Analog Devices

AD7472BRZ - 12-Bit 1.5 MSPS ADC | Analog Devices

Артикул: AD7472BRZ ✓ Активен
2.7 V to 5.25 V Vdss 24-lead SOIC Package
MOQ: 1 |

AD7472BRZ Обзор

The Analog Devices AD7472BRZ is a 12-bit, single-channel, successive-approximation analog-to-digital converter with a parallel output interface, conversion throughput up to 1.5 MSPS, and a 24-lead SOIC package. It operates from a single 2.7 V to 5.25 V supply and accepts an analog input range of 0 V to 2.5 V. The low-power architecture supports portable instrumentation, industrial control, sensor acquisition, and data-capture systems where a compact, low-noise ADC is required.

An ADC converts a continuously varying analog voltage into a numerical value for processing by a microprocessor, digital signal processor, or programmable logic. The AD7472 belongs to the successive-approximation, or SAR, ADC family. SAR converters repeatedly compare the sampled input against an internal reference and a weighted capacitor array. This architecture combines predictable latency, direct sampling control, and a parallel data interface without the clock and filtering complexity of a pipeline converter.

Key characteristics of the AD7472 include 12-bit resolution, throughput up to 1.5 MSPS, a single 2.7 V to 5.25 V analog and digital supply, and a 0 V to 2.5 V input range. Conversion is initiated by the falling edge of CONVST, while BUSY indicates that the conversion is in progress. According to the manufacturer product information, BUSY returns low 531.66 ns after the falling CONVST edge when the internal clock operates at 26 MHz. The parallel interface simplifies connection to older DSP and FPGA systems that do not use serial protocols.

Typical power figures depend on supply voltage and throughput. The AD7472 dissipates approximately 3.34 mW at 1.5 MSPS with 3 V supplies and 7.97 mW at 1.75 MSPS with 5 V supplies, as listed in the component datasheet. This operating range makes the converter suitable for battery-powered measurement equipment, where power dissipation affects both run time and thermal design. The industrial temperature option covers -40°C to +85°C.

The AD7472BRZ is used in portable data loggers, process-control modules, industrial sensor interfaces, ultrasonic measurement systems, and embedded acquisition boards. In these systems, the 12-bit code supports measurement of 2.5 V full-scale signals with an input-referred quantization step of approximately 610 µV when the full 0 V to 2.5 V range is used. External reference and input conditioning circuitry remain important when accuracy, common-mode rejection, or overrange behavior must be controlled.

For implementation, route the analog input and reference paths away from digital switching nodes, place input and reference decoupling capacitors close to their associated pins, and use a short, symmetric digital-output routing pattern. Check the acquisition timing against the 531.66 ns conversion indication and the receiving device setup time. Request a quote on this page for current commercial availability, lead time, and orderable quantities.

Аналоги без доработки для AD7472BRZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

AD7472ARZ

✅ Прямая замена
📦 24-lead SOIC
Same AD7472 12-bit SAR ADC and 24-lead SOIC format; the ordering suffix indicates a different grade, with no resolution or architecture change

📋 Справочный аналог (нет в каталоге)

AD7470ARZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 24-lead SOIC
Same AD7470/AD7472 SAR family and 24-lead SOIC format, but resolution is 10 bit rather than 12 bit, a 16.7% reduction

📋 Справочный аналог (нет в каталоге)

AD7470BRZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 24-lead SOIC
Same SAR converter family and 24-lead SOIC package, but 10-bit resolution versus 12 bit and a maximum rate of 1.75 MSPS versus 1.5 MSPS

📋 Справочный аналог (нет в каталоге)

AD7472BRZ Максимальные параметры и электрические характеристики

Разрешение 12 bit
Частота дискретизации 1.5 MSPS
Architecture Successive approximation (SAR)
Number of Inputs 1 single-ended input
Supply Voltage Range 2.7 V to 5.25 V
Analog Input Range 0 V to 2.5 V
Output Interface 12-bit parallel
Conversion Start Falling edge of CONVST
Conversion Busy Time 531.66 ns at a 26 MHz clock
Power Dissipation at 1.5 MSPS 3.34 mW typical with a 3 V supply
Power Dissipation at 1.75 MSPS 7.97 mW typical with a 5 V supply
Корпус 24-lead SOIC
Число выводов 24 pins
Рабочая температура -40°C to +85°C
Screening Level Industrial
Тип монтажа Surface mount

Руководство по цоколевке AD7472BRZ в корпусе 24-lead soic

Цоколевка для AD7472BRZ (корпус 24-lead soic). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 24-lead soic для AD7472BRZ

Нет подробных данных о распиновке для AD7472BRZ.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

AD7472BRZ подходит для 6 применениеs: Industrial Sensor Signal Acquisition, Portable Battery-Powered Measurement, Process-Control and Monitoring Loops, DSP-Based Data Acquisition, Ultrasonic and Time-Based Measurement, Embedded Test and Measurement.

🏭

Industrial Sensor Signal Acquisition

The AD7472BRZ suits industrial sensor channels that produce conditioned, single-ended voltages below 2.5 V. Its 12-bit resolution captures 4096 discrete levels across the 0 V to 2.5 V input range, while throughput up to 1.5 MSPS supports rapid periodic sampling. Place the converter close to the conditioning amplifier to minimize pickup from motor-control and switching circuits. The -40°C to +85°C industrial temperature option supports factory equipment, although the front-end amplifier, protection network, and reference must independently satisfy the required accuracy and common-mode range.

📱

Portable Battery-Powered Measurement

A 3.34 mW typical power figure at 1.5 MSPS with a 3 V supply makes the AD7472BRZ practical for portable measurement instruments. The single 2.7 V to 5.25 V supply range allows operation directly from a regulated 3 V rail, and the SAR architecture provides deterministic acquisition timing without a pipeline settling cycle. Power the analog section from a quiet regulator and disable or slow sampling when the application does not require continuous updates. This improves run time while preserving 12-bit data for battery-based loggers and field-service instruments.

⚡

Process-Control and Monitoring Loops

The AD7472BRZ can digitize fast process variables for feedback control, monitoring, and fault detection. The 1.5 MSPS sampling rate provides up to 667 microseconds between samples, and the falling-edge CONVST input allows sampling to be aligned with an external trigger. A parallel interface connects efficiently to industrial controllers and DSP modules. Control-loop performance still depends on the acquisition loop latency, digital filtering, isolation requirements, and the accuracy of the upstream sensor and signal-conditioning stages.

🖥️

DSP-Based Data Acquisition

The AD7472BRZ is appropriate for DSP acquisition cards because its 12-bit parallel output exposes the complete conversion result without a serial deserializer. The controller can read the data bus after BUSY indicates conversion completion, then apply digital filtering, calibration, or spectral analysis. With the internal clock at 26 MHz, BUSY falls 531.66 ns after the falling CONVST edge according to the datasheet. Confirm receiver setup and hold timing, and keep the 12 output traces short enough to preserve signal integrity at the operating clock rate.

📡

Ultrasonic and Time-Based Measurement

Periodic ultrasonic or time-of-flight measurements benefit from a converter with direct conversion-start control and a deterministic busy interval. The AD7472BRZ samples on the falling edge of CONVST and can reach 1.5 MSPS, allowing dense point sets to be captured when the analog front end provides adequate bandwidth and dynamic range. Use CONVST for coherent sampling and trigger timing. Keep the analog path short and place the input decoupling network close to the converter to reduce timing errors that would otherwise shift the apparent arrival time.

🔧

Embedded Test and Measurement

The AD7472BRZ can digitize low-level test signals in embedded instrumentation, waveform monitors, and automated test equipment. Its 12-bit resolution improves measurement granularity compared with a 10-bit converter, while the compact 24-lead SOIC simplifies board construction. The parallel output requires enough digital I/O on the controller, so a multiplexing device or dedicated acquisition controller may be needed in compact systems. Establish calibration against the precision reference, include gain and offset correction in firmware, and verify input bandwidth before increasing the sampling rate.

What is the AD7472BRZ?
The AD7472BRZ is a 12-bit, single-channel SAR analog-to-digital converter from Analog Devices that delivers conversion throughput up to 1.5 MSPS through a parallel interface. It operates from a single 2.7 V to 5.25 V supply, accepts a 0 V to 2.5 V analog input, and is packaged in a 24-lead SOIC. According to the Analog Devices AD7472 product page, it is intended for low-power, high-speed data-acquisition systems.
What is the sampling rate of the AD7472BRZ?
The AD7472BRZ has a maximum sampling rate of 1.5 MSPS with 12-bit resolution. The Analog Devices AD7472 product information identifies the AD7472 as the 12-bit member of the AD7470/AD7472 family, while the 10-bit AD7470 supports throughput up to 1.75 MSPS. The sample rate describes how quickly the converter can acquire new analog values; the usable signal bandwidth should also be checked against the acquisition architecture.
What is the operating voltage of AD7472BRZ?
The AD7472BRZ operates from a single 2.7 V to 5.25 V supply. This range covers common 3 V and 5 V system rails without requiring separate analog and digital supply planes. The manufacturer product page identifies the AD7470 and AD7472 as single-supply converters, while the component specifications list the analog input range as 0 V to 2.5 V.
How does the AD7472BRZ start a conversion?
The AD7472BRZ starts conversion on the falling edge of the CONVST input, and the input is sampled at that same edge. The manufacturer datasheet describes BUSY rising at the start of conversion and falling 531.66 ns after the falling CONVST edge when the clock frequency is 26 MHz. Use that indication to determine when the parallel output can be sampled reliably.
What interface does the AD7472BRZ use?
The AD7472BRZ uses a 12-bit parallel output interface. Its 12 output lines allow the conversion result to be read directly by a microprocessor, DSP, FPGA, or other digital controller. The AD7472 product information identifies this parallel-interface architecture as useful for direct interfacing with digital processors and DSP-based measurement equipment.
How much power does the AD7472BRZ consume?
The AD7472BRZ dissipates approximately 3.34 mW at 1.5 MSPS with a 3 V supply, according to the component datasheet specifications. At a 5 V supply and 1.75 MSPS operating condition, the listed typical power dissipation is 7.97 mW. These figures make the converter appropriate for low-power portable and embedded acquisition systems where converter efficiency affects battery run time.
Where can I download the AD7472BRZ datasheet PDF?
The official AD7472 datasheet and product information are available from the Analog Devices product page at https://www.analog.com/en/products/ad7472.html. The linked manufacturer document describes the AD7470/AD7472 family, electrical characteristics, pin assignments, operating principles, and application information. Use the manufacturer's ordering guide to confirm the exact AD7472BRZ package and temperature designation.
Where can I find the AD7472BRZ pinout?
The AD7472BRZ pin assignments are shown in the pin-description and package-drawing sections of the manufacturer datasheet. The part uses a 24-lead SOIC with the analog input, supply, reference, conversion-control, clock, busy, and 12 parallel data-output functions distributed across the package. Assign PCB tracks from the datasheet pin table rather than from a generic SOIC-24 drawing.
What can replace the AD7472BRZ?
The AD7472ARZ is the closest same-family drop-in candidate identified for the AD7472BRZ because both are 12-bit AD7472 devices in the 24-lead SOIC format. It can replace the AD7472BRZ when its operating-temperature grade and ordering suffix are acceptable for the design. Confirm every electrical limit, temperature grade, and lifecycle status against the manufacturer datasheets before committing to the substitution.
Is the AD7472ARZ a drop-in replacement for the AD7472BRZ?
The AD7472ARZ is a same-family AD7472 option in a compatible 24-lead SOIC package, but it should be treated as a candidate rather than an automatic substitution. The suffix can denote a different temperature grade, and the ordering information must be checked to confirm whether the electrical ratings and qualification level match the original board. Validate the pin functions, supply limits, acquisition timing, and operating-temperature requirements before replacing the AD7472BRZ.
What is the best Analog Devices equivalent for the AD7472BRZ?
The best direct same-family candidate is the AD7472ARZ, because it belongs to the 12-bit AD7472 line and appears in component cross-reference results for the AD7472BRZ. The AD7470BRZ is a lower-resolution 10-bit alternative in the same converter family, while the AD7472ARZ preserves the original 12-bit conversion resolution. Both alternatives still require package, pin, and temperature-grade verification.
AD7472BRZ vs AD7470BRZ - which is better for precision measurement?
Choose the AD7472BRZ when 12-bit resolution is more important than maximum throughput because it delivers one additional resolution bit over the 10-bit AD7470BRZ. The AD7470BRZ can reach up to 1.75 MSPS, while the AD7472 reaches up to 1.5 MSPS. The choice therefore depends on whether the measurement loop requires finer quantization at a slightly lower sampling rate or the highest possible acquisition speed.
When should I choose the AD7472BRZ over a lower-resolution ADC?
Choose the AD7472BRZ when the analog signal contains meaningful detail above the quantization level of a 10-bit converter or when 12-bit data is required by downstream calibration. Its 1.5 MSPS throughput remains suitable for many sensor, control, and instrumentation channels. Prefer a lower-resolution device only when the application is limited by signal bandwidth, interface cost, or power rather than measurement resolution.
Is the AD7472BRZ suitable for industrial sensor acquisition?
The AD7472BRZ is suitable for many industrial sensor-acquisition applications because it combines a 0 V to 2.5 V input range, 12-bit resolution, and a -40°C to +85°C industrial temperature option. It works especially well with conditioned outputs from sensors that already provide a low-voltage, single-ended signal. The analog front end must still control gain, bandwidth, grounding, and protection independently of the converter.
Where can I buy the AD7472BRZ and what is the lead time?
Use the Request a Quote form on this page to ask about current AD7472BRZ pricing, stock, minimum order quantity, and lead time. The manufacturer lists the AD7472 family as a 12-bit, high-speed, low-power SAR ADC in a 24-lead SOIC. Commercial availability and production timing can change, so confirm the orderable suffix and current lifecycle position when placing a production order.
Is the AD7472BRZ in stock?
Current AD7472BRZ inventory should be confirmed through the Request a Quote form on this page rather than inferred from an indexed product listing. The part is identified as a 24-lead SOIC, 12-bit, 1.5 MSPS ADC from Analog Devices, and it is listed by multiple component distributors. Submit your required quantity, target date, and acceptable packing method to obtain a current availability response.

Справочные инженерные данные для AD7472BRZ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the AD7472BRZ when the design requires 12-bit quantization, a parallel data interface, and deterministic conversion-start control from a single 2.7 V to 5.25 V supply. The AD7472ARZ is the closest same-family substitute when its exact temperature grade and ordering suffix satisfy the production requirements. Consider the AD7470BRZ or AD7470ARZ only when 10-bit resolution is acceptable: both can reach 1.75 MSPS, but they provide 1024 quantization levels rather than the AD7472's 4096. For a new design, compare total acquisition-channel power, reference accuracy, required analog bandwidth, and controller I/O availability rather than selecting on sampling rate alone. A substitute should not be used without checking the manufacturer datasheets for pin functions, temperature range, supply limits, timing, and lifecycle status.

Сравнение с аналогами

Параметр Этот товар AD7472ARZ AD7470ARZ AD7470BRZ
Package 24-lead SOIC 24-lead SOIC 24-lead SOIC 24-lead SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Resolution 12 bit 12 bit 10 bit 10 bit
Maximum Throughput 1.5 MSPS 1.5 MSPS 1.75 MSPS 1.75 MSPS
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V
Analog Input Range 0 V to 2.5 V 0 V to 2.5 V 0 V to 2.5 V 0 V to 2.5 V
Architecture Successive approximation, 1 input Successive approximation, 1 input Successive approximation, 1 input Successive approximation, 1 input
Output Interface 12-bit parallel 12-bit parallel 10-bit parallel 10-bit parallel

Ключевые отличия

  • Higher resolution within the AD7470/AD7472 family (против AD7470BRZ)
  • Direct same-family package-compatible option (против AD7472ARZ)
  • Balanced resolution and acquisition speed (против AD7470ARZ)

Заметки по проектированию

Route the analog input directly to the converter and place its decoupling capacitor next to the corresponding supply or reference pins. Keep the input trace short and place the sensor or amplifier output driver close enough to avoid loading the input network. Digital output traces may be longer than the analog trace, but route them away from the reference and input nodes to reduce conversion errors.

Use BUSY as the primary indication that the 12 parallel output bits are valid, and account for the documented 531.66 ns conversion interval at a 26 MHz internal clock. Confirm the receiving device setup and hold requirements in the system timing budget. A synchronous interface using CONVST and BUSY is preferable to polling the data bus independently of the conversion state.

Do not treat the 0 V to 2.5 V analog input range as permission to exceed it during transients or startup. Use suitable clamping and source-impedance limits, and verify the source settling time against the acquisition requirements. Also verify that any substitute retains the same supply range, pin functions, resolution, temperature grade, and acquisition timing before populating it on an existing board.

Estimated power consumption is 3.34 mW at 1.5 MSPS with a 3 V supply, using the datasheet value directly rather than a derived junction-temperature calculation. In a portable instrument, reduce the conversion rate when continuous full-speed sampling is unnecessary and power the analog section from a low-noise supply. Account for reference and signal-conditioning power when calculating the complete acquisition-channel budget.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The component is identified as an industrial-temperature 24-lead SOIC ADC. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification data are not stated in the manufacturer product information excerpt, so these fields remain unknown.

Данные проверены: 2026-11-18 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

AD7472BRZ datasheet AD7472BRZ datasheet pdf AD7472BRZ pinout AD7472BRZ specifications AD7472BRZ equivalent AD7472BRZ replacement AD7472BRZ drop-in substitute AD7472BRZ vs AD7472ARZ AD7472BRZ vs AD7470BRZ Analog Devices AD7472BRZ AD7472 12-bit 1.5 MSPS ADC AD7472 SOIC-24 parallel ADC AD7472 sensor acquisition application AD7472BRZ price and stock

Связанные компоненты & термины

Analog Devices AD7472BRZ AD7472ARZ AD7470ARZ AD7470BRZ analog-to-digital converter ADC successive-approximation ADC SAR 12-bit resolution 1.5 MSPS parallel output interface CONVST BUSY single-supply operation 2.7 V to 5.25 V supply 0 V to 2.5 V analog input SOIC-24 SOIC package family surface-mount package industrial temperature grade sensor signal acquisition process control precision reference
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ