KSZ8041TLI-S vs KSZ8041TL Сравнение
Подробное сравнение бок о бок KSZ8041TLI-S от Microchip Technology и KSZ8041TL от Microchip Technology. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Microchip Technology
KSZ8041TLI-S - 10/100 Ethernet PHY | Microchip | TQFP-48
KSZ8041TLI-S ✓ АктивенСравнение характеристик
| Параметр | KSZ8041TLI-S | KSZ8041TL |
|---|---|---|
| Бренд | Microchip Technology | Microchip Technology |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Device Type | 10BASE-T/100BASE-TX Ethernet physical-layer transceiver | Ethernet interface IC / physical-layer transceiver |
| Supported Data Rates | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s |
| Supply Architecture | Single supply | Single-supply |
| Host Interface Options | MII, RMII, and SMII | — |
| Auto MDI/MDI-X | Supported | — |
| Process Technology | Low-power CMOS mixed-signal process | — |
| Ethernet Standard | IEEE 802.3u | — |
| Number of Transceivers | 1 | — |
| Корпус | 48-pin TQFP, 7 x 7 mm | 48-TQFP (7 x 7 mm) |
| Тип монтажа | Surface mount | Surface mount |
| Статус RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Compliant | [DATA_NEEDED: REACH status] |
| Automotive Network Support | HP Auto MDI/MDI-X support | — |
| Operating Voltage | [DATA_NEEDED: operating voltage] | — |
| Диапазон рабочих температур | [DATA_NEEDED: operating temperature range] | — |
| Maximum Link Distance | [DATA_NEEDED: maximum link distance] | — |
| Typical Transceiver Power Consumption | [DATA_NEEDED: typical power consumption] | — |
| Magnetic Interface | [DATA_NEEDED: magnetic interface requirement] | — |
| Lead-Free Packaging | [DATA_NEEDED: lead-free packaging status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Pin Configuration | [DATA_NEEDED: numbered pin configuration] | — |
| Product Type | — | 10BASE-T/100BASE-TX Ethernet physical-layer transceiver |
| Host Interfaces | — | MII, RMII, and SMII |
| Cable Standard | — | 10BASE-T and 100BASE-TX |
| Mixed-Signal Design | — | Yes; intended to extend signaling distance while reducing power consumption |
| Auto MDI/MDIX | — | HP Auto MDI/MDIX |
| Interrupt Signal | — | INTRP on pin 32; optional PHY-register status-update signal |
| Number of Drivers/Receivers | — | 1 driver and 1 receiver |
| Рабочая температура | — | [DATA_NEEDED: operating temperature range] |
| Напряжение питания | — | [DATA_NEEDED: supply voltage range] |
| Interface Clock | — | [DATA_NEEDED: clock frequency] |
| Ethernet Magnetics | — | [DATA_NEEDED: supported magnetics and isolation configuration] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |