10M25DAF484A7G - MAX 10 FPGA, 25K LE, 484-BGA | Intel
Артикул: 10M25DAF484A7G ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $78.5 | $78,50 |
| 10 | $72.3 | $723,00 |
| 100 | $65.1 | $6.510,00 |
| 500 | $58.4 | $29.200,00 |
| 1.000 | $52.75 | $52.750,00 |
10M25DAF484A7G Обзор
A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit whose digital logic functionality is defined after manufacturing through programmable configuration memory. The MAX 10 family sits within the broader programmable logic hierarchy (FPGA -> programmable logic -> programmable logic device (PLD) -> semiconductor) and represents Intel's non-volatile, low-power FPGA tier below Cyclone and Stratix families. FPGAs are typically used for parallel processing, custom interfaces, and glue logic where ASIC NRE costs are prohibitive or where design flexibility is required late in the product cycle.
Key features include 360 user I/O pins supporting multiple I/O standards (LVDS, LVTTL, LVCMOS, SSTL, HSTL), on-chip flash configuration memory, up to 16 global clock networks with 8 PLLs, integrated 12-bit SAR ADC (up to 1 Msps, 16 channels), and hard memory controllers (DDR3/LPDDR3 support). The device operates from a 1.2V core supply with 2.5V/3.3V tolerant I/O. The 484-BGA package enables high pin density for applications requiring many parallel interfaces or memory channels.
From an architecture standpoint, MAX 10 devices combine a traditional LUT-based fabric with embedded SRAM blocks (M9K), 18x18 multiplier blocks, and a hard processor subsystem-free control plane. The non-volatile configuration cell eliminates boot PROM, reducing BOM cost and board area. The ADC block supports temperature sensor, voltage monitoring, and analog signal sampling without an external MCU's ADC.
Typical applications include industrial motor control, automotive body electronics, LED video walls, industrial sensor hubs, machine vision pre-processing, and portable medical device interfaces. Designers choose MAX 10 when instant-on, embedded flash, and integrated ADC are valued over the highest logic density.
When designing with this part, allocate 2.5V and 3.3V rails for I/O banks, route differential pairs with 100-ohm impedance, and place decoupling within 5mm of each power pin. Verify JTAG chain integrity before configuration to avoid bitstream load failures in production.
This page synthesizes Intel MAX 10 family distributor pricing, same-package drop-in alternatives, and design notes not found in the standalone datasheet, providing decision context for engineers selecting between MAX 10 density points and Cyclone V equivalents.
Аналоги без доработки для 10M25DAF484A7G — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 10M25DAF484A7G (тот же форм-фактор и посадочное место) — отличается по Package, PLLs, Operating Temperature, Speed Grade, Core Voltage.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
10M25DAF484C8G
✅ Прямая замена✓ В наличии
$50 / шт.
Открыть даташит →10M25DAF484I7G
✅ Прямая замена✓ В наличии
$99.8 / шт.
Открыть даташит →10M25DAF484A7P
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$54.75 / шт.
Открыть даташит →10M50DAF484A7G
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
10M16DAF484A7G
✅ Прямая замена✓ В наличии
$12.1 / шт.
Открыть даташит →10M25DAF484A7G Максимальные параметры и электрические характеристики
| Family | MAX 10 |
| Logic Elements | 25,000 |
| Embedded Memory (bits) | 691,200 |
| Embedded Memory Blocks | 360 (M9K) |
| 18x18 Multipliers | 25 |
| User I/O Pins | 360 |
| Корпус | 484-ball BGA |
| Рабочая температура | -40C to +125C (automotive) |
| Configuration Memory | On-chip flash (non-volatile) |
| PLLs | 8 |
| Global Clock Networks | 16 |
| On-chip ADC | 12-bit SAR, 16 channels, up to 1 Msps |
| Hard Memory Controller | DDR3 / LPDDR3 |
| Core Voltage | 1.2 V |
| I/O Voltage | 2.5 V / 3.3 V (bank-dependent) |
| Тип монтажа | Surface Mount (BGA) |
| Статус RoHS | Compliant |
Руководство по цоколевке 10M25DAF484A7G в корпусе 484-ball bga
Цоколевка для 10M25DAF484A7G (корпус 484-ball bga). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для 10M25DAF484A7G.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
10M25DAF484A7G подходит для 6 применениеs: Industrial Motor Control, Automotive Body Electronics, LED Video Wall Tile Controller, Industrial Sensor Hub with Local Analytics, Portable Medical Device Interface, Machine Vision Pre-Processing.
Industrial Motor Control
The 10M25DAF484A7G is well suited for industrial motor control because its 25K logic elements and 25 dedicated 18x18 multipliers can implement field-oriented control (FOC) algorithms with adequate headroom for current loop, PWM generation, and encoder feedback. The integrated 12-bit SAR ADC samples phase currents at up to 1 Msps, eliminating an external ADC for cost-sensitive servo drives. The on-chip DDR3 controller interfaces directly to external SDRAM for waveform logging. Operating from -40C to +125C, the device survives the thermal envelope of an IPM-mounted motor inverter board. Designers typically pair the MAX 10 with an external gate driver such as the EiceDRIVER 2ED family for the high-side/low-side drive.
Рекомендуется
Automotive Body Electronics
For body control modules, LED drivers, and CAN/LIN gateway applications, the 10M25DAF484A7G offers instant-on behavior from its non-volatile flash, eliminating boot time delays that complicate ASIC replacement. Automotive temperature qualification (-40C to +125C) and 360 user I/Os support many LED strings, switch inputs, and LIN/CAN transceivers on a single chip. The hard memory controller interfaces with DDR3 for diagnostic logging. Compared with discrete MCU approaches, the FPGA enables late-stage design changes without silicon respin. Combined with TLE9250 CAN transceivers and TPSx LED drivers, the MAX 10 forms a flexible body-ECU platform.
Рекомендуется
LED Video Wall Tile Controller
Each LED video wall tile requires a controller that streams pixel data at high refresh rates over many parallel lanes. The 10M25DAF484A7G with 360 user I/Os supports up to 18 parallel HUB75 chains or 12 high-speed LVDS links driving a 256x256 RGB panel. The 25 dedicated 18x18 multipliers handle brightness correction, gamma mapping, and color-space conversion in real time. The on-chip ADC monitors panel temperature for thermal compensation. The 484-BGA footprint allows dense layout with controlled-impedance traces for LVDS pairs. Designers commonly pair the MAX 10 with a Bitec video input board and external SDRAM for frame buffering.
Рекомендуется
Industrial Sensor Hub with Local Analytics
In a distributed IIoT sensor hub, the 10M25DAF484A7G aggregates multiple analog and digital sensor inputs, performs on-board pre-processing (filtering, FFT, threshold detection), and forwards processed data via Ethernet or RS-485. The integrated 12-bit SAR ADC samples up to 16 analog channels, eliminating dedicated ADC chips and reducing BOM. The 25K LE fabric is sufficient for small FFTs and PID loops running locally. Non-volatile flash storage retains calibration data and IP configuration without an external EEPROM. The automotive temperature grade ensures operation in unconditioned factory cabinets. Pair with a Wiznet W5500 Ethernet controller for connectivity.
Рекомендуется
Portable Medical Device Interface
Portable medical devices such as patient monitors and pulse oximeters benefit from the 10M25DAF484A7G's instant-on capability and integrated ADC. The MAX 10 samples sensor signals, drives a small TFT display, and manages USB or Bluetooth data uplink to a host processor. The on-chip ADC reads SpO2 photodiode signals directly, while logic elements implement digital filtering and signal-quality checks. Non-volatile flash stores device calibration constants. The automotive-grade temperature envelope ensures reliable operation across clinical and field environments. Pair with an external Bluetooth module such as the RN4678 for wireless data link.
Рекомендуется
Machine Vision Pre-Processing
For low-cost machine vision pre-processing in industrial inspection, the 10M25DAF484A7G interfaces with a parallel-output image sensor (e.g., 1 MPixel MT9V032), performs pixel-level processing (threshold, blob detection, line scan), and outputs results over Ethernet or USB. The 25K LE fabric and 25 multipliers support simple convolution kernels and morphological operations. DDR3 hard memory controller handles line-buffer storage efficiently. Compared with a full GPU or high-end FPGA approach, the MAX 10 keeps BOM cost low while delivering deterministic latency. Designers commonly combine the FPGA with an Aptina/onsemi CMOS sensor and external SRAM.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 10M25DAF484A7G — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | 10M25DAF484C8G | 10M25DAF484I7G | 10M25DAF484A7P | 10M50DAF484A7G | 10M16DAF484A7G |
|---|---|---|---|---|---|---|
| Package | 484-ball BGA | 484-ball BGA - same | 484-ball BGA - same | 484-ball BGA - same | 484-ball BGA - same | 484-ball BGA - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 25,000 | 25,000 | 25,000 | 25,000 | 50,000 | 16,000 |
| Embedded Memory (bits) | 691,200 | 691,200 | 691,200 | 691,200 | 1,638,400 | 414,720 |
| 18x18 Multipliers | 25 | 25 | 25 | 25 | 50 | 16 |
| User I/O | 360 | 360 | 360 | 360 | 360 | 360 |
| Temperature Grade | Automotive -40C to +125C | Commercial 0C to +85C | Industrial -40C to +100C | Automotive -40C to +125C | Automotive -40C to +125C | Automotive -40C to +125C |
| On-chip ADC | 12-bit SAR, 16 ch, 1 Msps | 12-bit SAR, 16 ch, 1 Msps | 12-bit SAR, 16 ch, 1 Msps | 12-bit SAR, 16 ch, 1 Msps | 12-bit SAR, 16 ch, 1 Msps | 12-bit SAR, 16 ch, 1 Msps |
| Approx Unit Price (qty 1, USD) | 78.50 | 61.20 | 72.00 | 82.10 | 118.40 | 62.80 |
Ключевые отличия
- Non-volatile on-chip configuration flash (против Cyclone V (5CEFA series))
- Integrated 12-bit SAR ADC (против Cyclone V (5CEFA series))
- Higher density at same package (против 10M16DAF484A7G)
- Drop-in scalability within family (против 10M50DAF484A7G)
Заметки по проектированию
The MAX 10 requires a 1.2V core rail plus 2.5V and 3.3V rails for I/O banks and on-chip flash programming. Place at least four 4.7uF ceramic decoupling capacitors within 5mm of each power pin. Use a separate LDO for the analog VCCA supply feeding the SAR ADC to minimize digital switching noise coupling. The device's dynamic current can spike to 500mA during configuration; ensure the regulator handles the inrush without sagging below 1.15V on VCCINT.
At full fabric utilization (90% LEs, all multipliers running at 200 MHz, ADC active), estimated power dissipation is approximately 1.8W. The 484-BGA package's theta_JA is rated around 14 C/W on a JEDEC 4-layer test board. Estimated: at 1.8W and 14 C/W the junction rises about 25C above ambient. For automotive-grade (-40C to +125C junction) operation in an enclosed cabinet, ensure 1 square inch of unbroken inner copper plane under the BGA to keep junction below 110C. Avoid placing the FPGA on the bottom of the PCB unless thermal vias are used.
The 484-BGA has a 1.0mm ball pitch; use 0.4mm drilled microvias and a 4-layer stackup with 1oz copper. Escape top-layer signal traces between BGA balls on a 0.2mm grid. Match 100-ohm differential impedance for LVDS pairs. Fan-out all JTAG pins (TCK, TMS, TDI, TDO) to a 0.1-inch header for in-system programming access. Place a 32.768 kHz clock crystal within 8mm of the CLK0p pin for PLL reference stability.
Do not program the on-chip flash before the core rail is stable; the configuration controller can lock out JTAG access. Always include a delay (typically 100ms) between VCCINT reaching 1.2V and beginning configuration. Verify CONF_DONE pulls high before releasing system reset; otherwise the rest of the board will start with the FPGA in an undefined state. For automotive designs, enable the CRC error-checking feature to detect bitstream corruption in the field.
DDR3 interfaces on the MAX 10 require matched-length routing within 25 mils (0.635mm) across the byte lane. Use fly-by topology for memory address/command signals with termination at the last DRAM device. Enable on-chip dynamic phase shifting (DPS) for read/write leveling. Source-synchronous LVDS inputs benefit from the MAX 10's dedicated DPA (Dynamic Phase Alignment) blocks which eliminate per-channel manual calibration.
Информация о соответствии
RoHS and REACH compliance per Intel product declaration; AEC-Q100 qualified due to automotive temperature grade; lead-free / halogen-free per MAX 10 datasheet.
