5CGXBC7C7U19C8N - Cyclone V GX FPGA, 149.5K LE | Intel
Артикул: 5CGXBC7C7U19C8N ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $105.79 | $105,79 |
| 10 | $98.5 | $985,00 |
| 25 | $92.1 | $2.302,50 |
| 100 | $84.3 | $8.430,00 |
| 500 | $76.8 | $38.400,00 |
5CGXBC7C7U19C8N Обзор
An FPGA (Field-Programmable Gate Array) is a semiconductor device built around a matrix of configurable logic blocks (CLBs), programmable interconnects, and dedicated hard IP blocks such as transceivers, DSP blocks, and embedded memory. FPGAs sit in the hierarchy of programmable logic devices (PLDs) -> programmable logic -> logic IC -> integrated circuit. Unlike an ASIC, an FPGA's function is defined after manufacture by loading a user bitstream into on-chip SRAM configuration memory, allowing rapid prototyping and field upgrades. Cyclone V is positioned at the low-power, low-cost end of Intel's FPGA portfolio.
Key differentiating features include six general-purpose PLLs, two hard memory controllers, two PCIe hard IP blocks (Gen1/Gen2 capable), and 156 embedded 18x18 multipliers supporting DSP workloads up to 156 GMACs. The device supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards with hot-socketing capability. The 28 nm TSMC low-power process delivers a typical power envelope of less than 1.5 W at full utilization in static conditions.
The architecture combines logic fabric, M10K SRAM blocks (446 blocks total), MLABs, and a hardened peripheral set. Transceivers support CPRI, PCIe Gen1/2, Gigabit Ethernet, and SGMII protocols through soft PCS layers, removing external PHY components in many wireless backhaul and industrial connectivity designs.
Typical applications include industrial motor control, video surveillance and broadcast bridging, PCIe endpoint cards, low-density wireline backhaul, and factory automation. The combination of transceivers, DSP, and PCIe makes it suitable for cost-sensitive designs that previously required mid-range Cyclone IV + external PHY solutions.
When designing with this device, allocate sufficient decoupling across the 484-ball UBGA - VCCINT and VCCA require low-impedance bulk decoupling within 100 mils of the balls. Thermal management typically relies on a heat-spreader for industrial temperature operation, and the bitstream compression feature reduces configuration flash size by up to 60 percent.
This page synthesizes distributor pricing, same-package drop-in alternatives from the Cyclone V family, and practical PCB/thermal design notes not consolidated in any single manufacturer document.
Аналоги без доработки для 5CGXBC7C7U19C8N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 5CGXBC7C7U19C8N (тот же форм-фактор и посадочное место) — отличается по Package, Transceivers, Speed Grade, Operating Temperature, Family.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
5CGXBC7C7U19I7N
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
5CGXBC7C6U19C7N
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →5CGXBC7C7U19C8N
✅ Прямая замена✓ В наличии
$76.8 / шт.
Открыть даташит →5CGXBC5C7U19C8N
✅ Прямая замена✓ В наличии
$112 / шт.
Открыть даташит →5CGXBC7C7U19C8N Максимальные параметры и электрические характеристики
| Family | Cyclone V GX |
| Logic Elements (LE) | 149,500 |
| Embedded Memory (Bits) | 7,880,704 |
| Number of I/Os | 240 |
| Корпус | 484-FBGA (UBGA, U19) |
| Supply Voltage (Core) | 1.1 V (typ) |
| Transceivers | 9 channels |
| Transceiver Data Rate | Up to 3.125 Gbps |
| PCIe Hard IP | 2 blocks (Gen1/Gen2) |
| PLLs | 6 (general-purpose) |
| Embedded Multipliers | 156 (18x18) |
| M10K Memory Blocks | 446 |
| Рабочая температура | 0C to +85C (Commercial) |
| Тип монтажа | Surface Mount (BGA) |
| Уровень MSL | 3 (168 hours) |
| Статус RoHS | Compliant |
| Configuration Scheme | SRAM-based, supports bitstream compression |
Руководство по цоколевке 5CGXBC7C7U19C8N в корпусе 484-fbga (ubga, u19)
Цоколевка для 5CGXBC7C7U19C8N (корпус 484-fbga (ubga, u19)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для 5CGXBC7C7U19C8N.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
5CGXBC7C7U19C8N подходит для 6 применениеs: Industrial Motor Control, Video Surveillance and Broadcast Bridging, PCIe Endpoint Cards, Wireless Backhaul and Small-Cell Baseband, Factory Automation and Industrial Networking, Test and Measurement Instrumentation.
Industrial Motor Control
The 5CGXBC7C7U19C8N is well suited for multi-axis industrial motor control drives because it combines 156 embedded 18x18 multipliers and 9 transceivers up to 3.125 Gbps in the U19 484-pin BGA package. The 149,500 LEs can absorb the field-oriented control (FOC) loops, PWM generation, encoder feedback, and EtherCAT/MII slave interface without external coprocessors. The C8 speed grade supports 100 MHz control loops with deterministic latency, and the device's low static power (typically below 1.5 W) simplifies thermal design in DIN-rail mounted drives.
Рекомендуется
Video Surveillance and Broadcast Bridging
For video surveillance encoders, the 5CGXBC7C7U19C8N provides the fabric needed to bridge MIPI-CSI, LVDS camera inputs, and PCIe Gen2 to a host SoC, while its 7.88 Mbit of embedded memory buffers frame-rate conversions. The 9 transceivers handle multiple Gigabit Ethernet streams for IP camera aggregation or SDI-over-IP bridging. The U19 package's 240 user I/Os are sufficient to land 4x MIPI CSI-2 lanes plus control plane GPIO, replacing a discrete PHY plus microcontroller solution.
Рекомендуется
PCIe Endpoint Cards
The 5CGXBC7C7U19C8N integrates two hardened PCIe Gen1/Gen2 IP blocks, allowing direct root-complex or endpoint connectivity without an external bridge. The 9 transceivers and 6 PLLs support PCIe x1 or x2 plus auxiliary SGMII or SATA links on the same chip. The 149,500 LEs accommodate custom DMA engines and protocol logic in NIC, instrumentation, or low-cost accelerator cards.
Рекомендуется
Wireless Backhaul and Small-Cell Baseband
The 5CGXBC7C7U19C8N's 3.125 Gbps transceivers support CPRI up to 3.072 Gbps, making the part a viable baseband processing device for small-cell and low-density macro base stations. The 156 DSP-friendly 18x18 multipliers handle uplink/downlink channelization and pre-coding for LTE small cells, while the embedded memory buffers HARQ processes. The U19 package's ball pitch simplifies 8-layer PCB stack-up for cost-sensitive small-cell form factors.
Рекомендуется
Factory Automation and Industrial Networking
The 5CGXBC7C7U19C8N delivers the I/O count, transceiver count, and logic density needed to consolidate EtherCAT master, Profinet IRT, and EtherNet/IP adapter stacks on a single device. The 240 user I/Os in the U19 BGA handle multiple isolated RS-485 ports, digital I/O modules, and encoder interfaces. Hardened PCIe blocks enable modular PLC backplane designs, while bitstream compression accelerates firmware update cycles in the field.
Рекомендуется
Test and Measurement Instrumentation
The 5CGXBC7C7U19C8N provides the logic and DSP density required for mid-range oscilloscope, signal analyzer, and protocol tester front ends. The 156 18x18 multipliers implement FIR decimation filters, FFT engines, and modulation analyzers; the 7.88 Mbit embedded memory stores sample buffers. The 9 transceivers drive LVDS or SGMII ADC/DAC interfaces such as AD9680BCPZ-500 or ADAR1000ACCZN, while the hardened PCIe Gen2 block streams captured waveforms to the host at sustained rates above 1.5 GB/s.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 5CGXBC7C7U19C8N — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | 5CGXBC7C7U19I7N | 5CGXBC7C6U19C7N | 5CGXBC5C7U19C8N | 5CGXBC7B7M15C8N |
|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 484-FBGA (U19) | 484-FBGA (U19) - same footprint | 484-FBGA (U19) - same footprint | 484-FBGA (U19) - same footprint | 484-BGA (M15) - different ball map |
| Logic Elements | 149,500 | 149,500 | 149,500 | 77,760 (approx) | 149,500 |
| Embedded Memory (bits) | 7,880,704 | 7,880,704 | 7,880,704 | 4,462,848 | 7,880,704 |
| Transceivers | 9 channels / 3.125 Gbps | 9 channels / 3.125 Gbps | 9 channels / 3.125 Gbps | 9 channels / 3.125 Gbps | 9 channels / 3.125 Gbps |
| Operating Temperature | 0C to +85C (Commercial) | -40C to +100C (Industrial) | 0C to +85C | 0C to +85C | 0C to +85C |
| Speed Grade | C8 | I7 | C6 (slower) | C8 | C8 |
| PCIe Hard IP | 2 blocks (Gen1/Gen2) | 2 blocks | 2 blocks | 2 blocks | 2 blocks |
| Unit Price (qty 1) | $105.79 | $118-$140 (industrial) | $98-$110 | $78-$95 | $115-$130 |
Ключевые отличия
- Highest logic density in the 484-ball U19 footprint (против 5CGXBC5C7U19C8N)
- Commercial vs industrial temperature grade (против 5CGXBC7C7U19I7N)
- Speed-grade flexibility in identical footprint (против 5CGXBC7C6U19C7N)
Заметки по проектированию
Estimated: at 1.1 V core supply and full utilization, VCCINT current may reach 1.5 A; place 22 uF + 100 nF bulk decoupling within 100 mils of each VCCINT ball group, with VCCPD (2.5/3.3 V) and VCCA (2.5 V) decoupled separately. Use a 6-layer PCB with one dedicated ground plane to minimize power-supply-induced jitter on the 3.125 Gbps transceivers. Cyclone V GX has separate PLL analog supplies (VCCA_PLL) that must be filtered with ferrite beads.
The 484-ball UBGA package has a theta_JA of approximately 12 C/W with a 1 oz copper inner ground plane and no airflow; at full fabric utilization the die may dissipate 1.5 to 2.0 W. For continuous commercial-temperature operation (0C to +85C), provide at least 10 CFM of forced airflow or a small clip-on heatsink. The industrial-grade I7N variant relaxes this requirement because the maximum ambient extends only to 100C, but thermal design must still respect the 100C junction limit.
Use the standard Intel Cyclone V GX U19 land pattern (19 mm body, 1.0 mm ball pitch) with 0.5 mm-diameter NSMD pads and microvia-in-pad for the inner rows to break out the 484 balls on a 6-layer stack-up. Match all transceiver differential pairs to 100 ohm +/- 10 percent impedance and keep intra-pair skew below 1 ps for 3.125 Gbps operation. Reference the Cyclone V GX device handbook pin-out files for exact ball assignments and bank VREF pinouts.
Do not confuse the U19 (484-ball) and M15 (484-ball) Cyclone V GX packages - they share ball count but differ in ball map, body size, and I/O count. The M15 variant uses a smaller body and exposes fewer transceivers. Mixing U19 and M15 land patterns will cause a PCB rework. Also note that LVDS channels require an external 100-ohm near-end termination; the device provides on-chip termination only for some I/O standards.
Информация о соответствии
RoHS and REACH compliance per Intel/Altera product page for Cyclone V GX family. Not AEC-Q100 qualified - FPGAs in this family target industrial and commercial markets, not automotive. Lead-free BGA balls confirmed per Intel datasheet.
