10M40DCF256I7G - MAX 10 FPGA 40K LE, 256-FBGA | Intel
Артикул: 10M40DCF256I7G ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $86.87 | $86,87 |
| 10 | $78.18 | $781,80 |
| 100 | $69.5 | $6.950,00 |
| 500 | $60.81 | $30.405,00 |
| 1.000 | $52.12 | $52.120,00 |
10M40DCF256I7G Обзор
MAX 10 FPGAs are non-volatile, instant-on programmable logic devices that bridge the gap between traditional CPLDs and low-density FPGAs. They integrate flash configuration memory on-chip, eliminating the need for an external boot PROM. Within the broader programmable logic hierarchy, MAX 10 sits below Cyclone V and above MAX II/MAX V, targeting cost-sensitive, low-power, and board-management applications. With 40K logic elements, the 10M40 variant occupies the upper end of the MAX 10 family, alongside the 10M25, 10M16, 10M08, and 10M02 density grades.
Key features include 4-input look-up tables, 9-Kbit M9K memory blocks, embedded 18x18 multipliers, up to 2 PLLs, an internal flash configuration block, an optional 12-bit SAR ADC, and support for DDR3/LPDDR2 external memory interfaces. The 'I' suffix denotes the industrial temperature grade (-40C to +100C junction) and the speed grade is 7 (fastest commercial speed for this density/package).
The 10M40DCF256I7G uses Intel's Quartus Prime design software with Verilog, VHDL, and SystemVerilog support. Designers leverage IP cores for Nios II soft processors, Ethernet MAC, PCIe Gen1, and MIPI D-PHY. The 55 nm process balances cost, power, and density, while the non-volatile architecture provides instant-on behavior within microseconds of power-up.
Typical applications include industrial motor control, factory automation I/O expansion, video bridging and image preprocessing, IoT edge gateways, telecom line cards, and automotive infotainment prototyping. The internal ADC and analog features are especially useful for sensor aggregation.
When designing, ensure the 256-FBGA PCB land pattern supports the 1.0 mm ball pitch and that all VCCINT/VCCA/VCCIO rails are properly decoupled. JTAG and configuration pins must be terminated per Intel AN 443 for in-system programmability.
This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet, helping engineers select and source 10M40DCF256I7G quickly.
Аналоги без доработки для 10M40DCF256I7G — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 10M40DCF256I7G (тот же форм-фактор и посадочное место) — отличается по Package, Process Technology, Family, Embedded Memory (bits), Configuration Method.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
10M40DCF256C7G
✅ Прямая замена✓ В наличии
$26.4 / шт.
Открыть даташит →10M40DCF256C8G
✅ Прямая замена✓ В наличии
$71.8 / шт.
Открыть даташит →10M40DCF256A7G
✅ Прямая замена✓ В наличии
$21.8 / шт.
Открыть даташит →10M40DAF256I7G
✅ Прямая замена✓ В наличии
$65.8 / шт.
Открыть даташит →10M40DCF256I7G Максимальные параметры и электрические характеристики
| Series | MAX 10 |
| Family | Intel MAX 10 |
| Logic Elements (LE) | 40,000 |
| Embedded Memory (bits) | 1,290,240 |
| User I/O | 178 |
| Process Technology | 55 nm non-volatile (flash) |
| Core Voltage (VCCINT) | 1.2 V |
| Корпус | 256-FBGA (F256), 1.0 mm pitch |
| Speed Grade | 7 (fastest) |
| Temperature Grade | Industrial (-40C to +100C TJ) |
| PLLs | 2 (per device family datasheet) |
| Embedded Multipliers (18x18) | Yes (quantity per device datasheet) |
| Internal Flash Configuration | Yes (non-volatile, instant-on) |
| ADC | 12-bit SAR ADC (per family datasheet) |
| Тип монтажа | Surface Mount (BGA) |
| Статус RoHS | Compliant (per Intel product page) |
| Configuration Method | Internal flash / JTAG |
Руководство по цоколевке 10M40DCF256I7G в корпусе 256-fbga (f256), 1.0 mm pitch
Цоколевка для 10M40DCF256I7G (корпус 256-fbga (f256), 1.0 mm pitch). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для 10M40DCF256I7G.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
10M40DCF256I7G подходит для 6 применениеs: Industrial Motor Control, Factory Automation I/O Expansion, Video Bridging and Image Preprocessing, IoT Edge Gateways, Telecom Line Cards and Control Plane, Automotive Infotainment Prototyping.
Industrial Motor Control
The 10M40DCF256I7G fits industrial motor-control designs with its 40,000 logic elements, hard 12-bit SAR ADC for current/voltage sensing, and 178 GPIO for PWM and encoder feedback. Industrial -40C to +100C operation matches factory-floor thermal envelopes. Up to 2 PLLs and 18x18 multipliers handle field-oriented control (FOC) math in real time. Compared with microcontrollers, the FPGA offloads deterministic control loops at microsecond latency.
Рекомендуется
Factory Automation I/O Expansion
Use the 10M40DCF256I7G as a flexible industrial I/O aggregator bridging sensor networks (RS-485, IO-Link, SPI) to EtherCAT or PROFINET controllers. Its 256-FBGA package supports 178 GPIO with hot-swap tolerant LVCMOS 3.3 V and 2.5 V banks. The non-volatile flash configuration provides instant-on restart in <100 ms, essential for deterministic PLC backplane recovery after power loss.
Рекомендуется
Video Bridging and Image Preprocessing
The 10M40DCF256I7G supports LVDS-based camera-link aggregation, MIPI-CSI2 bridging, and basic image preprocessing (color conversion, scaling, region-of-interest extraction) in machine-vision designs. Its 1,290 Kbits of embedded M9K memory buffer video line data without external SDRAM. With 472.5 MHz internal fabric, it can drive 720p pipelines at 60 fps when paired with external DDR3 memory.
Рекомендуется
IoT Edge Gateways
The 10M40DCF256I7G functions as a low-power edge-compute node with Nios II soft-core CPU, hardware-accelerated TLS, and protocol bridging between Ethernet, Wi-Fi, BLE, and LoRa. Its non-volatile instant-on feature wakes in microseconds, ideal for event-driven edge processing. Industrial temperature rating supports outdoor enclosures. The hard ADC enables direct sensor interface without external analog front ends.
Рекомендуется
Telecom Line Cards and Control Plane
Telecom line cards use the 10M40DCF256I7G for glue logic, clock distribution, SERDES bridging, and control-plane state machines. Two PLLs provide flexible clock synthesis for backplane and framer interfaces. Industrial temperature grade supports outdoor cabinet installations. The MAX 10 instant-on feature ensures fast system recovery from brownout conditions.
Рекомендуется
Automotive Infotainment Prototyping
The 10M40DCF256I7G enables prototype development of automotive infotainment HMIs, rear-seat entertainment bridges, and CAN/LIN gateway logic. Industrial temperature rating covers most cabin environments, while the 10M40DCF256A7G automotive variant (AEC-Q100) should be selected for production deployments. Hard ADC simplifies battery monitoring and ambient sensor integration for HMI backlight control.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 10M40DCF256I7G — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | 10M40DCF256C7G | 10M40DCF256C8G | 10M40DCF256A7G | 10M40DAF256I7G |
|---|---|---|---|---|---|
| Package | 256-FBGA (F256) | 256-FBGA (F256) | 256-FBGA (F256) | 256-FBGA (F256) | 256-FBGA (F256) |
| Brand | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 40,000 | 40,000 | 40,000 | 40,000 | 40,000 |
| Embedded Memory (bits) | 1,290,240 | 1,290,240 | 1,290,240 | 1,290,240 | 1,290,240 |
| User I/O | 178 | 178 | 178 | 178 | 178 |
| Temperature Grade | Industrial (-40C to +100C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Automotive (-40C to +125C TJ, AEC-Q100) | Industrial (-40C to +100C) |
| Speed Grade | 7 | 7 | 8 (slower) | 7 | 7 |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Ключевые отличия
- Industrial temperature grade at speed grade 7 (против 10M40DCF256C8G)
- Industrial vs over-spec'd automotive grade (против 10M40DCF256A7G)
- Standard 'DC' feature mix vs 'DA' variant (против 10M40DAF256I7G)
Заметки по проектированию
The 256-FBGA package uses a 1.0 mm ball pitch and requires a 4-6 layer PCB with microvia stack-ups. Per Intel AN 443, all VCCINT and VCCA pins must be decoupled with 0.1 uF and 10 uF ceramic capacitors placed within 100 mils of the respective balls. Use a continuous GND plane under the BGA and stitch vias around the perimeter for thermal dissipation. PCB land-pattern tolerances should follow IPC-7351 for BGA packages.
The 10M40DCF256I7G requires separate VCCINT (1.2 V core), VCCA (2.5 V analog/pll), and VCCIO (1.2 V-3.3 V per bank) rails. A power-on sequence is recommended: VCCINT first, then VCCA, then VCCIO. Failure to sequence correctly can cause in-rush currents and latch-up. Estimated core current at full 40K-LE utilization is approximately 0.5-1 A depending on toggle rate; verify against the Quartus Prime PowerPlay early estimator for production designs.
Assign high-speed differential pairs (LVDS) to banks with dedicated SERDES support and route with 100 ohm differential impedance and length matching within 20 mils. JTAG pins (TCK, TMS, TDI, TDO) should be pulled to known states per the MAX 10 handbook to prevent spurious configuration. Keep the CLK clock input traces short and reference them to a continuous ground plane to minimize jitter and EMI.
Do not confuse the MAX 10 'DC' suffix with 'DA' - they share the 256-FBGA footprint but have different I/O bank counts, ADC channels, and PLL counts. Always verify the OPN's feature matrix in the MAX 10 device handbook before PCB layout finalization. The 10M40DCF256I7G has 8 I/O banks; older MAX 10 designs migrated from 10M25 may assume only 6 banks.
Информация о соответствии
RoHS and REACH compliance per Intel Altera product page. For AEC-Q100 qualified automotive applications, use the 10M40DCF256A7G variant instead.
