Интегральные схемы

5CEBA2F17C8N

5CEBA2F17C8N - Cyclone V E FPGA, 25K LE, 256-BGA | Altera

The Altera (Intel) 5CEBA2F17C8N is a Cyclone® V E family field-programmable gate array (FPGA) featuring 25,000 logic elements, 128 user I/O pins, and 2,002,944 bits of embedded memory in a 256-ball FineLine BGA (FBGA-256) package. Operating from a 1.1 V core supply, the device targets low-power, cost-sensitive applications across industrial, automotive, video processing, and communications segments. The Cyclone V E family is built on TSMC's 28 nm low-power process, delivering an optimal balance of logic density, DSP capability, and transceivers for mid-range programmable logic designs. A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnects, and dedicated hard IP such as block RAM, DSP slices, and PLLs. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) and digital ICs, enabling hardware-level parallelism that microcontrollers and DSPs cannot match. Unlike fixed-function ASICs, FPGAs are reprogrammable in-system, which makes them ideal for prototyping, low-volume production, and designs requiring late-stage hardware changes. Cyclone V E devices specifically address the cost- and power-optimized tier of the Altera/Intel FPGA portfolio. Key features of the 5CEBA2F17C8N include approximately 66 embedded 18×18 multipliers for DSP workloads, dedicated on-chip memory blocks totaling ~270 Kbits of M10K plus 1,536 Kbits of MLAB RAM, four general-purpose PLLs, and hard memory controller blocks for DDR2/DDR3/LPDDR2 interfaces. The device supports up to 128 general-purpose I/O pins arranged in banks that support multiple single-ended and differential I/O standards including LVDS, LVTTL, LVCMOS, SSTL, and HSTL, with hot-socketing capability. The FBGA-256 package provides a compact footprint suitable for space-constrained designs while maintaining signal integrity for high-speed interfaces. Architecturally, the Cyclone V E integrates hardened PCIe Gen2 controllers (in some package variants), embedded transceivers in selected speed grades, and an efficient routing fabric that connects logic, memory, and I/O elements. The 28 nm LP process enables static power consumption below typical 40-45 nm Cyclone IV designs, while the 1.1 V core voltage (VCCINT) keeps dynamic power in check. Configuration is supported via JTAG, serial (AS) flash, or parallel (PS) interfaces, with built-in decompression and encryption options. Typical applications for the 5CEBA2F17C8N include industrial motor control, factory automation I/O expansion, video surveillance image processing, LED video wall driving, software-defined radio baseband, and automotive driver-assistance subsystems. The combination of logic density, memory bandwidth, and DSP blocks makes it well-suited for parallel sensor fusion, image pipeline stages, and protocol bridging. The device is also widely used as a cost-optimized ASIC/ASSP replacement in low-volume production runs where NRE costs are prohibitive. When designing with this Cyclone V E variant, designers must respect the bank-based I/O supply grouping (VCCIO), provide proper decoupling across VCCINT/VCCA/VCCPD rails, and validate timing closure in Quartus Prime at the target speed grade. The -8 speed grade suffix (C8) indicates the slowest commercial speed bin, which simplifies timing closure at the cost of Fmax — pick a -6 or -7 variant if higher performance is required. Configuration scheme selection (EPCS or EPCQ flash) must also be decided early, since the chosen scheme affects board-level pin usage and BOM. This page synthesizes distributor pricing across DigiKey, Mouser, Arrow, LCSC, and Octopart, plus drop-in same-package and family alternatives, comparison parameters, and practical design notes not found in the standalone manufacturer datasheet.

USD $24,30 В наличии

5CEBA2F17I7N

5CEBA2F17I7N - Cyclone V E FPGA, 25K LE, 256-FBGA | Intel

The Intel (formerly Altera) 5CEBA2F17I7N is a low-power, low-cost Cyclone V E Field-Programmable Gate Array (FPGA) housed in a 256-ball FineLine Ball-Grid Array (FBGA) package. Built on TSMC's 28 nm low-power process, the device integrates 25,000 logic elements, 2,002,944 bits of embedded memory, and 156 (18x18) hardware multipliers, delivering an optimal balance of logic capacity, DSP throughput, and power efficiency for cost-sensitive applications. An FPGA (Field-Programmable Gate Array) is a class of programmable logic device that allows designers to configure digital logic blocks, interconnect, and I/O behavior after manufacture using an HDL-defined bitstream. Within the broader semiconductor taxonomy, FPGAs sit alongside ASICs, microcontrollers, and DSPs in the digital IC hierarchy, but uniquely offer hardware-level parallelism with re-programmability, making them ideal for interface bridging, custom acceleration, and rapid prototyping before ASIC tape-out. The 5CEBA2F17I7N delivers key features including up to 364 user I/O pins, 66 (18x18) multipliers per device variant (2 per logic array block column), a memory controller with DDR3/LPDDR2 support, and integrated transceiver-free I/O with LVDS, LVCMOS, and SSTL support. The 256-FBGA package offers 1.0 mm ball pitch, making it suitable for space-constrained industrial designs. Architecturally, the Cyclone V E family uses an Adaptive Logic Module (ALM) of 8-input fracturable look-up tables, providing better logic packing than 4-input LUT predecessors. The fabric includes variable-precision DSP blocks, embedded M10K memory blocks, and a hard PCIe Gen2 IP core option. Typical applications include industrial motor control, video processing and image sensor bridging, low-cost software-defined radio front-ends, factory automation I/O expansion, and portable test equipment. The wide temperature range and small package make it well-suited to embedded vision and human-machine interface (HMI) designs. When designing with the 5CEBA2F17I7N, ensure the 256-FBGA PCB land pattern uses 1.0 mm pitch BGA escape routing with microvia stacks. Power sequencing for the core, I/O, and auxiliary rails must follow the Cyclone V PowerPlay guidelines, and decoupling must include 100 nF and 10 uF ceramic capacitors adjacent to every supply pin. This page synthesizes distributor pricing, drop-in Cyclone V E family alternatives, and practical design notes not aggregated in a single manufacturer document.

USD $32,84 В наличии

5CEBA2U15I7

5CEBA2U15I7 - Cyclone V E FPGA, 25K LE, 324-BGA | Intel

The Intel (formerly Altera) 5CEBA2U15I7 is a Cyclone V E family Field-Programmable Gate Array (FPGA) built on TSMC's 28 nm low-power process, integrating 25,000 logic elements, 2002 Kbits of embedded memory, and 176 user I/O pins in a 324-ball UFBGA (also documented as 324-LFBGA) package. The device operates from a 1.1 V core supply with dedicated phase-locked loops for clock management, embedded multipliers, and a hard memory controller block for DDR2/DDR3/LPDDR2 external memory interfaces. An FPGA (Field-Programmable Gate Array) is a class of programmable logic device that combines configurable logic blocks (LCLBs), programmable interconnect, and dedicated hard IP such as transceivers, PLLs, and memory controllers. FPGAs sit at the top of the digital logic hierarchy: ASIC -> CPLD -> FPGA -> programmable SoC, and are widely used for parallel processing, hardware acceleration, and glue logic in applications where time-to-market, reprogrammability, and high I/O density outweigh the per-unit cost of an ASIC. The Cyclone V E family targets cost- and power-sensitive applications such as industrial control, video bridging, and motor control. Key features of the 5CEBA2U15I7 include 25,000 logic elements, 156 embedded 18x18 multipliers for DSP-style operations, up to 2002 Kbits of embedded SRAM, four general-purpose PLLs, and hard memory controllers supporting DDR2/DDR3/LPDDR2 with ECC. The device supports LVDS, LVCMOS, SSTL, and HSTL I/O standards on the 176 user I/O pins, and integrates a Configuration via JTAG or Active Serial (AS) flash. Compared with the Cyclone IV E family, the Cyclone V E delivers roughly 2x higher logic performance and significantly lower static power from the 28 nm process. Typical use cases include industrial motor drives, video surveillance pipelines, machine vision pre-processing, factory automation controllers, and PCIe-over-GPIO bridging where designers need a balance of DSP throughput, logic capacity, and low power. Designers also leverage this device for custom peripheral expansion on SoC-based systems and as a flexible I/O front-end for ASIC prototyping. When designing with the 5CEBA2U15I7, follow Intel's PCB layout guidelines for the UFBGA-324 (1.0 mm pitch) land pattern and use a 6- or 8-layer stack-up with dedicated power and ground planes. The device requires 0.9 V, 1.1 V, 2.5 V, and 3.3 V supplies; use the Altera/Intel PowerPlay Early Power Estimator (EPE) spreadsheet to size decoupling and predict junction temperature before committing to layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes drawn from Cyclone V datasheets and Altera/Intel application notes, providing information not found in the manufacturer datasheet alone.

USD $98,40 В наличии

5CEBA4F17I7

5CEBA4F17I7 - Cyclone V E FPGA, 49K LE, 256-LBGA | Intel / Altera

The Intel (Altera) 5CEBA4F17I7 is a Cyclone® V E field-programmable gate array (FPGA) integrating 49,000 logic elements, 3,464,192 bits of embedded memory, and 128 embedded 18x18 multipliers in a 256-ball FineLine BGA (F17, 17x17 mm) package. Built on TSMC's 28 nm low-power process, it operates from a 1.1 V core supply and supports commercial temperature-grade operation per the 'I' speed-grade ordering code. A field-programmable gate array (FPGA) is a semiconductor integrated circuit whose logic functionality is defined after manufacturing through programmable interconnect and configurable logic blocks. FPGAs belong to the broader hierarchy of programmable logic devices (PLDs), which also includes CPLDs, and they sit within the integrated circuits (ICs) family, specifically the programmable logic sub-category. Cyclone V E is the logic-optimized family in Intel's Cyclone V generation, optimized for low static and dynamic power while providing DSP blocks, embedded M10K RAM, and high-speed transceivers in higher-tier variants. Key features of the 5CEBA4F17I7 include 49,000 logic elements (LEs), 3,464,192 embedded memory bits (approximately 424 Kbits of M10K block RAM plus 128 Kbits MLAB), 56 embedded 18x18 multipliers, 4 PLLs, and 2 user I/O banks supporting a wide range of single-ended and differential I/O standards. The device supports configuration via Active Serial (AS), Passive Serial (PS), Fast Passive Parallel (FPP), and JTAG modes, enabling flexible boot from EPCS or EPCQ flash devices. The 256-pin LBGA package exposes approximately 164 user I/O pins depending on the I/O assignment, making it suitable for mid-density logic designs. The Cyclone V E architecture separates a power-optimized logic fabric from dedicated memory, DSP, and I/O subsystems. Hardened IP blocks (PCIe Gen2, memory controllers, and transceivers on other Cyclone V variants) reduce soft-logic overhead. The 28 nm process enables lower core power (typically 200-400 mW static plus dynamic depending on utilization and clock rate) versus previous-generation 40 nm Cyclone IV devices, making 5CEBA4F17I7 attractive for power-sensitive industrial designs. Typical applications include industrial motor control and machine vision, video processing and display controllers, automotive infotainment pre-development, low-cost software-defined radio front-ends, and embedded vision pipelines. The combination of mid-density logic, embedded RAM, and DSP blocks suits designs where a microcontroller plus CPLD would be insufficient but a high-end FPGA is overkill. When designing with this part, plan power sequencing for the 1.1 V core and 2.5 V/3.3 V I/O rails. Use the Altera/Intel Quartus II or Quartus Prime design suite for synthesis, place-and-route, and timing closure. The 17x17 mm LBGA package requires PCB design with 1.0 mm ball pitch and matched-impedance routing for high-speed DDR or LVDS signals. This page synthesizes distributor pricing, drop-in Cyclone V E alternatives, and practical design considerations not consolidated on any single distributor or manufacturer page.

USD $140,00 В наличии

5CEBA4F23C8N

5CEBA4F23C8N - Cyclone V E FPGA, 49K LE, 484-BGA | Intel

The Intel 5CEBA4F23C8N is a Cyclone® V E family Field Programmable Gate Array (FPGA) built on TSMC's low-power 28 nm process, offering 49,000 logic elements, 3,464,192 bits of embedded memory, and 224 general-purpose I/O pins in a 484-ball FineLine BGA (FBGA) package. It is supplied in the commercial temperature grade (0 °C to +85 °C junction) with the speed grade 8 silicon revision and ships in tray packaging. The device targets cost- and power-sensitive applications that still need substantial DSP and memory resources. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit consisting of an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hardened IP such as block RAM, DSP blocks, and high-speed transceivers. FPGAs occupy a tier in the programmable logic hierarchy alongside CPLDs and sit below ASICs in NRE cost but above microcontrollers in raw parallel processing capability. Cyclone V E is Intel's logic-optimized sub-family within Cyclone V, intentionally trading transceiver count for the lowest static and dynamic power per logic element of any 28 nm FPGA family. Key features of the 5CEBA4F23C8N include 49,000 logic elements, 224 GPIO organized across eight I/O banks supporting multiple single-ended and differential I/O standards (LVDS, LVTTL, LVCMOS, SSTL, HSTL), dedicated hardware multipliers and variable-precision DSP blocks, embedded M10K block RAM totaling 3,464,192 bits, and a phase-locked loop (PLL) clock management network. The F23 package variant (23 mm × 23 mm body) provides high I/O density for memory-rich and parallel-interface designs. Architecturally the device combines logic fabric with hard IP for PCIe Gen2, hard memory controllers for DDR3, and up to 3.125 Gbps transceivers in mixed variants, enabling single-chip implementation of industrial imaging, motor control, and video bridging pipelines. The Altera/Intel Quartus Prime design toolchain provides synthesis, place-and-route, and timing closure support; the device is supported by both Quartus Prime Standard and the freely downloadable Quartus Prime Lite edition for entry-level development. Typical applications include industrial motor control, factory automation, video surveillance, machine vision, and low-cost ASIC prototyping. The combination of large logic capacity and rich memory also suits software-defined radio pre-processing and broadcast video routing. When designing with this device, allocate at least 4-layer PCB routing with continuous GND plane beneath the FBGA, follow Intel's IBIS-AMI models for signal integrity simulation, and validate DDR3 interface timing with Quartus Prime's TimeQuest timing analyzer before sign-off. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical board-level design notes not aggregated in the manufacturer datasheet or on distributor catalog pages.

USD $62,41 В наличии

5CEFA2F23C8N

5CEFA2F23C8N - 25K-Cell Cyclone V E FPGA | Altera

The Altera 5CEFA2F23C8N is a Cyclone V E field-programmable gate array containing 25,000 logic cells, configured for a 1.1 V supply and offered in a 484-pin FBGA package. The device provides 224 I/O and combines programmable logic, embedded memory, and fixed logic in a single low-power FPGA package. Its ordering code identifies the 5CEA2 device family, F23 speed grade, C8 package designation, and industrial temperature grade. A field-programmable gate array is a reconfigurable digital semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA can be programmed after manufacture to implement control, datapath, interface, signal-processing, and protocol functions. Within the broader semiconductor hierarchy, it belongs to programmable logic devices and sits between fixed logic and software processors. Cyclone V E devices address designs that need substantial parallel processing without the power and cost of a larger FPGA family. The verified product information identifies 25,000 programmable logic cells, a 1.1 V supply, 224 I/O, and a 484-pin FBGA package. Its BGA format exposes many signal connections but requires a carefully controlled PCB footprint, power-delivery network, and assembly process. Because the supplied data does not state memory capacity, multiplier count, speed grade, operating-temperature limits, package dimensions, or pin assignments, those values must be confirmed in the official device documentation before design release. Typical uses include industrial automation, communications infrastructure, embedded control, video or image processing, networking, and test equipment. Parallel tasks such as data collection, packet handling, filtering, and fixed-function control can be implemented concurrently. The exact suitability depends on logic utilization, memory requirements, I/O standards, timing closure, and the Cyclone V E compilation tools selected for the design. A sound design begins with Quartus Prime compilation for the exact 5CEFA2F23C8N device and matching pin constraints. Validate power sequencing, bank voltages, decoupling, signal integrity, thermal performance, and BGA assembly requirements early. Do not infer a pin function solely from its position; use the manufacturer pinout and package documentation for every board-level connection. This page consolidates the verified distributor identity, package and logic-cell information, sourcing links, and design cautions into one engineering reference. It does not invent unverified electrical limits, timing figures, or package dimensions; missing values are explicitly marked for follow-up before schematic or PCB release.

USD $45,86 В наличии

5CEFA2F23I7

5CEFA2F23I7 - 25K LE Cyclone V E FPGA, 224 I/O, 484-FBGA | Intel

The Intel 5CEFA2F23I7 is a Cyclone V E family Field-Programmable Gate Array (FPGA) built on a 28 nm low-power process, providing 25,000 logic elements and 224 user I/O in a 484-ball FineLine BGA (FBGA) package measuring 23 x 23 mm. The device integrates 2,002,944 bits of embedded memory, supports up to 25,000 logic elements, and operates from a 1.07 V to 1.13 V core supply while tolerating an industrial temperature range of -40 °C to 100 °C, making it suitable for cost- and power-sensitive embedded designs. A Field-Programmable Gate Array (FPGA) is a semiconductor device containing configurable logic blocks (CLBs), programmable interconnects, and dedicated hard IP such as memory controllers, transceivers, and DSP blocks. FPGAs sit hierarchically between general-purpose microcontrollers (which execute software) and application-specific integrated circuits (ASICs) which are fixed at fabrication. FPGAs offer hardware-level parallelism and reconfigurability, allowing the same silicon to implement custom data paths, glue logic, video pipelines, motor drives, or communication protocol stacks without a custom mask set, which reduces NRE cost and time-to-market for low- to mid-volume production. Key features of the 5CEFA2F23I7 include 25K logic elements, 2,002,944 bits of embedded RAM, integrated 3.125 Gbps transceivers in select Cyclone V variants, hard memory controllers supporting DDR2/DDR3, and an 8-channel DMA controller. The 484-FBGA package exposes 224 user I/O with high-speed LVDS support and offers a thermal envelope appropriate for fanless industrial enclosures. The 'I7' suffix denotes the industrial temperature grade, while 'N' denotes lead-free compliance. The Cyclone V E family uses a 28 nm TSMC low-power process and a hard ARM Cortex-A9 MPCore subsystem in the 'SoC' variants (5CSE/5CST), while the 'E' variants are pure FPGA fabric optimized for logic density per dollar. Hard IP blocks reduce soft logic consumption for memory interfaces, PLLs, and PCIe GenX root ports, leaving more programmable fabric for application differentiation. Typical applications include industrial motor control, machine vision front-ends, video surveillance processing, factory automation controllers, and telecommunications line-card glue logic. The combination of high I/O count, low static power, and industrial temperature grade makes 5CEFA2F23I7 a strong fit for outdoor and factory-floor designs where fanless operation is required. When designing with this FPGA, carefully plan I/O bank assignments because the 1.07 V to 1.13 V core supply must be generated from a low-noise regulator such as a TI TPS7A4701 LDO, and decoupling must include at least 100 nF and 10 µF capacitors near each supply pin. Ensure JTAG, MSEL, and configuration mode pins are pulled correctly to support passive or active configuration schemes. This page consolidates distributor pricing from DigiKey and Mouser, three drop-in same-brand alternatives from the Cyclone V E family, and four practical design notes not collated in the manufacturer datasheet.

USD $72,00 В наличии

5CEFA2F23I7N

5CEFA2F23I7N - Cyclone V E FPGA 25K LE, 484-FBGA | Intel

The Intel 5CEFA2F23I7N is a Cyclone V E family Field-Programmable Gate Array (FPGA) with 25,000 logic elements, 2,002,944 bits of embedded memory, and 224 general-purpose I/O pins, housed in a 484-ball FineLine BGA package. It is built on TSMC's low-power 28 nm process and targets cost-sensitive, high-volume applications that demand low static and dynamic power. The device integrates hard memory controllers, PLLs, and DSP blocks to reduce system BOM cost while preserving the flexibility of programmable logic. An FPGA (Field-Programmable Gate Array) is a semiconductor device whose logic function is defined by the customer after manufacturing, using a hardware description language such as Verilog or VHDL. Within the broader taxonomy, FPGAs belong to the programmable logic device (PLD) family, which sits between fixed-function ASICs and software-driven microcontrollers. The Cyclone V E series specifically targets applications where low total power, moderate logic density, and integrated transceiver-free I/O are the primary design drivers, rather than maximum throughput. Key features of the 5CEFA2F23I7N include 25,000 logic elements, 156 embedded 18x18 multipliers for DSP workloads, 224 user I/O supporting LVDS, LVCMOS, SSTL, and HSTL I/O standards, and 4 PLLs for clock management. The industrial temperature grade (-40C to +100C ambient) makes it suitable for factory-floor and outdoor equipment. The 484-FBGA package offers a compact 19 mm x 19 mm footprint with 1.0 mm ball pitch, balancing board-routing density against assembly yield. Architecturally, Cyclone V E FPGAs use a Logic Array Block (LAB) structure of 16 Logic Elements per LAB, with adaptive logic modules supporting 6-input LUTs. Distributed and block RAM totals 2,002,944 bits, configurable as RAM, ROM, or FIFO. Configuration is stored in SRAM cells, requiring an external configuration flash such as an EPCQ or EPCS device at power-up; the FPGA also supports JTAG-based in-system programming via the Intel Quartus Prime toolchain. Typical applications include industrial machine vision, motor control, factory automation controllers, video processing bridges, low-cost software-defined radio front-ends, and portable medical instrumentation. The combination of low cost per logic element and integrated memory controllers is particularly attractive for replacing multiple discrete MCUs or DSPs in cost-sensitive designs. When designing with the 5CEFA2F23I7N, plan power sequencing to ramp core VCC before I/O VCC, and provide at least four PCB decoupling capacitor values (0.1 uF, 1 uF, 10 uF, and bulk) around the BGA. Signal-integrity simulations are recommended for DDR3 interfaces, since the 484-FBGA package introduces significant lead inductance at frequencies above 200 MHz. This page synthesizes distributor pricing, same-family drop-in variants, and practical design guidance not found in the standalone manufacturer datasheet.

USD $42,85 В наличии

5CEFA4F23C7N

5CEFA4F23C7N - Cyclone V E FPGA, 49K LE, 484-BGA | Intel

The Intel 5CEFA4F23C7N is a Cyclone V E family Field-Programmable Gate Array (FPGA) integrating 49,000 logic elements, 3,464,192 bits of embedded memory, and 224 (18x18) multipliers in a 484-ball FineLine BGA (FBGA-484) package. Built on a low-power 28 nm TSMC process, the device targets high-volume, cost-sensitive applications that simultaneously require shrinking power consumption, low total BOM cost, and rapid time-to-market. The core voltage is 1.1 V with multiple I/O banks supporting LVDS, LVTTL, LVCMOS, SSTL, and HSTL standards. A Field-Programmable Gate Array (FPGA) is a type of programmable logic device containing an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hardware blocks such as block RAM (BRAM), DSP blocks, PLLs, and transceivers. Within the broader semiconductor taxonomy, an FPGA sits between an application-specific integrated circuit (ASIC) and a general-purpose microcontroller: it offers ASIC-class performance and parallelism while remaining software-configurable like a CPU. Cyclone V E is Intel's (formerly Altera's) lowest-power family, optimized for industrial, motor control, video processing, and embedded vision. Key features of the 5CEFA4F23C7N include 49K logic elements, 3.46 Mbit embedded memory (approximately 303 Kbytes of block RAM plus distributed RAM), 224 18x18 multipliers, four general-purpose PLLs, and up to 224 user I/O pins (package-dependent). The device integrates a hard PCIe Gen2 controller (x1/x2/x4) and supports external memory interfaces (EMIF) for DDR3, DDR2, LPDDR2, and QDRII/+. Compared with the previous-generation Cyclone IV, Cyclone V E reduces core power by up to 40% and offers double the logic and memory density at lower cost per logic element. Typical applications include industrial motor control and factory automation (driven by high DSP block count), video processing and surveillance infrastructure, automotive driver-assistance subsystems, low-cost ASIC prototyping, and PCI Express endpoint cards. The wide I/O support and integrated transceivers make the part well suited to camera-link and LVDS-based image sensor aggregation. Designers typically pair the FPGA with a TI MSP430 host MCU for housekeeping or a Lattice MachXO2 for I/O expansion. When designing with the 5CEFA4F23C7N, ensure the PCB provides a minimum 8-layer stack-up with continuous GND planes beneath the BGA to maintain signal-integrity on LVDS pairs and DDR3 signals. The JTAG chain must include the proper TCK pull-down and TMS pull-up resistors per the BSDL file. Thermal management: at 1.1 V core and 49K LE utilization, a typical design draws 1.5-3 W; provide adequate top-side copper or a heat-spreader footprint for hot-spot mitigation. This page synthesizes distributor pricing, drop-in Cyclone V family alternatives, and practical PCB/layout design notes not found in the manufacturer datasheet, giving engineers an actionable comparison resource.

USD $24,10 В наличии

5CEFA4U19I7

5CEFA4U19I7 - Cyclone V E FPGA 49K LE UFBGA-484 | Intel/Altera

The Intel (formerly Altera) 5CEFA4U19I7 is a Cyclone® V E Field-Programmable Gate Array built on TSMC's 28nm low-power process, delivering 49,000 logic elements, 3,464,192 bits of embedded memory, and 224 18x18 multipliers in a 484-ball Ultra-FineLine BGA (UFBGA) package. The "5CEFA4" prefix denotes the device family (Cyclone V E), logic density (A4 = 49K LE), and the "U19" suffix identifies the UFBGA-484 package option. The "I7" speed/temperature grade indicates industrial temperature range (-40C to +100C) with a -7 speed bin optimized for timing closure on high-performance DSP and video pipelines. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks, interconnect, and I/O that engineers can configure after manufacturing to implement arbitrary digital functions. Cyclone V E belongs to Intel's low-cost, low-power FPGA family positioned between Cyclone IV and Cyclone 10 LP. Within the broader taxonomy: FPGA -> programmable logic -> programmable logic device (PLD) -> digital IC -> semiconductor. Compared with ASICs, FPGAs offer lower NRE cost and faster time-to-market at the expense of higher unit cost, lower density, and higher dynamic power. Key features include 224 18x18 hardware multipliers for DSP workloads, dedicated memory blocks totaling approximately 3.46 Mbits, integrated transceivers absent on this E variant (the GX/GT suffixes add transceiver capability), and on-die PLL clock management. The 28nm process enables static power below 0.25W typical and supports 1.1V core operation with multi-rail I/O banks supporting LVDS, LVCMOS, SSTL, and HSTL standards up to 3.0V. The 484-ball UFBGA package provides high I/O density for memory-rich designs and supports DDR3 external memory interfaces through dedicated PHY. Typical applications include industrial motor control, video surveillance and machine vision, automotive driver assistance systems (non-safety-critical paths), wireless baseband, software-defined radio (SDR), and embedded vision processing. The combination of mid-range logic density, hardware multipliers, and industrial temperature grade makes it especially attractive for cost-sensitive edge processing and factory automation where Cyclone 10 LP is not yet adopted. When designing with this device, ensure proper power rail sequencing (1.1V core, separate VCCAUX/VCCPD) and adequate decoupling. Quartus Prime design software supports the device family. The 484-UFBGA footprint is shared with other Cyclone V E density options, easing migration between 5CEFA2/4/5/7/9 parts. This page synthesizes distributor pricing, package-compatible same-family drop-in alternatives (5CEFA5U19I7N, 5CEFA9F27I7N), and practical design notes not found in the standalone Altera datasheet.

USD $19,75 В наличии

5CEFA5F23C7N

5CEFA5F23C7N - Cyclone V E FPGA, 77k LE, 484-FBGA | Intel

The Intel (formerly Altera) 5CEFA5F23C7N is a Cyclone V E family Field Programmable Gate Array (FPGA) housed in a 484-ball FineLine BGA (FBGA) package, offering 77,000 logic elements, 5,001,216 bits of embedded memory (≈446 kbit per embedded M9K block equivalent user RAM), and 240 user I/O pins with a 1.1 V core supply. The F23 device variant is positioned for cost- and power-sensitive high-volume applications, delivering hardened memory controllers, variable-precision DSP blocks, and an integrated PCIe Gen1/Gen2 hard IP block, while keeping fabric logic density high for custom datapaths. The 484-FBGA package supports high-speed transceiver-style I/O through LVDS and dedicated clock networks, suitable for industrial control, video bridging, motor control, and factory automation designs. What is an FPGA? A Field Programmable Gate Array (FPGA) is a programmable logic device whose interconnect, lookup tables, and embedded blocks (memory, DSP, transceivers, PLLs) are reconfigured by the user after manufacture, providing ASIC-like parallelism with the flexibility of software-defined hardware. Within the broader programmable-logic taxonomy, the Cyclone V E family sits below the high-performance Stratix family and above the low-cost Cyclone family, targeting mid-range applications that need a balance of logic density, transceivers or hard IP, and low static-power consumption. FPGAs are typically paired with external flash (for configuration), DDR2/DDR3 memory, and an Ethernet or USB bridge, often managed by an embedded Nios II soft processor. Key differentiating specifications for the 5CEFA5F23C7N include a 1.1 V core VCC, 240 user I/O with up to 840 Mbps LVDS support, dedicated 8-bit DDR3 hard memory controller, variable-precision DSP blocks (18x19 multiplier), and up to 12 general-purpose PLLs. The Cyclone V E family uses TSMC's 28 nm low-power process, which contributes to its low static power (typical 0.6 W at 85 °C) and its suitability for thermally constrained embedded systems without active cooling. Typical applications include industrial motor control drives, machine-vision frame grabbers, broadcast video processing (SD/HD-SDI), PCIe-based protocol bridges, software-defined radio front-ends, and low-cost ASIC prototyping. The combination of DSP blocks and high LVDS pin count makes the part particularly well-suited to multi-channel ADC/DAC interfacing. When designing with this device, ensure that the Quartus Prime toolchain (subscription or free web edition) is selected early because the Cyclone V E family is not supported by legacy Quartus II versions. A 0.1 µF decoupling capacitor network must be placed adjacent to every VCC pin pair, and the JTAG chain must include a 10 kΩ pull-up on TCK, TMS, and TDI to guarantee clean boundary-scan operation during factory test. This page synthesizes distributor pricing for 5CEFA5F23C7N, drop-in same-family alternatives, and practical design notes not present in the Intel Cyclone V handbook.

USD $108,75 В наличии

5CEFA5F23I7N

5CEFA5F23I7N - Cyclone V E FPGA 77K LE 484-FBGA | Intel / Altera

The Intel / Altera 5CEFA5F23I7N is a Cyclone® V E family Field-Programmable Gate Array (FPGA) housed in a 484-ball FineLine BGA package (F23) with 240 user I/O pins, 77,000 logic elements, and 5,001,216 bits of embedded memory. Built on TSMC's 28 nm low-power process, this device balances low static and dynamic power consumption with the bandwidth requirements of high-volume, cost-sensitive applications. The part operates across an industrial temperature range of -40 °C to +100 °C (I7N speed/temperature grade). A Field-Programmable Gate Array is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that the designer can reconfigure after manufacture. FPGAs sit within the broader taxonomy of programmable logic devices (PLDs), which themselves are a sub-class of digital logic ICs. Cyclone V E is the logic-only variant of the Cyclone V family, positioning itself below Cyclone V GT (with transceivers) and Cyclone V SE/SX/ST (with hard processor system) for applications needing DSP, memory, and I/O bandwidth without high-speed serial links. Key features include support for up to 240 general-purpose I/O with 1.4 Gbps LVDS capability on selected pins, dedicated 18×18 multipliers (up to 300 in this density), variable-precision DSP blocks, and a configurable Memory Controller (Hard Memory Controller) for DDR3, DDR2, and LPDDR2 external memories. The device also integrates PCI Express Gen2 hard IP blocks (×1, ×2, or ×4) and a high-speed ADC block for system monitoring. Configuration is supported via fast passive parallel, active serial, or JTAG interfaces, and the part supports remote system upgrades through dedicated dual-configuration flash interfaces. Architecturally, the Cyclone V E fabric combines logic-array blocks (LABs) of 16 adaptive logic modules (ALMs), an interconnect hierarchy of row and column interconnects, and embedded memory blocks (M9K and M144K). The Hard Memory Controller with ECC, combined with variable-precision DSP, makes this density ideal for mid-range digital signal processing, video bridging, and industrial motor control where deterministic latency and power efficiency are required. Typical applications include industrial machine vision and factory automation, broadcast video processing and display controllers, automotive driver assistance (non-transceiver paths), medical imaging preprocessing, software-defined radio baseband processing, and PCI Express endpoint cards in test/measurement. Cyclone V E devices are also widely used in motor-control and servo drives, where the combination of DSP blocks, fast ADCs, and PCI Express endpoint capability fits compactly on a single FPGA. When designing with the 5CEFA5F23I7N, allocate sufficient PCB layer count to route 240 single-ended (or ~120 LVDS-pair) signals out of the 19×19 mm BGA. Use the Altera / Intel Quartus II or Quartus Prime design suite (14.0 and later for Cyclone V support) and validate pin assignments with the Pin Planner before tape-out. The 'I' in I7N denotes industrial temperature, so pay attention to thermal-rise derating in enclosed enclosures; the N denotes lead-free packaging. This page consolidates distributor pricing, pin-compatible same-family variants, and practical design considerations that complement, but do not replace, the official Intel Cyclone V device datasheet and handbook.

USD $138,40 В наличии

5CEFA7F27C6N

5CEFA7F27C6N - Cyclone V E FPGA 149.5K LE 672-FBGA | Altera

The Intel (formerly Altera) 5CEFA7F27C6N is a Cyclone® V E family Field-Programmable Gate Array (FPGA) delivering 149,500 logic elements, 7,880,704 bits of embedded memory, and 336 user I/O pins in a 672-ball FineLine BGA (FBGA) package. Built on TSMC's 28nm low-power process, it supports a core voltage of 1.1V and integrates up to 156 18x18 multipliers, making it suited for cost-sensitive high-volume designs. An FPGA is a programmable logic device containing an array of configurable logic blocks (CLBs) connected by programmable interconnect. FPGAs are positioned between fixed-function ASICs (highest performance, highest NRE cost) and microcontrollers (lower performance, software-defined flexibility), offering hardware-level parallelism with software-reprogrammable logic. The Cyclone V E family targets applications that demand DSP throughput, memory bandwidth, and transceivers without the cost of high-end FPGAs. Key features include 156 18x18 multipliers for DSP pipelines, 7.88 Mbits of embedded RAM (M10K blocks), dedicated DDR3 memory controllers with hard PHY, and 8 PLLs for clock management. The device supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards, and integrates PCIe hard IP for endpoint applications. Operating temperature range is 0°C to 85°C for the commercial 'C6' speed grade. Architecturally, Cyclone V E devices combine a logic fabric with column-based DSP blocks, M10K memory blocks arranged in columns, and a hardened periphery for transceivers and external memory interfaces. The 28nm process enables lower static power versus prior 40/60nm Cyclone generations, allowing fan-less operation in many industrial use cases. Typical applications include industrial motor control, video processing, LED display drivers, machine vision, software-defined radio, and PCIe-based acceleration cards. The combination of DSP blocks and DDR3 controllers makes it well-suited for real-time signal processing pipelines. When designing, ensure proper decoupling near every bank and follow the IBIS model for signal integrity. The 672-FBGA requires a controlled-impedance stack-up and vias-in-pad are recommended for high-speed signals. This page synthesizes distributor pricing, drop-in same-package alternatives, and engineering design notes drawn from real Cyclone V handbooks and reference designs — practical synthesis not found in any single distributor listing.

USD $218,00 В наличии

5CEFA9F23I7N

5CEFA9F23I7N - Cyclone V E FPGA 301K LE 484-BGA | Altera

The Altera 5CEFA9F23I7N is a Cyclone V E family Field-Programmable Gate Array (FPGA) delivering 301,000 logic elements in a 484-ball FineLine BGA package. The device integrates 14,251,008 bits of embedded memory, 224 (18x18) hardware multipliers, and a rich mix of high-speed transceivers and I/O for cost-sensitive high-volume designs. A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs) connected by a programmable interconnect. Modern FPGAs such as the Cyclone V E also integrate hard IP blocks including transceivers, DSP blocks, block RAM, and memory controllers, blending the flexibility of programmable logic with the deterministic performance of ASIC-class peripherals. Cyclone V E belongs to Altera's (now Intel FPGA) low-power, low-cost family positioned between ASICs and high-end FPGAs. Key features of the 5CEFA9F23I7N include 3.125 Gbps transceivers, a hard memory controller for DDR3, PCIe Gen2 x4 support, and fractional PLL synthesis. The part supports industrial temperature operation (-40C to +100C for the I7 speed grade) and is built on TSMC's 28 nm low-power process, giving a favorable performance-per-watt ratio for cost-sensitive applications. The Cyclone V E architecture pairs a fabric of adaptive logic modules (ALMs) with 8-input fracturable look-up tables, dedicated 18x18 multipliers for DSP, and M20K block RAM tiles of 20 Kb each. Configuration is via SRAM cells, requiring a boot flash such as EPCQ on the board; the device supports passive serial, fast passive parallel, and JTAG configuration chains. Typical applications include industrial machine vision, motor control, video processing and display pipelines, software-defined radio front ends, low-cost wireline aggregation, and PCIe endpoint cards in test instrumentation. The 484-FBGA package supports both consumer and industrial boards with abundant GPIO for parallel sensor or display interfaces. When designing with this FPGA, plan the power tree carefully: VCCINT, VCCA, VCCD_PLL, VCCIO per bank, and transceiver rails each require their own decoupling strategy. Provide a configuration flash and a robust JTAG header for boundary-scan debug and in-system programming.

USD $198,00 В наличии

5CEFA9F27C7N

5CEFA9F27C7N - Cyclone V E FPGA 301K LE | Intel | FBGA-672

The Intel (formerly Altera) 5CEFA9F27C7N is a high-density Cyclone V E Field-Programmable Gate Array (FPGA) housed in a 672-ball FineLine BGA package. According to the verified distributor listing, this Cyclone V E device integrates 301,000 logic elements and 14,251,008 bits of embedded memory, supported by 336 user I/O pins for high-bandwidth system interfaces. Cyclone V E FPGAs belong to the broader family of low-power, cost-optimized programmable logic devices. Positioned in the hierarchy as FPGA -> programmable logic -> logic IC -> integrated circuit, Cyclone V E devices target cost-sensitive, high-volume applications requiring substantial logic density without the power and cost burden of high-end FPGAs. The 'E' suffix indicates the logic-and-EML (Embedded Memory Blocks) optimized variant, distinguished from the 'GX' transceiver-equipped family and the 'GT' high-speed variant. Key features of the 5CEFA9F27C7N include 301,000 logic elements, 14.25 Mbits of embedded memory, 336 GPIOs supporting multiple I/O standards (LVDS, LVCMOS, SSTL), integrated PLLs, and hard memory controller blocks. The 'F27' package designation indicates a 672-ball FineLine BGA with 27 mm body size, while the 'C7' speed grade and 'N' lead-free suffix confirm commercial-grade operating conditions. Maximum operating frequency is specified at 800 MHz with a core supply of 1.13 V. Architecturally, the device leverages a 28 nm TSMC low-power process with Adaptive Logic Modules (ALMs) and variable-precision DSP blocks. This allows efficient implementation of parallel processing pipelines, motor control loops, video bridging, and protocol bridging. Embedded hard IP blocks reduce soft-logic area and improve deterministic latency for memory interfaces such as DDR3. Typical applications include industrial motor control and machine vision, broadcast video processing and format conversion, military and avionics subsystems, automotive driver assistance platforms, medical imaging pre-processing, and high-density ASIC prototyping. The combination of 301K LE logic capacity and 336 GPIOs makes the device particularly suited for system-on-module (SoM) designs and protocol-rich industrial gateways. When designing with this FPGA, engineers should pay close attention to BGA fanout constraints and PCB layer stack-up. The 672-ball FineLine BGA requires microvia or via-in-pad technology for reliable manufacturing. Use the Quartus Prime design software for synthesis, place-and-route, and timing closure; verify pin assignments against the device pin-out file before committing to layout. This page synthesizes distributor pricing, drop-in Cyclone V E family alternatives, and practical design notes not found in the manufacturer datasheet. All alternatives share the 672-ball FineLine BGA footprint for true PCB-level drop-in compatibility.

USD $295,00 В наличии

5CGTFD7D5F27I7N

5CGTFD7D5F27I7N - Cyclone V GT FPGA 150K LE, 6.6Mb, 672-BGA | Intel

The Intel (formerly Altera) 5CGTFD7D5F27I7N is a Cyclone V GT field-programmable gate array built on TSMC's 28 nm low-power process, integrating 149,500 logic elements, 7,880,704 bits of embedded memory, and 336 user I/Os in a 672-pin FineLine BGA (FBGA) package with industrial temperature grade (–40C to +100C). It belongs to the Cyclone V GT family which adds 6 integrated 3.125 Gbps transceivers and an industrial-grade feature set, targeting mid-range, transceiver-enabled designs. An FPGA (Field-Programmable Gate Array) is a reconfigurable integrated circuit that lets designers implement custom digital logic, memory blocks, arithmetic units, and high-speed serial interfaces after silicon fabrication. FPGAs sit at the top of the programmable logic hierarchy - above CPLDs and PALs - and below application-specific standard products (ASSPs). Within Intel's programmable solutions portfolio, Cyclone V GT bridges the gap between low-cost Cyclone V E/SE and the high-end Arria/Stratix families, offering transceivers at cost points accessible to mainstream designs. Key features of the 5CGTFD7D5F27I7N include 156 18x18 hardware multipliers, 1 PLL, 9.4 Mbits of M10K memory plus 846 Kbits of MLAB memory, 3.125 Gbps transceivers, and dedicated hard IP for DDR3, PCIe Gen2 x4, and 10 Gigabit Ethernet MAC. The 28 nm process delivers a favorable power-to-performance balance: typical core voltage is 1.1 V with sub-1.5 W static power consumption depending on configuration and utilization. The device also supports configuration via passive serial, fast passive parallel, JTAG, and Altera's encrypted configuration schemes. Architecturally, the Cyclone V GT fabric combines logic array blocks (LABs), embedded memory blocks, DSP blocks, and routing interconnect in a tile-based topology. The transceiver blocks (GX) are hardened for serial protocols, freeing fabric logic from clock-data recovery and equalization tasks. Configuration memory uses SRAM cells, requiring an external flash or EPCQ device for volatile configuration on every power-up. Typical applications include industrial video and image processing, motor control and factory automation, mid-range wireless baseband, portable test and measurement, automotive driver assistance, and PCI Express endpoint cards. The combination of transceivers, DSP density, and DDR3 controller hard IP makes it well suited to designs that previously required an ASSP plus an FPGA. When designing with this part, consider Quartus Prime for synthesis and place-and-route, and verify the -7 speed grade's timing margins against your target Fmax. Power planning is essential because transceiver-enabled Cyclone V devices can exceed 5 W under heavy I/O activity, and the FBGA package requires careful thermal management via PCB copper pours and via arrays. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the manufacturer datasheet to help engineers select, source, and integrate the 5CGTFD7D5F27I7N efficiently.

USD $218,40 В наличии

5CGTFD9A5U19A7N

5CGTFD9A5U19A7N - Cyclone V GT FPGA 301K LE UFBGA-484 | Intel

The Intel (formerly Altera) 5CGTFD9A5U19A7N is a Cyclone® V GT field-programmable gate array (FPGA) with 301,000 logic elements, 14,251,008 embedded memory bits, and 240 user I/Os, fabricated on a 28 nm TSMC low-power process and packaged in a 484-ball Ultra-FineLine BGA (UFBGA). The Cyclone V GT family integrates up to 3.125 Gbps transceivers and a hard PCIe Gen2/Gen3 IP core, targeting cost- and power-sensitive applications that still need multi-gigabit serial links. An FPGA (Field-Programmable Gate Array) is a semiconductor device built from a matrix of configurable logic blocks (CLBs), embedded memory blocks, DSP blocks, and programmable routing, all controlled by a customer-loaded bitstream. FPGAs occupy the hierarchy of programmable logic devices -> logic ICs -> integrated circuits, offering hardware-level parallelism and reprogrammability that microcontrollers and ASICs cannot. The 5CGTFD9A5U19A7N belongs to the Cyclone V GT sub-family, which adds high-speed transceivers on top of the Cyclone V E architecture. Key features include 156 18x18 multipliers, 4 PLLs, 2 hard memory controllers, and embedded PCIe Gen2 x1/x2/x4 controllers. The 484-pin UFBGA package supports high-density board designs with industrial-grade -40C to +125C junction operation, suitable for harsh-environment deployments. The 'A7N' suffix denotes the speed grade and lead-free RoHS-compliant shipping form. Cyclone V GT devices use a heterogeneous architecture that pairs general-purpose FPGA fabric with dedicated transceiver and PCIe hard IP, lowering power versus soft-IP implementations. The 1.1 V core voltage and 28 nm process enable sub-1 W typical power at moderate logic utilization, while integrated transceivers remove the need for external PHY chips. Typical applications include industrial machine vision, motor control and drives, software-defined radio, video bridging and capture, low-cost wireline backplanes, and PCIe endpoint cards. The transceiver-rich GT variant is particularly attractive when designers need 1 Gbps to 3.125 Gbps links without the cost of a Cyclone V GX/GTX or Stratix class device. Designers should consult the Cyclone V Device Handbook for transceiver channel placement rules (the GT family supports up to 9 transceiver channels per device, with specific bank restrictions), PCB microstrip/stripline design for 3.125 Gbps links, and Quartus Prime tool version compatibility (Quartus Prime Standard / Pro 18.1 or later is generally recommended for Cyclone V). This page synthesizes current distributor pricing, drop-in same-package alternatives, and practical design notes beyond the manufacturer datasheet. Pricing data references are stated as of 2026-09-05.

USD $241,50 В наличии

5CGXBC5C7F27C8N

5CGXBC5C7F27C8N - Cyclone V GX FPGA, 77K LE, 672-FBGA | Intel

The Intel (formerly Altera) 5CGXBC5C7F27C8N is a Cyclone® V GX field-programmable gate array (FPGA) integrating 77,000 logic elements, 4,884 Kbits of embedded memory (5,001,216 bits total), and 3.125 Gbps transceivers in a 672-pin FineLine BGA (FBGA) package. Built on TSMC's 28 nm low-power process, the device operates from a 1.1 V core supply with separate transceiver and auxiliary rails, and is rated for the commercial 0 °C to +85 °C temperature range. An FPGA is a semiconductor integrated circuit whose logic function is defined after manufacturing by the end user, as opposed to an ASIC whose function is fixed at tape-out. FPGAs occupy a tier of digital logic between microcontrollers (fixed-instruction processors) and ASICs (custom-silicon implementations), combining programmable logic fabric, configurable I/O, and dedicated hard IP such as transceivers, PLLs, and memory blocks. Within that hierarchy, the Cyclone V family sits in Intel's low-cost, low-power family tree: Cyclone V → low-cost FPGA family → programmable logic → semiconductor. The GX sub-family adds 3.125 Gbps multi-gigabit transceivers that the plain Cyclone V E does not. Key features of the 5CGXBC5C7F27C8N include six 3.125 Gbps transceiver channels, 364 18x18 multipliers suited for DSP pipelines, embedded PCIe hard IP, and configurable I/O supporting LVDS, LVTTL, LVCMOS, and DDR3 interfaces. The part is supplied in tray packaging and supports JTAG (IEEE 1149.1) and Active Serial configuration from external flash. Typical applications include industrial machine vision, motor control and servo drives, broadcast video processing, low-cost software-defined radio front-ends, and PCI Express endpoint cards. Compared with the larger Cyclone V GT family, the GX sacrifices the highest transceiver line rate in exchange for a substantially lower price point at similar logic densities. When designing with this device, observe the recommended decoupling scheme in the Cyclone V device family datasheet and pin-connection guidelines document; missing 0.1 µF/10 µF capacitor pairs near each transceiver supply pin is one of the most common causes of link-training failures. Quartus Prime (Standard or Lite, depending on tier) is the programming environment.

USD $54,18 В наличии

5CGXBC5C7U19C8N

5CGXBC5C7U19C8N - Cyclone V GX FPGA, 77K LE, 484-FBGA | Intel

The Intel 5CGXBC5C7U19C8N is a Cyclone V GX family Field-Programmable Gate Array (FPGA) fabricated on TSMC's 28 nm low-power process, integrating 77,000 logic elements (LEs), 4,460 Kbits of embedded memory, and 224 general-purpose I/Os in a 484-ball FineLine BGA (UBGA, 22x22 mm, 1.0 mm pitch) package. It is a commercial-temperature-grade device (0C to +85C junction) supplied in tray packaging, with on-chip transceivers hardened for gigabit serial protocols and dedicated Multipliers, Variable-Precision DSP blocks, and a PLL-based clock management network. An FPGA (Field-Programmable Gate Array) is a class of programmable logic device that sits in the broader hierarchy of digital semiconductors between ASICs and microcontrollers. The Cyclone V family is positioned as a low-power, mid-density FPGA for cost-sensitive applications, blending parallel hardware fabric, serial transceivers, and an ARM-hard core option (in the SoC variants) on a single die. Within that taxonomy, the GX sub-family specifically adds 3.125 Gbps transceivers, making it suitable for protocols like PCIe Gen2, Gigabit Ethernet, Serial RapidIO, and CPRI without external PHY chips. Key features include 77K LEs, approximately 4.46 Mbits of M10K block RAM, 224 maximum user I/Os, integrated 3.125 Gbps transceivers, variable-precision DSP blocks, and hard memory controllers for DDR3, DDR2, and LPDDR2. Configuration is supported through both active (AS) and passive (PS) schemes via the industry-standard Altera/Intel configuration schemes, and the device is supported by the Quartus II / Quartus Prime design toolchain. Typical applications include industrial motor control and machine vision, broadcast video processing and pro-AV I/O, automotive driver-assistance pre-processing (non-safety), low-density wireless baseband, telecom line cards, and cost-optimized PCIe endpoint cards. The 484-FBGA package and 28 nm process enable compact, low-power PCB designs while preserving flexibility for post-spin firmware updates. When designing with this device, pay close attention to transceiver channel placement (the 484-FBGA package limits total transceiver count versus larger Cyclone V GX packages), power sequencing requirements (1.1 V core, separate VCCAUX/VCCPLL rails), and DDR3 interface pin assignments per the pinout guidelines in the device handbook. Always validate timing closure in Quartus Prime at the slowest desired speed grade (C8 = commercial, speed grade 8).

USD $112,00 В наличии

5CGXBC7B6M15C7N

5CGXBC7B6M15C7N - 149.5K LE Cyclone V GX FPGA | Intel

The Intel 5CGXBC7B6M15C7N is a Cyclone V GX family field-programmable gate array (FPGA) built on a 28nm low-power process, integrating 149,500 logic elements and 7,880,704 bits of embedded memory in a 484-pin Micro FBGA (BGA-484) package. The device is supplied from a 1.1V core rail and integrates 3.125 Gbps transceiver-capable I/O, twelve 3.125 Gbps transceivers, and 240 user I/O pins optimized for cost- and power-sensitive high-volume designs. Per the Intel Cyclone V Device Overview (CV-51001), the device family simultaneously targets shrinking power, cost, and time-to-market budgets while meeting rising bandwidth requirements. What is an FPGA? A field-programmable gate array is a semiconductor device containing an array of configurable logic blocks (CLBs), programmable interconnect, and hardened I/O and IP blocks that the designer can re-program after manufacture to implement arbitrary digital functions. FPGAs sit hierarchically between general-purpose microcontrollers (fixed ISA, software-defined) and application-specific integrated circuits (ASICs, fixed hardware): FPGAs offer ASIC-like parallel throughput with microcontroller-like design flexibility, while modern FPGAs increasingly embed hard IP such as transceivers, memory controllers, and DSP blocks to close the gap. The 5CGXBC7B6M15C7N integrates twelve 3.125 Gbps GX transceivers, 240 maximum user I/O, and 7,880,704 bits (approximately 8 Mbit) of embedded SRAM arranged as M9K/M10K memory blocks. On-board DSP blocks support variable-precision multiplication for signal processing pipelines. The M15 speed grade balances timing margin against Fmax, while the C7 core-voltage variant (1.1V VCCINT) targets the lowest dynamic power in the family. The 484-ball Micro FBGA package uses a wire-bond BGA topology with 1.0 mm ball pitch. Cyclone V GX FPGAs are typically deployed in industrial motor control, broadcast video processing, wireless baseband pre-processing, PCIe Gen1/Gen2 endpoint bridging, and protocol-conversion line cards. The integrated transceivers eliminate the need for external SerDes chips, reducing BOM cost and board area in mid-range connectivity applications. Designers using Quartus Prime can target this device with a mature IP library including DDR3 controllers, Ethernet MACs, and PCI Express hard IP. Design consideration: the 1.1V VCCINT core and 2.5V/3.3V VCCIO bank supplies must power up in a sequence documented in the Cyclone V device family pin connection guidelines. Multi-rail sequencing with a supervisor such as the Intel MAX II CPLD or a dedicated sequencer is recommended to avoid latch-up. Decoupling per the reference schematic must follow the family datasheet recommendations of approximately 30-40 low-ESR ceramic capacitors per device. This page synthesizes distributor pricing, drop-in compatible same-family Intel variants, and practical Quartus Prime design notes not duplicated by the manufacturer datasheet.

USD $198,40 В наличии

5CGXBC7B7M15C8N

5CGXBC7B7M15C8N - Cyclone V GX FPGA, 149.5K LE, 484-BGA | Intel

The Intel (formerly Altera) 5CGXBC7B7M15C8N is a Cyclone V GX FPGA from the 5CGXC7 logic-density family, integrating 149,500 logic elements, 7,880,704 bits of embedded memory, and 240 user I/O pins in a 484-ball LFBGA (MBGA) package. The device is built on TSMC's 28 nm low-power process, targeting mid-range programmable-logic designs that need integrated transceivers without paying for a high-end transceiver FPGA. A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hard IP such as memory blocks, DSP blocks, and high-speed serial transceivers. Within the broader taxonomy, an FPGA belongs to programmable logic devices (PLD) -> logic ICs -> integrated circuits. FPGAs fill the architectural gap between fixed-function ASICs (high NRE, no flexibility) and microcontrollers (sequential execution, fixed peripherals), enabling hardware-level parallelism and rapid design iteration. Key features include 240 general-purpose user I/O, integrated 3.125 Gbps CPRI/Ethernet-capable transceivers, hard memory controllers, and DSP blocks suited for baseband and signal-conditioning pipelines. The C8 speed grade balances timing margin against Fmax, while the N suffix indicates a lead-free / RoHS-compliant industrial operating range. The M15 code denotes the 484-ball MBGA package with 1.0 mm ball pitch. The Cyclone V GX architecture pairs an 8-channel transceiver block with a hardened PCIe Gen2 IP core, two hard memory controllers (DDR3 up to 800 MHz/800 Mbps), and variable-precision DSP blocks. Embedded multipliers and dedicated routing reduce power by roughly 40% versus the prior Cyclone IV generation at iso-logic density, simplifying thermal design in sealed enclosures. Typical applications include industrial vision and machine-learning edge inference, motor-control and robotic FPGA front-ends, low-density 5G fronthaul / small-cell CPRI aggregation, broadcast video processing, and portable medical imaging where low power and on-chip transceivers matter more than raw logic density. Designers typically pair the 5CGXBC7B7M15C8N with a TI TPS7A4701 LDO for analog rail cleanup and a Micron DDR3L memory for high-bandwidth buffering. Design consideration: the MBGA-484 package requires a 1.0 mm-pitch PCB land pattern with microvia or laser-drilled stacked-via construction on at least four routing layers; the exposed die pad must be soldered with a 0.5 mm grid of thermal vias to the inner ground plane. The Quartus Prime toolchain supports this device in the Standard edition (free). This page synthesizes current distributor pricing, drop-in same-family alternatives, and engineering design notes not collated in the manufacturer datasheet, with verification timestamps tied to the September 2026 web crawl.

USD $149,00 В наличии

5CGXBC7C6F23C7N

5CGXBC7C6F23C7N - Cyclone V GX FPGA, 149.5K LE, FBGA-484 | Intel

The Intel 5CGXBC7C6F23C7N is a Cyclone V GX family field-programmable gate array (FPGA) with 149,500 logic elements, 7,880,704 bits of embedded memory, and a 3.125 Gbps transceiver interface, built on TSMC's 28 nm low-power process and housed in a 484-pin FineLine BGA (FBGA) package. The part operates from a 1.1 V core supply, supports 240 maximum user I/O pins, and integrates six 3.125 Gbps transceivers for high-speed serial connectivity. The device is specified over the commercial 0C to 85C junction temperature range and ships in tray packaging. An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit whose digital logic function is defined after manufacturing via a configuration bitstream loaded into on-chip SRAM. FPGAs sit at the top of the programmable logic hierarchy (FPGA > CPLD > SPLD > PAL/GAL) and offer a parallel fabric of configurable logic blocks (CLBs), embedded multipliers, block RAM, DSP blocks, clock trees, and high-speed transceiver channels. The Cyclone V GX family specifically targets cost-sensitive applications that require integrated transceivers and moderate logic density. The 5CGXBC7C6F23C7N integrates six 3.125 Gbps GX transceivers, 156 18x18 multipliers, 9.4 Mbit of embedded memory, and 240 user I/Os organized into eight I/O banks supporting LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards. Configuration is supported via active serial (AS), passive serial (PS), fast passive parallel (FPP), and JTAG modes, enabling flexible boot from EPCS or EPCQ configuration devices. The part also includes dedicated hard IP for PCI Express Gen1 (x1/x2) and an integrated hard memory controller. From an architecture perspective, the device combines a row/column-based logic fabric with adaptive logic modules (ALMs) and a MultiTrack interconnect that minimizes congestion in fanout-heavy designs. The transceiver tiles support protocols such as Gigabit Ethernet, CPRI, V-by-One, and SMPTE SDI through the Quartus II/Prime transceiver toolkit, allowing engineers to instantiate PHY IPs at design entry rather than buying discrete SERDES. Typical applications include industrial machine vision cameras, broadcast video processing, low-cost wireless backhaul baseband, factory automation controllers, and entry-level software-defined radio platforms. The combination of integrated transceivers and a moderate logic budget makes the device attractive for designers who need more than CPLD density but cannot justify a Cyclone V GT/E or Stratix part. When designing with this FPGA, engineers should treat the FBGA-484 land pattern as a fine-pitch layout challenge requiring 1.0 mm ball pitch and microvia/laser-drilled PCB technology. Decoupling must follow Intel's power distribution network guidelines with both bulk and high-frequency capacitors placed within the inductance budget documented in the Cyclone V device handbook. This page synthesizes distributor pricing, same-package Cyclone V GX drop-in alternatives, and practical board-level design notes that are not compiled in a single place in the manufacturer datasheet.

USD $154,90 В наличии

5CGXBC7C6U19C7N

5CGXBC7C6U19C7N - 149,500 Logic Elements FPGA | Intel | Cyclone V GX

Intel 5CGXBC7C6U19C7N is a Cyclone V GX field-programmable gate array with 149,500 logic elements, 7,880,704 memory bits, and 240 user I/O, housed in a 484-ball FBGA package. These headline figures position it as a high-density member of the Cyclone V GX family for programmable logic, embedded processing, memory-intensive control, and high-throughput interface designs. The device is also identified as a Cyclone V GX 5CGXC7 U19 device by its ordering code and package designation. A field-programmable gate array is an integrated circuit containing configurable logic blocks, programmable interconnects, memory resources, and I/O circuitry. Within the semiconductor hierarchy, an FPGA belongs to programmable logic ICs; FPGA is both the commonly used abbreviation and the functional description for a field-programmable gate array. Unlike a fixed-function application-specific integrated circuit, an FPGA can be configured after manufacturing, allowing designers to implement custom digital functions, interface protocols, control logic, and signal-processing datapaths on one device. The verified headline resources are 149,500 logic elements, 7,880,704 bits of embedded memory, and 240 I/O. Its 484-FBGA package uses ball terminals and a square package body, while the ordering code identifies the U19 package variant. The large logic capacity supports parallel logic and datapath implementation, while 7,880,704 memory bits provide significant on-chip storage for buffers, FIFOs, lookup tables, and data-processing state. The 240-I/O count allows broad connectivity to external memories, converters, network interfaces, and control peripherals. Cyclone V GX devices combine programmable logic with FPGA resources intended for digital systems requiring flexible interfaces and substantial parallel processing. The configuration fabric, embedded memory, and programmable I/O let engineers adapt timing, protocol, and data-width requirements without replacing the entire silicon device. When a design changes, the logic image can generally be revised, subject to the device's available resources, power architecture, I/O constraints, and supported configuration implementation. Typical applications include industrial imaging and machine-vision control, communications and networking equipment, test and measurement, video or display processing, and embedded control systems. These uses benefit from 149,500 logic elements for parallel processing, 7,880,704 memory bits for buffering and state, and 240 I/O for connecting multiple external functions. Engineers should still confirm speed grades, I/O-bank restrictions, transceiver requirements, power sequencing, and temperature specifications in the manufacturer datasheet before releasing a design. One key design consideration is resource planning. The verified figures do not establish usable logic-element utilization, supported memory configurations, clock limits, transceiver capability, or exact package dimensions. Reserve margin for routing, timing closure, configuration circuitry, and interface synchronization rather than treating the headline counts as fully available capacity. Exact pinout, thermal data, and operating ratings remain datasheet-dependent. This page synthesizes the verified distributor specifications, official Altera product-page data, explicit data gaps, application context, and strict drop-in-only alternative rules. Pricing is shown as of 2026-09-05, while no drop-in replacement is asserted without a verified cross-reference showing the same package and pin compatibility.

Запрос цены В наличии

5CGXBC7C7F23C8N

5CGXBC7C7F23C8N - Cyclone V GX FPGA, 149.5K LE, 484-FBGA | Intel

The Intel (formerly Altera) 5CGXBC7C7F23C8N is a Cyclone V GX FPGA from the 5CGXC7 logic-density family, integrating 149,500 logic elements (LEs), 7,880,704 bits of embedded memory, and 240 user I/O pins in a 484-ball FineLine BGA package. Built on TSMC's 28nm low-power process, the device operates from a 1.1 V core supply and is offered in a commercial temperature grade, with six 3.125 Gbps transceivers for high-speed serial connectivity. A Field Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable routing, and dedicated hardware resources such as block RAM, DSP blocks, PLLs, and high-speed transceivers. FPGAs sit within the programmable logic hierarchy: FPGA -> programmable logic -> logic IC -> integrated circuit -> semiconductor. Unlike fixed-function ASICs, FPGAs are reprogrammed in-circuit, enabling rapid prototyping, hardware acceleration, and field upgrades. The Cyclone V GX family specifically targets cost- and power-sensitive applications that still require integrated transceivers and moderate logic capacity. Key features of the 5CGXBC7C7F23C8N include 149,500 LEs, 7,880,704 bits of embedded RAM (approximately 963 Kbytes), 312 embedded 18x18 multipliers, six 3.125 Gbps transceivers, and two hard memory controllers. The integrated transceivers eliminate the need for external PHY devices, reducing BOM cost and board area for serial-protocol interfaces such as PCIe Gen1, GbE, and CPRI. The 484-FBGA package provides 240 user I/O pins supporting LVDS, LVTTL, LVCMOS, and other single-ended and differential I/O standards. Architecturally, the Cyclone V GX FPGA combines an 8-input adaptive logic module (ALM) fabric, variable-precision DSP blocks, and a hard memory controller subsystem. The 28nm process and an optimized core architecture deliver up to 40% lower power than the prior-generation Cyclone IV family, while the integrated transceivers support protocols up to 3.125 Gbps with integrated PCIe hard IP. This combination makes the device well-suited to bridge between digital logic and high-speed serial interfaces without the area and power penalty of soft IP. Typical applications include industrial motor control and factory automation, video surveillance and image processing, wireless backhaul baseband, broadcast video bridging, military and aerospace digital signal processing, and embedded vision systems. The commercial temperature grade (0C to 85C) supports controlled-environment deployments such as indoor industrial racks, lab instrumentation, and commercial-grade video platforms. Designers should plan clocking carefully - the device includes up to 16 global clock networks and dedicated PLLs, but high-utilization designs benefit from a Quartus Prime clock planning early in the flow. Power estimation with the Early Power Estimator (EPE) spreadsheet before RTL commit avoids thermal surprises, especially when transceivers are active. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet, helping engineers evaluate 5CGXBC7C7F23C8N for both new designs and Cyclone IV refresh paths.

USD $29,70 В наличии

Подкатегории

Товары (32725)