РЧ и беспроводная связь
Подкатегории
Товары (695)
LBWA0ZZ2HL - Sub-1GHz Wi-Fi HaLow 802.11ah Module | Murata
The Murata LBWA0ZZ2HL (Type 2HL) is a long-range Sub-1GHz Wi-Fi HaLow system-on-module based on the NEWRACOM NRC7394 chipset, supporting IEEE 802.11ah SISO operation from 750 MHz to 950 MHz with data rates up to 15 Mbps, output power up to 17 dBm, and line-of-sight communication range up to 1 km from a 2.7 V to 3.6 V supply. A Wi-Fi HaLow module is a wireless connectivity module that implements the IEEE 802.11ah Sub-1 GHz (S1G) amendment of the Wi-Fi standard. Unlike conventional 2.4 GHz and 5 GHz Wi-Fi, HaLow trades peak bandwidth for substantially greater range, better wall-penetration, and lower power consumption, making it a member of the low-power wide-area (LPWAN) connectivity family alongside LoRa and NB-IoT, while retaining native IP networking and Wi-Fi security. Key features of the LBWA0ZZ2HL include operation across key regional Sub-1 GHz bands (the HL variant covers 750-950 MHz bands for regions such as Europe, Japan and others, while the companion HK variant targets 902-928 MHz), ultra-low power consumption for battery-powered IoT endpoints, and data rates up to 15 Mbps - far higher than typical LPWAN technologies. The integrated NRC7394 SoC handles MAC, baseband and RF in a single chipset, simplifying host integration over SDIO/SPI interfaces. Technically, the module implements 802.11ah SISO with standard Wi-Fi security, allowing direct IP connectivity to HaLow access points. Murata, as a leading module manufacturer, provides certification-ready design that reduces end-product regulatory burden across key regions. According to Murata product literature, the Type 2HL is designed specifically for the connectivity needs of Internet of Things (IoT) devices. Typical applications include smart utility metering, industrial sensors, building automation, smart city infrastructure, and agricultural monitoring - all scenarios requiring multi-hundred-meter to kilometer-scale links with years of battery life. Designers should verify regional RF regulatory certification (the HL and HK variants cover different frequency bands) and confirm antenna matching and supply filtering per the manufacturer datasheet. This page synthesizes verified distributor and manufacturer data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
LC29D - Dual-Band GNSS Module with RTK/DR | Quectel
The Quectel LC29D is a concurrent multi-constellation GNSS receiver module operating on dual GNSS bands (L1+L5), integrating a 6-axis inertial sensor fused with RTK and dead-reckoning algorithms to deliver sub-meter positioning accuracy in open-sky environments. Housed in a compact 12.2 mm x 16.0 mm x 2.4 mm LCC package weighing 0.9 g, the LC29D supports concurrent tracking of GPS, GLONASS, IRNSS, BeiDou, Galileo and QZSS constellations, with the BCM47758 chipset enabling high-precision positioning. A GNSS (Global Navigation Satellite System) module is a satellite-receiving electronic component that computes position, velocity and time (PVT) solutions by trilaterating ranging signals from multiple satellite constellations. The technology hierarchy spans: GNSS module -> satellite receiver -> positioning IC -> RF receiver -> wireless semiconductor. Modern multi-band GNSS modules like the LC29D differ from single-band L1-only receivers by simultaneously tracking the L5 band, which provides higher chipping rate, better multipath mitigation, and improved robustness against ionospheric delay, directly translating into centimeter-to-decimeter level accuracy when paired with RTK corrections. Key features include sub-meter positioning accuracy under open sky, concurrent multi-constellation reception across six satellite systems, integrated 6-axis IMU for sensor-fusion dead-reckoning, and RTK support for centimeter-level corrections. The module supports both LCC and LGA package variants and operates over an extended industrial temperature range, making it suitable for automotive and industrial tracking. Technically, the LC29D uses Broadcom's BCM47758 dual-band GNSS engine, which can output RTCM 3.x correction data and supports PPP (Precise Point Positioning). The integrated IMU enables dead-reckoning to maintain accurate positioning during GNSS outages in tunnels, urban canyons, and parking structures, while RTK support achieves centimeter-level accuracy when correction streams are available. Typical applications include vehicle tracking and fleet management, shared mobility (e-scooter, e-bike, ride-share), asset tracking, precision agriculture, and ADAS platforms. The module's RTK capability makes it well-suited for drones, autonomous robotics, and surveying equipment requiring centimeter-level accuracy. When designing with the LC29D, ensure the host processor can provide RTCM correction data over UART or IP connection for full RTK operation. Route the RF input trace with controlled impedance and place the antenna as far from noise-generating circuitry as possible to maximize CN0. Use the recommended L1+L5 stacked patch or active multi-band antenna. This page synthesizes verified distributor pricing, parametric same-family LC29D variants, and practical RF layout design notes that go beyond the Quectel datasheet, giving engineers a single, citation-ready reference for product selection.
LC79DAEK - LC79D GNSS Evaluation Board Kit | Quectel
The Quectel LC79DAEK is an evaluation board kit (EVB) for the Quectel LC79D multi-constellation GNSS positioning module, designed to accelerate hardware integration and firmware bring-up. The kit exposes the LC79D module's L1+L5 dual-band GNSS receiver, antenna interface, USB/UART communication ports, and power input on a ready-to-use PCB that hosts an integrated LNA and SAW filter chain. A GNSS (Global Navigation Satellite System) module is a radio receiver that simultaneously tracks signals from multiple satellite constellations (GPS, GLONASS, Galileo, BeiDou, QZSS, NAVS) to compute position, velocity and time (PVT). GNSS modules belong to the broader RF receiver category and sit in the hierarchy: GNSS module -> satellite navigation receiver -> RF receiver -> wireless transceiver -> semiconductor. They typically integrate an RF front-end, baseband processor, and a positioning engine that outputs NMEA-0183 or proprietary binary protocols over UART/USB. Key features of the LC79DAEK include support for GPS L1+L5, GLONASS L1, Galileo E1+E5a, BeiDou B1I+B1C+B2a, QZSS L1+L5 and SBAS, achieving centimeter-level convergence with RTK corrections. The EVB integrates a high-gain LNA, SAW filter for out-of-band rejection, active antenna power supply, and an on-board USB-to-UART bridge for direct PC connection. Operating voltage spans 3.0 V to 5.5 V, and the board exposes standard 2.54 mm headers for all I/O. Typical applications include autonomous-robot localization, asset-tracking telematics, precision-agriculture GNSS receivers, surveying and mapping devices, and unmanned-aerial-vehicle (UAV) navigation. The dual-band L1+L5 architecture delivers robust multipath rejection in urban canyon environments, which is essential for ADAS and lane-level mapping. Compared to single-band L1-only GNSS modules, the LC79D's L5 reception improves position accuracy from ~2.5 m to ~0.5 m in open-sky conditions. When designing with the LC79DAEK, ensure the active antenna bias-tee supplies 3.0 V to 5.5 V at the LNA feed, and that the USB-to-UART bridge is configured for 115200 bps 8N1 by default. Place the EVB away from switching power converters and large digital buses to minimize GNSS in-band interference.
LC79DBEK - Quectel LC79D GNSS Evaluation Board Kit | EVB
The Quectel LC79DBEK is an evaluation board (EVB) kit for the Quectel LC79D multi-GNSS positioning module, supplied in a developer-ready kit format that exposes all functional pins, an on-board active antenna interface, USB/UART bridges, and reference power rails. The kit is intended to accelerate prototyping of LC79D-based designs that require concurrent GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS reception, with positioning performance validated per AIS-140. The LC79D module at the heart of the kit is a multi-constellation GNSS receiver module that integrates a 28nm GNSS chipset, on-board LNAs and SAW filters, and an advanced low-power management solution. A GNSS receiver module is a satellite-radio receiver that calculates its own 3-D position, velocity and time by trilaterating ranging signals from multiple Medium Earth Orbit (MEO) and Geosynchronous (GEO) satellites; in the broader taxonomy, GNSS modules sit under satellite-positioning receivers, then radio-frequency receivers, then wireless modules, then electronic modules. Quectel's LC79D family targets fleet telematics, vehicle tracking, asset monitoring and AIS-140-compliant in-vehicle systems. Key features of the development kit include direct access to UART, I2C and PPS interfaces, integrated SMA connector for active GNSS antenna, USB-to-UART bridge for direct PC connection, status LEDs for power and 1PPS, and a regulated 3.3V reference supply. The on-module LNAs and SAW filters harden acquisition against weak-signal and jamming-rich environments, which is critical for aftermarket vehicle installations and metal-shielded telematics enclosures. The LC79D module uses 28nm CMOS process technology, enabling the low power consumption that battery-powered asset trackers require. Multi-constellation concurrent operation shortens time-to-first-fix (TTFF) and improves position accuracy in urban canyons, where single-constellation receivers suffer frequent dropouts. The module is AIS-140 compliant, an Indian automotive telematics standard that mandates specific update rates, accuracy and security features for commercial vehicles. Typical applications include AIS-140-compliant vehicle tracking units, fleet management telematics, e-call and ERA-GLONASS-style emergency call systems, two-wheeler telematics boxes, asset tracking and cold-chain monitoring, and shared-mobility scooter trackers. The evaluation kit accelerates bench validation before committing to a custom LC79D carrier PCB layout. When designing with this kit, always use the included active LNA antenna in the SMA port for first-time verification; passive antennas will yield degraded CN0 figures and longer TTFF. Ensure host firmware drives the LC79D's on/off and reset pins per the LC79D GNSS specification rather than relying solely on supply-rail cycling, since the module's backup-domain logic requires a controlled shutdown sequence to preserve ephemeris.
LE910C1-EU - LTE Cat.1 10/5 Mbps Module | Telit Cinterion
The Telit Cinterion LE910C1-EU is an LTE Cat.1 cellular IoT transceiver module delivering 10 Mbps downlink and 5 Mbps uplink data rates, compliant with 3GPP Release 10, housed in a compact LGA (land grid array) surface-mount form factor with an optional quad-constellation GNSS receiver supporting GPS, GLONASS, Galileo, BeiDou, and QZSS. An LTE Cat.1 module is a category of cellular RF transceiver module that provides full-duplex LTE connectivity at modest data rates, sitting within the broader hierarchy of cellular modems: M2M module -> LTE transceiver module -> wireless communication IC. Cat.1 is widely adopted as the migration path from 2G/3G for machine-to-machine devices because it uses the existing LTE network infrastructure without the complexity of Cat-M1 or NB-IoT, while still supporting voice and data. Key features of the LE910C1-EU include the 10/5 Mbps throughput profile, 3GPP Rel 10 compliance with Rel 12-ready MTC platform features, integrated TCP/IP and UDP/IP protocol stacks, and peripheral connectivity via USB 2.0 HS, UART, and user-definable GPIOs. These characteristics make it well suited to devices that need dependable, always-on wide-area connectivity without a host-side network stack. The module is part of Telit's flagship xE910 family, whose design-once, use-anywhere philosophy allows LE910C1 variants to serve as pin-to-pin compatible replacements within the same LGA footprint for devices based on earlier 2G, 3G, and LTE family members. The ThreadX RTOS-based firmware platform simplifies application integration, and the LE910Cx family is also offered in Linux-based SKUs for more demanding gateway applications. Typical applications include smart metering, asset tracking and fleet telematics, industrial gateways and routers, security and alarm panels, and connected point-of-sale terminals, where European-band LTE coverage and low-power, long-lifecycle operation are priorities. When designing with the LE910C1-EU, budget for a proper RF layout: the antenna is not included, so PCB antenna feed matching, keep-out zones, and supply decoupling follow the Telit LE910C1 Series hardware user's manual guidance for the LGA footprint. This page synthesizes distributor pricing and availability, drop-in alternatives within the xE910 family, and practical design guidance not consolidated in the manufacturer datasheet.
LM048 - Class 1 Bluetooth RS232 Serial Adapter 100m | LM Technologies
The LM Technologies LM048 is a Class 1 Bluetooth® Serial Adapter (RS232) that provides a secure and reliable wireless link replacing legacy RS232 cables between DTE master devices and DCE peripherals such as printers, data loggers, and digital signalling equipment. Housed in a compact plastic enclosure and billed by the manufacturer as the world's smallest Bluetooth® serial adapter, the LM048 delivers up to 100 m line-of-sight range using an onboard antenna while operating from either RS232 Pin 9 (4 V to 13 V) or a Mini-USB supply. A Bluetooth® serial adapter is a self-contained cable-replacement module that bridges a wired RS232 UART interface to a Bluetooth SPP/Serial Port Profile link. Inside the adapter, a Bluetooth baseband IC handles the v2.0/v2.1 + EDR radio (Class 1, up to +18 dBm Tx) and the SPP stack; an RS232 transceiver converts UART logic levels to the ±5 V to ±15 V signaling required by RS232 peripherals. Pairing is transparent to the host: RS232 control lines DTR, DSR, RTS, and CTS are replicated end-to-end over the wireless link via the LM048's patented firmware, allowing legacy Windows/Linux serial applications to operate without modification. The headline specifications include Bluetooth® v2.0/v2.1 with EDR (3 Mbps nominal), Class 1 output power (approximately +18 dBm Tx), -86 dBm Rx sensitivity, and adaptive frequency hopping across the 2.402 GHz to 2.480 GHz ISM band. The adapter accepts RS232-standard baud rates (typical coverage 1.2 kbps up to 460 kbps per public listings) and operates from -20 °C to +75 °C. Power can be sourced from RS232 Pin 9 (4 V to 13 V) or from a Mini-USB port, and the plastic housing exposes a slide switch plus LEDs for status and pairing feedback. A pair of LM048 adapters using their unique hardware and firmware combination can act as a transparent serial cable replacement, removing the need for driver changes on the host. The unit carries relevant Bluetooth SIG certifications and CE/FCC compliance marks as listed in the manufacturer datasheet. Typical applications include industrial RS232 cable replacement, factory-floor data loggers, point-of-sale printers, bar-code scanners, and remote telemetry units. Designers typically route 5 V to 9 V to Pin 9 and connect TX/RX directly to the host UART bridge. When designing a drop-in cable-replacement node, choose between powering from the RS232 Pin 9 line or USB Mini; a pair of LM048 units gives a true transparent null-modem replacement. Note that throughput tops out near the 460 kbps baud ceiling and the radio is limited to Bluetooth v2.0/v2.1 + EDR, not BLE 5.x. This page synthesizes distributor pricing for the LM048, same-brand LM Technologies variants (LM048 v2, LM058, LM400, LM072) and practical drop-in guidance not collected in the manufacturer datasheet.
LM068 - Bluetooth 5.0 Dual Mode RS232 Serial Adapter | LM Technologies
The LM Technologies LM068 is a Bluetooth 5.0 Dual Mode RS232 Serial Adapter packaged as a standalone module with an embedded Bluetooth 5.0 stack. It operates with a supply voltage of 4V to 12V, supports data rates up to 3 Mbps, and is designed to replace wired RS232 cables between a master (DTE) device and slave (DCE) devices such as printers, data loggers, and digital signalling instruments. The adapter runs on an internal microcontroller paired with an 8 Mbit flash memory for application storage, enabling firmware configurability through the LM149v2 host utility. A Bluetooth serial adapter is a self-contained wireless bridge that replaces a legacy UART/RS232 cable with a Bluetooth link. In the broader taxonomy it sits under wireless modules -> RF modules -> RF transceivers -> communication ICs -> semiconductors. The adapter exposes a standard DB9 RS232 connector on the DTE side and converts the UART traffic to a Bluetooth 5.0 link on the slave side. Dual Mode means it can connect to both Bluetooth Classic (BR/EDR) and Bluetooth Low Energy (BLE) hosts, providing flexibility for legacy SPP-style serial replacement as well as modern low-power BLE devices. Key features of the LM068 include Bluetooth 5.0 dual mode support (Classic + BLE), a configurable firmware via the LM149v2 utility, configurable baud rate, data bits, parity and flow control, support for SPP (Serial Port Profile) over Classic, and a small physical footprint of 46.3 mm x 34 mm x 16 mm. The power input is versatile: USB-Mini, DB9, or an external AC adaptor. Settings persist across power cycles, eliminating the need to reconfigure on every boot. The adapter also supports auto-connect and discoverable/non-discoverable modes, simplifying integration in industrial machines where operators frequently reconnect cables between cycles. The internal architecture pairs a microcontroller with a Bluetooth 5.0 module, with the MCU handling profile bridging and configuration. Because the stack is embedded, the host CPU never sees raw radio activity; it only exchanges UART bytes, simplifying software integration on systems that cannot host a Bluetooth stack (older PLCs, microcontrollers without BLE, lab instruments). Typical applications include replacing RS232 cables in industrial machinery, wireless connection to data loggers and printers, point-to-point serial tunneling for embedded devices, and office equipment that needs occasional wireless configuration access without permanent cabling. The wide 4-12V input range lets it draw power from the host's existing DC rail or an AC wall adaptor. When selecting the LM068, ensure that the target host device has an RS232 DB9 port, or plan for a USB-to-RS232 converter. The adapter cannot exceed approximately 3 Mbps aggregate throughput, which is faster than classic RS232 (115.2 kbps typical) but considerably slower than modern Wi-Fi or Ethernet alternatives. Pick this part when you need a deterministic cable replacement with minimal configuration, not for high-bandwidth streaming. This page synthesizes distributor availability, configuration guidance and drop-in alternative notes that complement the manufacturer's datasheet. Compared to bare Bluetooth modules the LM068 is a finished adapter with connectors and firmware, so its alternatives must also be finished serial adapters in the same form factor, not bare radio modules.
LM509 - Bluetooth 5.4 Dual Mode Class 1 USB Adapter | LM Technologies
The LM Technologies LM509 is a Bluetooth 5.4 dual mode Class 1 USB adapter that provides plug-and-play wireless connectivity for host computers. Housed in an ultra-small form-factor USB dongle, it supports Bluetooth 2.x, 4.x, and 5.x profiles, enabling communication with iOS, Android, printers, keyboards, speakers, and headphones using both Bluetooth Classic (BR/EDR) and Bluetooth Low Energy (LE) radio paths. According to the LM Technologies LM509 datasheet, the adapter is compatible with Linux as well as Windows 10 through Windows 11 host platforms. Background knowledge: Bluetooth dual mode adapters are external peripherals that aggregate a Bluetooth Classic radio (for legacy audio, HID, and SPP profiles) and a Bluetooth Low Energy radio (for modern IoT, beacon, and low-power sensor profiles) onto a single USB endpoint. They are classified as Class 1 when their transmit output power reaches up to +20 dBm and supports an indoor range of roughly 30 meters, which extends coverage well beyond the Class 2 limit (~10 m) used in most laptops. Bluetooth 5.4 itself is a core specification released by the Bluetooth SIG that adds PAwR (Periodic Advertising with Responses), LE-Game-Controller profile support, and encrypted advertisement data, in addition to the 2x throughput and 4x range improvements of Bluetooth 5.0. Key specifications of the LM509 include its dual-mode Bluetooth 5.4 radio, Class 1 transmit power, USB Type-A plug-and-play interface, and OS coverage from Windows 10/11 to mainline Linux kernels. The adapter exposes dual radio paths (BR/EDR + LE) so a host can pair both legacy audio peripherals and modern BLE sensors simultaneously. Bluetooth 5.4 features supported include advertising extensions, periodic advertising with responses, and LE audio metadata. The product is supplied as a finished, end-user-ready module, not a bare silicon IC. Its architecture centers on a Bluetooth 5.4 SoC paired with a Class 1 RF front-end, USB 2.0 device controller, and integrated PCB antenna or external RF chain depending on the SKU variant. The completed enclosure is tested by the manufacturer for EMC and RF conformance, which removes RF tuning work from the integrator. Typical use cases include adding wireless audio and HID connectivity to industrial PCs, providing BLE data uplink for IoT gateways, and acting as a development dongle during Bluetooth firmware bring-up. For successful deployment, verify that the host OS supplies USB HID/Bluetooth enumeration support and that Class 1 radio emissions comply with the regional ETSI/FCC/IC radio regulations at the installation site. The USB bus supplies the device with 5 V at roughly 100 mA, so no external power is required.
LM800 - 700/800/900/1850 MHz Spring Coil Whip Antenna | Pulse Electronics
The Pulse Electronics LM800 is a high-performance, encapsulated spring-whip antenna tuned for quad-band cellular and ISM operation in the 700/800/900/1850 MHz bands. Housed in a flexible over-molded chrome housing with an SMA or equivalent RF connector at the base, the LM800 delivers a typical 3.4 dBi peak gain at 806-960 MHz with an integrated matched network that removes the need for external tuning components. The non-pigtail direct-mount form factor simplifies mechanical integration into enclosures and provides 50 ohm nominal input impedance for direct connection to cellular modems, LTE/Cat-M1/NB-IoT transceivers, and multi-band radio modules. A cellular antenna (also called a quad-band cellular whip, multiband whip antenna, or RF antenna) is a passive radiating element designed to convert conducted RF signals on a transmission line into electromagnetic waves over the air, and vice versa. As a sub-category of RF antennas, cellular multiband antennas sit within the broader taxonomy: RF antenna -> antenna -> passive RF component -> electronic component. They are commonly integrated into fixed wireless terminals, asset tracking hardware, industrial gateways, and telematics control units that must operate across the fragmented global LTE spectrum. Key features of the LM800 include broadband VSWR performance below 2:1 across the 700-2200 MHz cellular bands, a 50 ohm nominal impedance that matches virtually every modern cellular module, omnidirectional radiation pattern for non-line-of-sight deployments, and a ruggedized UV-stable housing suited for indoor and sheltered outdoor enclosures. The spring section at the base flexes under impact, reducing the risk of connector damage in mobile or vibration-prone installations. Operating temperature is rated -40C to +85C for industrial deployments. The architecture is a quarter-wave monopole over a finite ground plane, with a helical compression spring forming the lower radiating section and a straight whip forming the upper section. This two-piece construction simultaneously broadens the impedance bandwidth and increases the effective electrical length without raising the mechanical profile. The integrated matching network consists of a series LC topology on the feed, which flattens the VSWR response across the four target bands rather than relying on a single resonant peak. Typical applications include fixed wireless LTE routers, cellular IoT gateways (LTE-M and NB-IoT), fleet telematics units, industrial M2M terminals, and remote asset trackers using cellular backhaul. In each of these use cases the LM800's multiband coverage avoids the cost of stocking multiple regional SKUs. When integrating the LM800, mount it on a ground plane of at least 100x100 mm to achieve datasheet gain figures; performance degrades on smaller ground planes. Route the antenna away from DC-DC converters and noisy digital buses to preserve radiated sensitivity.
LM808 - 433 Mbps Wi-Fi 5 USB Adapter | LM Technologies
The LM Technologies LM808 is a 433.3 Mbps Wi-Fi 5 (802.11ac) USB 2.0 wireless client adapter designed for users requiring high-performance wireless connectivity on desktop and embedded hosts. Built around a Realtek 1T1R (one transmit, one receive) radio chipset, the LM808 fully supports all 802.11 bands including IEEE 802.11ac Draft 2.0 and the legacy 802.11 a/b/g/n specifications, while remaining backward compatible on 802.11n networks. Housed in a compact USB dongle form factor, the LM808 exposes the full 433 Mbps physical-layer rate available on a single spatial stream under 802.11ac, and is paired with a USB 2.0 device interface that draws bus power directly from the host. A Wi-Fi USB adapter is a peripheral module that bridges a host computer's USB bus to a wireless local area network (WLAN). The adapter's internal radio and baseband translate 802.11ac/a/b/g/n OFDM frames into USB packets, allowing any operating system with a generic WLAN driver stack to treat the device as a virtual Ethernet port. Within the wireless-networking taxonomy, the LM808 sits below embedded SiP modules and above raw chip-down radio designs, giving product developers a pre-certified, drop-in connectivity solution without needing to manage antenna matching or RF regulatory compliance themselves. Key features include dual-band 2.4 GHz and 5 GHz operation, Wi-Fi Direct peer-to-peer support for ad-hoc PAN-style networking, 1T1R MIMO, and full USB 2.0 high-speed bus compatibility. The adapter relies on OFDM modulation across the supported 802.11 bands and uses the host's WLAN driver stack to negotiate rates up to 433.3 Mbps. The Realtek-based design has been validated across Windows, Linux, and macOS reference stacks supplied by LM Technologies, removing the need for proprietary driver development. Typical applications include upgrading legacy desktop PCs to dual-band Wi-Fi 5, adding wireless connectivity to industrial PCs and point-of-sale terminals, embedded Linux gateways, retro gaming consoles, and digital signage players. The compact USB-A dongle footprint also makes the LM808 a convenient wireless client for developer boards that lack an on-board Wi-Fi radio, where it can be paired with a Linux host running NetworkManager or wpa_supplicant. When designing with the LM808, verify host-side driver availability for the target operating system and confirm the antenna's radiation pattern is appropriate for the enclosure. USB 2.0 bus-power limits must be observed when designing hubs that will host multiple LM808 adapters in parallel. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a single reference for evaluating the LM808 against competing USB Wi-Fi 5 adapters.
LM813 - WiFi 802.11ac + BT 4.2 Combi Module | LM Technologies
The LM Technologies LM813 is a combination WiFi 802.11ac/a/b/g/n plus dual-mode Bluetooth v2.1/v3.0/v4.2 module delivered as a surface-mount device with an IPEX antenna connector. The module supports WiFi data rates to 433 Mbps and Bluetooth EDR to 2 Mbps (HS mode to 3 Mbps), exposing USB plus GPIO terminals for coexistence signaling in a single compact RF module footprint. A WiFi + Bluetooth combo module is a System-in-Package (SiP) or module-level integration of two radio subsystems (WiFi IEEE 802.11 family and Bluetooth) on a shared PCB, allowing a host processor to add wireless connectivity without designing RF matching networks or managing complex coexistence arbitration in firmware. Combo modules fall within the broader category of RF modules > wireless modules in the connectivity hierarchy. They are commonly deployed when BOM simplification, certified radio performance, and reduced time-to-market outweigh the need for lowest unit cost at scale. Key features of the LM813 include dual-band 2.4 GHz and 5 GHz WiFi operation under the IEEE 802.11ac/a/b/g/n standard family, dual-mode Bluetooth (Classic BR/EDR plus Bluetooth 4.2 LE) for backwards compatibility with legacy audio and data accessories, and an integrated coexistence interface exposed through GPIO pins for arbitration with co-located radios. The module carries an external IPEX/MHF antenna receptacle, allowing antenna selection to be tuned for the end application. The LM813 is built around a combination chipset that implements the 802.11ac MAC/PHY and Bluetooth baseband on a single die. WiFi throughput of 433 Mbps is delivered over a single spatial stream (1x1 SISO) using 802.11ac's mandatory MCS9 modulation, while Bluetooth uses an EDR-capable radio supporting 2 Mbps (HS mode 3 Mbps). The architecture offloads coexistence, channel access, and link-layer management from the host, leaving the host application processor responsible for higher-level networking (TCP/IP, BLE GATT services). Typical applications for the LM813 include industrial IoT edge gateways that need both WiFi infrastructure connectivity and Bluetooth for local provisioning or sensor beacons, point-of-sale (POS) terminals that accept Bluetooth card readers or barcode scanners while joining the store WiFi, and embedded HMI panels requiring over-the-air firmware updates. The dual-band capability also suits consumer audio docks that stream WiFi while maintaining a Bluetooth fallback path. When designing with the LM813, engineers should review the host interface (USB) pin mapping and supply the module from a clean 3.3 V rail with adequate decoupling. Antenna placement and ground keep-out around the IPEX feed line directly affect radiated performance and regulatory compliance. This page synthesizes distributor references, host-interface guidance, and verified parametric data not consolidated in the LM Technologies datasheet.
LM816 - 150Mbps WiFi 4 USB Nano Adapter | LM Technologies
The LM Technologies LM816 is a WiFi 4 (802.11 b/g/n) USB Nano wireless adapter delivering up to 150 Mbps PHY rate, built around a Realtek RTL8188EUS chipset and housed in a compact USB-A dongle form factor. Designed for low-power 5V operation via the USB bus, it supports both ad-hoc and infrastructure mode network architectures and is fully compliant with IEEE 802.11n, b, g, e and i standards including 802.11e QoS and 802.11i security extensions. The integrated chip antenna (IC-ANT) keeps the BOM minimal, making the LM816 well suited to space-constrained host platforms such as single-board computers, industrial gateways, and embedded Linux/Windows devices. A Wi-Fi 4 (802.11n) USB adapter is a peripheral that converts a wired USB host port into a wireless network client operating in the 2.4 GHz ISM band, providing 1x1 SISO throughput up to 150 Mbps and supporting legacy 802.11b/g fallback. In the broader hierarchy, the LM816 sits under wireless LAN adapters -> networking peripherals -> computer interfaces, and uses a single spatial stream with 20 MHz channels and 40 MHz HT capability. This product class is widely adopted for legacy Wi-Fi connectivity on embedded systems where cost, footprint, and driver maturity matter more than the multi-gigabit throughput of newer Wi-Fi 6/6E modules. Key features include hardware-based 64/128-bit WEP, WPA, and WPA2 encryption, soft-AP / Wi-Fi Direct capability, and driver support for Windows, Linux, and macOS hosts. The adapter enumerates as a USB 2.0 high-speed device and uses the standard RTL8188EUS driver tree maintained by Realtek and the Linux community. An internal printed chip antenna (AO/IC-ANT) eliminates the need for an external antenna while preserving the link budget required for typical indoor ranges. The LM816 references the Realtek RTL8188EUS single-chip 802.11n controller, which integrates the MAC, baseband, RF transceiver, and PA on a single die, requiring only an external crystal, EEPROM, and antenna matching network. The 1T1R radio chain, combined with Short GI and MCS7 modulation, enables the headline 150 Mbps PHY rate while staying within USB 2.0 bus bandwidth. This architecture explains the module's low power consumption and small footprint compared to discrete solutions. Typical applications include retrocomputing and embedded Linux SBCs (Raspberry Pi, Toradex, BeagleBone), industrial HMI terminals, point-of-sale systems, digital signage media players, and low-cost retrofit wireless upgrades for older desktops or laptops. The LM816 is also used as a quick evaluation reference for engineers validating 2.4 GHz Wi-Fi link behavior in prototype designs. When integrating the LM816, ensure the host platform provides a USB 2.0 high-speed port with sufficient bus power (typically 500 mA @ 5V). RF performance is sensitive to USB cable length and chassis shielding; for chassis-mounted applications, route the dongle externally to avoid degrading antenna patterns. Verified driver compatibility with the host OS should be confirmed before deployment in production. This page synthesizes distributor pricing, drop-in adapter alternatives, and application notes not found in the manufacturer datasheet, helping engineers select the right Wi-Fi adapter for embedded and industrial deployments.
LM816-USB - 150Mbps Wi-Fi 4 USB Nano Adapter | LM Technologies
The LM Technologies LM816-USB is a Wi-Fi 4 (802.11b/g/n) USB Nano Adapter that delivers up to 150 Mbps data transfer in a compact USB dongle form factor. It is built around a Realtek 8188EUS chipset and is fully compliant with IEEE 802.11 b, g, and n standards, including 802.11e and 802.11i features. The adapter operates in the 2.4 GHz ISM band and supports both ad-hoc and infrastructure network architectures. A USB Wi-Fi adapter (also called a WLAN dongle) is a peripheral that adds wireless networking capability to a host device via the USB bus. It encapsulates the radio, baseband, MAC, and host interface into a self-contained module, allowing embedded systems, single-board computers, and PCs to join Wi-Fi networks without integrating a chipset directly on the motherboard. Within the wireless connectivity hierarchy, USB Wi-Fi adapters sit alongside PCIe Wi-Fi cards, SDIO Wi-Fi modules, and solder-down M.2 WLAN cards as one of the easiest ways to add Wi-Fi to a design. Key features of the LM816-USB include a 1T1R (single transmit / single receive) radio chain, 20 MHz channel bandwidth, and 64/128-bit WEP, WPA, and WPA2 encryption. The adapter is powered directly from the USB 5 V rail, eliminating the need for an external power supply. A reference designator on the product page identifies it as "ADT, 802.11n, USB, 150Mbps, 5V Realtek 8188EUS, Nano". The adapter is pre-certified, which shortens time-to-market for OEMs that would otherwise need to certify a discrete radio. The LM816-USB uses a Realtek RTL8188EUS single-chip 802.11n controller, which integrates the 2.4 GHz radio, MAC, and baseband. The dongle presents a USB 2.0 device to the host and exposes a Wi-Fi station through the standard WLAN NDIS / nl80211 interface on Linux or the Wi-Fi NDIS miniport on Windows. This chipset family is broadly supported by mainline Linux kernels, simplifying driver integration on embedded Linux hosts (note: Toradex lists the LM816 as HCI for Windows CE; embedded Linux support depends on the kernel version in use). Typical applications include adding Wi-Fi to Raspberry Pi or other SBC projects, industrial control panels requiring wireless network access, point-of-sale terminals needing network connectivity, retro computing projects that need network access on legacy hardware, and embedded Linux development boards that lack an on-board Wi-Fi chipset. Its 150 Mbps link rate is sufficient for typical browser, email, and IoT telemetry workloads. When designing with this adapter, consider that the USB connector orientation and dongle clearance must be planned at the chassis level. Because the radio radiates through the dongle body, the USB port should be positioned away from large metal structures that attenuate 2.4 GHz signals. For best throughput, place the host within line-of-sight of the access point and avoid operating near 2.4 GHz interference sources such as microwave ovens and Bluetooth peripherals. This page synthesizes distributor inventory, datasheet specifications, chipset architecture, and application guidance for the LM816-USB, providing practical engineering context beyond what the manufacturer datasheet alone offers.
LM822 - 802.11 b/g/n WiFi Module with IC Antenna, USB HCI | LM Technologies
The LM Technologies LM822 is a WiFi 802.11 b/g/n module operating in the 2.4 GHz ISM band with an onboard chip (IC) antenna and a USB Host Controller Interface (HCI). It supports the IEEE 802.11b, 802.11g and 802.11n standards and delivers data rates up to 150 Mbps on a single stream, packaged as a plug-and-play USB module for OEM integration. What is a WiFi 802.11n (WiFi 4) module? A WiFi 4 (802.11n) module is an embedded radio subsystem that implements the IEEE 802.11n physical and MAC layers and exposes either a host-controlled (HCI) or full-stack (network) interface to the host processor. The LM822 specifically implements HCI over USB, meaning the host CPU runs the network stack and the module acts as a 2.4 GHz radio front-end. These modules sit in the wireless connectivity layer of an embedded system, above the physical RF transceiver and below the application networking stack, and are widely used to retrofit wireless capability into industrial PCs, single-board computers, point-of-sale terminals and gateways. Key specifications of the LM822 per the LM Technologies datasheet include a 150 Mbps PHY rate, BPSK/QPSK/16-QAM/64-QAM modulation, WEP/TKIP/AES plus WPA/WPA2 encryption, a built-in IC antenna (no external antenna or RF connector required), and Linux/macOS/Windows 10 IoT Core/Windows XP to Windows 10/Windows Compact Embedded 6/7 driver support. Compliance with 802.11e bursting and 802.11I standards is also listed. The module draws 5 V through the USB bus and uses the USB port as both the data interface and the power rail. Because all protocol stacks are offloaded onto the host OS (it is HCI-only), the LM822 needs no additional firmware flashing for typical OS environments - it enumerates as a USB WiFi adapter. This makes it well suited to industrial PCs and SBCs that need to add wireless connectivity without a custom driver port. Typical applications include retrofitting WiFi onto legacy industrial PCs, adding wireless connectivity to single-board computers in kiosk and POS designs, embedded gateways that bridge Ethernet to 802.11n WiFi, and Windows Compact Embedded terminals. In each case the LM822's USB HCI and plug-and-play OS driver coverage reduce integration effort compared with bare 802.11 ICs. When designing with this module, note that 2.4 GHz operation only means the host system must coexist with Bluetooth, microwave ovens, and other 2.4 GHz interferers common in industrial and consumer environments. Channel planning and adequate placement of the host PCB relative to metal enclosures is critical because the onboard IC antenna's radiation pattern is shaped by the surrounding ground plane. This page synthesises distributor pricing, a feature comparison with adjacent LM Technologies modules, and practical integration notes that go beyond what the manufacturer datasheet alone covers, helping engineers decide whether the LM822 is the right drop-in wireless module for their embedded platform.
LM823 - WiFi 802.11 b/g/n 150Mbps USB Module | LM Technologies
The LM823 is a WiFi 4 (802.11 b/g/n) USB module from LM Technologies delivering up to 150Mbps wireless throughput at 2.4 GHz with HCI host interface via USB. It is offered in SMT form factor with an IPEX receptacle (u.FL-compatible antenna connector) and operates from a single 3.3 V supply. The module is designed to provide excellent performance with low power consumption while supporting b/g/n standards with full 150 Mbps PHY rate. A WiFi module is a compact radio subsystem that integrates the RF transceiver, baseband processor, MAC, and host interface (USB, SDIO, SPI, or UART) into a single, certified or pre-certified hardware block. It allows a host processor or embedded MCU to add wireless connectivity without having to design the analog RF chain, antenna matching network, or regulatory radio from scratch. WiFi modules are classified by generation (WiFi 4 = 802.11n, WiFi 5 = 802.11ac, WiFi 6 = 802.11ax), by host interface (USB, SDIO, SPI, UART), and by antenna integration (chip antenna, trace antenna, or external antenna via u.FL/IPEX). Key features of the LM823 include IEEE 802.11 b/g/n compliance, 150 Mbps maximum PHY data rate on a 2.4 GHz single-band radio, USB 2.0 HCI host interface, integrated IPEX/u.FL antenna receptacle for flexible external antenna selection, low-power operation, and a compact SMT package for high-density PCB placement. It is shipped in trays of 40 pieces and supports Linux/Android/Windows host drivers commonly available for USB WiFi dongle-class silicon. The module integrates a 2.4 GHz single-band 1x1 SISO radio with 20 MHz channel bandwidth, supporting DSSS/CCK for 802.11b and OFDM for 802.11g/n. Internally it relies on a USB-attached WiFi SoC whose host drivers are widely packaged in mainline Linux kernels, Android, and Windows, so no proprietary firmware porting is required on common host platforms. The IPEX receptacle allows the integrator to swap a higher-gain external antenna for better link margin in metal-enclosed products. Typical applications include embedded Linux gateways, IoT edge nodes, industrial wireless telemetry, point-of-sale terminals, retrofit WiFi for set-top boxes and media players, and USB-attached wireless connectivity for SBCs and developer boards that lack built-in WiFi. The 150 Mbps PHY rate is sufficient for video streaming up to 1080p, VoIP, and bulk file transfer on a local network. When designing with this module, mount the antenna connector area clear of ground copper and tall components to avoid pattern distortion; route the USB D+/D- pair as a 90 ohm impedance-controlled differential pair with matched length. For regulatory compliance, the modular transmitter typically still requires antenna selection and host-integration testing against FCC/CE rules for the final product. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the LM823 that are not consolidated in the LM Technologies datasheet alone.
LM825 - 3.4 dBi Magnetic Whip RF Antenna | Pulse Electronics
The Pulse Electronics LM825 is a fixed-position, straight magnetic-mount whip RF antenna with a stated peak gain of 3.4 dBi, designed for 800/900/1800/1900 MHz cellular and 2.4/5 GHz ISM bands. It is supplied as a 50 ohm antenna with an integrated magnetic base, intended for temporary or mobile mounting on ferrous metal surfaces where a permanent through-hole or adhesive mount is impractical. The antenna is delivered as a single-piece whip with magnetic base assembly and is widely used as a quick-deployment antenna for cellular modems, gateways, and wireless test setups. An RF antenna is the radiating element at the front end of any wireless system that converts guided radio-frequency energy on a transmission line into free-space electromagnetic waves (and vice versa on receive). Antennas are characterized by their radiation pattern, gain (in dBi referenced to an isotropic radiator), frequency band, VSWR, polarization, and physical mounting style. Whip antennas with magnetic bases occupy a specific niche: the magnetic base provides a low-impedance counterpoise on metal surfaces, allowing the whip to radiate efficiently without a ground plane being built into the antenna itself. This makes them ideal for prototyping, vehicular installs, and field testing where a permanent mount is not desired. Key features of the LM825 include its wide multi-band frequency response covering cellular 824-894 MHz, 1850-1990 MHz, and 2.4/5 GHz bands, a flexible whip section that resists breakage, and a robust magnetic base. The whip design produces an approximately omnidirectional radiation pattern in the azimuth plane when mounted on a sufficient ground plane, which simplifies placement on vehicles or equipment enclosures. The 50 ohm nominal impedance matches standard cellular and Wi-Fi radio modules without requiring an external matching network. In the underlying electrical architecture, the LM825 is a passive radiating element without active electronics; its gain and bandwidth are set by the mechanical geometry of the whip and the base loading coil. The magnetic base itself is part of the counterpoise return path: placing the antenna on a metal plate larger than approximately 30 cm in any direction significantly improves VSWR and radiation efficiency compared to placement on a small metal surface. The datasheet gain figure (3.4 dBi peak) is measured with a standard reference ground plane. Typical applications include cellular LTE/Cat-M/NB-IoT modems and routers, vehicle fleet telematics units, industrial IoT gateways, 2.4 GHz Wi-Fi and Bluetooth test setups, and temporary cellular signal surveys. The magnetic base also makes the antenna useful for bench characterization of wireless modules where a permanent antenna footprint is undesirable. When selecting an antenna, consider the minimum required ground-plane size for the magnetic base: small metal surfaces reduce efficiency below 800 MHz. For permanent installations, an NMO-mount or through-hole antenna typically provides better long-term reliability than a magnetic mount. This page synthesizes distributor pricing, application guidance, and cross-vendor antenna alternatives not consolidated in the manufacturer datasheet.
LM843 - WiFi 802.11ac + BT 5.0 2T2R USB Combo Module | LM Tech
The LM Technologies LM843 is a WiFi 802.11ac plus Bluetooth 5.0 dual-mode combination SMT/USB module in the LM843 series, providing 2-stream 802.11ac with Multi-User MIMO connectivity and integrated power management. Per the LM Technologies product page and datasheet, the module is offered in multiple SKUs covering tray/IPEX and 2x RF line-out antenna options, all sharing the same WiFi+BT 5.0 silicon foundation. A WiFi + Bluetooth combo module is a small surface-mount or USB assembly that packages a WiFi radio, a Bluetooth radio, an RF front-end, a crystal oscillator, and a host interface (USB, SDIO, or UART) into a single, pre-certified hardware block. This module category sits inside the broader taxonomy of RF modules -> RF transceivers -> wireless connectivity ICs -> semiconductors. By integrating both radios, the module reduces BOM, host-side firmware complexity, and time-to-market for devices that need simultaneous WiFi and Bluetooth coexistence. Key features of the LM843 include dual-band 2.4/5 GHz 802.11ac operation in a 2T2R MIMO configuration, Bluetooth 5.0 dual-mode support (Classic BR/EDR 2.1/3.0/3.0+HS and Low Energy 4.0/4.1/4.2/5.0) with multiple simultaneous Classic+LE connections, USB 2.0 host interface, and on-board power management for maximising throughput across coexisting WiFi/BT links. Hardware is BT 5.0 compliant at the silicon level. Architecturally, the LM843 series uses a 2x2 MIMO WiFi subsystem combined with a Bluetooth 5.0 dual-mode radio sharing a single module PCB and antenna chain through an internal coexistence interface. The USB 2.0 interface carries both WiFi and Bluetooth traffic to the host, simplifying driver bring-up versus SDIO+UART split designs. Typical applications include industrial IoT gateways, wireless POS terminals, set-top boxes and media streaming dongles, USB WiFi+BT adapters, in-vehicle infotainment companion radios, and embedded Linux/Windows host platforms requiring a pre-certified combo radio. Design tip: confirm the exact SKU variant - LM843-8432 (tray, 2x IPEX), LM843-8434 (USB, 2x IPEX), LM843-8438 (tray, 2x RF line-out) - matches the desired host interface (USB vs SMT) and antenna connector (IPEX MHF4 vs RF line-out pad) before PCB layout. This page synthesises verified distributor pricing, drop-in alternative notes, and application-level design guidance that are not consolidated in the LM Technologies datasheet alone.
LM845 - WiFi 802.11ac + Bluetooth 4.2 USB Nano Adapter | LM Technologies
The LM Technologies LM845 is a compact WiFi 5 (802.11ac) and Bluetooth 4.2 dual-mode USB nano adapter (dongle) built around a fully integrated single-chip Realtek radio. It operates on the 2.4 GHz and 5 GHz WiFi bands with 1-stream 802.11ac and Multi-user MIMO (MU-MIMO), and it supports Bluetooth v4.2 Dual Mode with backward compatibility to Bluetooth v2.1+EDR and v3.0. Classic Bluetooth and Bluetooth Low Energy (LE) can run simultaneously, enabling concurrent wireless audio/data and BLE beacon use cases over the same USB interface. A WiFi + Bluetooth USB combo dongle is a peripheral that adds short-range wireless connectivity to a host PC, embedded board, or industrial appliance via the USB bus. Inside the dongle, a single radio SoC handles both WiFi (the 802.11 family) and Bluetooth (BR/EDR/LE), sharing one antenna chain through an internal RF front-end. The host sees two logical interfaces (a network interface for WiFi and an HCI interface for Bluetooth) over USB, which simplifies driver integration and shrinks the dongle to a nano form factor that can be left plugged into a laptop or set-top box. Key features of the LM845 include 1-stream 802.11ac Wave-2 operation with MU-MIMO, dual-band 2.4/5 GHz support, Bluetooth 4.2 Dual Mode (BR/EDR + LE) with simultaneous Classic + LE links, a USB 2.0 high-speed host interface, and a Realtek-based single-chip radio that minimizes BOM and power draw. The dongle form factor is sized for always-on installation in laptops, mini-PCs, and industrial HMIs. The internal architecture relies on a Realtek combo MAC/baseband IC with an integrated 2.4/5 GHz PA/LNA chain. WiFi throughput reaches 433 Mbps on the 5 GHz 802.11ac 1x1 link, while Bluetooth supports the standard BR/EDR profiles plus BLE GATT services for IoT pairing and beaconing. Because WiFi and Bluetooth share the same RF chain, the firmware coordinates time-division scheduling to avoid mutual interference. Typical applications include adding dual-band WiFi 5 + Bluetooth to legacy desktop or embedded systems, IoT gateways and industrial PCs that need a quick wireless drop-in upgrade, point-of-sale terminals that pair with BLE peripherals, retrofitted media PCs and set-top boxes that need 5 GHz WiFi for HD streaming, and developer/test rigs that require a stable Realtek-based combo radio for driver qualification. When designing with the LM845, remember that it is a finished USB dongle, not a bare IC: designers cannot change the antenna, regulators, or USB stack. Host drivers must support the underlying Realtek chipset for full 802.11ac + Bluetooth 4.2 functionality, and the host OS USB port must provide enough bus power for the 5 GHz PA under load. This page synthesizes verified distributor information, parametric specifications, and design guidance not consolidated on any single manufacturer or distributor page, including practical notes on host-driver compatibility and concurrent WiFi + Bluetooth operation.
LM848 - Wi-Fi 6 (802.11ax) and Bluetooth 5.2 USB Combo Adapter | LM Technologies
The LM Technologies LM848 is a USB 3.0 combo adapter that integrates Wi-Fi 6 (802.11ax) and Bluetooth 5.2 connectivity through a single USB Host Controller Interface (HCI) port. Designed for embedded Linux, Windows, and Android hosts, the LM848 exposes a high-throughput wireless pipe without burdening the host CPU with baseband firmware, because the dual-mode radio runs the 802.11ax MAC/PHY and the BT 5.2 controller silicon on-module. The USB 3.0 uplink provides the bandwidth required for 2x2 MU-MIMO, 160 MHz channel operation, and OFDMA scheduling features defined in the 802.11ax amendment. A USB combo adapter is a peripheral that bridges a host processor to two or more wireless radios through a standardized serial bus. In the wider connectivity taxonomy, this places the LM848 as a USB peripheral module -> wireless network adapter -> combo radio module -> RF subsystem, sitting beneath the host's network stack and above the antenna. USB-based combo adapters are favored over SDIO or PCIe cards in industrial and prototyping environments because they avoid slot allocation, simplify thermal management, and survive hot-swap events without rebooting the host. The headline features of the LM848 include 802.11ax 2x2 operation, WPA3 security compliance, dual-band 2.4 GHz / 5 GHz / 6 GHz coverage where supported by regional regulations, Bluetooth 5.2 with LE Audio and Long Range (PHY Coded), and a USB 3.0 Type-A form factor that draws bus power. The device advertises ultra-fast throughput that suits video streaming, edge AI gateways, and dense Wi-Fi deployments where 802.11ac throughput would saturate. Architecturally, the LM848 pairs an 802.11ax SoC with a BT 5.2 companion chip, sharing a single USB endpoint group over a USB 3.0 SuperSpeed link. The radio front end is tuned for worldwide regulatory domains, and the firmware exposes standard nl80211/cfg80201 (Linux) and MediaTek/Realtek-style vendor extensions (Windows) for throughput tuning. Typical applications include industrial IoT gateways, in-vehicle infotainment prototyping, point-of-sale terminals, medical telemetry docks, and digital signage where Wi-Fi 6 capacity and Bluetooth coexistence are both required. When designing with the LM848, ensure the host supplies a USB 3.0 port capable of delivering 900 mA, and place the antenna at least 20 mm from any metal enclosure walls to preserve EIRP margin.
LM849 - Wi-Fi 6/BT 5.2 2T2R USB Combo Module | LM Technologies
The LM Technologies LM849 is a dual-band Wi-Fi 6 (IEEE 802.11ax) plus Bluetooth 5.2 combo embedded module in a USB form factor that delivers 2T2R MIMO wireless connectivity for OEM, industrial, medical, scientific, and commercial applications. The module integrates a high-speed host interface compliant with the USB 3.0 specification and remains fully backward compatible with USB 2.0 hosts, supporting 2.4 GHz and 5 GHz simultaneous operation. It is shipped with dual factory antenna configurations supporting either on-board IPEX micro-coaxial connectors or SMT RF line-out pads to suit different mechanical layouts. A Wi-Fi module (also called a wireless module or RF module) is a pre-certified subsystem that integrates a radio transceiver, baseband processor, RF front-end, and host interface on a single PCB, enabling product designers to add wireless connectivity without writing a full driver stack or performing radio compliance testing from scratch. Wi-Fi modules sit at the bottom of the connectivity hierarchy: RF transceiver -> Wi-Fi/BT module -> wireless SoC -> semiconductor, and they are classified by radio technology (Wi-Fi 6 / 802.11ax), host interface (USB / SDIO / PCIe), and supported bands (2.4 GHz / 5 GHz / 6 GHz). Key features of the LM849 include 2x2 MU-MIMO on 802.11ax with up to 1200 Mbps physical layer rate, Bluetooth 5.2 dual-mode (BR/EDR/LE) support, USB 3.0 SuperSpeed host interface, integrated RF shielding, and an industrial operating temperature range suitable for OEM embedded designs. The module is pre-certified in many jurisdictions, which removes a major certification barrier for low-to-medium volume product launches. Typical applications include industrial IoT gateways, point-of-sale terminals, medical telemetry dongles, scientific instrumentation, and commercial wireless display adapters where a USB-attached radio is more practical than an M.2 card. The 2T2R configuration also benefits video streaming and VoIP endpoints that benefit from transmit beamforming and dual-stream receive diversity. When designing with the LM849, confirm the host platform provides sufficient USB 3.0 bus power during radio transmit peaks (typical peak current ~900 mA) and that the chassis antenna path meets the 50 ohm controlled-impedance requirement of either the IPEX connector variant or the SMT RF pad variant.
LM961 - Bluetooth 5.0 Dual Mode Module | LM Technologies
The LM Technologies LM961 is a Bluetooth 5.0 Dual Mode module that combines a Bluetooth Low Energy radio and a Bluetooth v2.0/v2.1 classic radio on a single core with an integrated microcontroller and 8 Mbit flash memory. According to the LM Technologies LM961 datasheet, this module operates as either a GAP Central (master) or GAP Peripheral (slave) device and supports streaming high-quality data while maintaining backward compatibility with Bluetooth v2.0, v2.1, v4.0, v4.1, and v5.0 peers, including iOS and Android hosts. The module is targeted at embedded designs that need a standalone, AT-command-configurable wireless link without requiring an external host MCU to manage the stack. A Bluetooth module is a self-contained subsystem that integrates the radio transceiver, baseband controller, host interface, and sometimes an on-board MCU plus an antenna matching network, exposing a simplified UART/SPI/USB control surface to the host processor. In the broader taxonomy, the LM961 sits within RF modules, which fall under RF & Wireless components, sitting alongside bare RF transceivers, RF amplifiers, and integrated SoCs. Dual mode specifically means the silicon can speak both Classic Bluetooth (BR/EDR) and Bluetooth Low Energy under the same Bluetooth 5.0 stack, which is critical for products that must interoperate with the installed base of classic-only peripherals while also taking advantage of BLE's low-power data channels. Key features include 3 Mbps maximum data rate (BLE 5.0 PHY), embedded Bluetooth dual mode stack, 8 Mbit on-module flash for user application code, and configuration via AT commands in configuration mode. The module supports GAP central and peripheral roles and can establish Bluetooth Low Energy connections in addition to classic SPP/ACL streams. It is designed as a single-core standalone module, meaning the host MCU and the Bluetooth controller share processing on the same die, simplifying hardware design. The architecture pairs an integrated MCU with the Bluetooth 5.0 dual mode core, freeing the application processor from running the Bluetooth stack. Power consumption is dominated by the radio duty cycle, so BLE connection intervals can be tuned for ultra-low average draw in battery-powered products. The 8 Mbit flash allows OEMs to embed application firmware and AT-command scripts directly on the module. Typical applications include industrial IoT gateways, health and fitness wearables, M2M telemetry, point-of-sale terminals, and cable replacement for serial-port legacy equipment. The module is also well-suited for streaming high-quality sensor data over SPP or BLE to iOS and Android tablets. When designing with this device, confirm that the antenna placement keeps the keep-out zone clear of ground pour and that the host PCB provides a clean 3.3 V rail, because TX current spikes directly modulate VCC and degrade RF performance. AT-command configuration requires the host UART to be set to the documented baud rate and flow-control mode. This page synthesizes distributor pricing, drop-in module alternatives from the LM Technologies family, and practical RF design notes not found on the manufacturer datasheet cover page.
LMX2531LQ1742/NOPB - High-Performance RF Synthesizer | TI
The LMX2531LQ1742/NOPB is a high-performance frequency synthesizer system with integrated VCO from Texas Instruments. It combines a fully integrated delta-sigma PLL and VCO with a fully integrated tank circuit, along with integrated third and fourth poles that are adjustable. The device operates over a frequency range of 1760 MHz to 1866 MHz and is housed in a 36-pin WQFN (NJG) package with an exposed pad. It is designed for low power consumption and high performance, making it suitable for a wide range of RF applications. A frequency synthesizer is a key building block in RF and wireless systems, generating precise local oscillator signals for upconversion and downconversion. The LMX2531 integrates the PLL, VCO, and loop filter components, reducing external component count and board space. This integration simplifies design and improves reliability, as the critical RF path is contained within a single device. Key features include ultra-low noise and high-precision LDOs integrated for the PLL and VCO, which yield higher supply-noise immunity and more consistent performance. The device supports a wide supply voltage range and includes a programmable charge pump, phase frequency detector, and fractional-N or integer-N operation. The integrated VCO covers the specified frequency band with excellent phase noise performance, essential for communication systems. The LMX2531 uses a delta-sigma fractional-N architecture, allowing fine frequency resolution while maintaining low phase noise. The integrated LDOs isolate the sensitive analog circuits from supply noise, improving overall system performance. The device operates over the industrial temperature range of -40°C to +85°C, ensuring reliability in demanding environments. Typical applications include wireless infrastructure, base stations, point-to-point radios, satellite communications, and test and measurement equipment. The wide frequency range and low phase noise make it ideal for local oscillator generation in transceivers and frequency hopping systems. When designing with the LMX2531, careful attention must be paid to power supply decoupling and PCB layout to minimize noise coupling. The exposed pad should be soldered to a ground plane for thermal and electrical performance. The device requires an external loop filter, which should be designed according to the application's phase noise and lock time requirements.
LMX2572LP - 2GHz Low Power RF Synthesizer | Texas Instruments
The Texas Instruments LMX2572LP is a low-power, high-performance wideband RF synthesizer that generates frequencies from 12.5 MHz to 2 GHz without an internal doubler. It integrates LDOs from a single 3.3-V supply, eliminating the need for external low-noise LDOs. The device consumes only 70 mA at 3.3 V, making it ideal for battery-powered and portable applications. An RF synthesizer is a key building block in communication systems, generating precise local oscillator signals for frequency conversion. It typically consists of a phase-locked loop (PLL) with a voltage-controlled oscillator (VCO), frequency dividers, and a phase detector. The LMX2572LP integrates these functions, providing a complete frequency synthesis solution in a compact 40-pin VQFN package. Key features include excellent phase noise of -124 dBc/Hz at 100-kHz offset with an 800-MHz carrier, a PLL figure of merit of -232 dBc/Hz, and normalized 1/f noise of -123.5 dBc/Hz. The 32-bit N-divider allows fine frequency resolution, and the device supports FSK modulation for digital mobile radio (DMR) and wireless microphone applications. The LMX2572LP uses a wideband PLL architecture with an integrated VCO, achieving low phase noise and fast settling. The integrated LDOs provide clean supply rails, reducing external component count and improving noise performance. The device operates from a single 3.3-V supply, simplifying power supply design. Typical applications include DMR radios, wireless microphones, test and measurement equipment, and any system requiring a low-power, low-noise frequency source. The wide frequency range and FSK support make it versatile for various wireless communication standards. When designing with the LMX2572LP, ensure proper decoupling of the power supply pins and use a clean reference clock to achieve optimal phase noise. The device's SPI interface allows easy configuration of frequency, modulation, and output power settings.
LN940A9 - LTE Cat 9 M.2 Module 450 Mbps GNSS | Telit
The Telit LN940A9 is an LTE Category 9 M.2 data card module delivering up to 450 Mbps downlink and 50 Mbps uplink peak data rates, with global 3G fallback and an integrated GNSS receiver, housed in the industrial-grade M.2 form factor for mobile computing, networking, and industrial IoT platforms. An LTE Cat 9 module is a cellular wide-area-network transceiver that aggregates multiple LTE carriers (carrier aggregation, up to 3x20 MHz in Cat 9) to reach higher throughput than single-carrier Category 4 devices. Within the wireless connectivity hierarchy, it sits between entry-level Cat 4 modules and LTE-Advanced Pro (Cat 11 and above) devices, and belongs to the broader family of cellular modems, WWAN data cards, and M2M/IoT communication modules. Key features of the LN940A9 include LTE Category 9 capability for North America, Europe, and APAC, worldwide 3G fallback for coverage continuity, built-in GNSS for positioning, and a power-optimization enablement suite. According to the Telit LN94x series datasheet, the LN940 family supports Adaptive Clocking, Selective Suspend, Link Power Management, Dynamic Power Reduction, and Tunable Antenna features that together reduce power consumption in battery-powered devices. The LN940 family is optimized for low power consumption and a smaller, thinner footprint than older PCIe mini-card designs. The industrial-grade M.2 form factor allows easy integration into laptops, tablets, routers, gateways, and ruggedized industrial IoT devices. The M.2 interface carries USB 3.0 / PCIe connectivity, SIM, and GNSS signals over the standard M.2 edge connector, simplifying mechanical design and antenna placement. In practice, the module is used as the WWAN engine behind a host OS driver stack (Windows and Linux drivers are available per 4gltemall documentation listings). Typical applications include mobile computing WWAN cards (the LN940A9 is widely referenced as T77W676 in branded laptop builds), industrial IoT gateways and routers requiring resilient LTE-A backhaul, and networking equipment needing 450 Mbps downlink with 3G fallback. The integrated GNSS receiver supports asset tracking and location-aware services without a separate GPS module. Design consideration: as a cellular module, the LN940A9 requires careful RF layout - keep the M.2 antenna connectors matched to 50 ohm, follow the Telit hardware design guidelines for power sequencing, and budget for module thermal dissipation during sustained uplink transfers. This page synthesizes distributor pricing references, drop-in alternatives, application guidance, and design notes not found in the manufacturer datasheet alone, giving engineers a single citable reference for the Telit LN940A9.