AD625CDZ - 25 MHz Instrumentation Amplifier | Analog Devices
Артикул: AD625CDZ ✗ Снят с производстваAD625CDZ Обзор
An instrumentation amplifier is a specialized amplifier category used to amplify small differential sensor signals while rejecting large common-mode voltages. In the broader signal-chain hierarchy, an instrumentation amplifier sits between sensors such as strain gauges, bridge transducers, thermocouples, and high-impedance sensing front ends, and the analog-to-digital converter or downstream measurement circuitry. The AD625 series is intended for applications requiring nonstandard gains, precision gain adjustment, and software-controlled measurement systems.
The AD625CDZ combines a 25 MHz gain-bandwidth product with programmable gain capability and a 650 kHz small-signal bandwidth. Its input bias current is listed at 10 nA, supporting high-impedance sensor interfaces, while the 5 V/us slew rate helps preserve signal fidelity in multiplexed measurement systems. The device is offered in a 16-CDIP through-hole package, which is useful for legacy laboratory, industrial, and instrumentation equipment where through-hole assembly and serviceability are preferred over a surface-mount land pattern.
Compared with ordinary precision op amps, the AD625CDZ provides a matched internal resistor network and integrated gain-setting arrangement, reducing the number of external precision components required in many gain configurations. The low-noise input stage and programmable gain are particularly useful for bridge-based measurement, biomedical instrumentation, current-loop receivers, and laboratory data-acquisition systems. The 650 kHz -3 dB bandwidth makes it suitable for signal bandwidths well below the unity-gain-frequency limit while preserving the flexibility to set different gains in software.
Typical applications include weighing systems using load cells, industrial process monitoring, laboratory measurement equipment, and medical or diagnostic instrumentation. In a bridge or strain-gauge circuit, the amplifier converts a small differential excitation error into a level suitable for an ADC while the internal matched network improves rejection of common-mode pickup. In a software-controlled measurement system, programmable gain allows the same amplifier to handle multiple input ranges without redesigning the analog front end.
When laying out a board around the AD625CDZ, keep the input and feedback-network routing short and symmetrical, provide stable bypass capacitance at the supply pins, and avoid long unprotected traces adjacent to high-current switching nodes. Because the package is a through-hole CDIP rather than a surface-mount package, verify the 16-pin mechanical drawing and pin numbering against the manufacturer datasheet before fabrication. This page combines manufacturer product information, distributor listings, package details, and design guidance for engineers evaluating the AD625CDZ.
Аналоги без доработки для AD625CDZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AD625CDZ (тот же форм-фактор и посадочное место) — отличается по Package, Number of Circuits, Product Type, Maximum Low Nonlinearity, Maximum Offset Voltage.
AD625BDZ
✅ Прямая заменаУточнить цену
Открыть даташит →AD625SD
✅ Прямая заменаУточнить цену
Открыть даташит →AD625BD/+
✅ Прямая заменаУточнить цену
Открыть даташит →AD625AD
✅ Прямая заменаУточнить цену
Открыть даташит →AD625BZ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD625CDZ Максимальные параметры и электрические характеристики
| Device Type | Instrumentation amplifier |
| Number of Circuits | 1 circuit |
| Gain-Bandwidth Product | 25 MHz |
| -3 dB Bandwidth | 650 kHz |
| Slew Rate | 5 V/us |
| Input Bias Current | 10 nA |
| Напряжение питания | +5 V |
| Корпус | 16-CDIP, 0.300 inch pitch, 7.62 mm body |
| Тип монтажа | Through-hole |
| Количество выводов | 16 |
| Product Type | Programmable gain instrumentation amplifier |
| Product Status | Active |
| Статус RoHS | Listed as RoHS on distributor product information |
Руководство по цоколевке AD625CDZ в корпусе 16-cdip, 0.300 inch pitch, 7.62 mm body
Цоколевка для AD625CDZ (корпус 16-cdip, 0.300 inch pitch, 7.62 mm body). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для AD625CDZ.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
AD625CDZ подходит для 6 применениеs: Strain-Gauge and Load-Cell Measurement, Laboratory Data-Acquisition Systems, Industrial Process-Control Front Ends, Medical and Diagnostic Instrumentation, Current-Loop and Low-Level Receiver Circuits, Legacy Instrument Repair and Extension.
Strain-Gauge and Load-Cell Measurement
The AD625CDZ suits bridge-based strain-gauge and load-cell front ends where a small differential signal must be amplified while pickup from the excitation source is rejected. Its 650 kHz -3 dB bandwidth handles relatively fast mechanical or dynamic load events, while the 25 MHz gain-bandwidth product provides headroom for programmable gain settings. The 10 nA input bias current helps limit sensor loading. Use matched routing from the bridge to the input pins and place the amplifier close to the sensor connector to minimize parasitic differential pickup.
Рекомендуется
Laboratory Data-Acquisition Systems
The AD625CDZ is appropriate for laboratory instrumentation that measures low-level differential signals across several programmable input ranges. Programmable gain allows a single analog front end to cover signals that would otherwise require separate amplifier selections, and the 25 MHz gain-bandwidth product supports gain configurations below the device's 650 kHz -3 dB bandwidth. The single +5 V supply simplifies laboratory supply design, while the 16-CDIP package supports through-hole prototyping, repair, and modular instrument construction.
Рекомендуется
Industrial Process-Control Front Ends
The AD625CDZ can condition small differential process signals in industrial measurement equipment where a 5 V analog supply is available. Its instrumentation-amplifier architecture is preferable to a general-purpose op amp when the source includes substantial common-mode voltage or requires matched internal gain resistors. The 650 kHz bandwidth accommodates many process-control signals without entering the high-frequency region where board layout becomes more difficult. Add input protection and isolation as required by the field wiring environment.
Рекомендуется
Medical and Diagnostic Instrumentation
The AD625CDZ can serve as the analog front end in low-level biomedical measurement systems where differential sensing, programmable gain, and low input bias current are important. Its 10 nA input bias current reduces disturbance of high-impedance transducers, while the 650 kHz bandwidth is suitable for many physiological and laboratory signals. The device's through-hole CDIP construction is also useful for legacy medical instruments and serviceable laboratory equipment. Confirm the applicable medical-grade qualification and isolation requirements for the final system.
Рекомендуется
Current-Loop and Low-Level Receiver Circuits
The AD625CDZ is suitable for current receivers that must preserve small differential information while rejecting voltage common to both input terminals. Its low 10 nA input bias current is beneficial when the source impedance is high, and the 25 MHz gain-bandwidth product gives design flexibility across moderate gain settings. Connect the receiver input pair with equal trace lengths and avoid routing them beneath digital or switching circuitry. The 5 V supply architecture keeps the analog rail straightforward in compact measurement modules.
Рекомендуется
Legacy Instrument Repair and Extension
The AD625CDZ is a practical choice for repairing or extending legacy laboratory and industrial instruments that use the AD625 family in a 16-CDIP through-hole footprint. Its listed 650 kHz bandwidth, 5 V/us slew rate, and 10 nA input bias current align with the original AD625 instrumentation-amplifier role. Because the manufacturer marks the AD625 as not recommended for new designs, this application is best treated as a maintenance or installed-base decision. Confirm pin functions, gain configuration, and the required temperature grade before substitution.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AD625CDZ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AD625BDZ | AD625SD | AD625BD | AD625 | AD625BZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP |
| Amplifier Type | Programmable gain instrumentation amplifier | Instrumentation amplifier | Instrumentation amplifier | Instrumentation amplifier | Instrumentation amplifier | Instrumentation amplifier |
| Number of Circuits | 1 | 1 | 1 | 1 | 1 | 1 |
Ключевые отличия
- Integrated programmable-gain instrumentation-amplifier function (против AD625BDZ)
- Through-hole 16-CDIP construction for serviceable legacy equipment (против AD625SD)
- High gain-bandwidth product for programmable measurement gain (против AD625)
Заметки по проектированию
Keep the differential input path short and symmetric. Route the two input conductors as a closely matched pair, terminate unused inputs according to the datasheet recommendations, and avoid placing the pair beside switching-node copper. The 10 nA input bias current is favorable for high-impedance sources, but board leakage and contamination can still be significant, so clean boards and guarded input structures are valuable in precision measurement systems.
The AD625CDZ uses a single +5 V supply. Place the required bypass capacitors immediately adjacent to the supply pins and keep the return path continuous and low impedance. Because the CDIP package has long through-hole leads, excessive bypass capacitance can create undesirable lead inductance; follow the manufacturer datasheet's recommended capacitance and placement rather than adding large capacitors at the device without accounting for stability.
Do not assume that every AD625 ordering suffix is interchangeable. AD625BDZ and AD625SD are documented as 16-CDIP alternatives with the same listed bandwidth and slew rate, but temperature grade, gain configuration, and qualification details must be checked against the exact ordering table. For new designs, note that Analog Devices marks the AD625 as not recommended for new designs and evaluate a currently recommended instrumentation amplifier instead.
The AD625CDZ's 650 kHz -3 dB bandwidth is the practical signal-bandwidth limit, while the 25 MHz gain-bandwidth product describes the internal gain-bandwidth relationship. Avoid treating the higher figure as usable closed-loop measurement bandwidth. Check settling time, slew rate, and gain-dependent bandwidth together when designing multiplexed acquisition paths or driving an ADC.
Информация о соответствии
A distributor product listing identifies AD625CDZ as RoHS. The Analog Devices product page identifies the AD625 as not recommended for new designs. No additional REACH, halogen-free, or conflict-minerals statement was found for the exact ordering suffix.