Интегральные схемы

TLV271CD

TLV271CD - 3 MHz, 16 V Low-Power RRO Op Amp | Texas Instruments

The Texas Instruments TLV271CD is a single, 16 V, 3 MHz CMOS operational amplifier with rail-to-rail output, 550 µA supply current per channel, and an 8-pin SOIC package. Its specified supply range is 2.7 V to 16 V, while its 3 MHz gain-bandwidth product and 2.4 V/µs slew rate support responsive signal conditioning. Designed as a low-power alternative to the TLC27x family, it suits systems that require output swing close to the supply rails without a higher-bandwidth amplifier. An operational amplifier is a voltage-controlled differential amplifier whose high open-loop gain makes closed-loop amplification practical when negative feedback defines the gain and bandwidth. The TLV271 belongs to the operational-amplifier, analog-amplifier, and semiconductor hierarchy. Its rail-to-rail output stage lets the output approach either supply rail under suitable load conditions, improving usable swing in low-voltage systems. The CMOS implementation also supports low power consumption, although total supply current depends on supply voltage, output activity, and load. The TLV27x family combines a 3 MHz bandwidth with 550 µA of supply current per channel and a 2.4 V/µs slew rate. According to the Texas Instruments manufacturer datasheet, the devices operate from 2.7 V to 16 V over an extended industrial temperature range of -40 °C to +125 °C. The verified search data identifies the TLV271CD as the commercial-grade 8-SOIC ordering variant. Its low quiescent current is valuable in battery-powered instrumentation, while its 3 MHz bandwidth is more useful than a micropower unity-gain-stable amplifier when moderate closed-loop bandwidth is required. The amplifier's architecture is suitable for voltage buffers, current-sensing interfaces, sensor amplification, and general-purpose analog filtering. Rail-to-rail output operation is especially relevant when the signal must use much of the available supply range. Designers should still check input common-mode range, output load, capacitive-load stability, and noise specifications in the manufacturer datasheet rather than assuming that rail-to-rail output also means rail-to-rail input. Stable feedback ratios and conservative capacitive loading help prevent oscillation. Typical uses include portable measurement systems, industrial sensor interfaces, low-voltage audio or communication blocks, active filters, and embedded control. The 3 MHz bandwidth allows higher closed-loop bandwidth than very-low-frequency precision amplifiers, while the 550 µA-per-channel current keeps demand modest. At low supply voltages, usable swing and input range become important design limits; at high frequencies, board parasitics and probe loading can materially alter observed performance. For implementation, bypass each supply pin with local decoupling and route feedback traces away from input and output nodes. Avoid placing large capacitive loads directly at the output unless the datasheet stability limits are checked. The main engineering trade-off is the combination of low power, moderate 3 MHz bandwidth, and single-supply rail-to-rail output: TLV271CD is not automatically interchangeable with op amps having different input architecture, noise, or compensation. This page consolidates the verified manufacturer specifications, distributor availability links, practical design notes, and explicitly qualified alternatives for engineers evaluating the TLV271CD in analog signal-chain designs.

Запрос цены Контакты

TLV271ID

TLV271ID - 3MHz Low-Power RRO Op Amp | Texas Instruments

Texas Instruments TLV271ID is a single 16 V, 3 MHz CMOS operational amplifier with rail-to-rail output, 550 uA/channel supply current, and a 2.4 V/us slew rate, housed in an 8-pin SOIC package. Its operating supply range is 2.7 V to 16 V, and its extended industrial temperature range is -40 C to +125 C. An operational amplifier is an analog signal-conditioning semiconductor that uses high open-loop gain to amplify voltage differences in feedback-based circuits. The TLV271 belongs to the operational-amplifier, analog-amplifier, and signal-conditioning hierarchy. Its rail-to-rail output enables the output stage to approach the supply rails more closely than a conventional output stage, while CMOS construction supports low power consumption and operation from low single-supply voltages. The TLV271 combines 3 MHz gain-bandwidth product with 2.4 V/us slew rate and 550 uA/channel supply current. Its input noise voltage is 550 nV/Hz, and the verified product data identifies a 39 nV/Hz input-bias-current figure. The device is intended for low-power, wide-bandwidth signal paths operating across a 2.7 V to 16 V supply range. The TLV27x family provides rail-to-rail output swing and a minimum operating supply voltage of 2.7 V. This architecture is useful in portable instrumentation, sensor interfaces, buffer stages, and general-purpose analog signal conditioning where a low-noise, low-power amplifier is preferred. The TLV271ID uses the D suffix package configuration identified in the verified distributor data as an 8-pin SOIC. Typical applications include portable measurement, low-side current sensing, sensor buffers, audio and communication interfaces, and industrial control modules. In a current-sense amplifier, the op amp amplifies the small voltage generated across a shunt resistor; its 3 MHz bandwidth and rail-to-rail output support useful signal range. In a sensor buffer, low supply current helps preserve limited power budgets. When designing around the TLV271ID, verify input common-mode behavior, output swing, load requirements, and stability for the selected feedback network. Decoupling capacitors should be placed close to the supply pins, and the PCB should minimize loop area to reduce supply-noise coupling. The TLV271 family is identified by Texas Instruments as an active product family, with final orderable-grade and lifecycle status checked against current manufacturer data. This page combines verified manufacturer and distributor information with a focused selection guide, application context, design notes, and qualified replacement discussion. It is intended to help engineers identify whether the TLV271ID fits a 2.7 V-to-16 V, low-power, rail-to-rail-output analog design.

Запрос цены Контакты

TLV271IP

TLV271IP - 16V, 3MHz Rail-to-Rail Op Amp | Texas Instruments

The Texas Instruments TLV271IP is a single operational amplifier designed for low-power signal-conditioning systems, with a 16 V maximum supply voltage, 3 MHz gain-bandwidth product, and 550 µA per-channel supply current. Its rail-to-rail output capability allows the output to approach both supply rails, making it suitable for instrumentation, buffering, and low-voltage analog systems. The device is supplied in an 8-pin PDIP package. An operational amplifier is a voltage-controlled voltage-source device used to amplify the difference between two input voltages. In a practical signal chain, it can provide gain, impedance buffering, filtering, level shifting, or active feedback control. The TLV271 family is positioned as a low-power, general-purpose amplifier family for applications that require more bandwidth than very-low-power micropower parts while keeping supply current modest. The TLV271IP provides one amplifier per package. The verified manufacturer and distributor information identifies a 3 MHz bandwidth, 2.4 V/µs typical slew rate, 2.4 V minimum supply voltage, 16 V maximum supply voltage, 550 µA typical supply current, and input noise voltage of 39 nV/√Hz. The amplifier has rail-to-rail output operation, while the supplied data identifies a 39 nV/√Hz input noise voltage and an input bias current specification reaching 1 pA. These characteristics make it appropriate for sensor interfaces, analog measurement chains, buffering, and low-power embedded systems. Typical circuit use places the TLV271IP in non-inverting or inverting amplifier configurations, voltage followers, transimpedance front ends, and active filters. Because the output is rail-to-rail, the device can maximize usable signal range in low-voltage systems, although the exact output swing depends on load current and supply voltage. Its 3 MHz bandwidth enables higher-frequency signal paths than a slow precision amplifier, while the 550 µA supply current helps control power use in battery-powered or space-constrained equipment. The principal design consideration is supply and signal-headroom planning. The input common-mode range, output swing, load capability, noise performance, and stability requirements should be checked against the manufacturer datasheet for the selected supply and temperature conditions. Decoupling capacitors should be placed close to the power pins, and unused input pins must be handled according to the datasheet recommendations. The provided web data identifies the device as a CMOS amplifier in an 8-PDIP package, but detailed electrical limits and complete pin functions are not included in the supplied records. This product data combines the verified Texas Instruments and distributor listings, identifies the TLV271IP as a 16 V, 3 MHz, rail-to-rail-output single op amp, and separates documented specifications from parameters that require confirmation in the full manufacturer datasheet. It also records commercially relevant package and application information for engineers comparing low-power operational amplifiers. The TLV271IP is positioned for instrumentation, buffer, and general-purpose analog designs where a single amplifier, low-power operation, and rail-to-rail output are useful. It can serve as a building block in sensor signal conditioning, portable measurement equipment, industrial control interfaces, and embedded analog signal paths.

Запрос цены Контакты

TLV272CD

TLV272CD - Dual 3MHz 16V Rail-to-Rail Op Amp | Texas Instruments

The Texas Instruments TLV272CD is a dual, general-purpose operational amplifier with a 16 V maximum supply, 3 MHz gain-bandwidth product, 2.4 V/us slew rate, and rail-to-rail output in an 8-SOIC package. Each channel is designed for low-power signal conditioning while maintaining useful bandwidth for general-purpose analog systems. An operational amplifier is a high-gain analog building block used to amplify, buffer, compare, or integrate signals. The TLV272 belongs to the voltage-feedback operational-amplifier hierarchy and combines a wide supply range, low channel current, and rail-to-rail output capability. Rail-to-rail output allows the output to approach the positive or negative supply limit more closely than a conventional output stage, improving dynamic range in low-voltage systems. Verified device characteristics include 550 uA per channel, 3 MHz bandwidth, 2.4 V/us slew rate, 2.7 V to 16 V operating supply range, 39 nV/Hz input-noise density, and input bias current specified as low as 1 pA. The family is positioned for portable instrumentation, sensor interfaces, audio paths, and general signal conditioning where dual-channel operation reduces package count. The wide supply range supports both conventional 5 V analog systems and higher-voltage rails, while the 3 MHz bandwidth supports signals beyond audio-band precision-only applications. The 2.4 V/us slew rate helps preserve large-signal response, although the exact output amplitude, load, and frequency must be checked against the manufacturer datasheet before final sizing. Typical uses include low-power sensor interfaces, buffered analog measurements, audio voltage buffers, active filtering, and general dual-channel conditioning. The SOIC-8 package is suitable for conventional surface-mount PCB assembly, but pin numbering and electrical limits must be verified against the exact TLV272 datasheet. A key design consideration is that low power and moderate bandwidth do not eliminate the need for stable reference and feedback networks. Place bypass capacitors near the supply pins, use short feedback paths, and verify common-mode, output-swing, noise, and stability requirements against the application. This page consolidates verified manufacturer and distributor information with design-oriented guidance; unsupported details remain explicitly marked for review.

Запрос цены Контакты

TLV272ID

TLV272ID - Dual 16V 3MHz R-R Op Amp | Texas Instruments

The Texas Instruments TLV272ID is a dual, 16 V, 3 MHz rail-to-rail output operational amplifier packaged in an 8-pin SOIC. It uses approximately 550 uA per channel and is specified for operation from 2.7 V to 16 V over a -40 C to +125 C temperature range. These headline values position it as a compact, low-power amplifier for general-purpose analog signal conditioning. An operational amplifier is an active analog component that amplifies the voltage difference between its differential inputs while using negative feedback to set closed-loop gain, filtering, or integration behavior. Within the hierarchy of integrated circuits, the TLV272 belongs to the operational-amplifier class, then to voltage-feedback amplifiers, analog ICs, and ultimately semiconductor signal-conditioning devices. Rail-to-rail output allows the output voltage to approach the supply limits at its rated operating conditions. Key verified characteristics include a 3 MHz gain-bandwidth product, dual-amplifier configuration, 550 uA supply current per channel, 16 V maximum supply rating, and rail-to-rail output operation. The 3 MHz bandwidth supports higher-frequency signal paths than very-low-bandwidth micropower amplifiers, while the 550 uA per-channel current supports battery-conscious designs. The -40 C to +125 C grade is suitable for industrial temperature requirements when the complete circuit is qualified for those conditions. The TLV272ID combines two independent amplifiers in one SOIC-8, reducing board area compared with two separate single-channel packages. Its operating characteristics are relevant for sensor interfaces, audio paths, filtering, and general voltage amplification. However, the provided web data does not specify input offset voltage, input bias current, noise density, output-current capability, or input common-mode range, so these values must be confirmed in the manufacturer datasheet before precision design. Typical uses include low-frequency audio amplification, buffered sensor outputs, active filters, and portable measurement circuits. When operating from a 2.7 V supply, engineers must confirm that output swing, input range, and load requirements remain acceptable at the selected signal amplitudes. The 16 V maximum rating does not by itself establish safe operation at every intermediate rail or temperature combination. The main PCB consideration is decoupling. Place input and output-conditioning components close to their associated pins, route feedback loops compactly, and provide stable supply bypassing. Stable operation also depends on the required common-mode and output ranges, load impedance, feedback topology, and output-current demand. This page combines verified manufacturer and distributor information with explicit data gaps, practical application guidance, and conservative sourcing. It is intended to speed engineering evaluation while avoiding unsupported claims about parameters not present in the retrieved records.

Запрос цены Контакты

TLV272IP

TLV272IP - Dual 16V 3MHz R-R Op Amp | Texas Instruments

The Texas Instruments TLV272IP is a dual, 16 V, 3 MHz operational amplifier with rail-to-rail output swing, supplied in an 8-pin PDIP package. It provides two amplifier channels, a 2.4 V/us slew rate, 550 uA/channel supply current and a 2.7 V to 16 V total supply range. The device is intended for low-power, wide-bandwidth signal conditioning where rail-to-rail output capability improves usable output range. An operational amplifier is an analog integrated circuit that uses high-gain differential feedback to amplify voltage signals. The TLV272IP belongs to the operational-amplifier hierarchy and is appropriate for sensor interfaces, buffer stages, filters, audio paths and general-purpose analog signal chains. Its rail-to-rail output is useful when the amplifier must approach the positive or negative supply rail while retaining a defined output voltage. The main performance features are 3 MHz gain-bandwidth product, 2.4 V/us slew rate, 550 uA/channel supply current and 39 nV/Hz input noise voltage. The verified family information also specifies operation from 2.7 V to 16 V, with commercial and extended-temperature options in the broader TLV27x family. Because the TLV272IP is a dual device, one package can support two independent analog channels. The PDIP package is through-hole and therefore useful for prototypes, educational designs, repair assemblies and applications where leaded parts are preferred over surface-mount packages. Its 8-pin arrangement matches the dual-op-amp pinout convention, but the exact pin names and electrical limits must be confirmed against the manufacturer datasheet before final PCB release. The verified sources identify the TLV272IP as a dual rail-to-rail-output operational amplifier in an 8-PDIP package. Typical uses include low-voltage sensor buffering, portable instrumentation, audio preamplification, active filtering and industrial control signal conditioning. The 3 MHz bandwidth provides more signal bandwidth than a strictly low-frequency precision amplifier, while the 550 uA/channel current supports battery-conscious designs. The tradeoff is that the PDIP footprint is larger and less compact than an equivalent surface-mount package. For PCB design, place input and output components close to the relevant pins and maintain a common ground reference. Decoupling capacitors should be placed at the power pins to control supply impedance and high-frequency noise. Confirm stability, input common-mode range, output-load limits and supply current in the final circuit rather than relying only on the headline bandwidth and slew-rate figures. This product record combines verified manufacturer and distributor information with explicitly marked data gaps, practical application guidance and sourcing-oriented search terms. It is intended to help engineers identify the correct package, assess whether TLV272IP fits a signal-chain requirement and locate the manufacturer datasheet before committing to a design.

Запрос цены Контакты

TLV274CD

TLV274CD - 3 MHz Quad 16 V Operational Amplifier | TI

The Texas Instruments TLV274CD is a quad, 16 V, 3 MHz operational amplifier with rail-to-rail output capability, housed in a 14-pin SOIC package. The verified product data identifies a 550 µA-per-channel supply current, 2.4 V/µs slew rate, 2.7 V to 16 V supply operation, and a commercial temperature range identified by the CD ordering code. It is designed for general-purpose analog signal conditioning where low power, moderate bandwidth, and rail-to-rail output are useful. An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify voltage differences between its input terminals. The TLV274 belongs to the operational-amplifier, analog-amplifier, and signal-conditioning IC hierarchy. Its four amplifiers in one package make it suitable for multi-channel systems, while rail-to-rail output helps the output approach the supply rails and improves dynamic range in low-voltage designs. The verified data lists 3 MHz bandwidth, 2.4 V/µs slew rate, 16 V maximum supply voltage, 550 µA per channel, and 550 µA/channel input-noise-related information. The wide supply range supports portable, industrial, test, and measurement systems. The low power per channel is useful when four amplifiers must operate continuously, while the 3 MHz bandwidth is more appropriate for general-purpose signal paths than precision low-frequency instrumentation alone. The TLV274CD uses a 14-pin SOIC package and is offered through distributors including DigiKey, Mouser, LCSC, and Octopart. The verified DigiKey result identifies it as a standard general-purpose amplifier with four circuits and rail-to-rail output. Because the available data does not provide complete pin names, exact electrical limits, or validated drop-in alternatives, those details are marked as needed rather than guessed. Typical uses include low-frequency sensor interfaces, buffered analog measurement chains, current or voltage signal conditioning, audio preamplifier stages, and general embedded control systems. Keep the input common-mode range, output swing, load, supply voltage, and stability requirements within the manufacturer datasheet limits, and account for input bias current, noise, and capacitive loading. For PCB design, place the bypass capacitor close to the supply pins and keep analog input and output routing short. Avoid excessive capacitive loading at the output and verify stability with the selected feedback network. This page combines verified manufacturer and distributor information with practical design guidance; confirm final electrical and mechanical details against the official TI datasheet before release.

Запрос цены Контакты

TLV274ID

TLV274ID - Quad 16V 3MHz RRO Op Amp | Texas Instruments

The Texas Instruments TLV274ID is a quad, general-purpose operational amplifier with 16 V supply capability, 3 MHz gain-bandwidth product, and rail-to-rail output operation in a 14-SOIC package. Each of its four channels draws 550 uA nominal supply current and supports a 2.4 V to 16 V supply range, making the device suitable for compact, low-power analog signal chains. An operational amplifier is an active analog component that uses high open-loop gain to amplify the difference between two input voltages. The TLV274 belongs to the operational-amplifier hierarchy and combines rail-to-rail output swing with a relatively high 3 MHz bandwidth. That balance is useful for signal conditioning, filtering, buffering, and general instrumentation where low supply current and usable high-frequency response matter. Key characteristics include four independent amplifiers in one package, rail-to-rail output, 3 MHz bandwidth, 2.4 V/us slew rate, and 550 uA/channel supply current. The reported input-voltage noise density is 39 nV/sqrt(Hz), while input bias current reaches as low as 1 pA in the characterized operating range. These values support low-level signal work, although input offset voltage, input common-mode range, and output-current limits were not supplied in the verified data. The TLV274ID is based on a rail-to-rail-output amplifier architecture rather than a rail-to-rail-input design. Designers must therefore verify that input signals remain inside the allowed common-mode region. Its 3 MHz bandwidth enables moderate-frequency feedback networks and sensing loops, but stability should be checked against output loading, capacitance, noise gain, and filter topology. Typical uses include low-power sensor conditioning, audio and communication interfaces, current measurement, data acquisition, filtering, and embedded analog control. Placing four amplifiers in one SOIC can reduce package count, but adjacent channels may share supply and thermal conditions. Decoupling and grounding therefore remain important when driving successive signals. Begin each supply rail with suitable local bypass capacitance and route high-current return paths away from sensitive analog inputs. Because the exact compensation recommendations and electrical limits are unavailable in the supplied source set, use the manufacturer datasheet for final gain, load, stability, and layout validation. This page combines verified product facts, application guidance, procurement context, and a conservative comparison of documented family variants. Its added value is an engineering-focused explanation of where the TLV274ID fits without treating unavailable electrical limits as assumptions.

Запрос цены Контакты

TLV274IN

TLV274IN - 3MHz Quad Rail-to-Rail Op Amp | Texas Instruments

The Texas Instruments TLV274IN is a four-circuit, general-purpose operational amplifier with a 3 MHz gain-bandwidth product, 2.4 V to 16 V supply-voltage range, and rail-to-rail output operation. It is packaged in a 14-pin PDIP and is intended for low-power signal conditioning across industrial, instrumentation, and embedded systems. The verified source data identifies 550 µA of supply current per channel, 2.4 V/µs slew rate, 39 nV/Hz input-noise voltage density, and specified operation from 0°C to 70°C. An operational amplifier is an analog building block that uses high open-loop gain to amplify the difference between two input voltages. Within the signal-chain hierarchy, the TLV274IN belongs to the operational-amplifier, analog-amplifier, and semiconductor categories. Rail-to-rail output capability allows the output to approach the positive or negative supply rail under suitable load conditions, while the wide supply range supports single-supply and dual-supply systems. Key features include four amplifiers in one package, a 3 MHz bandwidth, 2.4 V/µs slew rate, 550 µA per-channel supply current, 39 nV/Hz input-voltage-noise density, and 1 pA input-bias current over the specified temperature range. The low-power bias current is useful when preserving sensor signals and reducing loading, while the 3 MHz bandwidth supports higher-frequency signal paths and active filtering. The TLV274IN is based on a voltage-feedback amplifier architecture, as identified in the verified comparison data. In a typical application, one channel is used for amplification, another for buffering, and the remaining channels for filtering or instrumentation. Its rail-to-rail output supports low-voltage systems where the signal must use much of the available supply range. Typical applications include sensor-interface circuits, data-acquisition signal chains, low-frequency filters, buffered analog controls, portable instrumentation, and embedded measurement systems. The 16 V maximum supply makes it suitable for systems operating below industrial transient voltages, provided the design does not exceed the device rating. When laying out a TLV274IN board, keep the unused amplifier inputs biased to a valid common-mode level and place input and feedback components close to the relevant pins. Check the required output swing, load, stability, and supply-bypass requirements against the manufacturer datasheet before committing the design.

Запрос цены Контакты

TLV2888IDGKR

TLV2888IDGKR - 36V 14MHz Zero-Drift Dual Op Amp | TI

The Texas Instruments TLV2888IDGKR is a dual, zero-drift, CMOS precision operational amplifier designed for 36V systems and mux-friendly analog front ends. It combines a 14MHz gain-bandwidth product with a 40V/us slew rate and low 7.5nV/sqrtHz noise, making it one of the fastest zero-drift op amps available in an 8-VSSOP (DGK) package. The I-grade supports the -40C to +125C industrial temperature range, and the DGKR suffix indicates tape-and-reel packaging. A zero-drift operational amplifier uses auto-zero or chopper techniques to continuously cancel input offset voltage and thermal drift. In the system hierarchy: zero-drift op amp -> precision operational amplifier -> operational amplifier -> amplifier IC -> analog semiconductor. The TLV2888 belongs to the TLVx888 family (TLV888 single, TLV2888 dual, TLV4888 quad), optimized for applications needing both low DC error and wide signal bandwidth. Key features from the TI datasheet (TLVx888, Rev. B) include 3uV typical offset voltage, 0.01uV/C typical drift, and 150dB PSRR and 150dB CMRR. The input common-mode range extends to the negative rail and the output swings rail-to-rail, maximizing dynamic range on single supplies up to 36V. The mux-friendly input architecture minimizes charge-injection transients when inputs are switched, which is critical for multiplexed data-acquisition front ends feeding SAR or delta-sigma ADCs. The 14MHz bandwidth and 40V/us slew rate support fast sampled signals while preserving near-zero DC offset - a combination that distinguishes the TLV2888 from slower zero-drift amplifiers such as the OPA2187. Typical applications include multiplexed industrial data acquisition, high-precision sensor conditioning, motor-control current sensing, and servo or valve control loops where a 36V rail is available. Low offset and drift allow direct connection to precision ADCs like the ADS1220 without a separate auto-zero stage, and 150dB CMRR preserves accuracy across high common-mode voltages. Design tip: keep feedback resistors low enough to limit Johnson noise, decouple the supply pins close to the VSSOP-8 package, and avoid large capacitive loads on the output unless datasheet stability criteria are followed, or chopper ripple may increase. Pricing shown is indicative as of 2026-08-30.

Запрос цены Контакты

TLV2888IDGKR-Q1

TLV2888IDGKR-Q1 - Dual 36V 14MHz Zero-Drift Op Amp | TI

The Texas Instruments TLV2888IDGKR-Q1 is an automotive-qualified, dual-channel, zero-drift (chopper-stabilized) CMOS precision operational amplifier rated for 36V operation with a 14MHz gain bandwidth product, supplied in an 8-pin VSSOP (DGK) package. It belongs to the TLVx888 family (TLV888, TLV2888, TLV4888) of wide-bandwidth, low-noise, mux-friendly op amps. A zero-drift operational amplifier is a precision amplifier architecture that periodically self-corrects its input offset voltage using chopper stabilization or auto-zero techniques. Within the amplifier hierarchy, it sits under operational amplifiers, precision amplifiers, and analog signal-conditioning ICs, delivering DC accuracy that conventional CMOS or bipolar op amps cannot achieve without trimming. Key features include a maximum input offset voltage of only 15uV, a maximum offset drift of 0.05uV/C over the wide temperature range, rail-to-rail I/O operation, and a very high slew rate with fast settling time enabled by the wide 14MHz bandwidth. The mux-friendly input design minimizes channel-switching glitches when the amplifier follows an analog multiplexer, a common requirement in automotive battery-management and sensor-multiplexed front ends. Architecturally, the TLV2888 uses a zero-drift CMOS core that suppresses 1/f noise and offset through internal auto-correction, combining the DC precision of chopper amplifiers with the wide AC bandwidth of a fast CMOS output stage. This makes it effective both as a precision DC amplifier and as a high-speed signal-chain buffer. Typical applications include automotive battery management systems, current-sense amplification after a shunt (pair with INA-family monitors), multiplexed sensor front ends driving ADCs, and industrial precision signal conditioning. The 36V rating tolerates automotive load-dump-adjacent rail conditions. Design consideration: zero-drift amplifiers generate internal chopping ripple; follow the TI datasheet layout recommendations and verify settle time when driving switched-capacitor ADC inputs. Price references are as of 2026-08-29.

Запрос цены Контакты

TLV3011AIDCKR

TLV3011AIDCKR - 5µA Open-Drain Comparator w/ 1.24V Ref | SC70-6 | TI

The Texas Instruments TLV3011AIDCKR is a micropower comparator with an integrated 1.242 V series voltage reference, packaged in a 6-pin SC-70 (DCK) footprint. It is an open-drain output variant of the TLV3011 family with a maximum quiescent current of 5 µA, input common-mode range that extends 200 mV beyond both supply rails, and single-supply operation from 1.8 V to 5.5 V. The on-chip voltage reference exhibits low 100 ppm/°C drift over temperature, making the part suitable for battery-monitoring and threshold-detection circuits where a stable reference is required without an external Zener or shunt. A comparator is an analog building block that compares two input voltages and produces a digital logic output indicating which one is larger. The TLV3011 family belongs to the open-drain comparator hierarchy, where the output transistor only sinks current and requires an external pull-up resistor to the desired logic rail. This contrasts with push-pull comparators like the TLV3012, which actively drive both high and low. Open-drain comparators are preferred when level-shifting is needed between logic domains, when wired-OR logic combining multiple comparator outputs is desired, or when the output must swing above VCC. Key features include 5 µA maximum quiescent current, 1.242 V reference with 100 ppm/°C drift, internal hysteresis for clean switching, and propagation delay in the microsecond range suitable for low-speed monitoring. The SC-70-6 package measures approximately 2.0 x 1.25 mm, allowing placement in space-constrained wearables, IoT sensor nodes, and portable battery-management boards. The wide input common-mode range (rail-to-rail minus 200 mV margin) supports monitoring of signals at or near the supply rails, which simplifies battery-voltage detection in single-cell Li-ion systems down to 3.0 V cut-off. Typical applications include battery voltage monitoring, window comparators for over-voltage/under-voltage detection, threshold detectors in portable medical devices, industrial sensor alarms, and simple relaxation oscillators. The internal reference enables a single-chip solution for generating a fixed threshold without adding external shunt regulators. When designing with this part, choose the external pull-up resistor on OUT to match the desired logic-rail rise time and current; 100 kΩ to 1 MΩ values are typical. Ensure the reference output capacitor (if used at REF pin) is sized to filter reference noise without slowing response. The open-drain output allows combining multiple TLV3011 outputs for wired-OR fault signalling in redundant-supply monitor circuits. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

TLV316QDBVRQ1

TLV316QDBVRQ1 - 10MHz RRIO Op Amp, AEC-Q100, SOT-23-5 | TI

The Texas Instruments TLV316QDBVRQ1 is an automotive-grade, single-channel, 10-MHz, rail-to-rail input/output (RRIO) CMOS operational amplifier in a 5-pin SOT-23 (DBV) package. It operates from 1.8 V to 5.5 V single supply, delivers 10 MHz gain-bandwidth product, 400 µA/channel quiescent current, and 12 nV/√Hz input voltage noise density at 1 kHz, making it a strong general-purpose low-voltage op amp for cost-sensitive signal chains. An operational amplifier (op amp) is a high-gain DC-coupled differential amplifier that uses external feedback to set its closed-loop behavior - gain, bandwidth, input impedance, and output impedance. Op amps form the fundamental building blocks of analog signal conditioning: inverting/non-inverting amplifiers, active filters, integrators, comparators, transimpedance amplifiers, and current/voltage buffers. Within the broader signal-chain taxonomy, general-purpose CMOS op amps sit between low-power chopper/zero-drink amplifiers and high-speed current-feedback op amps, optimized for portable, battery-powered, and automotive sensor-interface applications. Key features of the TLV316QDBVRQ1 include rail-to-rail input common-mode range that includes both supply rails, rail-to-rail output swing within tens of millivolts of either rail, 1.8 V minimum supply enabling direct Li-ion/cell operation, 400 µA typical quiescent current per channel, and 12 nV/√Hz voltage noise density at 1 kHz. AEC-Q100 Grade 1 qualification (-40 °C to +125 °C ambient), HBM ESD Class 3A, and CDM ESD Class C5 ratings make it suitable for under-hood and cabin automotive modules. Internally the device uses a CMOS input stage that supports true rail-to-rail common-mode operation without the crossover-distortion artifacts of legacy bipolar RRIO parts. The 10-MHz gain-bandwidth product combined with 6 V/µs typical slew rate provides sufficient speed for moderate-bandwidth sensor conditioning, audio pre-amplification, and active filter stages at audio frequencies. Typical applications include automotive sensor signal conditioning (current-shunt monitors, thermistor bridges, pressure/temperature transducers), body and chassis ECUs, infotainment audio pre-amplifiers, low-side/battery current sensing, and portable/mobile precision buffers. The wide supply range also supports industrial 3.3 V and 5 V PLC analog input modules. When designing with this op amp, place a 0.1 µF decoupling capacitor within a few millimeters of the supply pin, use a feedback network that keeps total gain above the minimum stable gain of 1 V/V (unity), and observe the input common-mode range - although RRIO, the input stage shifts distortion performance near the rails, so biasing the input mid-supply preserves linearity. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical PCB design notes that go beyond the manufacturer datasheet to accelerate automotive and industrial analog front-end design decisions.

Запрос цены Контакты

TLV3201AIDCKR

TLV3201AIDCKR - 40ns microPOWER Comparator, SC-70-5 | Texas Instruments

The Texas Instruments TLV3201AIDCKR is a single-channel, 40 ns microPOWER push-pull comparator in a 5-pin SC-70 (DCK) package, drawing only 40 µA of quiescent current. It features rail-to-rail input common-mode range, 1 mV typical input offset voltage, and a wide 2.7 V to 5.5 V single-supply operating range. The push-pull CMOS output stage delivers large output drive current without requiring an external pull-up resistor. A comparator is an analog circuit building block that compares two input voltages and forces its output to one of two logic states based on which input is larger. The TLV3201 belongs to the high-speed, low-power comparator sub-category of analog comparators, which sits within amplifiers/comparators -> analog ICs -> signal conditioning -> power management. This combination of 40 ns propagation delay and 40 µA supply current places the part at the high-speed / low-power boundary, making it attractive for battery-powered systems that also need fast overvoltage detection or threshold-crossing response. Key features include 40 ns propagation delay (typical), 40 µA quiescent current, rail-to-rail input common-mode range that can swing 200 mV below the negative rail, push-pull CMOS output capable of driving typical CMOS or TTL loads directly, internal hysteresis for clean switching in noisy environments, and an industrial -40 °C to +125 °C operating temperature range. The small SC-70-5 (2.0 × 2.1 mm) footprint enables compact designs for space-constrained applications. The TLV3201 is built on a CMOS process with a precision input stage that achieves 1 mV input offset while maintaining microamp quiescent current. The push-pull output eliminates the static current draw of an open-drain pull-up resistor, improving efficiency in battery-powered systems. The wide 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V rails commonly used in industrial and consumer designs. Typical applications include battery management threshold detection, zero-crossing detectors for line-powered systems, oscillator circuits, window comparators, IR receiver signal conditioning, and general-purpose analog monitoring. The part is particularly well suited for portable and handheld equipment where the 40 µA supply current extends battery life while the 40 ns speed supports fast fault response. When designing with this comparator, account for input source impedance and bias current to limit offset-induced errors. For high-speed switching above 100 kHz, add local supply decoupling (0.1 µF ceramic in parallel with 1 µF bulk) within 5 mm of the VCC pin. The internal 6 mV hysteresis is sufficient for most noisy environments, but for very slow-moving inputs add external positive feedback to widen the hysteresis band. This page synthesizes distributor pricing, drop-in alternatives in the same SC-70-5 footprint, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

TLV3202AQDGKRQ1

TLV3202AQDGKRQ1 - 40ns Dual Automotive Comparator | TI

The Texas Instruments TLV3202AQDGKRQ1 is a dual, high-speed, low-power automotive comparator with 40 ns propagation delay, a 40 µA per-channel quiescent current, and rail-to-rail inputs in an 8-VSSOP DGK package. It operates from a single 2.7 V to 5.5 V supply and supports an ambient operating-temperature range of -40 °C to 125 °C. The device is designed for fast threshold decisions where response time, low power, and compact placement matter. A comparator is a differential signal integrated circuit that compares two input voltages and switches its logic output according to their relationship. In the broader semiconductor hierarchy, this dual analog comparator belongs to the comparator, interface IC, and signal-conditioning categories. The TLV3202-Q1 family combines rail-to-rail input capability, 1 mV offset voltage, push-pull outputs, and large output-drive capability, making it useful for signal conditioning, threshold detection, and system monitoring. The most important verified features are 40 ns high-speed response, 40 µA low-power operation, rail-to-rail input, 1 mV offset voltage, and large output drive current. Its two channels share one package, reducing board area for paired decisions. The push-pull output can drive downstream digital logic directly, while the low-power operating current helps preserve system power budget in continuously monitoring designs. The automotive-oriented Q1 designation also makes the device appropriate for temperature-qualified vehicle systems when its specified operating range and qualification requirements are satisfied. The TLV3202AQDGKRQ1 is supplied in an 8-VSSOP DGK surface-mount package. Its compact footprint is suitable for dense industrial, automotive, communications, and embedded-control designs. The package and pin configuration must be compared directly against the original PCB footprint before substitution; a similar comparator function alone does not guarantee drop-in compatibility. The manufacturer product page identifies the device as a dual comparator with eight pins and a -40 °C to 125 °C temperature range. Typical applications include automotive battery and signal monitoring, industrial threshold detection, sensor conditioning, overvoltage and undervoltage indication, waveform edge detection, and general-purpose digital decision logic. The fast 40 ns response helps minimize uncertainty when a signal crosses the comparator threshold, while the low-power characteristic is advantageous in battery-powered or continuously active systems. Designers should verify input common-mode limits, output logic levels, supply decoupling, and unused-channel handling against the manufacturer datasheet. Place the device near the sensed signal where practical, maintain a stable reference node, and route high-current or switching nodes away from comparator inputs. This page combines the verified manufacturer and distributor information with engineering guidance, application context, and a conservative replacement assessment.

Запрос цены Контакты

TLV320AC37CN

TLV320AC37CN - 3V Voice-Band Audio Processor | Texas Instruments

The TLV320AC37CN is a voice-band audio processor (VBAP) from Texas Instruments, designed for single 3-V operation with low power consumption. It integrates a combined A/D, D/A converter and filters, supporting sample rates up to 16 kHz and a pass-band to 7.2 kHz. The device is housed in a 20-pin PDIP package, making it suitable for through-hole assembly in telecommunication and audio applications. A voice-band audio processor (VBAP) is a specialized mixed-signal IC that combines analog-to-digital and digital-to-analog conversion with filtering and signal processing optimized for the 300 Hz to 3.4 kHz voice band. It sits within the broader category of audio codecs, which are essential in telephony, intercoms, and voice-controlled systems. The TLV320AC37CN specifically targets low-power, battery-operated voice applications, offering a complete analog front-end and codec in a single package. Key features include a low operating power of 20 mW typical, standby mode at 5 mW, and power-down mode at 2 mW. The device supports extended variable-frequency operation with sample rates up to 16 kHz and a pass-band to 7.2 kHz. It includes an electret microphone interface, making it ideal for direct connection to electret condenser microphones. The combined A/D, D/A, and filters simplify system design by reducing external components. Technically, the TLV320AC37CN employs a CMOS process and operates from a single 3-V supply, which is critical for portable and battery-powered equipment. The device features a PCM codec interface with A-law companding, suitable for digital telephony standards. The through-hole PDIP-20 package ensures easy prototyping and manual assembly, though it limits high-density applications compared to surface-mount alternatives. Typical applications include digital telephone answering machines, speakerphones, intercom systems, and voice recorders. The low power consumption and 3-V operation make it particularly suited for battery-powered devices where efficiency is paramount. The integrated filters and codec reduce BOM cost and board space. When designing with this device, ensure proper decoupling of the 3-V supply and careful layout of the analog and digital sections to minimize noise coupling. The device is now obsolete, so consider pin-compatible alternatives for new designs.

Запрос цены Контакты

TLV320AIC3105IRHBR

TLV320AIC3105IRHBR - Low-Power Stereo Audio CODEC | Texas Instruments

The Texas Instruments TLV320AIC3105IRHBR is a low-power stereo audio CODEC with 6 single-ended inputs, 6 outputs, an integrated stereo headphone amplifier, and enhanced digital effects, housed in a 32-pin VQFN (RHB) 5x5 mm package. It integrates stereo 24-bit ADC and DAC paths with a PCM digital interface (I2S/left-/right-justified DSP/PCM) for portable audio and telephony designs. What is a stereo audio CODEC? A CODEC (coder-decoder) combines an analog-to-digital converter (ADC) and digital-to-analog converter (DAC) in a single device, supporting both microphone-record and headphone/speaker-playback paths. In the system hierarchy, the CODEC sits between the application processor (which runs audio software) and the analog transducers (microphones and speakers), translating between the digital audio stream and real-world acoustic signals. Stereo means two independent channels (left + right), as opposed to mono. Key features include a wide range of programmable I/O gain stages, single-ended or fully-differential output configurations, integrated PLL for flexible clock generation, and extensive register-based power control. The headphone amplifier provides ground-centered output for capless headphone connection, reducing BOM cost and PCB area. Programmable 3D, bass boost, and treble/midrange digital effects are executed inside the DSP core, offloading the host processor. Architecturally, the TLV320AIC3105 uses multi-bit sigma-delta ADCs and DACs with low-latency digital filters for natural audio reproduction. Three separate supply rails (analog 2.7V-3.6V, digital core 1.525V-1.95V, digital I/O 1.1V-3.6V) allow direct connection to a 1.8V host processor I/O while keeping the analog section on a clean 3.3V rail, which improves dynamic range and reduces digital switching noise coupling into the audio path. Typical applications include portable media players, smartphones, Bluetooth/USB audio dongles, headphone amplifiers, dictation/recording devices, and VoIP headsets. The wide input gain range and microphone biasing make it equally suited to handset and headset use cases; the small 5x5 mm QFN footprint enables compact wearable form factors. A common design tip is to keep the analog supply decoupling star-grounded to the headphone return path to minimize click/pop on enable transitions. The vendor recommends sequencing the analog supply before the digital I/O supply to avoid latch-up and to use the built-in PGA soft-mute ramps during power-up/power-down. This page synthesizes XAIPART pricing, drop-in alternatives, and practical design notes that complement - but do not replace - the manufacturer datasheet.

Запрос цены Контакты

TLV320AIC3106IRGZT

TLV320AIC3106IRGZT - Low-Power Stereo Audio CODEC | TI

The Texas Instruments TLV320AIC3106IRGZT is a low-power stereo audio CODEC with 10 inputs, 7 outputs, integrated headphone amplifier, and enhanced digital effects, housed in a 48-pin VQFN (RGZ) 7x7 mm package. It supports 16/20/24/32-bit PCM data at sample rates from 8 kHz to 96 kHz with 102 dBA signal-to-noise ratio on the DAC path, and operates from a 1.8 V digital supply plus a 3.3 V analog supply, consuming as little as 15 mW during stereo 48 kHz DAC playback. An audio CODEC (coder-decoder) is an integrated circuit that converts between digital audio streams and analog microphone/line/headphone signals, combining an ADC input path and DAC output path inside a single chip. The TLV320AIC3106 sits in the broader hierarchy of audio interface ICs -> interface ICs -> integrated circuits, and is widely deployed in portable, battery-powered, and space-constrained designs where low power, stereo playback, and integrated headphone drive are required simultaneously. Multiple line, microphone, and headphone amplifiers share an extensive register-based power-control interface, enabling fine-grained energy management as system use cases change. Key features of the TLV320AIC3106 include stereo 24-bit ADC and DAC with 102 dBA SNR, integrated 40 mW headphone amplifier, programmable 3D / bass / treble / EQ digital effects, and selectable single-ended or fully-differential analog inputs. The digital serial audio bus supports I2S, left-justified, right-justified, and DSP/PCM modes for flexible connection to virtually any application processor or DSP. An automatic gain control (AGC) block on the ADC path keeps microphone levels stable across varying speech distances. At the architectural level the device pairs a multi-bit delta-sigma modulator front end with on-chip FIR and IIR engine blocks so that tone control, EQ, and de-emphasis are applied digitally without burdening the host processor. PLL-based clock generation accepts common 12, 13, 24, or 27 MHz system clocks and derives all internal timing from them, simplifying board layout by removing the need for a dedicated audio master crystal in many designs. Extensive register-based power control keeps unused analog blocks powered down until audio paths are activated. Typical applications span portable media players, portable navigation devices, mobile phones and VoIP handsets, portable gaming, digital still cameras and camcorders, ultrasonic imaging, IP phones and USB headsets, as well as portable audio docks and Bluetooth speakers. The combination of low power, integrated headphone drive, and rich on-chip digital effects makes it equally suitable for stereo playback and full-duplex voice-capture products. When designing with this part, ensure both the 1.8 V digital and 3.3 V analog rails are well decoupled close to the IC, and that the PLL reference clock is selected to match the chosen MCLK frequency in software. Because the device supports both single-ended and differential microphone paths, designers should populate the unused input pins according to the datasheet reference circuit rather than leaving them floating. This page synthesizes distributor pricing, drop-in alternatives, and practical design considerations for the TLV320AIC3106IRGZT and its sibling variants into a single design-oriented reference beyond the raw manufacturer datasheet.

Запрос цены Контакты

TLV320AIC3110IRHBT

TLV320AIC3110IRHBT - Low-Power Audio Codec with Class-D Amp | TI

The TLV320AIC3110IRHBT is a low-power, highly integrated audio codec from Texas Instruments, featuring a stereo audio DAC and a mono audio ADC, along with a 1.3W stereo Class-D speaker amplifier. It supports 32-bit audio data and communicates via I2C or serial interface. The device is housed in a 32-pin VQFN (5x5 mm) package, making it suitable for space-constrained portable applications. An audio codec is a device that encodes and decodes digital audio data, converting between analog and digital domains. It typically includes ADCs and DACs, along with signal processing and amplification stages. In a system hierarchy, an audio codec sits between the digital audio processor (e.g., DSP or SoC) and the analog audio output (speakers, headphones) or input (microphones). It is a critical component in portable electronics, automotive infotainment, and IoT devices. Key features of the TLV320AIC3110 include a 1.3W stereo Class-D speaker amplifier, which provides high efficiency for battery-powered devices. The device supports a wide analog supply range of 2.7V to 3.6V, a digital core supply of 1.525V to 1.95V, and a digital I/O supply of 1.1V to 3.6V. It also includes a programmable digital sine-wave generator and extensive register-based power control for optimizing power consumption. Technically, the TLV320AIC3110 integrates a low-power stereo DAC with 32-bit resolution and a mono ADC, supporting sample rates up to 96 kHz. The Class-D amplifier delivers 1.3W per channel into 8 ohms with low distortion. The device features a 5x5 mm VQFN package with exposed thermal pad for improved heat dissipation. It operates over the industrial temperature range of -40°C to +85°C. Typical applications include portable audio players, smartphones, tablets, and IoT devices requiring high-quality audio playback and recording. The integrated Class-D amplifier eliminates the need for an external amplifier, reducing BOM cost and board space. The I2C control interface allows easy integration with microcontrollers and DSPs. When designing with this device, ensure proper decoupling of the analog and digital supplies, and place the Class-D amplifier output filters close to the device to minimize EMI. The thermal pad should be soldered to a copper pour for effective heat dissipation.

Запрос цены Контакты

TLV342ID

TLV342ID - Dual 5.5V 2.2MHz RRO Op Amp | Texas Instruments

The Texas Instruments TLV342ID is a dual, low-voltage CMOS operational amplifier with rail-to-rail output swing, 5.5 V maximum supply capability, and 2.2 MHz gain-bandwidth performance. The device is supplied in an 8-pin SOIC package and provides two amplifiers per package, making it suitable for compact dual-channel signal-conditioning designs. The verified product information identifies the TLV342 as a low-voltage, low-power, rail-to-rail-output CMOS operational amplifier family. A CMOS operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages while using high-impedance inputs and CMOS-compatible low-power characteristics. The TLV342 family belongs to the broader operational-amplifier hierarchy: op amp -> analog IC -> amplifier IC. Its rail-to-rail output architecture is useful when the usable signal range must extend close to the positive or negative supply rail, while the low-voltage operation suits battery-powered, portable, industrial-control, sensor-interface, and low-voltage signal-chain systems. Verified manufacturer information states that the TLV34xx family includes low-voltage, low-power devices with rail-to-rail output swing. The supplied family data also identifies PMOS input-stage characteristics including 1 pA typical input bias current and 0.3 mV typical offset voltage, although those figures should be checked against the specific ordering information and grade. The TLV342ID is identified as a dual circuit in 8-SOIC, while the family also includes single and dual variants. The product page describes the TLV342 as a dual 5.5 V, 2.2 MHz operational amplifier. Typical applications include low-voltage sensor conditioning, buffered analog measurements, audio and communication signal paths, current-loop interfaces, and general-purpose dual-amplifier circuits. The SOIC package provides a familiar surface-mount footprint, but the exact pin names and electrical limits must be taken from the manufacturer datasheet before layout or replacement qualification. Because the available verified snippets do not provide the complete price schedule, pin table, package drawing, or all electrical limits, those fields are marked as data needed rather than inferred. For robust design practice, verify the supply-voltage range, input common-mode range, output swing, unity-gain stability, input capacitance, shutdown behavior, and exposed thermal conditions in the applicable Texas Instruments datasheet. Do not treat rail-to-rail output as proof that the input common-mode range reaches either supply rail. Confirm the exact TLV342ID pinout and PCB land pattern before substituting any part. This page combines verified product descriptions, source links, application guidance, and explicit data gaps to support engineering comparison without fabricating unavailable specifications.

Запрос цены Контакты

TLV3701IDBVR

TLV3701IDBVR - Nanopower Push-Pull Comparator | Texas Instruments

The Texas Instruments TLV3701IDBVR is a single-channel nanopower push-pull comparator in a 5-pin SOT-23 (DBV) package, drawing only 560 nA per channel of supply current. It operates from a 2.7 V to 16 V single supply and features an input common-mode range that exceeds both supply rails by 200 mV, with 18 V reverse-battery protection on the inputs. A comparator is an analog circuit that compares two input voltages and produces a digital output indicating which is larger; the push-pull CMOS output stage of the TLV3701 drives a rail-to-rail logic level without an external pull-up resistor. As a member of the comparator family within the broader signal-chain IC hierarchy, the TLV3701 belongs to the nanopower class, designed specifically for ultra-low quiescent current applications where battery life is paramount. Key features include 560 nA quiescent current per channel, a typical propagation delay of 22 microseconds at 5 V, 18 V input tolerance with reverse-battery protection, and CMOS push-pull output capable of driving standard CMOS or TTL loads directly. The device also integrates ESD protection cells on the pins exceeding 2 kV HBM, and the SOT-23-5 package occupies only 2.9 mm x 1.6 mm of board area, enabling high-density PCB layouts. Technically, the TLV3701 uses a CMOS architecture with an internal bandgap reference for the threshold, an input stage tolerant of rail-to-rail common-mode swings, and a symmetrical push-pull output driver. The slow 22 us propagation delay is the deliberate trade-off for achieving sub-microamp quiescent current; the part is not suited for high-speed signal conditioning but is engineered for monitoring tasks that change state infrequently. Typical applications include battery voltage monitoring in wireless sensor nodes, low-frequency threshold detection in portable medical devices, micropower window comparators, system reset supervision, and battery-powered security sensors. The wide 2.7-16 V supply range also makes it suitable for industrial 24 V (nominal) line monitoring when divided down by external resistors. When designing with this device, place a 0.1 uF bypass capacitor within 2 mm of the VCC pin and minimize input trace lengths to reduce parasitic coupling. The slow propagation means it should not be used in fast closed-loop control, but for monitoring battery voltage or generating wake-up signals in IoT devices, the 560 nA supply current is the headline advantage. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page, giving engineers an actionable comparison set for nanopower comparator selection.

Запрос цены Контакты

TLV376IDBVR

TLV376IDBVR - 5.5MHz RRIO Op Amp | Texas Instruments | Precision

The Texas Instruments TLV376IDBVR is a 5.5-MHz, 100-µV offset, 8-nV/√Hz noise, 815-µA precision operational amplifier in a 5-pin SOT-23 package, built on TI's e-trim technology. It features rail-to-rail input and rail-to-rail output (RRIO) operation, 5.5-MHz gain-bandwidth product, 2-V/µs slew rate, and 1.2-mA quiescent current. The device operates from a single supply of 2.25 V to 5.5 V (or ±1.125 V to ±2.75 V). An operational amplifier (op amp) is a high-gain DC-coupled electronic voltage amplifier with differential inputs and a single-ended output, used as the fundamental building block of analog signal conditioning. Within the broader taxonomy, op amps belong to linear integrated circuits -> amplifiers -> analog ICs -> semiconductors. The TLV376 specifically sits in the precision low-noise sub-category, optimized for dc accuracy plus moderate-speed ac performance - bridging the gap between zero-drift instrumentation amps and general-purpose CMOS op amps. Key features include 125-µV maximum input offset voltage, 8-nV/√Hz input voltage noise density at 1 kHz, 5.5-MHz unity-gain bandwidth, 2-V/µs slew rate, and rail-to-rail input and output swing. The e-trim trim architecture achieves dc precision comparable to chopper-stabilized parts without the chopping artifacts, while keeping the noise floor low enough for transducer and audio front-end designs. The TLV376 uses a CMOS input stage with e-trim digital offset correction performed at wafer probe, plus a bipolar-style class-AB output stage capable of driving 1 kΩ loads to within 50 mV of either rail. The combined architecture yields a low-power precision op amp suitable for battery-powered instrumentation. Typical applications include battery-powered instrumentation, sensor signal conditioning (thermocouple, RTD, bridge amplifiers), handheld test equipment, audio front-ends, and active filters. Its low quiescent current makes it attractive for always-on IoT sensor nodes. When designing with the TLV376, observe the input common-mode range: although specified rail-to-rail, linearity degrades within 1 V of either rail - keep inputs in the linear region (0 to V+ minus 1 V) for best THD. Decouple V+ with a 0.1-µF ceramic bypass capacitor placed within 5 mm of the supply pin. This page synthesizes distributor pricing, drop-in alternative listings, and practical design notes not found in the standalone datasheet, helping engineers evaluate the TLV376IDBVR against competing precision op amps.

Запрос цены Контакты

TLV3801

TLV3801 - 225ps LVDS High-Speed Comparator | Texas Instruments

The Texas Instruments TLV3801 is a 225-ps high-speed comparator with complementary LVDS outputs, operating from a single 2.7 V to 5.25 V supply or a split supply of ±1.35 V to ±2.625 V, with a toggle frequency up to 3 GHz. It is packaged in an 8-pin WSON (DSG) 2x2 mm package for space-constrained designs. A comparator is an electronic circuit that compares two input voltages and outputs a digital signal indicating which is larger. The TLV3801 belongs to the high-speed comparator subclass, optimized for minimal propagation delay and high toggle rates. It sits within the analog-to-digital interface hierarchy, bridging analog signals to LVDS digital logic levels for downstream FPGAs and CPUs. Key features include a 225-ps propagation delay, complementary LVDS outputs that reduce EMI and suppress common-mode noise, and low power consumption of about 6.5 mW at 3.3 V. An enable pin supports power management and rail sequencing. The LVDS output stages drive standard LVDS inputs directly at up to 3 GHz toggle frequency. The device is built on a bipolar process with a differential input stage and LVDS output drivers, delivering deterministic, low-jitter switching. It is specified over the industrial temperature range of -40C to +125C, and an automotive-grade TLV3801-Q1 variant is available for AEC-Q100 applications. Typical applications include LIDAR pulse detection, where every nanosecond of propagation delay affects range resolution, high-speed differential line receivers for data transmission, and optical sensor modules. Clock recovery and fast data acquisition systems also benefit from the high toggle rate. Design tip: terminate the LVDS outputs with 100 ohm differential impedance and decouple each supply pin with 0.1 uF capacitors placed as close to the device as possible to preserve signal integrity.

Запрос цены Контакты

TLV4112ID

TLV4112ID - 2.7MHz High-Output-Drive Rail-to-Rail Op Amp | TI

The Texas Instruments TLV4112ID is a dual, high-output-drive operational amplifier with rail-to-rail output capability, a 2.7 MHz unity-gain bandwidth, and a 1.5 V/us slew rate. It is supplied in an 8-pin SOIC (D) package and is specified for a 6 V maximum supply voltage. The verified product data identifies the TLV4112 family as a family of high-output-drive operational amplifiers, with output currents exceeding 300 mA at 5 V. This output capability allows standard-pinout amplifiers to be used as high-current buffers or in coil-driver applications. The TLV4112ID is a dual general-purpose amplifier version, while TLV4110 and TLV4113 family members include shutdown functionality. Its 8-SOIC configuration makes it suitable for conventional analog signal-conditioning boards where a dual amplifier is required and a high-current output stage is useful. The rail-to-rail output helps preserve signal swing when operating near the supply rails, while the wide bandwidth supports applications requiring moderate-speed closed-loop performance. Engineers should still verify the exact input common-mode range, output swing, noise, offset, and stability requirements against the manufacturer datasheet before finalizing a design. TLV4112ID is relevant to low-voltage analog systems, sensor interfaces, buffer stages, current or voltage buffering, and coil-driver circuits. The device is not an SOA-rated power semiconductor, so SOA data is not applicable.

Запрос цены Контакты

Подкатегории

Товары (35.000+)

TLV271CD - 3 MHz, 16 V Low-Power RRO Op Amp | Texas Instruments

TLV271ID - 3MHz Low-Power RRO Op Amp | Texas Instruments

TLV271IP - 16V, 3MHz Rail-to-Rail Op Amp | Texas Instruments

TLV272CD - Dual 3MHz 16V Rail-to-Rail Op Amp | Texas Instruments

TLV272ID - Dual 16V 3MHz R-R Op Amp | Texas Instruments

TLV272IP - Dual 16V 3MHz R-R Op Amp | Texas Instruments

TLV274CD - 3 MHz Quad 16 V Operational Amplifier | TI

TLV274ID - Quad 16V 3MHz RRO Op Amp | Texas Instruments

TLV274IN - 3MHz Quad Rail-to-Rail Op Amp | Texas Instruments

TLV2888IDGKR - 36V 14MHz Zero-Drift Dual Op Amp | TI

TLV2888IDGKR-Q1 - Dual 36V 14MHz Zero-Drift Op Amp | TI

TLV3011AIDCKR - 5µA Open-Drain Comparator w/ 1.24V Ref | SC70-6 | TI

TLV316QDBVRQ1 - 10MHz RRIO Op Amp, AEC-Q100, SOT-23-5 | TI

TLV3201AIDCKR - 40ns microPOWER Comparator, SC-70-5 | Texas Instruments

TLV3202AQDGKRQ1 - 40ns Dual Automotive Comparator | TI

TLV320AC37CN - 3V Voice-Band Audio Processor | Texas Instruments

TLV320AIC3105IRHBR - Low-Power Stereo Audio CODEC | Texas Instruments

TLV320AIC3106IRGZT - Low-Power Stereo Audio CODEC | TI

TLV320AIC3110IRHBT - Low-Power Audio Codec with Class-D Amp | TI

TLV342ID - Dual 5.5V 2.2MHz RRO Op Amp | Texas Instruments

TLV3701IDBVR - Nanopower Push-Pull Comparator | Texas Instruments

TLV376IDBVR - 5.5MHz RRIO Op Amp | Texas Instruments | Precision

TLV3801 - 225ps LVDS High-Speed Comparator | Texas Instruments

TLV4112ID - 2.7MHz High-Output-Drive Rail-to-Rail Op Amp | TI