Товары (44.000+)

ICS581G-01 - 200MHz PLL Zero-Delay Clock Multiplexer | Renesas
ICS581G-01

ICS581G-01 - 200MHz PLL Zero-Delay Clock Multiplexer | Renesas

The Renesas Electronics ICS581G-01 is a glitch-free, phase-locked-loop clock multiplexer with a maximum operating frequency of 200 MHz, two clock inputs, four true outputs, and zero input-to-output delay in a 16-pin TSSOP package. The device gives designers a zero-delay clock fanout function with user-controlled selection between the two input clocks. A PLL-based clock multiplexer is a clock-and-timing integrated circuit that combines phase-locked-loop technology with clock selection or distribution. It belongs to the hierarchy of clock-and-timing ICs, where it serves as a specialized input-to-output clock distribution device. Unlike a conventional multiplexer that introduces propagation delay through logic gates, the ICS581G-01 uses a PLL to align its output phase with the selected reference clock. The principal features include operation up to 200 MHz, four non-inverted clock outputs, and the ability to configure those outputs as one, three, or four active outputs. User-controlled mux switching distinguishes the ICS581G-01 from the automatically switching ICS581-02. According to the manufacturer datasheet, the architecture is designed to suppress output glitches while providing zero delay from input to output. The PLL-based implementation supports predictable clock phase relationships across multiple loads when board layout, power distribution, and output configuration are handled correctly. Each of the four outputs can be enabled as part of a one-output, three-output, or four-output arrangement. This flexibility allows the same device to serve as a one-to-four clock fanout element, a two-input clock selector, or a redundant-clock transition component. Typical uses include processor and FPGA clock distribution, memory-clock fanout, network-interface clocking, telecommunications equipment, industrial control systems, and test-and-measurement platforms. The 200 MHz upper operating frequency makes the device suitable for systems whose clock architecture benefits from phase-aligned outputs rather than conventional buffered propagation delay. PCB implementation should use short, impedance-controlled clock traces, solid ground-plane continuity, and decoupling close to the supply pins. The TSSOP-16 package requires careful fanout because four outputs must reach separate destinations without introducing avoidable skew. Input and output timing should be evaluated together with loading, trace length, and the switching method used by the downstream logic. This page consolidates the device function, verified electrical and package characteristics, practical clock-tree design notes, and qualified drop-in alternatives. It also distinguishes the user-controlled ICS581G-01 from related suffix variants so engineers can assess timing, temperature, packaging, and lifecycle requirements before approving a substitution.

Запрос цены Контакты
ICS581G-02 - 200MHz Zero-Delay Clock Buffer | Renesas
ICS581G-02

ICS581G-02 - 200MHz Zero-Delay Clock Buffer | Renesas

The Renesas Electronics ICS581G-02 is a zero-delay, glitch-free clock multiplexer and fanout buffer rated for 200 MHz operation in a 16-pin TSSOP package measuring 4.40 mm in width. The device provides four true outputs, supports PLL-based clock distribution, and is designed for systems that require multiple synchronized clock outputs with minimal insertion delay. A clock multiplexer is an integrated timing device that routes one of several input clocks to a shared output while maintaining controlled phase relationship between the selected sources. Clock buffers reproduce a timing signal across multiple loads to improve fanout and isolate source and destination circuits. The ICS581G-02 combines these functions in a single clock and timing IC, placing it within the PLL-based clock distribution hierarchy used in communications, computing, industrial control, and test equipment. Key characteristics include a maximum stated operating frequency of 200 MHz, four non-inverted outputs, zero-delay clock distribution, glitch-free multiplexing, and a 16-pin TSSOP package with 0.65 mm pitch. The four-output arrangement allows a single device to feed several clock domains while reducing the number of separate buffers required on the printed circuit board. Its TSSOP package supports compact surface-mount construction and automated assembly. Technically, the ICS581G-02 uses a PLL-based architecture to generate the distributed clock outputs. PLL-based distribution can compensate for clock-path phase differences and provide predictable output relationships when the device is switched between operating modes. Because the manufacturer identifies the part as a zero-delay glitch-free clock multiplexer, designers can use it where source selection and output fanout must occur without introducing an intentional cycle delay at the output. Typical uses include processor and FPGA clock distribution, communications-module clock routing, data-converter clock fanout, industrial control systems, and instrumentation requiring several outputs from one timing source. The device is also appropriate where a design needs to select between clock sources without relying on discrete multiplexer and buffer combinations. Placement near the loads can reduce trace-related skew and improve clock distribution across a board. Layout is especially important because a clock device can perform correctly in principle but fail in the assembled PCB if input traces, output loads, and return paths are poorly matched. Keep the clock inputs and outputs over a continuous reference plane, minimize stub branches, place decoupling close to the supply pins, and maintain a symmetric output-routing arrangement. Review the pin-description and layout guidance in the manufacturer datasheet before finalizing fanout and return-path geometry. This product page combines the verified device characteristics, supported ordering variants, application guidance, and comparison criteria to help engineers evaluate the ICS581G-02 for zero-delay clock multiplexing and fanout designs. It also highlights which electrical and pin-level details must be confirmed from the manufacturer datasheet before production release.

Запрос цены Контакты
ICS601G-01 - 156MHz Low-Phase-Noise Clock Multiplier | Renesas
ICS601G-01

ICS601G-01 - 156MHz Low-Phase-Noise Clock Multiplier | Renesas

The Renesas Electronics ICS601G-01 is a low-phase-noise clock multiplier and clock synthesizer operating up to 156 MHz in a 16-pin TSSOP package with a 4.40 mm body width. It is designed for applications that require low phase noise, low jitter, and low clock skew, and it supports multiplication ratios from 1-to-5 according to the manufacturer documentation. The device is identified by DigiKey as a clock/frequency synthesizer IC with one output and a 16-TSSOP package. A clock multiplier is a timing IC that generates an output clock from an input reference and can multiply that reference by a programmed integer ratio. Clock multipliers belong to the clock and timing IC hierarchy alongside phase-locked loops, dividers, buffers, and jitter attenuators. Their purpose is to produce a stable, higher-frequency timing signal while maintaining predictable phase relationships among the source, output, and any clock distribution network. The ICS601G-01 emphasizes phase-noise performance and is described as a low-cost, high-performance clock synthesizer. The same device family is advertised as the lowest-phase-noise multiplier in its original product series and as a low-CMOS-power clock-multiplier option. These characteristics make it relevant to communications, data-conversion, networking, and test-and-measurement systems where clocking noise can propagate into modulation error, conversion accuracy, or timing margins. A 16-TSSOP surface-mount package supports compact PCB layouts and automated assembly. The verified product data identifies a body width of 0.173 inches, equivalent to 4.40 mm. Compared with larger leaded packages, TSSOP reduces board area and shortens interconnect length, although careful layout remains necessary because an oscillator or multiplier can translate supply and reference noise directly into output phase noise. Typical uses include generating a multiplied clock for high-speed serial links, synchronizing parallel data converters, driving low-skew clock trees, and producing a master clock for communications equipment. The device can also serve in clock-generation modules and laboratory instruments where a stable reference frequency must be converted into a higher-rate working clock. When laying out this circuit, keep the reference and output paths short, place decoupling capacitors close to the supply pins, and route sensitive clock traces away from switching nodes. Confirm the supported input range, output ratio programming method, supply voltage, and load drive capability against the current manufacturer datasheet before releasing the layout. This page combines manufacturer-family characteristics with distributor package data, drop-in sourcing variants, practical clock-tree design guidance, and a parameter-by-parameter comparison. Those engineering details help buyers evaluate the ICS601G-01 beyond the basic catalog description and identify the correct package suffix for an existing design.

Запрос цены Контакты
ICS601G-21 - 220MHz Low Phase Noise Clock Multiplier | Renesas
ICS601G-21

ICS601G-21 - 220MHz Low Phase Noise Clock Multiplier | Renesas

The Renesas Electronics ICS601G-21 is a low-phase-noise clock multiplier and clock generator IC designed for applications requiring low jitter, low phase noise, and low-skew fanout. The verified product listing identifies a maximum operating frequency of 220 MHz and a 16-pin TSSOP package with a 4.40 mm body width. The device operates from a 3.0 V to 3.6 V CMOS supply, making it suitable for modern digital systems, processor clocking, communications equipment, and industrial control designs. A clock multiplier is a clock-and-timing IC that generates one or more related output clocks from an input reference. It sits within the broader clock generation and frequency synthesis hierarchy, where clock generator ICs, phase-locked loops, and multipliers provide stable timing references for digital logic, serial links, converters, and communication transceivers. The ICS601G-21 is positioned as a low-cost, low-phase-noise, high-performance multiplier for designs where timing quality is important. The primary performance benefit is clock multiplication with low phase noise. Lower phase noise can reduce timing uncertainty in high-speed digital paths, while low jitter is valuable for clocking oscillators, converters, communication interfaces, and sampling systems. The 220 MHz maximum frequency also allows the multiplier to support demanding clock trees where the input reference operates below the final required output frequency. The 16-TSSOP surface-mount package supports compact PCB layouts and automated manufacturing. The device uses CMOS-compatible signals and a 3.0 V to 3.6 V supply range. These characteristics make it straightforward to pair with modern 3.3 V logic when signal levels, timing margins, and output-drive requirements are compatible. Designers should confirm the input and output frequency ranges, output configuration, clock-edge relationship, and load requirements from the manufacturer datasheet before finalizing a circuit. Typical uses include low-skew clock distribution for embedded processors, frequency generation for communication equipment, clocking in industrial automation systems, and reference-clock multiplication in test and measurement designs. In a fanout arrangement, the multiplier can create related clock outputs that are easier to distribute than attempting to fan out a high-frequency source directly. This approach helps preserve clock quality across multiple loads when the board layout is designed carefully. PCB layout is critical for any low-noise timing circuit. Keep the reference input, multiplier output, supply connections, and decoupling capacitors short, and route clock traces away from high-current switching nodes and noisy digital signals. Provide local supply bypassing and use a controlled ground return path to reduce power-supply noise and crosstalk. The device can be considered for industrial or communications designs, but qualification requirements for automotive, aerospace, or other specialized environments must be confirmed separately. The ICS601G-21 is a compact clock-and-timing solution for designs that need a multiplier with a 220 MHz maximum frequency, CMOS interfaces, and a 16-TSSOP package. Its low phase-noise positioning is useful when the clock source must be multiplied before distribution or when a system requires cleaner timing than a simple divider or general-purpose clock source provides. Final selection should account for the required multiplication ratio, output frequency, jitter, load capacitance, supply voltage, and clock-tree topology.

Запрос цены Контакты
ICS601M-01 - 156MHz Low-Phase-Noise PLL | Renesas
ICS601M-01

ICS601M-01 - 156MHz Low-Phase-Noise PLL | Renesas

Renesas Electronics ICS601M-01 is a single-output CMOS PLL clock synthesizer with a maximum output frequency of 156MHz, designed for low phase noise and low jitter. The device is available in a 16-pin SOIC package measuring 3.90mm wide and uses a 3V to 5.5V supply. Its clock-generation architecture provides a practical frequency multiplication solution for communications, digital signal processing, instrumentation, and other systems requiring a stable, low-noise reference-derived clock. A PLL clock synthesizer is a timing IC that multiplies a lower-frequency reference signal to produce a higher-frequency output while controlling phase noise and jitter. Within the broader clock and timing hierarchy, the ICS601M-01 belongs to the PLL and clock-multiplier family, where it sits between a stable reference source and downstream digital circuits. Its value is particularly evident in designs where directly generating a required clock frequency would otherwise be difficult or where multiplication from an existing reference is more convenient. The manufacturer describes the ICS601-01 family as a low-cost, low-phase-noise, high-performance clock synthesizer intended for applications requiring low phase noise and low jitter. The family is identified as ICS's lowest-phase-noise multiplier and lowest-CMOS part in the original product description. The ICS601M-01 combines a 156MHz maximum output with a 16-pin SOIC footprint, enabling compact implementation on conventional surface-mount PCB layouts. The 16-SOIC package measures 3.90mm in body width and is designed for surface-mount assembly. Operation from a 3V to 5.5V supply supports integration with common low-voltage CMOS logic families. According to the manufacturer datasheet, correct operation requires only 0.01uF and 0.1uF decoupling capacitors connected between VDD and GND and placed as close to the device as practical. Detailed frequency-range, jitter, phase-noise, and output-waveform limits should be taken from the specific manufacturer datasheet revision before release to production. Typical uses include generating a high-frequency processing clock from a lower-frequency oscillator, clocking communications receivers and transmitters, supporting digital signal-processing pipelines, and synthesizing clocks for industrial test equipment. In each case, the principal design question is whether the required output frequency, reference frequency, multiplication ratio, noise performance, and output format remain within the limits of the selected device and operating mode. For PCB implementation, prioritize short return paths and compact decoupling. Place the 0.01uF and 0.1uF capacitors between VDD and GND near the corresponding supply pins, maintain continuous ground reference beneath the device, and route sensitive clock traces away from high-current switching nodes. Avoid long stubs and unnecessary test-point branches on the output because they can increase reflections and degrade timing margin. This product page combines the manufacturer clock-synthesizer description, package information, decoupling guidance, drop-in family options, application guidance, and engineering design notes. It is intended to help engineers identify the correct Renesas ordering suffix, plan a compatible 16-SOIC layout, and evaluate ICS601M-01 for applications where low phase noise, low jitter, and 156MHz maximum clock performance are important.

Запрос цены Контакты
ICS601R-25 - 156MHz 1:5 Clock Multiplier | Renesas
ICS601R-25

ICS601R-25 - 156MHz 1:5 Clock Multiplier | Renesas

Renesas Electronics ICS601R-25 is a CMOS clock multiplier that multiplies an input clock by five, with a listed maximum output frequency of 156 MHz, and is packaged in a 20-pin SSOP. The device is intended for systems requiring low phase noise, low jitter, and low-skew clock distribution. Its one-to-five multiplication ratio allows a comparatively low-frequency reference to drive a higher-frequency clock without requiring a large PLL multiplier ratio. A clock multiplier is a clock-and-timing IC that generates an output clock from an external reference. It belongs to the broader timing-control hierarchy of clock generators, phase-locked loops, frequency synthesizers, and CMOS clock distribution. Unlike a free-running oscillator, the ICS601R-25 requires an external input clock and preserves the relationship between input and output edges, making it useful when an existing system clock must be multiplied while maintaining predictable phase and timing relationships. The ICS601R-25 is identified as a low-cost, low-phase-noise, high-performance clock synthesizer. Its five-times multiplication ratio and 156 MHz maximum output frequency make it suitable for communications, industrial control, consumer electronics, and digital systems that need a distributed clock derived from a stable reference. The low-skew and low-jitter characteristics are particularly relevant when multiple downstream circuits must operate from a common multiplied clock. Because the device uses a multiplier rather than a conventional fractional-N PLL, its design is centered on preserving the incoming reference relationship while producing a higher-frequency output. Power-supply design, output clock routing, and reference-clock stability remain the primary engineering considerations. Short traces, controlled return paths, and appropriate decoupling help prevent supply and trace effects from degrading the clock edge presented to the load. Typical uses include clock generation for communications equipment, digital controllers, data-processing systems, and low-skew fanout networks. The external reference permits the system designer to define timing accuracy and jitter performance primarily through the reference source and interconnect design. This makes the ICS601R-25 appropriate where multiplying an established system clock is preferable to adding another independent oscillator. For PCB implementation, place the decoupling capacitor adjacent to the supply pin and route the reference and output-clock nets away from noisy switching nodes. Preserve a continuous ground reference beneath the clock path, and terminate unused outputs according to the manufacturer's recommendations. Validate output frequency, duty cycle, edge quality, and fanout behavior in the final board environment. This product page combines the manufacturer function description, package information, order-code distinctions, and practical clock-design guidance. It also organizes drop-in comparisons and selection questions around the practical constraints engineers face when replacing or sourcing a 1:5, 156 MHz CMOS clock multiplier.

Запрос цены Контакты
ICS613M - Low Phase Noise Clock Multiplier | Renesas
ICS613M

ICS613M - Low Phase Noise Clock Multiplier | Renesas

The Renesas Electronics ICS613M is a low-cost, low-phase-noise, high-performance clock synthesizer and clock multiplier in a 16-pin SOIC package. It is positioned for applications requiring low phase noise and low jitter, and the manufacturer describes it as the ICS family's lowest-phase-noise multiplier. The ICS613M belongs to the clock synthesizer and PLL frequency-synthesizer segment of the broader clock and timing IC category. A clock multiplier is a timing IC that derives one or more higher-frequency clock outputs from a lower-frequency reference input. By multiplying the reference frequency while preserving low phase noise, this type of device can support clock trees, communication interfaces, digital processing systems, and mixed-signal equipment. In the electronics hierarchy, the ICS613M is a clock synthesizer, then a clock and timing IC, then an integrated circuit and semiconductor. The primary verified feature of the ICS613M is its low phase-noise performance. Low phase noise is important when clock timing jitter can degrade signal integrity, reduce usable timing margin, or increase data-conversion errors. Its low-cost positioning also makes it relevant to designs that require stable frequency generation without selecting a higher-cost premium clock-generation solution. The available technical data does not provide a numerical phase-noise, jitter, frequency, or supply-voltage rating. The ICS613M is identified as the lowest-phase-noise multiplier within the ICS family, indicating that its clock multiplication architecture was optimized specifically for phase-noise-sensitive designs. Clock multiplication can reduce the need for multiple independent oscillators and allows a system to derive related timing signals from a common reference. Designers must still account for loop stability, reference quality, output-load capacitance, and the multiplication ratio required by the target system when evaluating the device. Typical applications include communications infrastructure, digital signal processing platforms, instrumentation, industrial control systems, and clock-tree generation where a common reference must be converted into additional timing domains. The 16-pin SOIC package supports conventional surface-mount PCB assembly and is suitable for designs that do not require a specialized leadless package. Exact frequency, supply, output, and stability limits must be confirmed from the complete manufacturer datasheet before schematic release. The principal design consideration is verification of operating conditions. The visible verified data confirms the device category, low-phase-noise positioning, clock-multiplier function, and 16-pin SOIC package, but it does not expose the electrical tables needed to select compensation, loop, decoupling, or output components. A design should therefore preserve the 16-pin footprint only after checking the complete pin assignment and confirming all required frequency ratios. This product record consolidates verified distributor availability, manufacturer-described clock performance, package information, application guidance, and honest data gaps into one engineering-oriented resource. It also distinguishes confirmed facts from parameters that still require the full Renesas or legacy ICS datasheet, helping teams accelerate sourcing without turning incomplete search results into unsupported design assumptions.

Запрос цены Контакты
ICS613MT - 157.5MHz Low-Phase-Noise Clock Multiplier | Renesas
ICS613MT

ICS613MT - 157.5MHz Low-Phase-Noise Clock Multiplier | Renesas

Renesas ICS613MT is a low-phase-noise clock multiplier and frequency synthesizer with a maximum operating frequency of 157.5MHz. The device accepts clock or crystal inputs, includes a PLL, and provides a CMOS clock output in a 16-SOIC package. Its nominal input-to-output ratio is 2:2, making it suitable for systems that require a multiplied or regenerated clock with low phase noise and low jitter. A clock multiplier is a type of clock and timing integrated circuit that multiplies an input frequency while preserving the required phase relationship between input and output. Clock multipliers and frequency synthesizers form part of the wider clock generation, timing control, and power management hierarchy used to distribute precise timing signals among processors, communication links, converters, and data-conversion systems. The ICS613MT combines a PLL-based architecture with a maximum frequency of 157.5MHz. Its input section supports either a clock or crystal source, while the single CMOS output stage provides a compatible interface for digital timing circuits. The 2:2 ratio provides a straightforward multiplication relationship, reducing the need to redesign the surrounding clock tree when a higher-frequency reference is required. Phase noise and jitter are critical in high-speed digital systems because timing uncertainty limits usable bandwidth, increases communication error margins, and can degrade the effective resolution of converters. The ICS613MT is positioned as a low-cost, low-phase-noise clock synthesizer for applications requiring low phase noise and low jitter. Its single-clock architecture also helps simplify routing and reduces the number of independent timing branches that must be controlled on the PCB. Typical uses include communications infrastructure, clocked data converters, digital signal processing modules, industrial control equipment, and embedded systems that require a deterministic local clock source. The device is also applicable when an existing low-frequency reference must be converted into a higher-frequency timing signal without relying on a more complex frequency synthesizer. The primary design consideration is the relationship between the input source, crystal or clock requirements, and the intended output frequency. PCB layout should preserve a short and controlled path from the timing source to the input pins and from the device to the load. Power-supply decoupling, output fanout, and return-path continuity should be evaluated together because clock edges must remain clean at the receiver. This product overview consolidates the ICS613MT clocking function, package information, key electrical characteristics, design guidance, sourcing information, and the limits of currently documented replacement options. Engineers should use the manufacturer datasheet for final pin assignments, recommended application circuits, operating limits, and timing parameters before releasing a production design.

Запрос цены Контакты
ICS621MI - 1:4 200MHz Low-Skew Clock Buffer | Renesas
ICS621MI

ICS621MI - 1:4 200MHz Low-Skew Clock Buffer | Renesas

Renesas Electronics ICS621MI is a low-skew 1-to-4 clock fanout buffer rated for 200 MHz operation and supplied in an 8-pin SOIC package measuring 0.154 inch, or 3.90 mm, in body width. The device provides one clock input and four buffered clock outputs for distributing a common timing signal across multiple circuit loads. According to the verified manufacturer and distributor information, its operating supply range is 1 V to 1.8 V, while its input is tolerant of 3.3 V signals. This combination allows it to be used in mixed-voltage clock-distribution networks where a lower-voltage core or peripheral must be driven from a higher-voltage clock source. A clock buffer is a digital timing IC that reproduces an input clock onto multiple outputs. It belongs to the clock and timing hierarchy, alongside clock generators, dividers, multiplexers, and phase-shifting circuits, and is used within digital logic and communications equipment. Unlike a PLL-based clock generator, the ICS621MI does not create a new frequency; its purpose is to fan out one source while limiting skew between destinations. That makes it useful when several sequential circuits must receive related clock edges and when added routing distance could otherwise distort arrival timing. The verified headline specifications are a 1:4 fanout ratio, a maximum indicated operating frequency of 200 MHz, a 1 V to 1.8 V supply range, 3.3 V tolerant input, low-skew operation, and an 8-SOIC package. The 3.3 V tolerant input is particularly useful at system interfaces because it permits a 3.3 V-domain clock source to feed the buffer without a separate input translator. The low-voltage 1 V to 1.8 V operating range suits modern high-performance digital cores requiring compact, low-power clock distribution. The primary engineering benefit is the relationship between fanout and timing control. One source clock is distributed to four outputs rather than being connected to four loads directly. The buffer isolates the source from downstream capacitive loading and provides matched output paths intended to reduce output-to-output skew. Because the available verified material does not publish a numeric skew value, input capacitance, output rise or fall time, or propagation-delay tolerance, those characteristics should be obtained from the manufacturer datasheet before relying on a margin in a timing-critical design. Typical applications include high-speed digital logic, processor clock distribution, communications equipment, memory interfaces, and general-purpose fanout of a board-level or module-level clock. In each case, the designer must ensure that the source remains within the specified frequency, power-supply voltage, and input-signal limits. Decoupling close to the supply pins and short, impedance-controlled clock routes are also important because package and board parasitics can affect edge quality even when the nominal fanout and frequency ratings are satisfied. A key design consideration is that pin-compatible does not always mean timing-identical. Before substituting another fanout buffer, verify package dimensions, input and output pin positions, supply range, output-drive capability, propagation delay, output skew, operating temperature, and the definition of the enable or output-control behavior. These checks are especially important when the replacement operates from a different voltage range or has different edge-rate characteristics. This page combines the verified distributor data, package information, interface capabilities, and application guidance into a focused engineering reference for the ICS621MI.

Запрос цены Контакты
ICS621MIT - 1:4 200MHz Clock Buffer | Renesas Electronics
ICS621MIT

ICS621MIT - 1:4 200MHz Clock Buffer | Renesas Electronics

Renesas Electronics ICS621MIT is a low-skew 1-to-4 clock buffer operating up to 200 MHz in an 8-SOIC package. It accepts one clock input and provides four buffered clock outputs, allowing a single low-frequency source to drive multiple timing-critical loads while reducing fanout loading. The 8-SOIC package is a surface-mount option for compact digital, communications, networking, and test equipment designs. A clock buffer is a digital timing IC that reproduces a clock signal through one or more output stages. Clock buffers and clock drivers belong to the broader clock and timing IC category, where their practical role is to isolate a source from capacitive loading, extend signal reach, and distribute a common timing reference. In a multi-load system, a buffer helps each receiver see a cleaner transition sequence than it would when connected directly to a long or heavily loaded clock trace. The principal characteristics of ICS621MIT are its 1:4 fanout ratio, 200 MHz maximum clock frequency, low-skew architecture, and 8-SOIC package. A 1:4 ratio means that one incoming clock can feed four output branches, reducing the number of separate distribution stages required in a moderate-complexity system. The 200 MHz operating capability makes the device relevant to designs carrying clock signals in the hundreds-of-megahertz range, subject to the complete electrical limits and layout guidance in the manufacturer datasheet. Because the ICS621MIT performs digital fanout rather than voltage conversion, its signal path is intended to preserve clock timing relationships across the four outputs. Low skew is particularly relevant when multiple receivers must operate from the same edge, including parallel data converters, sequential logic, communications equipment, and automated test systems. The exact propagation-delay, output-impedance, rise-time, fall-time, supply-voltage, and temperature limits should be taken directly from the 621 datasheet before final timing and power-budget calculations. Typical uses include clock distribution for communication equipment, fanout in network interfaces, test-and-measurement systems, and synchronization among multiple digital subsystems. It can also serve as an interface between a central clock source and several low-to-moderate-capacitance loads when the board requires a dedicated fanout stage. Its eight-pin package also keeps the footprint compact while exposing one input, four outputs, power connections, and ground in a conventional small-outline arrangement. Layout should prioritize short clock traces, a continuous ground reference, and placement of the device near the clock source or the group of receivers it serves. Avoid routing sensitive clock nets beneath unrelated noisy circuitry, and terminate or control unused outputs according to the manufacturer's guidance. Validate timing at the intended frequency, load capacitance, supply voltage, temperature, and process corner because fanout buffers can change edge rate and edge-to-edge alignment as loading changes. This product page combines the core device identity, verified manufacturer documentation, a same-package replacement candidate, application-oriented engineering guidance, and a structured comparison of the information needed for clock-tree design. It is intended to help engineers identify whether the 1:4, 200 MHz ICS621MIT architecture fits a board before undertaking detailed datasheet verification and board-level qualification.

Запрос цены Контакты
ICS650G-36 25MHz PCI Clock Generator | Renesas
ICS650G-36

ICS650G-36 25MHz PCI Clock Generator | Renesas

Renesas Electronics ICS650G-36 is a low-cost PCI and networking clock generator with one 25 MHz crystal input and four CMOS clock outputs. It uses analog/digital phase-locked-loop techniques to support LAN, PCI, and 100M SDRAM clock requirements. The device supports PLL bypass operation and is packaged in a 16-pin TSSOP. A clock generator is a timing IC that creates one or more deterministic clock signals for digital systems. Clock and timing ICs sit within the broader semiconductor hierarchy and distribute reference frequencies to processors, memory, network controllers, and bus interfaces. The ICS650G-36 accepts either a crystal or clock input, locks the internal PLL to that reference, and supplies four related output clocks. This arrangement allows one reference source to support several legacy computing and networking clock domains. Key features include a maximum frequency of 25 MHz, one clock circuit, a 1:4 input-to-output ratio, CMOS outputs, and PLL operation with bypass capability. The PLL multiplier allows a 25 MHz fundamental-mode crystal reference to produce four output clocks. Bypass functionality is useful during startup, test, or configurations where direct reference-clock distribution is preferable. The 16-pin TSSOP package supports conventional surface-mount PCB assembly. Internally, the ICS650G-36 combines analog and digital phase-locked-loop techniques with a standard fundamental-mode crystal input. Its architecture is intended to provide multiple clocks from one inexpensive reference while supporting the clocking requirements associated with LAN, PCI, and 100M SDRAM systems. Exact acquisition behavior, output-frequency configuration, voltage limits, and jitter characteristics should be confirmed in the manufacturer datasheet before layout release. Typical applications include legacy PCI peripheral boards, networking equipment, 100M SDRAM memory interfaces, Ethernet controllers, and embedded systems requiring multiple synchronized clock outputs. The four-output arrangement reduces the number of separate oscillators and clock distribution components required on a board. It is particularly relevant to designs based on older PCI and 100M SDRAM architectures rather than modern high-speed server clocking requirements. For implementation, follow the reference circuit and pin-connection details in the manufacturer datasheet, especially for the crystal or external-clock input and unused outputs. Confirm the bypass configuration and output routing for each target bus. PCB signal-integrity practices should include short clock traces, continuous reference planes, and deliberate return paths; CMOS clock outputs also require suitable termination for the selected trace impedance. This product page combines the manufacturer’s application description with verified device attributes, ordering-variant references, a parameter comparison, and practical implementation guidance. It also identifies where additional electrical, environmental, lifecycle, and pin-level information must be checked before production release.

Запрос цены Контакты
ICS650G-40 Ethernet Switch Clock Source | Integrated Circuit Systems
ICS650G-40

ICS650G-40 Ethernet Switch Clock Source | Integrated Circuit Systems

The Integrated Circuit Systems ICS650G-40 is a clock synthesizer and Ethernet switch clock source with a PLL, crystal or clock input, and clock output. It accepts a 25 MHz crystal input and generates selectable output clock frequencies for Ethernet switch designs. The device is associated with a 1:3 input-to-output ratio, one PLL circuit, and a maximum listed input frequency of 25 MHz. A clock synthesizer is a type of frequency-generation IC used to derive stable timing signals from a common reference. Within the product hierarchy, the ICS650G-40 belongs to the clock and timing IC family, which sits within interface and network-clocking systems. Ethernet switches require multiple related clocks for transceiver interfaces, switching logic, packet processing, and system management. A programmable clock source allows one reference oscillator to support several clock domains while reducing the number of discrete timing components. The principal feature of the ICS650G-40 is its phase-locked-loop architecture. The PLL can divide or multiply the input reference to produce the output frequencies selected through the device's output-select interface. Its 25 MHz reference input provides a common timing foundation for Ethernet switch clock trees. The 1:3 ratio associated with related ICS650G-40 variants provides a useful implementation option when the required system clock is three times the reference frequency. This clock source is intended specifically for Ethernet switch applications rather than general-purpose timing distribution. Its integrated PLL can reduce the number of separate dividers and oscillators needed around a switching ASIC. The 16-TSSOP package identified for related ICS650G-40A variants also reflects a compact surface-mount format appropriate for communications equipment, although engineers should verify the exact land pattern and pin assignment for the ordering code being placed on the PCB. Typical uses include core-clock generation for Ethernet switching silicon, clock-tree support in network interface cards, and timing generation in managed or unmanaged switching platforms. The device can be especially useful where several subsystems must operate from one 25 MHz crystal reference while requiring selectable output-clock options. PCB design should preserve short, clean clock traces and provide a stable reference source with appropriate grounding. Keep sensitive oscillator and PLL traces away from high-current switching nodes, and use the manufacturer pin-description table to assign every signal correctly. Confirm output frequency, enable behavior, supply requirements, and load capability against the datasheet before releasing a production layout. This product page combines the Ethernet clock-source function, PLL characteristics, package considerations, application guidance, and substitution constraints into an engineering-focused guide. It also distinguishes verified drop-in candidates from suffix-only ordering options that should not be assumed to be interchangeable without package and pin verification.

Запрос цены Контакты
ICS650R-01 - 66.67MHz PLL Clock Synthesizer | Renesas
ICS650R-01

ICS650R-01 - 66.67MHz PLL Clock Synthesizer | Renesas

The Renesas Electronics ICS650R-01 is a clock and frequency synthesizer IC that generates up to 66.67 MHz from a 14.31818 MHz parallel-resonant crystal reference. It uses analog and digital phase-locked-loop techniques, includes PLL bypass capability, and provides a CMOS output in a 20-pin SSOP package measuring 3.90 mm wide. The device is intended for system-peripheral clocking and other applications requiring a stable, low-jitter reference-derived clock. A clock synthesizer is an integrated timing device that converts a lower-frequency reference into one or more higher-frequency signals. Clock synthesizers commonly use a phase-locked loop, or PLL, to lock a voltage-controlled oscillator to an external crystal or clock source. Within the broader semiconductor hierarchy, the ICS650R-01 belongs to the clock and timing IC family, where it provides frequency multiplication and clock-distribution functions for digital systems. The principal features of the ICS650R-01 include a maximum output frequency of 66.67 MHz, support for either crystal or clock input, CMOS output signaling, and a PLL with bypass. The 14.31818 MHz reference associated with this device is the classic frequency used for NTSC-related timing systems. The PLL architecture allows the output to be derived from a stable crystal source while retaining bypass flexibility for test and clock-source transition scenarios. The ICS650R-01 uses phase-locked-loop techniques to establish the relationship between its reference input and synthesized output. The bypass function gives a system designer an alternate clock path when direct use of the source clock is preferable. Because the output is CMOS and reaches 66.67 MHz, board-level implementation requires careful attention to trace impedance, return paths, ground integrity, and clock-edge margin. The 20-pin SSOP footprint supports conventional surface-mount assembly and is suitable for compact peripheral-clock circuitry. Typical applications include legacy video and display timing, computer and peripheral clock generation, communication equipment, industrial control systems, and digital logic requiring a derived clock from a crystal source. The ICS650R-01 is particularly relevant to retrofits and repairs of equipment designed around the 14.31818 MHz reference and 66.67 MHz synthesized output. Its CMOS output can feed compatible counters, divider stages, timing controllers, and other clock-domain logic when voltage and frequency requirements are met. Design should begin by confirming the required reference frequency, output frequency, output amplitude, load capacitance, supply voltage, and operating-temperature range against the manufacturer datasheet. Place the crystal and associated load network close to the clock input, maintain a continuous ground reference beneath clock circuitry, and avoid routing the sensitive reference node beside switching nodes. Because no complete operating electrical table or timing characteristics are stated on the product listing, those limits must be taken directly from the manufacturer datasheet before production release. This product page combines the documented clock-source function, package information, replacement guidance, application-oriented engineering context, and a package-matched comparison framework. It also distinguishes electrically similar ordering variants from confirmed alternatives, helping designers identify the correct device without relying solely on a clock frequency or package name.

Запрос цены Контакты
ICS650R-07 - Low-Jitter Networking Clock Source | Renesas
ICS650R-07

ICS650R-07 - Low-Jitter Networking Clock Source | Renesas

The Renesas Electronics ICS650R-07 is a low-cost, low-jitter, high-performance system-peripheral clock synthesizer for networking equipment, supplied in a 20-SSOP package. It accepts a 14.31818 MHz parallel-resonant crystal reference and uses analog and digital phase-locked-loop techniques to generate the clock required by system peripheral circuitry. The device is described as a networking clock source in distributor catalogs and as a system-peripheral clock source in technical documentation. A clock synthesizer, also called a PLL clock generator, produces one or more stable frequencies from a single reference crystal. Its position in the signal chain is oscillator or crystal reference to clock synthesizer to digital logic clock distribution. This hierarchy makes the ICS650R-07 useful when a board needs a defined internal clock rather than a free-running digital oscillator, especially in legacy network-interface, storage, controller, and communications equipment. The primary advantages of the ICS650R-07 are its low cost, low jitter, and high-performance PLL-based frequency generation. Its 14.31818 MHz crystal input supports designs built around the standard parallel-resonant reference commonly associated with communications clock architectures. The 20-SSOP package is compact enough for established peripheral-controller layouts while remaining a surface-mount part suitable for automated assembly. The manufacturer documentation also identifies an ICS650-07B derivative customized for Broadcom applications, indicating a related clock-source family with different ordering and qualification options. Internally, the device combines analog and digital phase-locked-loop techniques rather than relying on a simple frequency multiplier with free-running outputs. PLL-based synthesis allows the output frequency to be referenced to the external crystal, which supports repeatable clock generation across temperature and supply conditions. Exact operating ranges, frequency tolerances, jitter limits, supply voltage, and output-drive details must be taken from the manufacturer datasheet for the specific ordering code before release qualification. Typical uses include networking-interface clock trees, system-peripheral controllers, communications modules, and legacy server or storage peripheral boards. It is particularly relevant when the PCB already accepts a 20-SSOP clock-source position and requires a reference-derived peripheral clock. For new designs, engineers should confirm that the crystal frequency, target PLL output, loop-filter configuration, and decoupling requirements match the intended system architecture rather than treating the part as a generic free-running oscillator. The principal design constraint is that the ICS650R-07 is an older clock-source family rather than a modern low-power clock generator. Its lifecycle, operating-temperature grade, and RoHS status require review for regulated or new-production programs. A legacy board can often retain its existing crystal and PLL component arrangement, but a redesign should compare phase noise, jitter, supply current, maximum frequency, and qualification status against current clock-generator families. This page organizes the clock-source role, package details, verified catalog information, drop-in family alternatives, and application guidance in one engineering-focused reference. It also distinguishes device functions that can be confirmed from the manufacturer datasheet from parameters that require a full engineering review before schematic release or production qualification.

Запрос цены Контакты
ICS650R-12 MPEG Clock Synthesizer | Renesas Electronics
ICS650R-12

ICS650R-12 MPEG Clock Synthesizer | Renesas Electronics

The Renesas Electronics ICS650R-12 is an MPEG clock synthesizer for system-peripheral clock generation, with a 14.31818 MHz crystal input and clock output in a 20-pin SSOP package. It uses analog and digital phase-locked loop techniques to generate the timing signals required by MPEG and related digital systems. The device is specified as a low-cost, low-jitter, high-performance clock synthesizer with one clock synthesis circuit, surface-mount construction, and an operating temperature range of 0°C to 70°C. A clock synthesizer is a timing IC that converts a stable reference frequency into one or more derived clock signals. Clock synthesizers and PLL-based timing devices form part of the clock and timing hierarchy within integrated circuits, where they sit between a crystal or oscillator reference and the digital logic requiring synchronized system clocks. The ICS650R-12 family is intended for system-peripheral applications, making its reference frequency, output behavior, and board footprint the principal design considerations. Key characteristics include one clock-generation circuit, a crystal-based reference input, clock output, low-jitter operation, and a 20-pin SSOP package. Its surface-mount construction supports compact consumer and industrial equipment designs, while the specified 0°C to 70°C operating range makes it appropriate for room-temperature commercial environments. The MPEG designation identifies its intended timing role, while the PLL architecture provides frequency multiplication and clock-generation flexibility relative to a simple buffered crystal oscillator. The ICS650R-12 is identified as an obsolete or end-of-life component. New production should therefore be approached cautiously, while existing equipment may require a form-fit-function replacement or a deliberate clock-tree redesign. Because the device is no longer active, engineers should confirm lifecycle status, electrical limits, pin mapping, crystal requirements, and output timing before committing a replacement to production. Typical uses include MPEG decoder and encoder platforms, multimedia processing systems, digital set-top equipment, and other system-peripheral subsystems requiring a synthesized clock. In these systems, the crystal reference establishes the timing foundation while the synthesizer distributes a stable derived clock to processors, memory interfaces, converters, and other clock-consuming blocks. This integration reduces the number of separate oscillators required in a multi-clock design. PCB implementation requires close attention to the 20-pin SSOP footprint, crystal support components, trace lengths, and grounding. Place the reference-crystal network near the device, keep clock traces short, maintain a continuous ground reference, and follow the manufacturer pin-description table when assigning every connection. Review the obsolete-part notices and cross-reference tools before redesigning around a different PLL or clock generator. This page consolidates lifecycle information, confirmed device characteristics, practical application guidance, and verified replacement constraints. It also separates known specifications from parameters that require confirmation from the manufacturer datasheet, helping engineers make an informed sourcing or redesign decision for this legacy MPEG clock synthesizer.

Запрос цены Контакты
ICS651M - 1:4 200MHz Clock Fanout Buffer | Renesas
ICS651M

ICS651M - 1:4 200MHz Clock Fanout Buffer | Renesas

The Renesas Electronics ICS651M is a 1:4 clock fanout buffer distribution IC designed for clock signals up to 200 MHz, supplied from 1.425 V to 2.625 V and packaged in an 8-SOIC. Its single clock input feeds four clock outputs, making it useful when several digital subsystems must receive a common timing reference. A clock fanout buffer is a clock and timing IC that reproduces one input clock across multiple outputs. It belongs to the clock distribution hierarchy, where a buffer preserves edge-driven timing while increasing fanout, isolating source loading, and giving short, controlled routes to multiple receivers. Unlike a frequency-changing oscillator or PLL, the ICS651M does not create a new frequency; it distributes the supplied clock and is intended to maintain low-skew operation. The principal verified features are the 1:4 fanout ratio, 200 MHz maximum operating frequency, clock input and clock outputs, and 1.425 V to 2.625 V supply range. The 8-SOIC package measures 0.154 inches, or 3.90 mm, in width. These values position the part as a compact, low-voltage clock distribution solution where four copies of one clock are required rather than programmable or multiplied clock synthesis. Use the ICS651M after a stable clock source when the next circuit stages would otherwise load a single output excessively or require long branches to remote logic. Equalizing trace geometry and keeping the input and output return paths close to a continuous ground plane can help control propagation-delay differences among outputs. Engineers must also verify downstream input thresholds, output timing at the actual operating frequency, and termination requirements for each clock network. Typical uses include coordinating clock domains in processors, FPGAs, communications equipment, test systems, and digital control logic. The device may be particularly useful where one low-voltage master clock must reach four independent loads without repeatedly branching a long net. Because its verified maximum frequency is 200 MHz, timing margins should be evaluated at the highest intended edge rate rather than relying only on the nominal operating frequency. Place all four clock outputs into controlled PCB routes, avoid long stub traces, and provide a low-impedance return path beneath every clock edge. If unused outputs are left unconnected, their exact treatment should be confirmed from the manufacturer datasheet. Decoupling, output enable, and input-standby behavior were not included in the supplied search evidence and must be checked before layout approval. This page consolidates verified distributor specifications, sourcing links, application context, and design cautions. Where primary documentation was unavailable in the supplied data, unknown electrical details remain explicitly marked rather than being estimated.

Запрос цены Контакты
ICS651MI - 1:4 200 MHz Clock Fanout Buffer | Renesas Electronics
ICS651MI

ICS651MI - 1:4 200 MHz Clock Fanout Buffer | Renesas Electronics

The Renesas Electronics ICS651MI is a low-skew, single-input to four-output clock fanout buffer rated for operation up to 200 MHz, supplied in an 8-SOIC package. Its 1:4 fanout ratio provides one clock distribution function for driving four downstream destinations, while its 1.425 V to 2.625 V supply range supports low-voltage digital clocking systems. The verified distributor and technical listings identify the device as a Clock Fanout Buffer (Distribution) IC with clock input and clock outputs. A clock fanout buffer is a clock-and-timing IC that receives one periodic signal and produces multiple buffered copies. It belongs to the broader clock-buffer and clock-driver hierarchy, where buffers are used to extend fanout, isolate a source from downstream loading, reduce edge-rate degradation, and distribute a common timing reference. The ICS651MI therefore serves as an interface between a clock source and several digital loads rather than as a frequency-generating or phase-locked-loop device. The principal verified specifications are a 1:4 fanout ratio, a maximum operating frequency of 200 MHz, a 1.425 V to 2.625 V supply-voltage range, and an 8-SOIC package measuring 3.90 mm in width. The low-skew description indicates that the device is intended to preserve close timing relationships among its four outputs. This makes it potentially useful in communications, processor systems, test equipment, and other clocked digital equipment when one source must feed several destinations. The ICS651MI uses a clock input and four clock outputs, providing eight functional connections in the 8-SOIC package. The public search results supplied for this product do not expose the complete numbered pin assignments, enable controls, output-drive strength, propagation-delay limits, or detailed electrical characteristics. Those values must therefore be confirmed against the manufacturer datasheet before layout or timing-signoff work. Renesas provides an official ICS651MI family datasheet page at the URL included in this record. Typical applications include four-way clock distribution within communications equipment, fanout for processor or logic clock trees, clock buffering in industrial control systems, and synchronized distribution to multiple digital peripherals. In each case, the 200 MHz maximum frequency and four outputs are the main selection criteria. The designer should also verify input and output capacitance, supply tolerance, output enable behavior, and package-level timing data because those details are not present in the verified excerpts supplied here. A key design consideration is that a buffer does not remove all timing uncertainty from the downstream system. Trace lengths, load capacitance, supply noise, and clock-tree topology can still affect edge arrival times. Place the buffer close to the clock source, keep output routing topology consistent where skew matters, and use controlled-impedance routing when outputs drive transmission lines. Confirm that every downstream receiver meets the available amplitude, slew-rate, and timing requirements at the selected operating frequency. This page consolidates the verified distributor listings, manufacturer datasheet reference, package information, electrical envelope, and practical selection considerations for ICS651MI. It also distinguishes directly verified facts from unavailable electrical details and avoids presenting unverified cross-references as drop-in replacements. The resulting guidance is intended to support initial design selection, sourcing, and datasheet review without substituting for schematic-level timing and signal-integrity validation.

Запрос цены Контакты
ICS651MIT - 1-to-4 200 MHz Clock Buffer | Renesas
ICS651MIT

ICS651MIT - 1-to-4 200 MHz Clock Buffer | Renesas

Renesas Electronics ICS651MIT is a low-skew 1-to-4 fanout clock buffer with a maximum operating frequency of 200 MHz and a supply-voltage range of 1.425 V to 2.625 V. The device is packaged in an 8-SOIC measuring 3.90 mm wide and is designed to distribute one input clock across four outputs while limiting output-to-output timing skew. A clock fanout buffer is a clock-and-timing integrated circuit that replicates a periodic signal to multiple destinations. Within the broader semiconductor hierarchy, it belongs to clock and timing ICs, then clock buffers and drivers, and ultimately digital logic. Unlike a clock generator, it does not create a new reference frequency; instead, it buffers an existing clock so multiple circuits can receive controlled copies with predictable timing relationships. The primary features of ICS651MIT are its 1-to-4 fanout architecture, 200 MHz maximum frequency, and 1.425 V to 2.625 V operating supply range. These characteristics make it suitable for low-voltage digital systems that need to distribute a common clock among processors, memory controllers, communication circuits, or custom logic. Its low-skew design helps limit the difference in arrival time between the four buffered outputs. ICS651MIT belongs to the ICS ClockBlocks family and is positioned as a small, low-skew clock buffer. The 8-SOIC package provides a compact surface-mount implementation for applications that do not require the zero-delay or PLL-based functions offered by more complex clock products. Each buffered output should be treated as a separate clock load, so trace length, loading, and downstream capacitance remain important considerations. Typical uses include clock distribution in communications equipment, digital logic subsystems, processor clock trees, and embedded control systems. In a multi-destination design, the single clock input can feed four independently routed outputs, reducing duplicated clock-generation circuitry. The part is especially relevant where several sequential circuits must operate from the same timing reference on a low-voltage supply. Layout quality directly affects clock integrity in a fanout network. Place the input and output decoupling capacitors close to their associated pins, keep output routes short where possible, and avoid routing clock signals through noisy analog or switching-power regions. Maintain a continuous return path beneath or adjacent to each clock trace and observe the device's recommended input and output loading limits from the manufacturer datasheet. This product page organizes the core electrical characteristics, package information, application guidance, datasheet access, and design considerations for ICS651MIT. It also identifies where replacement verification requires a direct comparison of pinout, supply voltage, frequency, output behavior, and propagation delay before any substitute is approved for production.

Запрос цены Контакты
ICS651MT - 200MHz 1:4 Clock Buffer | Renesas | 8-SOIC
ICS651MT

ICS651MT - 200MHz 1:4 Clock Buffer | Renesas | 8-SOIC

The Renesas Electronics ICS651MT is a 1:4 fanout clock buffer with a maximum operating frequency of 200 MHz, a 1.425 V to 2.625 V supply-voltage range, and an 8-pin SOIC package. The device accepts one clock input and provides four buffered clock outputs, making it suitable for distributing a low-frequency clock across multiple digital, communications, or embedded-system loads. A clock buffer, also called a clock driver or fanout buffer, is a digital timing IC that reproduces an input clock onto multiple outputs with controlled propagation delay and low output-to-output skew. Clock buffers belong to the clock and timing hierarchy, alongside clock generators, phase-locked loops, jitter cleaners, dividers, and delay lines. Their purpose is to restore signal integrity, isolate the source from capacitive loading, and provide matched clock branches in systems where a single clock cannot directly drive every destination. The ICS651MT is identified as a low-skew, single-input, four-output clock buffer in the ICS ClockBlocks family. Verified specifications list a maximum frequency of 200 MHz, a 1.425 V to 2.625 V supply range, 250 ps skew, and a commercial operating-temperature range of 0 C to 70 C. Its four-output architecture supports economical distribution without implementing four separate discrete buffers. The SOIC-8 package also supports conventional surface-mount manufacturing and inspection processes. Operationally, the buffer preserves the clock waveform while adding fanout capability. The verified datasheet guidance specifies a 0.01 uF decoupling capacitor between VDD on pin 7 and GND on pin 6, placed as close to the device as possible. It also states that a 33 ohm series terminating resistor may be used on each clock output when the trace is longer than 1 inch. These recommendations reduce supply-noise coupling, ringing, and reflections on longer clock routes. Typical uses include processor-clock distribution in embedded equipment, communication-interface clock fanout, general-purpose logic clock distribution, and fanout for digital converters or controllers. Because this is a four-output buffer rather than a clock generator, an external clock source is required. The source must provide a valid clock waveform within the device's specified frequency and supply-voltage limits, and each connected load must be checked for timing margin. The primary design trade-off is output loading versus timing margin. Short, lightly loaded traces may not need source termination, while long PCB routes can develop edge reflections that reduce setup and hold margin. Place the decoupling capacitor at the supply pins, use short output branches, and evaluate rise time, fanout, and skew at the actual operating frequency before releasing the layout. This product page consolidates the verified clock-buffer specifications, application guidance, comparison fields, and practical implementation notes. It distinguishes documented electrical and packaging data from unavailable lifecycle, pricing, and pinout details so engineers can make sourcing decisions without treating unverified values as established facts.

Запрос цены Контакты
ICS660GI - NTSC/PAL Video Clock Generator | Renesas
ICS660GI

ICS660GI - NTSC/PAL Video Clock Generator | Renesas

The Renesas Electronics ICS660GI is a digital video clock source and video generator IC for NTSC and PAL systems, supplied in a 16-pin TSSOP package. It provides clock generation and conversion for digital video equipment, including formats associated with MPEG, NTSC, PAL, and HDTV video timing. The ICS660GI is intended for designers requiring a dedicated timing source for video processing, synchronization, and conversion circuits. Its 16-TSSOP package supports compact PCB layouts in professional video, broadcast, industrial imaging, and test equipment designs. A digital video clock source is a timing IC that generates or converts clock signals used to synchronize video processing blocks. Digital video systems require consistent horizontal and vertical timing across multiple functional stages. The ICS660GI belongs to the broader clock and timing IC hierarchy, where clock generators and frequency converters support video timing, clock distribution, and signal-chain synchronization in electronic equipment. The principal application feature is support for NTSC and PAL video signal generation. These standards require stable timing relationships between synchronization, blanking, active video, and related control signals. The ICS660GI is used where a board-level clock and timing reference is needed rather than a general-purpose microcontroller timer. Its dedicated video timing role can simplify clock distribution and reduce the timing burden placed on a system processor. ICS660GI is identified as a video generator IC with NTSC and PAL support, and it is also described as a digital video clock source. These descriptions reflect its role in digital video clock generation and conversion. The component is associated with clock rates commonly required in MPEG, NTSC, PAL, and HDTV equipment, making it relevant to legacy and specialized video systems where the correct standard and synchronization behavior are more important than a generic low-cost oscillator. The 16-TSSOP package is a surface-mount package with compact lead spacing suitable for modern board assembly. Because the manufacturer datasheet and complete pin-description table are not included in the available product references, engineers should verify pin assignments, voltage ratings, operating frequency, output configurations, and timing tolerances against the current Renesas datasheet before releasing a production design. This page focuses on the function and sourcing facts identified for the exact ICS660GI ordering code. This page combines the verified product description, NTSC/PAL and digital-video timing context, package information, sourcing guidance, and practical design notes. It is intended to help engineers determine whether ICS660GI fits a video timing requirement before requesting a quote for the exact 16-TSSOP device.

Запрос цены Контакты
ICS661GI - 73.728MHz Audio Clock Source | Renesas | TSSOP-16
ICS661GI

ICS661GI - 73.728MHz Audio Clock Source | Renesas | TSSOP-16

Renesas Electronics ICS661GI is a precision audio clock generator and clock synchronizer IC with a 73.728 MHz output, supplied in a 16-pin TSSOP package measuring 4.40 mm wide. The device generates synchronous audio sampling clocks derived from an MPEG stream and can also serve as a standalone clock source using a 27 MHz crystal. A clock generator is a timing IC that converts a reference input into one or more stable clock outputs. Clock generators and clock synchronizers form part of the broader clock and timing IC family, where they support digital audio, communications, data conversion, and embedded signal-processing systems. The ICS661GI is intended specifically for precision audio-clock generation, providing a defined output associated with common digital-audio sampling rates. Its principal documented characteristics include a 73.728 MHz clock output, support for a standalone 27 MHz crystal reference, and a compact 16-pin TSSOP package. The narrow 4.40 mm package width supports conventional surface-mount PCB assembly while reducing the footprint compared with larger clock packages. The manufacturer categorizes the component as a clock generator, clock synchronizer IC for precision audio applications. The ICS661 architecture supports two operating approaches. In MPEG-derived operation, it produces synchronous audio sampling-clock rates from an MPEG stream. In standalone operation, it uses a 27 MHz crystal as the timing reference. This flexibility allows the same device to be evaluated in systems where the upstream source is digital media data or where a local crystal-backed clock is preferred. Typical uses include digital audio equipment, MPEG audio processing chains, audio codecs and converters, consumer electronics, and clock-distribution subsystems requiring a dedicated audio-rate source. System designers should evaluate the device against the required audio sampling rate, reference architecture, output jitter, supply conditions, and acquisition format before finalizing the clock tree. Place the ICS661GI close to the clock-consuming circuit and observe the grounding and decoupling guidance in the Renesas ICS661 datasheet. The 16-pin TSSOP footprint requires a deliberate escape-routing pattern, and unused inputs should be connected according to the manufacturer’s recommended input states. Differential pair routing and controlled return paths are preferable when the output drives a sensitive converter or high-speed digital input. This product page consolidates the clock function, package details, application fit, replacement considerations, and implementation guidance. It also distinguishes documented electrical facts from parameters that require confirmation in the complete manufacturer datasheet, helping engineers plan sourcing and PCB design before committing to a production build.

Запрос цены Контакты
ICS663M - 120MHz PLL Clock Synthesizer | Renesas Electronics
ICS663M

ICS663M - 120MHz PLL Clock Synthesizer | Renesas Electronics

Renesas Electronics ICS663M is a single-circuit phase-locked-loop clock synthesizer with a maximum operating frequency of 120 MHz, a 1:1 input-to-output ratio, and CMOS clock output. The device is supplied in an 8-SOIC surface-mount package measuring 3.90 mm wide and is listed for operation from 3.13 V to 5.5 V. A phase-locked loop, or PLL, is a frequency-control building block that locks an internally generated or controlled clock to a reference signal. Within the clock and timing hierarchy, the ICS663M functions as a PLL building block combining a phase detector, charge pump, voltage-controlled oscillator, and output buffer. This allows an external timing loop to synthesize or synchronize a stable CMOS clock rather than relying only on a free-running oscillator. The verified product information identifies the ICS663M as a low-cost PLL intended for clock synthesis and synchronization. Its principal documented parameters include one PLL circuit, one clock input, one CMOS output, no differential input or output, a 1:1 input-to-output division ratio, and operation up to 120 MHz. The 8-SOIC package provides a compact surface-mount option for clock-generation and timing circuits. The PLL architecture makes external loop filtering an important part of the application circuit. External components can establish loop bandwidth, damping, and phase-error behavior, which influence jitter, acquisition time, and reference-clock rejection. Actual performance therefore depends on the external loop network, reference frequency, output loading, supply quality, and board layout rather than only on the nominal 120 MHz maximum. Typical applications include reference-clock multiplication, synchronization of communications equipment, generation of a derived system clock, and recovery or conditioning of a timing signal. The ICS663M is also suitable for industrial instrumentation, test equipment, and embedded systems that require a phase-locked CMOS clock but do not require a highly integrated programmable clock generator. Designers should provide stable supply and reference-clock connections, follow the manufacturer’s recommended loop-filter topology, and use short return paths for clock and ground. Because an 8-SOIC footprint is compact, trace geometry and capacitance control become important when maintaining signal integrity at higher clock rates. This page combines verified distributor and manufacturer-linked product information with practical PLL design guidance, transparent comparison data, and availability details. It distinguishes documented parameters from engineering values that still require confirmation from the Renesas datasheet before schematic release or production qualification.

Запрос цены Контакты
ICS663MI - PLL Clock Driver Building Block | Renesas | 8-SOIC
ICS663MI

ICS663MI - PLL Clock Driver Building Block | Renesas | 8-SOIC

Renesas ICS663MI is an integrated PLL building block packaged in an 8-pin SOIC, a surface-mount package measuring 3.90 mm wide. The component belongs to the clock and timing semiconductor family and is intended for clock-generation, clock-distribution, and frequency-synthesis systems. The verified product information identifies it as an IC PLL building block and lists the package as 8-SOIC. A PLL building block is a timing IC used within a phase-locked-loop architecture. Its function is to support a feedback-controlled oscillator whose output frequency can be related to a reference frequency. Clock-generation and PLL-based frequency synthesis are part of the broader clock and timing hierarchy, which also includes clock buffers, clock drivers, dividers, oscillators, and frequency multipliers. These devices establish the timing reference used by processors, communications equipment, data converters, and digital control systems. The defining physical characteristic of the ICS663MI is its 8-SOIC package with a stated width of 0.154 inch, or 3.90 mm. Surface mounting supports compact PCB construction and automated assembly. Renesas Electronics America Inc is identified as the manufacturer associated with the listed MPN, while legacy catalog records associate the part with Integrated Device Technology, Inc. The MI package suffix is treated as the manufacturer ordering code shown in the available listings. The ICS663MI belongs to a timing-device category where exact operating limits must be established from the manufacturer datasheet before implementation. Input and output frequency ranges, supply voltage, operating temperature, phase noise, jitter, output configuration, and input-to-output ratio are not stated in the available product records. Those electrical parameters must be checked in the datasheet rather than inferred from the PLL building-block description. The package dimensions are known, but land-pattern and solder-reflow details also require manufacturer guidance. Typical design roles for this device family include clock synthesis, reference distribution, communications timing, digital-system clock trees, and frequency conversion. In each case, the PLL is used to create or organize a stable timing relationship between a reference and an output clock. Whether the ICS663MI can support a particular channel rate, loop filter, output standard, or synchronization scheme depends on its detailed electrical characteristics and recommended application configuration. Before layout, check the complete pin description and recommended decoupling network in the manufacturer datasheet. Keep the clock and feedback routing compact and controlled, and account for jitter and noise budget rather than treating the PLL solely as a frequency multiplier. PCB power and ground distribution, loop-filter component placement, and output-load compatibility are central to achieving predictable clock performance. This product page combines the verified package and device-class information with practical selection guidance, comparison fields, sourcing questions, and design considerations. It separates confirmed facts from parameters that require datasheet confirmation, helping engineers determine whether the ICS663MI belongs in a clock-timing design before requesting a quote or beginning layout.

Запрос цены Контакты
ICS663MLF - 120MHz PLL Clock Synthesizer | Renesas
ICS663MLF

ICS663MLF - 120MHz PLL Clock Synthesizer | Renesas

The Renesas Electronics ICS663MLF is a low-cost phase-locked-loop clock synthesizer designed for clock synthesis and synchronization, with operation up to 120 MHz and operation from a 3.3 V supply in an 8-pin SOIC package. The integrated circuit combines a phase detector, charge pump, voltage-controlled oscillator, and output buffer in one compact device, providing the core functions required for generating a clock from an external reference. A phase-locked loop, or PLL, is a feedback-control circuit that locks an internally generated oscillator to an external reference signal. In the clock-and-timing hierarchy, a PLL clock synthesizer belongs to the broader clock generator and frequency-synthesizer family. It is used when a system needs a stable, programmable clock derived from a reference rather than a free-running oscillator. The ICS663MLF supports synchronization applications in which phase, frequency, and output stability determine downstream timing quality. The principal device characteristics include a maximum clock frequency of 120 MHz, a 3.3 V operating supply identified in the product listing, and an 8-SOIC package. The SOIC package provides a standard surface-mount form factor suitable for conventional PCB assembly. The MLF ordering suffix is associated with tube packaging, allowing the same device to be ordered in a production-friendly bulk format. The 8-pin arrangement also reduces board area compared with larger clock-generator packages while retaining access to the PLL’s principal external connections. Technically, the phase detector compares the reference and feedback signals, while the charge pump converts the detected phase error into a control voltage. The voltage-controlled oscillator uses that control voltage to generate an output whose frequency is divided and fed back to complete the locking loop. External reference and VCO dividers expand the range of input and output frequencies that can be synthesized. The manufacturer description specifically notes that divider implementations such as the ICS674-01 can be used to configure the ICS663 for a broad range of input frequencies. Typical uses include clock generation for digital logic, synchronization of multiple circuit domains, frequency synthesis in communications equipment, and distributed clocking in industrial or embedded systems. A design should preserve the loop-filter layout and provide clean reference and feedback signals because phase jitter and reference noise propagate directly to the generated clock. Component selection also requires checking the exact output frequency range, reference-input limits, supply tolerance, and external divider values against the manufacturer’s operating table. The key implementation consideration is to use the PLL in its intended reference-and-feedback topology rather than treating it as a free-running oscillator. Place the loop-filter components near the relevant device pins, route the feedback path away from high-current switching nodes, and use a low-jitter reference clock when precise downstream timing is required. Component values and loop bandwidth should follow the manufacturer’s application guidance. This product page combines the device architecture, package information, sourcing guidance, drop-in alternatives, application context, and practical PCB recommendations in one engineering-focused reference. The result helps designers evaluate the ICS663MLF for synchronization and frequency-synthesis designs while identifying where a different PLL family member or a new PCB design is required.

Запрос цены Контакты