KSZ8041TLI-S vs KSZ8041TL Karşılaştırma

Ayrıntılı yan yana karşılaştırma KSZ8041TLI-S tarafından Microchip Technology ve KSZ8041TL tarafından Microchip TechnologyAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Microchip Technology
KSZ8041TLI-S KSZ8041TLI-S - 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TLI-S - 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TLI-S ✓ Aktif
Microchip Technology
KSZ8041TL KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL ✓ Aktif

Özellik Karşılaştırması

Parametre KSZ8041TLI-S KSZ8041TL
Marka Microchip Technology Microchip Technology
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Device Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver Ethernet interface IC / physical-layer transceiver
Supported Data Rates 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s
Supply Architecture Single supply Single-supply
Host Interface Options MII, RMII, and SMII —
Auto MDI/MDI-X Supported —
Process Technology Low-power CMOS mixed-signal process —
Ethernet Standard IEEE 802.3u —
Number of Transceivers 1 —
Paket 48-pin TQFP, 7 x 7 mm 48-TQFP (7 x 7 mm)
Montaj Türü Surface mount Surface mount
RoHS Durumu Compliant [DATA_NEEDED: RoHS status]
REACH Status Compliant [DATA_NEEDED: REACH status]
Automotive Network Support HP Auto MDI/MDI-X support —
Operating Voltage [DATA_NEEDED: operating voltage] —
İşletim Sıcaklığı Aralığı [DATA_NEEDED: operating temperature range] —
Maximum Link Distance [DATA_NEEDED: maximum link distance] —
Typical Transceiver Power Consumption [DATA_NEEDED: typical power consumption] —
Magnetic Interface [DATA_NEEDED: magnetic interface requirement] —
Lead-Free Packaging [DATA_NEEDED: lead-free packaging status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Pin Configuration [DATA_NEEDED: numbered pin configuration] —
Product Type — 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Host Interfaces — MII, RMII, and SMII
Cable Standard — 10BASE-T and 100BASE-TX
Mixed-Signal Design — Yes; intended to extend signaling distance while reducing power consumption
Auto MDI/MDIX — HP Auto MDI/MDIX
Interrupt Signal — INTRP on pin 32; optional PHY-register status-update signal
Number of Drivers/Receivers — 1 driver and 1 receiver
İşletim Sıcaklığı — [DATA_NEEDED: operating temperature range]
Besleme Gerilimi — [DATA_NEEDED: supply voltage range]
Interface Clock — [DATA_NEEDED: clock frequency]
Ethernet Magnetics — [DATA_NEEDED: supported magnetics and isolation configuration]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin