KSZ8041TLI-S vs KSZ8041TL 비교

다음의 상세 나란히 비교: KSZ8041TLI-S 제조: Microchip Technology 및 KSZ8041TL 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Microchip Technology
KSZ8041TLI-S KSZ8041TLI-S - 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TLI-S - 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TLI-S ✓ 활성
Microchip Technology
KSZ8041TL KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL ✓ 활성

사양 비교

파라미터 KSZ8041TLI-S KSZ8041TL
브랜드 Microchip Technology Microchip Technology
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Device Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver Ethernet interface IC / physical-layer transceiver
Supported Data Rates 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s
Supply Architecture Single supply Single-supply
Host Interface Options MII, RMII, and SMII —
Auto MDI/MDI-X Supported —
Process Technology Low-power CMOS mixed-signal process —
Ethernet Standard IEEE 802.3u —
Number of Transceivers 1 —
패키지 48-pin TQFP, 7 x 7 mm 48-TQFP (7 x 7 mm)
실장 유형 Surface mount Surface mount
RoHS 상태 Compliant [DATA_NEEDED: RoHS status]
REACH Status Compliant [DATA_NEEDED: REACH status]
Automotive Network Support HP Auto MDI/MDI-X support —
Operating Voltage [DATA_NEEDED: operating voltage] —
동작 온도 범위 [DATA_NEEDED: operating temperature range] —
Maximum Link Distance [DATA_NEEDED: maximum link distance] —
Typical Transceiver Power Consumption [DATA_NEEDED: typical power consumption] —
Magnetic Interface [DATA_NEEDED: magnetic interface requirement] —
Lead-Free Packaging [DATA_NEEDED: lead-free packaging status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Pin Configuration [DATA_NEEDED: numbered pin configuration] —
Product Type — 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Host Interfaces — MII, RMII, and SMII
Cable Standard — 10BASE-T and 100BASE-TX
Mixed-Signal Design — Yes; intended to extend signaling distance while reducing power consumption
Auto MDI/MDIX — HP Auto MDI/MDIX
Interrupt Signal — INTRP on pin 32; optional PHY-register status-update signal
Number of Drivers/Receivers — 1 driver and 1 receiver
동작 온도 — [DATA_NEEDED: operating temperature range]
공급 전압 — [DATA_NEEDED: supply voltage range]
Interface Clock — [DATA_NEEDED: clock frequency]
Ethernet Magnetics — [DATA_NEEDED: supported magnetics and isolation configuration]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청