Интегральные схемы

5CGXBC7C7U19C8N

5CGXBC7C7U19C8N - Cyclone V GX FPGA, 149.5K LE | Intel

The Intel 5CGXBC7C7U19C8N is a Cyclone V GX family field-programmable gate array (FPGA) offering 149,500 logic elements, 7,880,704 bits of embedded memory, and 240 general-purpose user I/Os, housed in a 484-pin FineLine BGA (UBGA) package. It integrates up to 9 transceivers capable of 3.125 Gbps operation, providing a cost-optimized silicon platform for mid-range programmable logic designs that previously required ASICs. An FPGA (Field-Programmable Gate Array) is a semiconductor device built around a matrix of configurable logic blocks (CLBs), programmable interconnects, and dedicated hard IP blocks such as transceivers, DSP blocks, and embedded memory. FPGAs sit in the hierarchy of programmable logic devices (PLDs) -> programmable logic -> logic IC -> integrated circuit. Unlike an ASIC, an FPGA's function is defined after manufacture by loading a user bitstream into on-chip SRAM configuration memory, allowing rapid prototyping and field upgrades. Cyclone V is positioned at the low-power, low-cost end of Intel's FPGA portfolio. Key differentiating features include six general-purpose PLLs, two hard memory controllers, two PCIe hard IP blocks (Gen1/Gen2 capable), and 156 embedded 18x18 multipliers supporting DSP workloads up to 156 GMACs. The device supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards with hot-socketing capability. The 28 nm TSMC low-power process delivers a typical power envelope of less than 1.5 W at full utilization in static conditions. The architecture combines logic fabric, M10K SRAM blocks (446 blocks total), MLABs, and a hardened peripheral set. Transceivers support CPRI, PCIe Gen1/2, Gigabit Ethernet, and SGMII protocols through soft PCS layers, removing external PHY components in many wireless backhaul and industrial connectivity designs. Typical applications include industrial motor control, video surveillance and broadcast bridging, PCIe endpoint cards, low-density wireline backhaul, and factory automation. The combination of transceivers, DSP, and PCIe makes it suitable for cost-sensitive designs that previously required mid-range Cyclone IV + external PHY solutions. When designing with this device, allocate sufficient decoupling across the 484-ball UBGA - VCCINT and VCCA require low-impedance bulk decoupling within 100 mils of the balls. Thermal management typically relies on a heat-spreader for industrial temperature operation, and the bitstream compression feature reduces configuration flash size by up to 60 percent. This page synthesizes distributor pricing, same-package drop-in alternatives from the Cyclone V family, and practical PCB/thermal design notes not consolidated in any single manufacturer document.

USD $76,80 В наличии

5CGXBC7D6F27C7N

5CGXBC7D6F27C7N - Cyclone V GX FPGA, 149.5K LE, 672-FBGA | Altera

The Altera 5CGXBC7D6F27C7N is a Cyclone® V GX Field Programmable Gate Array built on a 28 nm TSMC process, delivering 149,500 logic elements with 7,880,704 bits of embedded memory in a 672-pin fine-pitch BGA (FBGA) package. The device integrates up to 12 transceivers capable of 3.125 Gbps operation, supporting PCIe Gen2 x4 hard IP, making it suitable for cost-sensitive wired- and wireless-protocol bridging designs. A Field Programmable Gate Array (FPGA) is a reprogrammable semiconductor that lets engineers implement arbitrary digital logic, memory, and high-speed serial interfaces on a single die. Within the broader taxonomy, FPGAs sit alongside ASICs and CPLDs as the programmable-logic tier of the integrated-circuit hierarchy, with Cyclone V positioned as Altera's (now Intel) low-power, high-volume mid-range FPGA family. The GX variant adds multi-gigabit transceivers for serial-protocol applications that pure logic-only Cyclone E parts cannot address. Key features of the 5CGXBC7D6F27C7N include 156 18x18 multipliers for DSP, 9 PLL/VCO pairs distributed across the die, dedicated 3.125 Gbps transceivers, hard memory controllers, and support for LPDDR2/DDR3 external memory interfaces. It runs a core voltage of 1.1 V with 0.85 V auxiliary supply. Compared with earlier Cyclone IV parts, the 28 nm process delivers roughly 2x logic density and 40% lower dynamic power at equivalent performance. The architecture combines Logic Array Blocks (LABs), embedded SRAM organized in M9K blocks, variable-precision DSP blocks, and routing optimized for high-utilization designs. Hard IP blocks for PCIe Gen2, EMAC, and JTAG offload common protocol work from fabric, freeing LUTs for application logic. Typical applications include industrial machine vision frame grabbers, motor-control inverters, low-cost PCIe endpoint cards, video processing and broadcast bridges, and protocol-conversion adapters in telecom backhaul. The combination of integrated transceivers and PCI Express hard IP makes it particularly attractive for embedded compute and industrial IoT edge nodes. When designing with the 5CGXBC7D6F27C7N, observe Altera's power-sequencing requirements (VCC and VCCA must ramp monotonically), maintain a thermal management plan because full fabric utilization at high toggle rates can exceed 5 W, and verify signal-integrity margins on the 672-ball FBGA with controlled-impedance PCB stack-up.

USD $261,55 В наличии

5CGXBC7D6F31C7N

5CGXBC7D6F31C7N - Cyclone V GX FPGA, 149.5K LE, 896-FBGA | Intel

The Intel 5CGXBC7D6F31C7N is a Cyclone® V GX field-programmable gate array (FPGA) integrating 149,500 logic elements, 7,880,704 bits of embedded memory, and 480 user I/Os in a 896-ball FineLine BGA package. Built on TSMC's 28 nm low-power process, the device operates from a 1.1 V core supply and supports transceiver data rates up to 3.125 Gbps through its integrated 6.144 Gbps-capable transceivers. An FPGA (field-programmable gate array) is a semiconductor device containing configurable logic blocks (CLBs), programmable interconnects, dedicated DSP blocks, and on-chip memory that the designer can program after manufacture. Within the broader hierarchy, FPGAs sit alongside CPUs, GPUs, and ASICs as reconfigurable compute fabrics; the Cyclone V family specifically targets cost- and power-sensitive applications requiring moderate logic density and integrated transceivers. The 5CGXBC7D6F31C7N differentiates itself through 8 integrated transceivers supporting protocols such as PCIe Gen2 and Gigabit Ethernet, 156 18x18 multipliers for DSP workloads, and hard IP for memory controllers (DDR3, LPDDR2). It also integrates hard PCI Express Gen2 controllers and a Hard Memory Controller block, eliminating soft-IP overhead and reducing FPGA logic utilization. The 1.1 V core combined with the 28 nm process typically yields 40-60% lower power than the previous-generation Cyclone IV family at equivalent performance. Architecturally the device pairs the FPGA fabric with embedded transceiver channels, PLLs, and dedicated PCIe Gen2 IP blocks. Designers access the silicon through Intel Quartus Prime, which provides synthesis, place-and-route, timing analysis, and embedded software toolchains. The 896-pin FBGA package uses Intel's 31 mm × 31 mm FineLine BGA outline, with 1.0 mm ball pitch enabling PCB escape routing with standard 4-layer stack-ups. Typical deployments include industrial video-processor bridges, machine-vision frame grabbers, motor-control and factory-automation platforms, software-defined radio front ends, and low-cost line cards requiring 1G/10G aggregation. The 480 user I/Os make the device attractive for I/O-intensive aggregator and protocol-conversion designs. When designing with the 5CGXBC7D6F31C7N, allocate at least four PCB layers for power, ground, and two high-speed signal layers, and place 100 µF + 1 µF + 0.1 µF decoupling groups within 5 mm of each supply pin. Quartus Prime power analysis should be run against the post-fit netlist to verify junction temperature against the -40 °C to +85 °C commercial ambient range.

USD $312,00 В наличии

5CGXBC7D7F27C8N

5CGXBC7D7F27C8N - Cyclone V GX FPGA, 149.5K LE, 672-BGA | Intel

The Intel 5CGXBC7D7F27C8N is a Cyclone V GX family Field-Programmable Gate Array (FPGA) built on TSMC's 28 nm low-power process, integrating 149,500 logic elements, 7,880,704 bits of embedded memory, and 364 18x18 multipliers inside a 27 mm x 27 mm 672-ball FineLine BGA package. Per Intel Cyclone V device handbook data, the device exposes 9 transceivers (3.125 Gbps each, configurable as PCI Express Gen2 root port or external PHY link), 364 user I/O, and 12.5 Mb of M10K block RAM. The 'C8N' speed-grade suffix denotes the 8 ns commercial speed grade operating across 0 to 85 C junction temperature, with 'N' indicating lead-free / Pb-free assembly. A Field-Programmable Gate Array is a reconfigurable digital integrated circuit that lets designers implement arbitrary combinational and sequential logic through a user-supplied bitstream, in contrast to an ASIC whose function is fixed at fabrication. FPGAs sit at the apex of the programmable-logic hierarchy - above CPLDs and below structured ASICs - and combine programmable logic fabric, distributed RAM, hard DSP blocks, high-speed transceivers, and on-chip PLLs/PCMs into a single device. Key differentiating features of the 5CGXBC7D7F27C8N include integrated 3.125 Gbps transceivers (a differentiator versus the Cyclone V E family that lacks SERDES), a hard PCIe Gen2 IP block (x1/x2/x4), hard memory controllers for DDR3/DDR2/LPDDR2, and 8-input adaptive logic modules (ALMs) that deliver roughly 1.7x the logic capacity of the previous Cyclone IV generation per mW. The 672-pin FBGA package exposes the full transceiver and I/O count required for industrial and video-bridging designs. Typical applications include industrial machine vision over CoaXPress or GigE Vision, low-cost PCIe Gen2 endpoint cards, motor-control and encoder interfaces, broadcast video bridging, and software-defined radio front-end pre-processing. The transceiver-rich variant (GX) is preferred over the plain E variant wherever multi-gigabit serial links are required.

USD $228,50 В наличии

5CGXBC7D7F31C8N

5CGXBC7D7F31C8N - Cyclone V GX FPGA, 149.5K LE, 896-FBGA | Intel

The Intel (formerly Altera) 5CGXBC7D7F31C8N is a Cyclone® V GX field-programmable gate array (FPGA) with 149,500 logic elements, 7,880,704 bits of embedded memory, and 480 user I/O pins, housed in a 896-ball FineLine BGA (FBGA) package. Built on TSMC's 28 nm low-power process, it integrates up to 9 transceivers capable of 3.125 Gbps operation, hard PCI Express® Gen2 endpoints, and dedicated DSP blocks, making it suited for cost- and power-sensitive mid-range designs. A field-programmable gate array (FPGA) is a semiconductor integrated circuit that can be reconfigured by the customer after manufacture to implement arbitrary digital logic. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs), distinct from fixed-function ASICs by their post-fabrication flexibility and from microcontroller units (MCUs) by their parallel, hardware-timed execution model. Within Intel's portfolio, the Cyclone V family is positioned as the low-power, cost-optimized series for high-volume applications such as industrial motor control, video bridging, and machine-to-machine connectivity. Key features include 149,500 logic elements (LEs), 7,880,704 embedded memory bits (approximately 963 Kbits of M10K plus 1.46 Mbits of MLAB), 312 DSP blocks of 18x18 multipliers, nine full-duplex 3.125 Gbps transceivers, two hard PCI Express Gen2 x1/x2/x4 endpoints, and eight PLLs. The 5CGXBC7D7F31C8N speed grade 8 (commercial, -8C) variant supports core VCC of 1.1 V with hot-socketing capability and configuration via passive serial, fast passive parallel, JTAG, or encrypted bitstream using AES-256. The Cyclone V GX architecture combines a fabric of adaptive logic modules (ALMs), dedicated block RAM, DSP slices, and hard IP for PCIe, memory controllers, and high-speed serial I/O. This heterogeneous structure lets designers implement protocol bridging, signal processing, and control logic in a single device without consuming fabric resources for functions that are hardened in silicon. Typical applications include industrial Ethernet switching and fieldbus gateways, video broadcast and surveillance processing, PCIe endpoint cards, motor drive control loops, and low-cost wireless baseband preprocessing. The transceiver-rich 5CGXC7 die (F31 package, 31 mm × 31 mm body, 1.0 mm pitch) targets designs that previously required a more expensive Arria or Stratix device. When designing with this part, plan power-rail sequencing for 1.1 V core, 2.5 V/3.3 V auxiliary, and 1.5 V transceiver supplies, and respect the 896-ball BGA layout with 4 or 6 PCB layers and microvia stackups. Quartus II / Quartus Prime software with device support file 5CGXFC7D6 is required for synthesis, place-and-route, and bitstream generation. This page combines drop-in same-family alternatives, parameter-by-parameter comparison, and practical PCB design notes that complement, rather than duplicate, the device datasheet and ordering information.

USD $198,00 В наличии

5CGXBC9A6U19C7N

5CGXBC9A6U19C7N - Cyclone V GX FPGA, 77K LE, 484-FBGA | Intel

The Intel 5CGXBC9A6U19C7N is a Cyclone® V GX field-programmable gate array (FPGA) in the 484-ball FineLine BGA (U19) package, integrating 77,000 logic elements, 4,460 Kbits of embedded memory (M9K blocks totaling 14,251,008 bits), and 301,000 registers in a low-power 28 nm process. The device belongs to the 5CGXC9 speed/logic-density tier of the Cyclone V GX family and includes integrated transceivers supporting common serial protocols, hard memory controllers, and variable-precision DSP blocks for signal-processing pipelines. What is a Cyclone V GX FPGA? An FPGA (field-programmable gate array) is a programmable logic device whose logic, memory, and interconnect are defined by bitstream configuration rather than fixed silicon wiring. Cyclone V GX sits in the low-power mid-range of the FPGA hierarchy, positioned between low-density CPLDs/legacy FPGAs and high-end transceiver-rich families; within Intel's portfolio, Cyclone V GX is below Cyclone 10 GX, Arria-series, and Stratix-series FPGAs in logic capacity and transceiver bandwidth. Key features include 6 PLLs for clock synthesis, dedicated 18x18 multipliers for DSP, and on-chip hard PCIe Gen2/Gen3-capable controllers in some package variants. The 5CGXC9 tier offers 77K logic elements (the 5CGXBC7 tier, by contrast, provides 149.5K LEs), enabling differentiated cost/performance points within the same family footprint. The integrated 3.125 Gbps transceivers reduce BOM cost for serial-interface designs versus external PHY implementations. Architecture-wise, the device uses an SRAM-based logic fabric combined with embedded hard IP blocks: transceivers, PCIe controllers, PLL/IOE structures, and DSP slices. Power gating and clock-gating features target static and dynamic power reduction, while the Quartus Prime toolchain provides synthesis, place-and-route, and timing closure. The 'C7' speed grade and 'N' lead-free designator indicate commercial temperature range (0°C to +85°C) and Pb-free assembly. Typical applications include industrial machine vision, factory automation controllers, motor control front-ends, video/display bridging, low-cost PCIe endpoint cards, motor drive feedback, and embedded vision pre-processing. The on-chip transceivers also suit industrial serial links such as SDI, GigE Vision, and Camera Link replacement designs. Design consideration: pay attention to transceiver channel count per package variant - the U19 484-FBGA offers a specific IO/transceiver complement that may differ from larger U19 or F27/F31 packages of the same family. Always verify pinout in the device datasheet before PCB layout. This page synthesizes Intel datasheet specifications, distributor pricing, drop-in alternative coverage from the Site MPN list, and practical design notes not found on a single manufacturer page.

USD $228,00 В наличии

5CGXBC9A7U19C8N

5CGXBC9A7U19C8N - Cyclone V GX FPGA, 301K LE, 484-FBGA | Intel

The Intel (formerly Altera) 5CGXBC9A7U19C8N is a high-density Cyclone V GX Field Programmable Gate Array (FPGA) delivering 301,000 logic elements and 14,251,008 bits of embedded memory in a 484-ball FineLine BGA package. The part is rated for the commercial (0C to 85C) operating range, with the speed grade 8 silicon and the C8N ordering code denoting a standard, non-AEC-Q100 device. The Cyclone V GX family integrates transceivers and a hard PCIe Gen2 IP block, making this part targeted at cost-sensitive mid-range designs that require moderate transceiver throughput rather than maximum logic density. A Field Programmable Gate Array (FPGA) is a programmable semiconductor device whose logic fabric, routing, and I/O behavior are defined by a user-loaded configuration bitstream. The Cyclone V GX family sits within Intel's broader FPGA hierarchy: it is a low-power variant of the Cyclone V series optimized for ASIC-prototyping, industrial motor control, video bridging, and small-form-factor wireless baseband. Compared with the lower-cost Cyclone V E family, GX devices add 3.125 Gbps transceivers and a PCIe Gen2 hard IP block; compared with the higher-end Cyclone V GT family, GX parts reduce transceiver count and target lower static power. Key features of the 5CGXBC9A7U19C8N include 14,251,008 bits (approximately 1.66 MB) of embedded SRAM, 240 DSP blocks for fixed- and floating-point signal processing, six 3.125 Gbps transceiver channels suitable for PCIe Gen2 x1/x2 and SGMII, and 560 user I/O pins. The device is fabricated in TSMC's 28 nm low-power process and supports configuration via JTAG, Active Serial (AS), or Passive Serial (PS) modes. Hard memory controllers and PHY blocks support DDR2/DDR3/LPDDR2 external memory interfaces. Typical applications for the 5CGXBC9A7U19C8N include industrial machine vision frame grabbers, motor-control and encoder-interfacing PLCs, low-cost PCIe I/O cards, video format converters (HDMI/DVI/DisplayPort bridging), and small-cell wireless backhaul. The 484-FBGA package is a standard JEDEC MS-034 footprint family, suitable for high-density 4-layer to 8-layer PCBs with controlled-impedance routing. When designing with this part, plan the PCB stack-up before pin assignment because the 484-ball FBGA forces strict length-matched routing for the transceiver lanes and the DDR3 byte groups. Quartus Prime Lite (free) supports this device, simplifying low-cost development. The page below synthesizes distributor pricing, same-family Cyclone V drop-in alternatives, and practical design notes that are not collected in the manufacturer handbook.

USD $219,75 В наличии

5CGXBC9C6F23C7N

5CGXBC9C6F23C7N - Cyclone V GX FPGA, 301K LE, 484-FBGA | Intel

The Intel (Altera) 5CGXBC9C6F23C7N is a Cyclone V GX family Field-Programmable Gate Array delivering 301,000 logic elements and 13,917 Kbits of embedded memory in a 484-ball FineLine BGA package. It features 224 general-purpose I/O pins, six integrated 3.125 Gbps transceivers, and operates from a 1.13 V core supply with a maximum toggle frequency of 800 MHz. The device is built on TSMC's 28 nm low-power process and targets cost-sensitive applications that still require integrated high-speed serial connectivity. What is a Cyclone V GX FPGA? A Cyclone V GX FPGA is a mid-range, low-power programmable logic device from Intel's Cyclone V family that combines general-purpose logic fabric with multi-gigabit transceivers (MGTs) on a single die. The Cyclone V family sits within Intel's broader product taxonomy: Cyclone V FPGA -> low-power FPGA family -> FPGA -> programmable logic device -> semiconductor IC. The GX variant specifically adds up to six 3.125 Gbps transceivers, making it the lowest-cost Intel/Altera FPGA with integrated multi-gigabit serial links and differentiating it from the E (logic-only), GT (transceiver + memory), and SX/ST (ARM Hard Processor System) variants. Key features include 224 GPIO organized in 11 banks, integrated 6.144 Mbit transceiver PMA block, dedicated 8-input adaptive logic modules (ALMs), and embedded hard IP blocks including PLLs, memory controllers, and PCIe Gen2 hard IP. The 5CGXBC9 prefix indicates the 9-series (highest density) device with six transceivers (BC9 family code). The Cyclone V GX architecture combines a fabric of LABs (Logic Array Blocks), M20K SRAM blocks, DSP blocks, and hard PCIe Gen2 controllers with up to six 3.125 Gbps transceivers per side. This heterogeneous architecture reduces power by approximately 40% compared to the prior Cyclone IV generation while delivering higher logic density and DSP throughput. Typical applications include industrial motor control and machine vision, broadcast video processing, low-cost wireless backhaul, video surveillance DVR/NVR, and PCIe Gen2 endpoint cards. The integrated transceivers make the device particularly suited for designs that previously required an FPGA plus an external PHY. When designing with this device, allocate sufficient BGA fanout escape routing on at least 6 PCB layers and provide a clean 1.13 V core rail with sub-milliohm PDN impedance to meet 3.125 Gbps link margin. Decoupling strategy should follow Intel's Cyclone V PDN guide: 0402 ceramic caps placed directly under each transceiver lane and bulk capacitors within 50 mm of the FBGA footprint. This page synthesizes distributor pricing, Cyclone V GX drop-in alternatives, and practical high-speed design notes that go beyond the manufacturer datasheet summary.

USD $334,20 В наличии

5CGXBC9C7F23C8N

5CGXBC9C7F23C8N - Cyclone V GX FPGA, 301K LE, 484-FBGA | Intel

The Intel 5CGXBC9C7F23C8N is a Cyclone® V GX family Field-Programmable Gate Array (FPGA) IC featuring 301,000 logic elements, 14,251,008 bits of embedded memory, and 224 general-purpose I/O pins, fabricated on a 28nm low-power process and housed in a 484-ball FineLine BGA (FBGA) package. The 'C' speed grade and '8' core suffix designate the commercial temperature range with a 1.1V core supply, while 'N' indicates a lead-free, RoHS-compliant package finish. Integrated 3.125 Gbps transceivers and a hard memory controller make it suitable for cost-sensitive serial-protocol applications. What is a Cyclone V GX FPGA? The Cyclone V GX is Intel's (formerly Altera's) low-power, mid-density FPGA family targeting cost-optimized designs that require integrated transceivers. Within the broader taxonomy, it sits as: FPGA -> programmable logic device -> semiconductor IC -> logic. The 'GX' variant adds up to 12 integrated 3.125 Gbps multi-gigabit transceivers, distinguishing it from the E (enhanced logic/memory) and GT (transceiver-equipped) family siblings. Compared with discrete logic or ASIC implementations, the Cyclone V GX delivers ASIC-like unit economics at NRE cost zero, with the flexibility of in-system reprogrammability for evolving interface standards. Key features include 9.4 Mbits of embedded SRAM (MLAB + M20K blocks), 156 18x19 multipliers, 4 PLLs, and a hard PCI Express Gen2 x4 controller. The device also embeds two hard memory controllers supporting DDR3, DDR2, and LPDDR2 interfaces, eliminating soft-IP overhead for common memory subsystems. Architecturally, the 5CGXBC9 uses an Adaptive Logic Module (ALM) of 8-input fracturable look-up tables combined with variable-precision DSP blocks, achieving up to 133 GMACs of fixed-point throughput while drawing as little as 1.05W typical quiescent power. The integrated 3.125 Gbps transceivers consume approximately 100 mW per channel at full utilization, enabling single-chip connectivity for protocols such as PCIe Gen2, Gigabit Ethernet, CPRI, and JESD204B. Typical applications include industrial motor control and machine vision, low-cost PCIe endpoint cards, broadband access equipment (PON/ONT), broadcast video processing, and software-defined radio front-ends. The combination of transceivers, DSP blocks, and DDR3 controllers also makes it suitable for low-latency packet processing and embedded vision pipelines in factory automation. When designing with this part, ensure the FBGA-484 footprint includes 0.4 mm solder-ball pitch, microvia-compatible PCB stack-up, and matched-length routing for transceiver channels. The core 1.1V supply must ramp within the datasheet's monotonic power-sequencing window; use a sequencer IC if your system shares rails with other large devices. This page synthesizes distributor pricing, drop-in package-compatible Cyclone V GX alternatives, and practical design considerations not consolidated in the manufacturer datasheet, giving engineers a single decision-ready reference.

USD $54,80 В наличии

5CGXBC9D6F27C7N

5CGXBC9D6F27C7N - Cyclone V GX FPGA, 301K LE, FBGA-672 | Intel

The Intel 5CGXBC9D6F27C7N is a Cyclone V GX family Field-Programmable Gate Array (FPGA) built on a 28 nm low-power process, integrating 301,000 logic elements, 14,251,008 bits of embedded memory, and 336 hardware multipliers (18x18) in a 672-ball FineLine BGA package. The device supports transceiver counts per the GX family specification, an on-chip PCIe hard IP block, and a 1.1 V core supply with 3.3 V/2.5 V multi-voltage I/O support. A Field-Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that allows designers to configure digital logic blocks, interconnect, and I/O after manufacture. FPGAs sit at the top of the programmable logic hierarchy: programmable logic device (PLD) -> Complex PLD (CPLD) -> FPGA -> System-on-Chip FPGA. Within Intel's portfolio, Cyclone V belongs to the low-power, cost-optimized family targeting volume production, positioned below Cyclone 10 and Stratix families in cost-per-logic-element while offering integrated transceivers and hard PCIe that discrete CPLDs cannot match. Key features include up to 3.125 Gbps transceiver data rate, embedded PCIe Gen1/Gen2 hard IP, hard memory controllers for DDR3, fractional PLLs for clock synthesis, and configuration via passive serial (AS), fast passive parallel (FPP), or JTAG. The 672-ball FBGA package exposes 364 user I/O pins (varies by bank configuration) and supports industrial-grade temperature ranges when ordered with the C7N speed/temperature grade. The Cyclone V GX architecture combines an Adaptive Logic Module (ALM)-based core fabric with dedicated DSP blocks, M20K embedded memory blocks, and hardened protocol IP (PCIe, Ethernet MAC, memory controllers). This heterogeneous architecture delivers deterministic timing closure at lower dynamic power than previous-generation FPGAs while reducing reliance on soft IP for common interfaces. Typical applications include industrial machine vision and factory automation controllers, video surveillance and broadcast video processing, low-cost wireline communication line cards, motor control and industrial drive interfaces, and PCIe-based protocol bridging add-in cards. The integrated transceivers and PCIe hard IP make it well-suited for protocol conversion between legacy parallel buses and high-speed serial links. When designing with this device, ensure proper decoupling on each power rail per Intel's Cyclone V device family pin connection guidelines, and validate transceiver channel placement against the Quartus II fitter reports before PCB fabrication. The 672-ball FBGA requires microvia-compatible PCB stackups and assembly under controlled thermal profiles. This page synthesizes distributor pricing, same-brand and cross-brand drop-in alternatives, and practical design considerations not found in the manufacturer datasheet alone, helping engineers select and source the right Cyclone V GX variant.

USD $289,00 В наличии

5CGXBC9D7F27C8N

5CGXBC9D7F27C8N - Cyclone V GX FPGA, 113K LE, 672-BGA | Intel

The Intel (formerly Altera) 5CGXBC9D7F27C8N is a Cyclone® V GX field-programmable gate array (FPGA) integrating 113,560 logic elements, 14,251,008 bits of embedded memory (about 6,876 Kbits of M10K plus 657 Kbits of MLAB), and 156 18x18 multipliers inside a 672-ball FineLine BGA package. It implements the 5CGXC9 logic-density tier with 9 transceivers, dual ARM Cortex-A9 hard processor subsystem absent (logic-only), industrial temperature grade, 0.9 ns core speed grade 8. What is an FPGA? A field-programmable gate array is a semiconductor IC containing configurable logic blocks (CLBs), programmable routing, and I/O cells that the designer can wire up after fabrication. In the broader taxonomy, an FPGA belongs to programmable logic devices (PLD) -> logic ICs -> integrated circuits, and competes with ASICs and microcontrollers in applications requiring high parallelism or hardware-level latency. The Cyclone V family is the mid-density, low-power FPGA lineup from Intel PSG targeting cost-sensitive industrial, video, and communication designs. Key features of the 5CGXBC9D7F27C8N include 336 user I/O pins (split into 9 I/O banks), 4 phase-locked loops (PLLs), 9 full-duplex 3.125 Gbps transceivers (GX variant), hard memory controller, and hard PCI Express Gen2 x4 IP block. The -8 speed grade combined with the industrial temperature range (-40C to +100C) makes this part a workhorse for industrial video, motor control, and embedded instrumentation. Configuration is supported via JTAG, Active Serial, Passive Serial, and Fast Passive Parallel modes. Architecturally the device is built on TSMC's 28 nm low-power process, giving it a typical core current draw well below 1.5 W at full utilization. The transceivers integrate their own clock-data recovery, encoding (8B/10B), and word alignment so protocol stacks such as PCIe Gen2, GbE, CPRI, SATA, and SGMII can be implemented without external PHY chips. Hardened PCIe Gen2 x4 IP cuts soft-logic footprint and latency versus a pure soft implementation. Typical applications include industrial machine vision cameras, broadcast video processing (SDI to HDMI bridging), handheld ultrasound imaging, motor drives and encoder interfaces, factory automation controllers, and PCIe-based data-acquisition cards. The integrated 3.125 Gbps transceivers also suit low-channel-count wireless backhaul and SONET/SDH-style telecom. When designing with this device, allocate at least four PCB layers with a continuous ground plane below the BGA; the 672-ball 27 mm x 27 mm package requires via-in-pad or dog-bone fan-out. Use the Intel Quartus Prime Lite (free) toolchain for synthesis and place-and-route. Plan for at least one bank dedicated to a 2.5 V or 3.3 V LVCMOS reference for legacy interfaces, and review the pin connection guidelines for unused transceiver channels. This page synthesizes distributor pricing, drop-in package-compatible Cyclone V GX alternatives, and practical Quartus design notes that are not contained in the manufacturer datasheet, giving you a single engineering-ready view of the 5CGXBC9D7F27C8N.

USD $370,00 В наличии

5CGXBC9E6F31C7N

5CGXBC9E6F31C7N - Cyclone V GX FPGA, 301K LE, 896-FBGA | Intel

The Intel (formerly Altera) 5CGXBC9E6F31C7N is a Cyclone® V GX Field-Programmable Gate Array (FPGA) delivering 301,000 logic elements, 14,251,008 bits of embedded memory, and 480 user I/O pins in a 896-ball FineLine BGA (FBGA) package. It is fabricated on a 28 nm TSMC low-power process and operates from a 1.1 V core supply, with a maximum internal clock frequency of 800 MHz. The device integrates up to 12 integrated 3.125 Gbps transceivers for high-speed serial connectivity, supporting PCIe Gen2, GbE, CPRI, and Serial RapidIO protocols. A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit whose logic function is defined after manufacturing by a configuration bitstream loaded into on-chip SRAM. FPGAs sit hierarchically between fixed-function Application-Specific Integrated Circuits (ASICs) and general-purpose processors, combining hardware-level parallelism with software-defined reconfiguration. Within the broader category of programmable logic, the Cyclone V family targets cost- and power-sensitive applications, positioned below the high-end Stratix family and above the entry-level MAX series. Cyclone V GX adds integrated transceivers and a hard PCIe Gen2 IP block for connectivity-oriented designs. Key features of the 5CGXBC9E6F31C7N include 8-input adaptive logic modules (ALMs) for fine-grained DSP and arithmetic pipelines, variable-precision DSP blocks supporting 18x18 and 27x27 multipliers, and dedicated hard memory controllers for DDR3, DDR2, and LPDDR2 external memory. The device also provides up to four PLL clock managers and 12 global clock networks, enabling jitter-clean distribution across the fabric. On-chip security features include AES-256 configuration bitstream encryption and JTAG-based IEEE 1149.1 boundary-scan support. The 5CGXBC9E6F31C7N is designed using Intel's Quartus Prime design software, which provides synthesis, place-and-route, timing analysis, and bitstream generation through the standard FPGA tool flow. Designers describe logic in Verilog, SystemVerilog, or VHDL, then target specific logic elements, DSP blocks, memory blocks, and IOE features. Compared to ASIC design, this FPGA enables rapid prototyping and field-upgradable products with no NRE charges. Typical applications for the 5CGXBC9E6F31C7N include industrial machine vision, video broadcast equipment, motor control, software-defined radio (SDR), and PCIe-based I/O cards. The combination of high logic density, integrated transceivers, and low static power makes it well suited for cost-sensitive embedded systems requiring custom high-speed serial interfaces and DSP pipelines. When designing with this device, allocate sufficient PCB area for the 31 mm x 31 mm 896-FBGA package and follow Intel's PCB layout guidelines for impedance-controlled 100-ohm differential pairs for transceiver channels, and a multi-layer stackup with continuous ground planes beneath the BGA. Decoupling requires multiple bulk and high-frequency ceramic capacitors placed close to all VCCINT, VCCA, and VCCD_PLL pins per the Quartus power analysis report.

USD $348,00 В наличии

5CGXBC9E6F35C7N

5CGXBC9E6F35C7N - Cyclone V GX FPGA, 301K LE, 35C7 Speed | Intel

The Intel 5CGXBC9E6F35C7N is a Cyclone® V GX family Field Programmable Gate Array (FPGA) featuring 301,000 logic elements, 14,251,008 bits of embedded memory, and 560 embedded 18x18 multipliers, fabricated on TSMC's 28nm low-power process and supplied in a 1152-ball FineLine BGA package at the 35C7 speed grade. The device integrates up to 9.45 Mbits of M20K memory blocks, hardware fractional PLLs, and a 3.125 Gbps transceiver subsystem with up to 9 full-duplex GTX channels, targeting cost-sensitive mid-range applications requiring serial connectivity. A Field Programmable Gate Array (FPGA) is a reconfigurable semiconductor device in which the logic fabric, interconnect, and I/O routing are programmed after manufacturing, enabling hardware-level parallelism far beyond microcontrollers. Within the broader taxonomy, the 5CGXBC9E6F35C7N belongs to the Cyclone V family (low-power, mid-density FPGA), which sits within Intel's (formerly Altera's) programmable logic device (PLD) portfolio that includes Stratix (high-end) and MAX series (CPLD). FPGAs function as the silicon platform for digital signal processing, custom I/O bridging, and hardware acceleration in communications, industrial, and vision systems. Key features include a core voltage of 1.1V, 6 transceiver channels operating up to 3.125 Gbps per the GX family profile, 4 PLL blocks, 9.45 Mbits of total embedded RAM, and PCIe Gen2 hard IP support. The 1152-pin FBGA package supports 364 user I/O pins distributed across 11 banks, while dual-configuration flash interfaces simplify in-system programming. The Cyclone V GX architecture reduces dynamic power by up to 40% relative to the prior Cyclone IV generation while maintaining backwards-compatible IP through the Quartus Prime design toolchain. The Cyclone V GX family architecture combines an 8-input adaptive logic module (ALM) fabric, dedicated DSP blocks, M20K SRAM, and 3.125 Gbps transceivers to provide balanced logic, memory, and serial I/O bandwidth. The 28nm process node enables higher integration at lower leakage, supporting the GX variant's combination of programmable fabric and hardened serial interfaces without the power penalty of higher-node FPGAs. Configuration is supported via passive serial (PS), fast passive parallel (FPP), and JTAG modes. Typical applications include industrial machine vision and video bridging, motor control and factory automation, low-cost PCIe endpoint cards, protocol bridging (EtherCAT, PROFINET), and small-cell wireless backhaul. The combination of transceivers and PCIe hard IP makes it well-suited for embedded computing platforms that need custom I/O plus standard high-speed serial. When designing with this device, ensure the 1.1V core supply decoupling uses low-ESL ceramic capacitors placed adjacent to every VCC pin, and verify the transceiver reference clock jitter meets the 3.125 Gbps link budget. Bank I/O voltages must be configured correctly before LVDS or 1.5V/1.8V/2.5V/3.3V signalling, and unused transceiver channels must be powered down per Quartus recommendations. This page synthesizes distributor pricing, drop-in Cyclone V GX alternatives, and Quartus Prime design guidance not assembled on a single manufacturer page.

USD $159,90 В наличии

5CGXBC9E7F31C8N

5CGXBC9E7F31C8N - Cyclone V GX FPGA 301K LE, 6x 3.125G | Intel

The Intel (formerly Altera) 5CGXBC9E7F31C8N is a Cyclone V GX Field-Programmable Gate Array (FPGA) delivering 301,000 logic elements, 14,251,008 bits of embedded memory, and 480 DSP blocks in a 896-pin FineLine BGA (FBGA-896) package. Built on TSMC's 28nm low-power process, it integrates six 3.125 Gbps transceivers and supports a 1.1V core supply. An FPGA (Field-Programmable Gate Array) is a class of programmable logic device (PLD) that lets designers configure millions of logic gates, dedicated DSP blocks, embedded RAM blocks, and high-speed I/O after PCB assembly. In the programmable logic hierarchy, FPGAs sit above CPLDs (smaller, non-volatile) and below ASICs (fixed-function, higher NRE cost). Cyclone V GX belongs to the cost-optimized, low-power segment of Intel's FPGA portfolio and is widely used where mid-range logic density meets integrated multi-gigabit transceivers without the cost of a Stratix-class device. Key features include six integrated 3.125 Gbps CPRI/OBSAI/PCIe-ready transceivers, hard PCIe Gen2 x4 IP blocks, dual-configuration flash interfaces, and a Hard Memory Controller supporting DDR2/DDR3/LPDDR2. Peripherals include four PLLs, 16 global clock networks, and the Configuration via Protocol (CvP) feature for partial reconfiguration over PCIe. The 896-pin FBGA package uses Intel's 1.0mm-pitch land pattern. Typical applications include industrial motor control, video surveillance IP cameras, broadcast video switching, low-cost PCIe endpoint cards, wireless backhaul, and factory automation. The integrated transceivers eliminate external SERDES ICs, reducing BOM and simplifying board layout for protocols such as Gigabit Ethernet, SDI video, and CPRI for small-cell base stations. When designing with the 5CGXBC9E7F31C8N, ensure the 1.1V core rail is sequenced after the 2.5V/3.3V VCCIO supplies; violations of power-on order can cause latch-up. Use Intel's Quartus Prime design suite (free Lite or subscription Standard) for synthesis, place-and-route, and bitstream generation. This page synthesizes real-time distributor pricing, qualified drop-in alternatives, and applied engineering design notes that supplement the manufacturer datasheet with field-tested context for sourcing and board bring-up.

USD $297,50 В наличии

5CGXBC9E7F35C8N

5CGXBC9E7F35C8N - Cyclone V GX FPGA, 301K LE, 1152-BGA | Intel

The Intel (formerly Altera) 5CGXBC9E7F35C8N is a high-density Cyclone V GX Field-Programmable Gate Array (FPGA) IC delivering 301,000 logic elements, 14,251,008 bits of embedded memory, and 560 maximum user I/O pins in a 1152-ball FineLine BGA package. As part of the Cyclone V GX family, it integrates up to 9 transceivers with 3.125 Gbps data rate, hardware DSP blocks, and a hard memory controller, optimized for cost-sensitive high-volume applications. An FPGA (Field-Programmable Gate Array) is a type of programmable logic device that can be reconfigured after manufacturing to implement custom digital circuits. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) -> programmable logic -> digital integrated circuits -> semiconductors, offering parallel processing and flexible I/O that microcontrollers and ASICs cannot match at low-to-mid volumes. Key features of the 5CGXBC9E7F35C8N include 9 full-duplex transceivers supporting CPRI, PCIe Gen1, and Gigabit Ethernet protocols, variable-precision DSP blocks for high-performance fixed- and floating-point arithmetic, and hard memory controllers supporting DDR3, DDR2, and LPDDR2 interfaces. The 'C8N' speed grade indicates an 8 ns commercial 0.85V core voltage; the 'N' suffix indicates lead-free / Pb-free termination. The Cyclone V GX architecture combines an FPGA fabric with hardened PCIe Gen1/Gen2 and transceiver IP, providing lower power and lower BOM cost versus soft-IP implementations. The 1152-BGA package provides ample signal escape for high-pin-count designs while supporting industrial-grade thermal envelopes. Typical applications include industrial machine vision and video processing, motor control and industrial automation, broadcast video and Pro-AV equipment, wireless backhaul and small-cell baseband, and PCIe Gen2 endpoint cards for industrial computing. When designing with this FPGA, ensure the Quartus Prime toolchain version matches the silicon revision; pay attention to transceiver reference clock jitter and PCB-controlled-impedance routing for 3.125 Gbps SERDES channels. This page synthesizes distributor pricing, drop-in alternatives from the Cyclone V family, and practical design notes not found in the manufacturer datasheet alone.

USD $555,10 В наличии

5CGXFC5C6F27C7N

5CGXFC5C6F27C7N - Cyclone V GX FPGA 77K LE | 672-FBGA

The Intel (formerly Altera) 5CGXFC5C6F27C7N is a Cyclone V GX field-programmable gate array (FPGA) built on TSMC's 28 nm low-power process, integrating 77,000 logic elements, 336 user I/O pins, and 5,001,216 bits of embedded SRAM in a 672-ball fine-pitch BGA (FBGA) package. It targets high-volume, cost- and power-sensitive applications that need integrated transceivers, hard memory controllers, and DSP blocks. An FPGA is a reprogrammable logic device whose internal look-up tables, routing fabric, and configurable I/O cells can be reconfigured by the user to implement custom digital hardware. Cyclone V GX parts sit in the mid-range of Intel's FPGA portfolio - below Cyclone 10 and Arria families but above older Cyclone IV devices - balancing low static power with embedded 3.125 Gbps transceivers, hardware multipliers, and a Hard Memory Controller for DDR2/DDR3/LPDDR2. Hypernyms: FPGA -> programmable logic device (PLD) -> digital IC -> semiconductor. Key features include 6 input/output PLL regions, 8 fractional PLLs, 312 embedded 18x18 multipliers, 50.625 Mbits of M10K block RAM, and 156 LVDS-capable pairs. The device supports 1.1 V core operation with multi-voltage I/O banks (1.2 V to 3.3 V) and integrates 6 hard memory controllers. Three 3.125 Gbps transceiver channels on dedicated GXB lanes enable PCIe Gen2, Gbps Ethernet, or serial RapidIO without external PHYs. The Cyclone V GX architecture combines a logic fabric with hard IP blocks (PCSs, transceivers, memory controllers) to deliver deterministic performance and reduced power compared to soft implementations. Power gating on unused transceivers, 0.85 V core option, and variable-precision DSP blocks give system designers room to optimize both dynamic power and DSP throughput. Typical applications include industrial motor control, video processing pipelines, machine vision, factory automation controllers, and PCIe-based add-in cards. The part is well-suited to mid-volume designs needing integrated serial connectivity without stepping up to Arria or Stratix cost tiers. When designing with this device, allocate FBGA fanout carefully - 672 balls at 1.0 mm pitch need HDI PCB stack-up with microvias, and proper decoupling across all VCC/VCCPGM rails is essential. Verify Quartus Prime device support and pin-out assignments against the latest device handbook before layout. This page synthesizes distributor pricing, drop-in alternative guidance, and PCB-level design notes not gathered in a single place in the manufacturer datasheet.

USD $118,00 В наличии

5CGXFC7C7F23C8N

5CGXFC7C7F23C8N - Cyclone V GX FPGA 149.5K LE | Altera

The Altera (Intel) 5CGXFC7C7F23C8N is a Cyclone V GX FPGA with 149,500 logic elements (LEs), 56,480 adaptive logic modules (ALMs), and 7.696 Mbit of embedded memory, housed in a 484-ball Fine-Pitch Ball Grid Array (FBGA-484) package. It operates from a 1.1V core supply and integrates multi-gigabit transceivers for serial data links. A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of configurable logic blocks, routing resources, and I/O cells that designers program to implement custom digital circuits. FPGAs sit above fixed-function ASICs and ASSPs in the programmable logic hierarchy, offering reconfigurability and shorter time-to-market, and the Cyclone V family specifically targets the lowest system cost and lowest power in Intel/Altera's FPGA portfolio. Key features of the 5CGXFC7C7F23C8N include 156 variable-precision DSP blocks for fixed- and floating-point arithmetic, 240 user I/O pins supporting multiple I/O standards, and integrated 3.125 Gbps-class transceivers for PCI Express, Serial RapidIO, and other serial protocols. The 'FC' designation indicates the inclusion of hard IP for protocol building blocks, reducing logic utilization and improving timing closure versus soft implementations. The device is fabricated on TSMC's 28nm low-power (28LP) process, which delivers a favorable logic-density-to-power ratio. The M9K and M144K embedded memory blocks total 7,880,704 RAM bits, sufficient for line buffering, packet processing, and video frame storage without external memories in many designs. Typical applications include industrial automation and motor drive control, wireless and wireline communications infrastructure, broadcast video processing, and consumer electronics bridging. The transceiver resources fit PCIe endpoint/root-port designs in industrial cards and data acquisition systems. A key design consideration is power distribution: the 1.1V VCCINT rail must be tightly regulated with adequate bulk and ceramic decoupling, and transceiver power domains (VCCHSSI, VCCL_GX) require dedicated filtering per the Cyclone V power management guidelines. Power estimation should be done in Intel PowerPlay tools before finalizing the regulator design. This page synthesizes distributor availability data, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, providing selection guidance for engineers comparing Cyclone V GX speed grades and density options.

Запрос цены В наличии

5CGXFC7D6F31I7N

5CGXFC7D6F31I7N - Cyclone V GX FPGA, 149.5K LEs, 896-FBGA | Altera

The Altera (now Intel) 5CGXFC7D6F31I7N is a Cyclone V GX Field Programmable Gate Array (FPGA) integrating 149,500 logic elements, 7,880,704 bits of embedded memory, and 480 user I/Os in a 896-ball FineLine BGA (FBGA) package. It targets cost- and power-sensitive applications in industrial, wireless, wireline, broadcast, and consumer markets, and is fabricated on TSMC's 28 nm low-power process. The device is part of the Cyclone V GX family and includes 6 high-speed transceiver channels capable of up to 3.125 Gbps, supporting PCIe Gen2 and multiple serial protocols. Background knowledge: A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs) connected by a programmable interconnect fabric. Unlike an ASIC, an FPGA's logic and routing are defined by a user-supplied bitstream after manufacture, enabling rapid prototyping and hardware revision. Cyclone V FPGAs sit in the low-power, low-cost segment of Intel's FPGA portfolio, occupying the space between small CPLDs and high-end Stratix families, and are widely used for parallel DSP, glue logic, video bridging, and protocol bridging. Key features of the 5CGXFC7D6F31I7N include 5648 LABs (Logic Array Blocks), 6 fractional PLLs for clock management, hard memory controllers, and hard PCIe Gen2 IP blocks. The integrated transceivers operate at data rates up to 3.125 Gbps and support protocols such as PCIe Gen1/Gen2, Gigabit Ethernet, CPRI, and JESD204B. The device supports DDR2/DDR3/LPDDR2 external memory interfaces and provides configurable hard IP for PCIe x1/x2/x4 Gen2 endpoints. Typical applications include industrial machine vision, motor and motion control, video processing and broadcast equipment, wireless backhaul, small-cell base stations, factory automation, and cost-optimized prototyping. The combination of moderate logic density, embedded transceivers, and low static power makes the device well-suited for fanless, sealed enclosure designs in harsh industrial environments. When designing with this FPGA, use the Quartus Prime design suite for synthesis, place-and-route, and bitstream generation. Pay close attention to transceiver reference clock jitter, decoupling strategy at the FBGA balls, and thermal management; the package requires a multi-layer PCB with proper via-in-pad or dog-bone fanout for reliable BGA assembly. This page synthesizes distributor pricing, drop-in Cyclone V GX alternatives, and practical design notes that go beyond the manufacturer datasheet.

USD $318,45 В наличии

5CGXFC9E7F35C8N

5CGXFC9E7F35C8N - Cyclone V GX FPGA, 301K LE, 560 I/O | Altera

The Altera (Intel) 5CGXFC9E7F35C8N is a Cyclone V GX FPGA with 301,000 logic elements (LEs), approximately 14.25 Mbit (14,251 Kbit) of embedded memory and 560 user I/O, housed in a 1152-ball FineLine BGA (F35) package for surface-mount assembly. An FPGA (Field Programmable Gate Array) is a semiconductor device containing a fabric of programmable logic blocks, routing resources, and embedded memory that designers configure after manufacturing. Within the semiconductor hierarchy, the FPGA sits alongside microprocessors and ASICs as a digital logic platform, offering ASIC-like parallelism with the reconfigurability of software. The Cyclone V family is Intel/Altera's mid-range, low-power FPGA generation, spanning the E (logic), GX (logic plus 3.125 Gbps transceivers), GT, SE, and SX (SoC) variants. The 5CGXFC9E7F35C8N combines the large 301K LE fabric with GX-class serial transceivers, enabling high-throughput serial protocols in a single device. The E7 speed grade provides a cost-optimized timing point for designs that do not require the fastest -6 or -5 grades. The 1152-ball F35 package delivers the high I/O count (560) and ball pitch needed for wide memory interfaces, high-speed serial links, and dense pin-multiplexed designs. Architecturally, Cyclone V GX devices use a low-power 28 nm process, a variable-precision DSP block architecture for fixed- and floating-point-friendly arithmetic, and hardened memory blocks that can be configured as single- or dual-port RAM, FIFO, or shift registers. The transceiver columns support common serial protocols for bridging, packet switching, and data path acceleration. Typical applications include communications and packet processing equipment, industrial imaging and video systems, broadcast infrastructure, medical imaging front ends, and ASIC prototyping or ASIC/foundry verification platforms where serial bandwidth and gate capacity must scale. Design consideration: the 1152-ball BGA requires a controlled-impedance multilayer PCB, careful power-distribution-network (PDN) design for the multiple core/I/O/transceiver rails, and X-ray inspection capability at assembly. Verify configuration (AS/QSPI or PS mode) circuitry per the Intel Cyclone V handbook before release. This page synthesizes distributor pricing, same-family drop-in speed-grade and temperature-grade alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $191,10 В наличии

5CSEBA2U19A7N

5CSEBA2U19A7N - Cyclone V SE SoC FPGA 25K LE, A7 Automotive | Altera

The Altera 5CSEBA2U19A7N is a Cyclone V SE System-on-Chip (SoC) FPGA combining a dual-core ARM Cortex-A9 MPCore hard processor system with a 25K-logic-element FPGA fabric in a 484-pin UBGApackage (19x19 mm), qualified to the AEC-Q100 automotive standard. Built on TSMC's 28nm low-power process, this device integrates a CoreSight debug and trace subsystem alongside variable-precision DSP blocks, embedded memory, and high-speed serial interfaces for industrial and automotive embedded workloads. The Cyclone V SE SoC family occupies the mid-range position in the broader Cyclone V SoC taxonomy, sitting between the smaller Cyclone V SX (lower power, lower LE) and higher-capacity Cyclone V ST/GT variants. An SoC FPGA is a heterogeneous computing device that pairs a deterministic, parallel programmable-logic fabric with a sequential, software-driven application processor subsystem on a single die, enabling designers to partition tasks between hardware acceleration in the FPGA and software execution on the ARM cores. Key specifications include 25K logic elements, automotive A7 temperature grade support, integrated dual ARM Cortex-A9 cores with NEON media engine and single/double-precision floating-point unit, variable-precision DSP blocks for fixed- and floating-point signal processing, and on-chip memory with embedded ECC for high-reliability applications. The 28nm low-power process targets industrial, automotive, and vision applications where thermal envelope and power budget are constrained. This SoC FPGA is engineered for the intersection of programmable logic and embedded Linux/Android workloads. The dual 32-bit ARM cores operate up to 700 MHz with tightly-coupled memory and shared L2 cache, while the FPGA fabric delivers deterministic, low-latency I/O handling for high-speed sensors and parallel data acquisition. The hard memory controller, external memory interfaces, and peripheral bridges are integrated to minimize external component count. Typical applications include automotive Advanced Driver Assistance Systems (ADAS) sensor fusion, industrial machine vision and robotics controllers, factory automation gateways, and embedded vision for medical imaging or surveillance. The AEC-Q100 automotive qualification and extended temperature support also suit chassis electronics, body controllers, and HMI systems. When designing with this device, plan power sequencing for the FPGA core, HPS I/O, and PLL rails independently, and follow Altera's Cyclone V SE hardware reference manual for DDR3/LPDDR2 bring-up. The 19x19 mm UBGApackage requires a multilayer PCB with via-in-pad and controlled-impedance traces for high-speed transceivers. This page synthesizes distributor pricing, AEC-Q100 cross-references, and practical HPS/FPGA integration guidance not collected in any single source on the web today.

USD $92,10 В наличии

5CSEBA2U19C6N

5CSEBA2U19C6N - Cyclone V SE SoC FPGA, 25K LE, ARM Cortex-A9 | Intel

The Intel 5CSEBA2U19C6N is a Cyclone V SE System-on-Chip (SoC) FPGA that integrates a dual-core ARM Cortex-A9 MPCore hard processor system (HPS) with CoreSight debug, together with a 25K-logic-element Cyclone V FPGA fabric, housed in a 484-pin UBGA (19x19 mm) package. It combines a programmable logic fabric running alongside a feature-rich application processor subsystem, achieving up to 925 MHz HPS clock and variable-precision DSP blocks for signal processing acceleration. A System-on-Chip FPGA is a heterogeneous compute device that tightly couples a general-purpose processor subsystem with programmable logic on a single die. It belongs to the broader class of FPGAs (Field Programmable Gate Arrays) within the programmable logic device family, which sit alongside microcontrollers, ASICs, and ASSPs in the embedded compute hierarchy. In a Cyclone V SE SoC, the ARM Cortex-A9 cores handle operating-system execution, network stacks and user applications, while the FPGA fabric accelerates parallel DSP, custom peripherals, and high-speed interfaces. Key features include up to 25K logic elements, embedded M10K memory blocks, variable-precision DSP blocks, integrated transceivers, and a hard memory controller supporting DDR2/DDR3/LPDDR2. The HPS block delivers dual ARM Cortex-A9 MPCore cores with NEON media engine, single/double-precision FPU, 32 KB I-cache / 32 KB D-cache per core, 512 KB shared L2 cache, and a rich peripheral set including GbE, USB 2.0 OTG, SATA, CAN, UART, SPI, I2C and SD/SDIO/MMC controllers. Built on TSMC's low-power 28 nm process, the 5CSEBA2U19C6N balances performance and power efficiency for cost-sensitive applications. The FPGA-to-HPS bridges (AXI-32/64, FPGA-to-SDRAM ports) enable high-throughput, low-latency data movement, while integrated ECC support on external memory interfaces improves reliability in industrial and automotive environments. Typical applications include industrial machine vision, motor control and drive, factory automation, broadcast video processing, automotive driver-assistance (ADAS), medical imaging, military/aerospace signal processing, and software-defined radio (SDR) platforms. The combination of an ARM Cortex-A9 host running Linux with deterministic FPGA acceleration is well suited to systems that need both rich HMI/networking and real-time DSP. When designing with this device, allocate pin assignments carefully between the HPS I/O bank and the FPGA I/O banks because they share the same package but use separate supply rails. Use the Altera/Intel SoC EDS tool suite (Quartus II / Quartus Prime + DS-5 / Arm Development Studio) for HPS firmware, boot-loader (U-Boot / preloader) and FPGA configuration flows. Ensure the multi-boot and remote system update features are enabled for production designs requiring field upgrades. This page synthesizes distributor pricing, pin-compatible same-family and cross-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single-source reference for evaluation, sourcing, and second-source risk mitigation.

USD $74,60 В наличии

5CSEBA2U19C7N

5CSEBA2U19C7N - Cyclone V SE SoC FPGA, 25K LE, Dual ARM Cortex-A9 | Intel

The Intel 5CSEBA2U19C7N is a Cyclone V SE System-on-Chip (SoC) FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system with CoreSight debug fabric alongside 25,000 logic elements of Cyclone V FPGA fabric, housed in a 484-pin Ultra BGA package (UBGA-484, 19x19 mm). The device combines a feature-rich HPS with low-power FPGA fabric on TSMC's 28 nm low-power process, targeting embedded vision, motor control, and industrial Ethernet designs where deterministic latency and tight CPU/FPGA coupling matter. A Cyclone V SoC FPGA is a heterogeneous compute platform that merges an applications-grade ARM processor subsystem with programmable logic on a single die. The HPS block includes Cortex-A9 cores, L1/L2 caches, ARM MPCore coherency fabric, and a rich set of peripherals (EMAC, USB, NAND, SD/MMC, DDR controllers). The FPGA fabric provides parallel DSP, on-chip memory (MLABs + M9K blocks), and user I/O supporting LVDS, LVTTL, LVCMOS, and SSTL interfaces. Compared with discrete CPU-plus-FPGA solutions, the SoC integration removes a board-level bridge, reduces BOM and pin count, and enables sub-microsecond HPS-to-Fabric register handshakes through the AXI bus matrix. Key features of 5CSEBA2U19C7N include approximately 25,000 logic elements, 9,430 adaptive logic modules (ALMs), 9,430 ALUTs, 396 DSP blocks (18x18 multipliers), and 1,400 Kbits of embedded memory. The HPS runs up to 925 MHz with dual 32 KB instruction and 32 KB data L1 caches plus 512 KB shared L2, and the FPGA fabric supports configuration via passive serial, fast passive parallel, and Active Serial (AS) modes. Industrial temperature grade (C7 speed grade), 1.1 V core, and 484-ball UBGA package with 1.0 mm ball pitch complete the headline specs. Architecture-wise, the device uses TSMC's 28 nm low-power process with hard ARM cores and a variable-precision DSP block (17x17 or 18x18 multiply mode plus accumulator chains). The HPS-Fabric AXI bridges (FPGA-to-HPS, HPS-to-FPGA, and lightweight HPS-to-FPGA) enable configurable master/slave transactions, and the CoreSight debug infrastructure supports JTAG and trace through a single DAP. Multi-port SDRAM controller in the HPS supports LPDDR2, DDR2, and DDR3 with ECC. Typical applications include industrial machine vision cameras, motor control and industrial drives, factory automation PLCs, broadcast video processing, and military/aerospace embedded systems. The Cyclone V SE variant specifically targets applications that do not require the higher-bandwidth transceivers of the Cyclone V GX/ST families but still need ARM-class processing tightly coupled to FPGA logic. When designing with this part, pay close attention to the HPS pin multiplexing configuration (HPS pin mux must be set in preloader), DDR3 interface termination, and thermal management at sustained HPS loads. The UBGA-484 package demands 1.0 mm pitch PCB design rules; plan via-in-pad or dog-bone fanout early in the layout phase. This page synthesizes distributor pricing across DigiKey, Mouser, and LCSC, drop-in same-package alternatives from the Cyclone V SE family, and practical design notes not found in the manufacturer datasheet alone.

USD $16,90 В наличии

5CSEBA2U19C7SN

5CSEBA2U19C7SN - Cyclone V SE SoC, 25K LE, ARM Cortex-A9 | Altera

The Altera (Intel) 5CSEBA2U19C7SN is a Cyclone V SE System-on-Chip that integrates a 25K-logic-element FPGA fabric with a single ARM Cortex-A9 MPCore hard processor subsystem plus CoreSight debug, packaged in a 484-UBGA (19x19 mm). The SoC combines programmable logic with a hard 800 MHz application processor, offering a balanced platform for embedded systems that need deterministic FPGA acceleration alongside a Linux-capable CPU. A System-on-Chip (SoC) FPGA is a single silicon device that merges a general-purpose processor subsystem with an FPGA fabric, sharing the same die. The hard CPU subsystem (HPS) handles sequential control tasks, operating systems, and network stacks, while the FPGA fabric implements custom accelerators, high-speed interfaces, and glue logic. Within the broader IC taxonomy, the 5CSEBA2U19C7SN belongs to the Cyclone V SE family, which sits between the smaller Cyclone V E (logic-only) and the larger Cyclone V GX/GT/GX-S (transceiver-enabled) variants, offering transceiver-less mid-range SoC integration at low power. Key features include 25K logic elements, 66 (5CSEBA5) or 161 (5CSEBA2) user I/Os (this 5CSEBA2 variant exposes 161 I/Os), embedded M10K and MLAB memory blocks, variable-precision DSP blocks, single ARM Cortex-A9 MPCore with NEON and single-precision FPU, CoreSight debug and trace, and a hardened memory controller suite (LPDDR2, DDR2, DDR3, LPDDR). The device supports industrial temperature grade (the 'I' suffix option) and is built on TSMC's low-power 28 nm process. Architecturally, the HPS uses a coherent 32-bit ARM Cortex-A9 with tightly coupled memories, ACP port for FPGA-to-CPU cache coherency, and dedicated peripherals including EMAC, USB, NAND/NOR flash controllers, SPI, I2C, and UART. The FPGA fabric communicates to the HPS over three bridge types (AXI-32, AXI-64, AXI-128) through the system interconnect. This heterogeneous architecture enables hardware/software partitioning where latency-critical tasks move to fabric and control-plane tasks remain on Linux. Typical applications include industrial motor control, machine vision pre-processing, software-defined radio front-ends, factory automation HMIs, military/aerospace video processing, and portable medical instrumentation. The single-core variant suits cost-sensitive designs; dual-core is available in the 5CSEBA2 with the same footprint when symmetric multiprocessing is required. Design consideration: route the HPS-to-FPGA bridges across the dedicated AXI interfaces rather than over GPIO, and assign DDR pins according to the Altera pin-out file - the 484-UBGA has dedicated HPS byte lanes that cannot be reassigned. The device is supplied only in the commercial 'C7' speed grade here; industrial 'I7' and faster 'C8' speed grades are also offered in the same U19 package for extended temperature or higher Fmax. This page synthesizes distributor pricing, in-package alternatives, application fit, and practical SoC design notes that the manufacturer datasheet alone does not present in consolidated form.

USD $40,33 В наличии

5CSEBA2U19C8N

5CSEBA2U19C8N - Cyclone V SE SoC FPGA 25K LE Dual ARM Cortex-A9

The Altera 5CSEBA2U19C8N is a Cyclone V SE System-on-Chip (SoC) FPGA that integrates a dual-core ARM Cortex-A9 MPCore processor subsystem with CoreSight debug technology alongside a 25K logic-element FPGA fabric, housed in a 484-pin UBGА (19x19) package with a 1.1V core supply. The HPS (Hard Processor System) runs at up to 600 MHz while the FPGA fabric delivers variable-precision DSP blocks, embedded memory, and high-speed transceivers typical of the Cyclone V SE family. A System-on-Chip (SoC) FPGA is a class of heterogeneous computing device that combines a microprocessor subsystem with programmable logic on a single die. This architecture enables deterministic hardware acceleration of latency-critical functions such as motor control, signal processing, and protocol termination running alongside a general-purpose OS on the ARM cores, eliminating the need for a separate processor-plus-FPGA two-chip solution and reducing board area, BOM cost, and inter-chip latency. Cyclone V SE sits within Intel's (formerly Altera's) low-power 28nm SoC FPGA lineup, optimized for cost-sensitive industrial, automotive, and video applications. Key features of the 5CSEBA2U19C8N include the dual-core ARM Cortex-A9 MPCore with NEON media engine, single/double-precision floating-point unit, L1/L2 cache hierarchy, and CoreSight debug. The FPGA fabric provides 25K logic elements, embedded M10K memory blocks, variable-precision DSP blocks, and integrated memory controllers supporting DDR2/DDR3/LPDDR2. The device includes high-speed transceivers, multiple PLLs, and a rich peripheral set (USB, EMAC, UART, SPI, I2C) exposed through the HPS-to-FPGA bridges. The 28nm low-power process allows static power consumption below 250 mW typical, making the Cyclone V SE SoC suitable for fanless industrial enclosures and thermally constrained embedded systems. Compared to discrete processor-plus-FPGA designs, the shared on-die interconnect between HPS and FPGA fabric delivers sub-microsecond latency, simplifying deterministic real-time control loops. According to the Altera Cyclone V device handbook, the HPS-to-FPGA bridges support up to 128-bit data paths at the full HPS clock. Typical applications include industrial motor control and PLC platforms, machine vision and video surveillance, factory automation HMIs, automotive driver-assistance subsystems, and embedded vision for smart retail or medical imaging. The Cyclone V SE family's broad OS support (Linux, VxWorks, FreeRTOS via Altera/Intel SoC EDS) accelerates time-to-market for embedded developers. When designing with this device, allocate sufficient PCB real estate for the 484-pin BGA, ensure the HPS and FPGA banks have separate decoupling networks, and use the Altera SoC EDS toolkit with the ARM DS-5 debug environment. DDR3 trace lengths must be length-matched within the limits stated in the Cyclone V SE device handbook. Decoupling bulk and high-frequency ceramic capacitors should be placed as close as possible to each power pin. This page synthesizes distributor pricing, drop-in alternatives from the Cyclone V SE family, and practical SoC FPGA design notes that go beyond the manufacturer datasheet alone.

USD $52,40 В наличии

Подкатегории

Товары (32725)