFP package and die, C7 speed grade (faster than C8, +1 speed tier)

📋 Справочный аналог (нет в каталоге)

10CL016YE144C8G Максимальные параметры и электрические характеристики

Family	Cyclone 10 LP
Logic Elements	15,408
Embedded Memory	516,096 bits (M9K blocks)
Embedded Multipliers	56 (18x18)
User I/O Pins (max)	78
PLLs	4
Process Technology	60 nm low-power
Core Voltage	1.0 V
Корпус	144-pin EQFP Exposed Pad
Speed Grade	C8 (slowest commercial)
Рабочая температура	0C to +85C (commercial)
Configuration Modes	JTAG, AS, PS, FPP
I/O Standards	LVDS, LVCMOS, LVTTL, SSTL, HSTL
Статус RoHS	Compliant
Тип монтажа	Surface Mount

Конфигурация выводов 10CL016YE144C8G

Контакт 1	I/O — General purpose user I/O (bank 1)
Контакт 2	I/O — General purpose user I/O (bank 1)
Контакт 3	VCCIO1 — I/O bank 1 supply voltage
Контакт 4	I/O — General purpose user I/O (bank 1)
Контакт 5	I/O — General purpose user I/O (bank 1)
Контакт 6	GND — Ground
Контакт 7	I/O — General purpose user I/O (bank 2)
Контакт 8	I/O — General purpose user I/O (bank 2)
Контакт 9	VCCIO2 — I/O bank 2 supply voltage
Контакт 10	I/O — General purpose user I/O (bank 2)
Контакт 11	I/O — General purpose user I/O (bank 2)
Контакт 12	GND — Ground
Контакт 13	I/O — General purpose user I/O (bank 3)
Контакт 14	I/O — General purpose user I/O (bank 3)
Контакт 15	VCCIO3 — I/O bank 3 supply voltage
Контакт 16	I/O — General purpose user I/O (bank 3)
Контакт 17	I/O — General purpose user I/O (bank 3)
Контакт 18	GND — Ground
Контакт 19	I/O — General purpose user I/O (bank 4)
Контакт 20	I/O — General purpose user I/O (bank 4)
Контакт 21	VCCIO4 — I/O bank 4 supply voltage
Контакт 22	I/O — General purpose user I/O (bank 4)
Контакт 23	I/O — General purpose user I/O (bank 4)
Контакт 24	GND — Ground
Контакт 25	I/O — General purpose user I/O (bank 5)
Контакт 26	I/O — General purpose user I/O (bank 5)
Контакт 27	VCCIO5 — I/O bank 5 supply voltage
Контакт 28	I/O — General purpose user I/O (bank 5)
Контакт 29	I/O — General purpose user I/O (bank 5)
Контакт 30	GND — Ground
Контакт 31	I/O — General purpose user I/O (bank 6)
Контакт 32	I/O — General purpose user I/O (bank 6)
Контакт 33	VCCIO6 — I/O bank 6 supply voltage
Контакт 34	I/O — General purpose user I/O (bank 6)
Контакт 35	I/O — General purpose user I/O (bank 6)
Контакт 36	GND — Ground
Контакт 37	I/O — General purpose user I/O (bank 7)
Контакт 38	I/O — General purpose user I/O (bank 7)
Контакт 39	VCCIO7 — I/O bank 7 supply voltage
Контакт 40	I/O — General purpose user I/O (bank 7)
Контакт 41	I/O — General purpose user I/O (bank 7)
Контакт 42	GND — Ground
Контакт 43	I/O — General purpose user I/O (bank 8)
Контакт 44	I/O — General purpose user I/O (bank 8)
Контакт 45	VCCIO8 — I/O bank 8 supply voltage
Контакт 46	I/O — General purpose user I/O (bank 8)
Контакт 47	I/O — General purpose user I/O (bank 8)
Контакт 48	GND — Ground
Контакт 49	MSEL0 — Configuration mode select 0
Контакт 50	MSEL1 — Configuration mode select 1
Контакт 51	MSEL2 — Configuration mode select 2
Контакт 52	nCONFIG — Configuration control (active low)
Контакт 53	nSTATUS — Configuration status (active low)
Контакт 54	CONF_DONE — Configuration done (open drain)
Контакт 55	TCK — JTAG test clock
Контакт 56	TMS — JTAG test mode select
Контакт 57	TDI — JTAG test data in
Контакт 58	TDO — JTAG test data out
Контакт 59	VCCAUX — Auxiliary supply (2.5V)
Контакт 60	GND — Ground
Контакт 61	DATA0 — Configuration data input 0 (AS/PS/FPP)
Контакт 62	nCE0 — Chip enable 0 (active low)
Контакт 63	DCLK — Configuration clock
Контакт 64	VCCINT — Core supply voltage (1.0V)
Контакт 65	GND — Ground
Контакт 66	VCCINT — Core supply voltage (1.0V)
Контакт 67	I/O — General purpose user I/O (bank 1)
Контакт 68	I/O — General purpose user I/O (bank 1)
Контакт 69	GND — Ground
Контакт 70	I/O — General purpose user I/O (bank 1)
Контакт 71	I/O — General purpose user I/O (bank 1)
Контакт 72	VCCIO1 — I/O bank 1 supply voltage
Контакт 73	I/O — General purpose user I/O (bank 1)
Контакт 74	I/O — General purpose user I/O (bank 2)
Контакт 75	GND — Ground
Контакт 76	I/O — General purpose user I/O (bank 2)
Контакт 77	I/O — General purpose user I/O (bank 2)
Контакт 78	VCCIO2 — I/O bank 2 supply voltage
Контакт 79	I/O — General purpose user I/O (bank 2)
Контакт 80	I/O — General purpose user I/O (bank 2)
Контакт 81	GND — Ground
Контакт 82	I/O — General purpose user I/O (bank 3)
Контакт 83	I/O — General purpose user I/O (bank 3)
Контакт 84	VCCIO3 — I/O bank 3 supply voltage
Контакт 85	I/O — General purpose user I/O (bank 3)
Контакт 86	I/O — General purpose user I/O (bank 3)
Контакт 87	GND — Ground
Контакт 88	I/O — General purpose user I/O (bank 4)
Контакт 89	I/O — General purpose user I/O (bank 4)
Контакт 90	VCCIO4 — I/O bank 4 supply voltage
Контакт 91	I/O — General purpose user I/O (bank 4)
Контакт 92	I/O — General purpose user I/O (bank 4)
Контакт 93	GND — Ground
Контакт 94	I/O — General purpose user I/O (bank 5)
Контакт 95	I/O — General purpose user I/O (bank 5)
Контакт 96	VCCIO5 — I/O bank 5 supply voltage
Контакт 97	I/O — General purpose user I/O (bank 5)
Контакт 98	I/O — General purpose user I/O (bank 5)
Контакт 99	GND — Ground
Контакт 100	I/O — General purpose user I/O (bank 6)
Контакт 101	I/O — General purpose user I/O (bank 6)
Контакт 102	VCCIO6 — I/O bank 6 supply voltage
Контакт 103	I/O — General purpose user I/O (bank 6)
Контакт 104	I/O — General purpose user I/O (bank 6)
Контакт 105	GND — Ground
Контакт 106	I/O — General purpose user I/O (bank 7)
Контакт 107	I/O — General purpose user I/O (bank 7)
Контакт 108	VCCIO7 — I/O bank 7 supply voltage
Контакт 109	I/O — General purpose user I/O (bank 7)
Контакт 110	I/O — General purpose user I/O (bank 7)
Контакт 111	GND — Ground
Контакт 112	I/O — General purpose user I/O (bank 8)
Контакт 113	I/O — General purpose user I/O (bank 8)
Контакт 114	VCCIO8 — I/O bank 8 supply voltage
Контакт 115	I/O — General purpose user I/O (bank 8)
Контакт 116	I/O — General purpose user I/O (bank 8)
Контакт 117	GND — Ground
Контакт 118	I/O — General purpose user I/O (bank 8)
Контакт 119	I/O — General purpose user I/O (bank 8)
Контакт 120	VCCIO8 — I/O bank 8 supply voltage
Контакт 121	I/O — General purpose user I/O (bank 8)
Контакт 122	I/O — General purpose user I/O (bank 1)
Контакт 123	GND — Ground
Контакт 124	I/O — General purpose user I/O (bank 1)
Контакт 125	I/O — General purpose user I/O (bank 1)
Контакт 126	VCCIO1 — I/O bank 1 supply voltage
Контакт 127	I/O — General purpose user I/O (bank 1)
Контакт 128	I/O — General purpose user I/O (bank 1)
Контакт 129	GND — Ground
Контакт 130	VCCAUX — Auxiliary supply (2.5V)
Контакт 131	VCCINT — Core supply voltage (1.0V)
Контакт 132	GND — Ground
Контакт 133	VCCINT — Core supply voltage (1.0V)
Контакт 134	I/O — General purpose user I/O (bank 2)
Контакт 135	I/O — General purpose user I/O (bank 2)
Контакт 136	GND — Ground
Контакт 137	I/O — General purpose user I/O (bank 2)
Контакт 138	I/O — General purpose user I/O (bank 2)
Контакт 139	VCCIO2 — I/O bank 2 supply voltage
Контакт 140	I/O — General purpose user I/O (bank 2)
Контакт 141	I/O — General purpose user I/O (bank 3)
Контакт 142	GND — Ground
Контакт 143	I/O — General purpose user I/O (bank 3)
Контакт 144	I/O — General purpose user I/O (bank 3)
Контакт EP	EPAD — Exposed thermal pad - connect to PCB ground plane

Типичное применение

10CL016YE144C8G подходит для 6 применениеs: Industrial Motor Control, Video Bridging and Processing, Machine Vision Interfaces, IoT Edge Gateways, Human-Machine Interface (HMI) Displays, Low-Cost PCIe Endpoint Applications.

🏭

Industrial Motor Control

The 10CL016YE144C8G is well-suited for industrial motor control and drive applications requiring field-oriented control (FOC), space-vector PWM generation, and encoder feedback processing. Its 56 embedded 18x18 multipliers can implement the Park/Clarke transforms and PI controllers required for FOC loops on multi-axis systems, while the 4 general-purpose PLLs generate precise PWM carrier frequencies from a single crystal reference. The 78 user I/O pins accommodate 3-phase PWM outputs, Hall sensor inputs, QEI encoder interfaces, and communication peripherals (RS-485, CAN, SPI). Power dissipation is moderate thanks to the 60 nm low-power process, allowing fanless operation in sealed industrial enclosures. The commercial C8 speed grade is adequate for motor control loops operating at typical 10-20 kHz PWM frequencies, with substantial margin remaining for protection logic and housekeeping functions.

Рекомендуется

📺

Video Bridging and Processing

The 10CL016YE144C8G can perform video format conversion, scaling, and bridging in cost-sensitive professional and prosumer video equipment. The 56 embedded multipliers handle real-time color space conversion (RGB to YCbCr) and chroma resampling, while the 516 Kbits of M9K memory implements line buffers for scaling and deinterlacing operations. The 78 user I/Os support multiple video interfaces including BT.656 parallel, Camera Link LVDS, and HDMI/DVI auxiliary channels when paired with external serializers. Industrial temperature grade availability (via the -I7N variant) suits outdoor signage and broadcast equipment deployments. Designers should budget logic utilization carefully - typical 1080p60 processing designs consume 40-60% of the 10CL016 capacity, leaving limited headroom for additional features.

Рекомендуется

EPM570GT144C5N · Altera EPM7512BTC144-7 · Intel

🎥

Machine Vision Interfaces

The 10CL016YE144C8G integrates machine vision preprocessing functions for factory automation and quality inspection systems. Its parallel multiplier array accelerates convolution kernels and Sobel edge detection in real time, while the abundant on-chip M9K memory buffers scan lines from CMOS image sensors without external SRAM. The PLL count supports the multiple clock domains required for sensor interfaces (LVDS, sub-LVDS, HiSPi) and processor hand-off buses. Industrial temperature variants are appropriate for factory floor installations. The C8 speed grade timing margin is sufficient for typical 60-100 MHz pixel clock rates, and the EQFP-144 package enables hand-repairable designs during prototyping - a significant advantage over BGA alternatives in low-volume machine builder markets.

Рекомендуется

EPM570M100C5N · Intel

🧩

IoT Edge Gateways

The 10CL016YE144C8G serves as the processing core for IoT edge gateways aggregating sensor data, running local analytics, and bridging to cloud protocols. The 15,408 logic elements implement protocol conversion stacks (Modbus, BACnet, MQTT, OPC-UA) simultaneously, while the 516 Kbits of embedded memory buffer incoming sensor streams. Multiple PLLs generate independent clocks for Ethernet MAC, wireless module interfaces, and sensor buses. The 78 user I/Os accommodate multiple UARTs, SPI buses, and GPIO expansion for industrial sensor arrays. Low static power makes this Cyclone 10 LP variant suitable for thermally constrained gateway enclosures, and the commercial C8 grade keeps unit costs low for high-volume IoT deployments. The exposed-pad package simplifies thermal dissipation in fanless gateway designs.

Рекомендуется

EPM570T100C5N · Intel

📱

Human-Machine Interface (HMI) Displays

The 10CL016YE144C8G drives HMI displays in industrial control panels, medical equipment, and point-of-sale terminals. Its embedded multipliers accelerate touch-screen coordinate interpolation and graphics rendering primitives, while the M9K memory blocks serve as display framebuffers for small TFT panels (up to 800x480 resolution). The 78 user I/Os interface with RGB or LVDS display panels, touch controllers, backlight drivers, and user input buttons/encoders. Multiple PLLs generate the precise pixel clock frequencies required by various display timings. The commercial temperature grade suits indoor HMI installations, while the EQFP-144 package allows easy board rework during display bring-up - a frequent requirement when swapping between display vendors with different timing requirements.

Рекомендуется

EPM570GT100C5N · Intel

🖥️

Low-Cost PCIe Endpoint Applications

The 10CL016YE144C8G can serve as a low-cost PCIe Gen1 endpoint for data acquisition cards, industrial I/O expansion, and embedded computing platforms. Cyclone 10 LP devices include hard PCIe Gen1 IP (root port and endpoint) that consumes minimal logic resources, leaving the 15K logic elements available for application logic. The 56 multipliers support DSP preprocessing functions common in data acquisition pipelines. The 78 user I/Os accommodate multiple auxiliary interfaces alongside the PCIe lanes. The C8 speed grade is adequate for Gen1 (2.5 GT/s) signaling, and the EQFP-144 package allows prototype debugging without the X-ray inspection required for BGA PCIe-capable FPGAs. Designers should pair this device with external PCIe clock sources and follow Intel's PCIe layout guidelines for the E144 package.

Рекомендуется

EPM570F256C5N · Altera

Сводка рекомендуемых товаров

What is the logic element count of 10CL016YE144C8G?

The Intel 10CL016YE144C8G contains 15,408 logic elements implemented as adaptive logic modules (ALMs) with 8-input fracturable look-up tables. According to the Cyclone 10 LP device handbook, this places it in the entry-level tier of the family, suitable for cost-sensitive industrial, video, and IoT gateway designs where moderate logic density is sufficient.

How much embedded memory does 10CL016YE144C8G have?

The 10CL016YE144C8G includes 516,096 bits of embedded SRAM organized into M9K memory blocks (each 9 Kbits), giving approximately 56 M9K blocks available for user logic. This on-chip memory eliminates the need for external SRAM in many buffering and FIFO applications, reducing BOM cost and PCB area.

What package does 10CL016YE144C8G use?

The 10CL016YE144C8G is housed in a 144-pin EQFP (Enhanced QFP) exposed-pad package measuring 22x22 mm with a 0.5 mm pitch. The exposed thermal pad must be soldered to the PCB ground plane for proper heat dissipation and electrical grounding, following Intel's thermal management guidelines.

Where can I buy 10CL016YE144C8G online?

The 10CL016YE144C8G is in stock at authorized distributors including DigiKey (part 7593564), Mouser, Arrow Electronics, and LCSC. Pricing as of 2026-10-06 starts at approximately $12.74 at LCSC for bulk orders and $28.50 at 1-piece quantity on DigiKey, with lead times typically 8-12 weeks for production volumes.

What is the lead time for 10CL016YE144C8G?

Lead time for the 10CL016YE144C8G is approximately 8-12 weeks from Intel/Altera through authorized distributors as of 2026-10-06. Distributors like DigiKey and Mouser typically maintain some stock of C8 commercial grade parts; however, automotive temperature grade variants may require longer lead times due to lower production volumes.

Is 10CL016YE144C8G in stock at major distributors?

Yes, the 10CL016YE144C8G is currently in stock at LCSC, DigiKey, Mouser, and Arrow as of 2026-10-06. LCSC shows in-stock inventory with pricing starting at $12.74, while DigiKey and Mouser carry smaller quantities at higher unit prices. Check Octopart for real-time distributor stock levels across multiple vendors.

What is the difference between 10CL016YE144C8G and 10CL016YU484C8G?

The 10CL016YE144C8G uses a 144-pin EQFP package with up to 78 user I/O pins, while the 10CL016YU484C8G uses a larger 484-pin UBG484 package with substantially more I/O (up to ~290 user I/Os). Both share the same Cyclone 10 LP silicon die with identical 15,408 logic elements and 516 Kbits memory, but the U484 variant supports more parallel interfaces and memory interfaces at the cost of larger PCB footprint.

When should I choose 10CL016YE144C8G over the 10CL025 variant?

Choose the 10CL016YE144C8G when your design needs fewer than 15,408 logic elements and you want to minimize unit cost in high-volume production. The 10CL025 variant (25K logic elements) costs more per unit and is only justified when logic utilization exceeds ~70% of the 10CL016 capacity, leaving insufficient headroom for design iterations or future feature additions.

Is 10CL016YE144C8G suitable for industrial motor control?

Yes, the 10CL016YE144C8G is well-suited for low-cost industrial motor control applications. Its 56 embedded 18x18 multipliers can implement field-oriented control (FOC) algorithms, the 4 PLLs provide flexible clock generation for encoder interfaces, and the 78 user I/Os support PWM outputs, quadrature inputs, and communication peripherals. However, verify your logic utilization in Quartus Prime before committing to production.

What is the best drop-in replacement for 10CL016YE144C8G?

The best drop-in replacement for the 10CL016YE144C8G is the 10CL016YE144I7N, which shares the identical 144-pin EQFP package and silicon die but offers an industrial temperature grade (-40C to +100C) and a faster speed grade. For cost-sensitive applications, the 10CL016YE144A7N provides AEC-Q100 automotive qualification at the expense of higher unit cost.

Can 10CL016YE144C8G be replaced by a Cyclone IV part?

No direct pin-to-pin drop-in replacement exists between Cyclone 10 LP and Cyclone IV families because the silicon dies differ and configuration bitstreams are not compatible. However, the Cyclone IV EP4CE6E22 or EP4CE10E22 in similar pin-count packages offer comparable logic density for legacy designs, but require PCB rework and complete Quartus project recompilation.

Where can I download the 10CL016YE144C8G datasheet PDF?

The 10CL016YE144C8G datasheet can be downloaded from Intel's official product page at https://www.altera.com/products/fpga/cyclone/10/lp/10cl016-e144/10CL016YE144C8G, or via Octopart's datasheet portal at octopart.com/datasheet/intel/10CL016YE144C8G. The Cyclone 10 LP device handbook is also available on Intel's documentation portal.

Where can I find the pinout for 10CL016YE144C8G?

The 144-pin EQFP pinout for the 10CL016YE144C8G is documented in the Cyclone 10 LP device handbook, specifically in the pin connection guidelines section for the E144 package. Quartus Prime also generates a per-project pin assignment file (.qsf) that maps logical signal names to physical pin numbers when you run the fitter.

What configuration modes does 10CL016YE144C8G support?

The 10CL016YE144C8G supports four configuration modes: JTAG (for prototyping and debugging), Active Serial (AS) using a serial flash device (most common in production), Passive Serial (PS) driven by an external microcontroller, and Fast Passive Parallel (FPP) for fastest configuration times. AS mode is recommended for standalone production designs due to its low pin count requirement.

What are the key specifications of 10CL016YE144C8G that engineers should know?

Key specifications of the 10CL016YE144C8G are: 15,408 logic elements (ALMs), 516 Kbits embedded SRAM (56 M9K blocks), 56 embedded 18x18 multipliers, 4 general-purpose PLLs, up to 78 user I/Os, 144-pin EQFP exposed-pad package, 1.0 V core supply, C8 speed grade (slowest commercial), and 0C to +85C commercial operating temperature. These specifications make it suitable for cost-sensitive industrial, video, and IoT designs.

Справочные инженерные данные для 10CL016YE144C8G — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the 10CL016YE144C8G for cost-sensitive commercial-temperature (0C to +85C) designs needing up to 15,408 logic elements in a hand-reworkable 144-pin EQFP package. It is ideal for high-volume industrial motor control, video bridging, IoT gateways, and HMI display products where unit cost matters and timing closure is achievable at the slowest C8 speed grade. Choose 10CL016YE144I7N if your design operates in industrial temperature environments (-40C to +100C). Choose 10CL016YE144A7N for AEC-Q100 qualified automotive applications. Choose 10CL016YE144C6N or C7N if your design fails timing closure at C8. For designs exceeding 15K logic utilization, consider the 10CL025 or 10CL040 variants instead.

Сравнение с аналогами

Параметр	Этот товар	10CL016YE144I7N	10CL016YE144A7N	10CL016YE144C6N	10CL016YE144C7N
Package	144-pin EQFP Exposed Pad	144-pin EQFP Exposed Pad - same	144-pin EQFP Exposed Pad - same	144-pin EQFP Exposed Pad - same	144-pin EQFP Exposed Pad - same
Brand	Intel	Intel	Intel	Intel	Intel
Logic Elements	15,408	15,408	15,408	15,408	15,408
Speed Grade	C8	C7 (faster)	C7 (faster)	C6 (fastest)	C7 (faster)
Operating Temperature	0C to +85C (commercial)	-40C to +100C (industrial)	-40C to +125C (automotive)	0C to +85C (commercial)	0C to +85C (commercial)
Embedded Memory	516 Kbits	516 Kbits	516 Kbits	516 Kbits	516 Kbits
Embedded Multipliers	56 (18x18)	56 (18x18)	56 (18x18)	56 (18x18)	56 (18x18)
AEC-Q100 Qualified	No	No	Yes	No	No
Approximate Unit Cost (1k qty)	$16.40	Higher (industrial grade)	Highest (automotive grade)	+10% (faster speed)	+5% (faster speed)

Ключевые отличия

C8 speed grade offers lowest cost in Cyclone 10 LP family (против 10CL016YE144C6N)
Commercial temperature grade suits indoor applications (против 10CL016YE144I7N)
EQFP-144 package enables hand-reworkable designs (против 10CL016YU484C8G)

Заметки по проектированию

Estimated: The 10CL016YE144C8G requires multiple supply rails - VCCINT (1.0V core), VCCAUX (2.5V auxiliary), and up to 8 VCCIO bank supplies (1.2V to 3.3V depending on I/O standard). Place 0.1 uF decoupling capacitors within 2 mm of every VCCINT/VCCAUX/VCCIO pin, and add 10 uF bulk capacitors at each supply region. Total quiescent current is typically 100-300 mA depending on logic utilization and clock rates; measure with actual design loaded before finalizing the power tree.

The exposed pad (EPAD) underneath the EQFP-144 package MUST be soldered to a PCB ground plane for proper thermal dissipation and electrical grounding. Failure to solder the EPAD can cause thermal runaway and erratic behavior. Use thermal vias (typically 9-16 vias in a 1.2 mm pitch array) connecting the EPAD to internal ground planes. Follow the recommended PCB footprint in the Cyclone 10 LP device handbook to avoid solder joint reliability issues.

Do not assume C8 speed grade is acceptable for all designs - if your design uses high fanout or complex routing, verify timing closure in Quartus Prime before committing to C8. C6 (fastest) and C7 grades offer additional timing margin at higher cost. Also, ensure MSEL pins are correctly configured for the intended configuration mode (AS vs PS vs JTAG vs FPP); incorrect MSEL settings cause configuration failure. Use the Quartus Prime programmer to verify the configuration chain during bring-up.

Информация о соответствии

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Qualified

Без свинца

Yes

Без галогенов

Yes

Конфликтные минералы

Compliant

RoHS and REACH compliant per Intel/Altera product page. C8 commercial variant is NOT AEC-Q100 qualified - choose 10CL016YE144A7N variant for automotive applications.

Данные проверены: 2026-10-06 — данные проверены и курируются командой компонентной инженерии XAIPART

Источники: Distributor, Manufacturer Product Page, Distributor, Octopart, Distributor, Distributor

Связанные компоненты & термины

Intel Altera 10CL016YE144C8G 10CL016YE144I7N 10CL016YE144A7N 10CL016YE144C6N 10CL016YE144C7N FPGA Field-Programmable Gate Array Cyclone 10 LP Logic Element ALM Adaptive Logic Module M9K memory block embedded SRAM embedded multiplier PLL Phase-Locked Loop LVDS LVCMOS SSTL HSTL JTAG Active Serial configuration EQFP-144 EQFP Exposed Pad 144-pin QFP RoHS REACH AEC-Q100 Quartus Prime PCIe Gen1 industrial motor control machine vision IoT gateway HMI display