AD9364BBCZ - 70MHz-6GHz RF Agile Transceiver | Analog Devices
Артикул: AD9364BBCZ ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $89.5 | $89,50 |
| 10 | $82.3 | $823,00 |
| 100 | $74.1 | $7.410,00 |
| 500 | $66.9 | $33.450,00 |
| 1.000 | $59.7 | $59.700,00 |
AD9364BBCZ Обзор
An RF transceiver is a device that both transmits and receives radio frequency signals, integrating the RF front end, mixed-signal baseband, and frequency synthesis in a single IC. It sits between the antenna and the digital baseband processor in a communication system, converting RF signals to digital baseband and vice versa. The AD9364 is part of the RF Agile Transceiver family, which includes the AD9361 and AD9363, and is designed for software-defined radio (SDR) applications.
Key features include wide frequency coverage (70 MHz to 6 GHz), programmable channel bandwidth (200 kHz to 56 MHz), integrated synthesizers, and a configurable digital interface. The device supports FDD and TDD modes, and includes auxiliary ADC/DACs for monitoring and control. Its high integration reduces external component count and board space, making it ideal for compact base station designs.
The AD9364 uses a direct-conversion architecture with integrated filters and gain control, providing excellent linearity and sensitivity. It includes a dual-channel receiver and transmitter, with support for MIMO configurations when paired with multiple devices. The device is programmable via a 3- or 4-wire SPI interface, allowing dynamic reconfiguration of frequency, gain, and filter settings.
Typical applications include 3G/4G base stations, software-defined radio, point-to-point microwave links, and test and measurement equipment. Its wide frequency range and bandwidth flexibility make it suitable for both licensed and unlicensed band operation.
When designing with the AD9364, careful attention must be paid to power supply decoupling and RF layout to achieve optimal performance. The device requires multiple supply rails and a clean reference clock. Proper grounding and shielding are essential to minimize noise and interference.
Аналоги без доработки для AD9364BBCZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AD9364BBCZ (тот же форм-фактор и посадочное место) — отличается по Interface, Number of Channels, Channel Bandwidth, Frequency Range, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
AD9361BBCZ
✓ В наличии
$62 / шт.
Открыть даташит →ADRV9002BBCZ
✓ В наличии
$210 / шт.
Открыть даташит →ADRV9004BBCZ
✓ В наличии
$90 / шт.
Открыть даташит →AD9375BBCZ
✓ В наличии
$295 / шт.
Открыть даташит →AD9363ABCZ
📋 Справочный аналог (нет в каталоге)
AD9364BBCZ Характеристики
| Type | RF Transceiver |
| Frequency Range | 70 MHz to 6 GHz |
| Channel Bandwidth | 200 kHz to 56 MHz |
| Number of Channels | 1x1 (2 receive, 2 transmit) |
| Корпус | 144-LFBGA, CSPBGA |
| Тип монтажа | Surface Mount |
| Диапазон рабочих температур | -40°C to +85°C |
| Напряжение питания | 1.3V, 2.5V, 3.3V |
| Интерфейс | SPI, CMOS/LVDS |
| RF Input/Output | Differential |
| Статус RoHS | Compliant |
Конфигурация выводов AD9364BBCZ
| Контакт A1 | VSSA — Analog ground |
| Контакт A2 | VSSA — Analog ground |
| Контакт B1 | RX1P — Receiver 1 positive input |
| Контакт B2 | RX1N — Receiver 1 negative input |
| Контакт C1 | TX1P — Transmitter 1 positive output |
| Контакт C2 | TX1N — Transmitter 1 negative output |
| Контакт D1 | VDD — Power supply |
| Контакт D2 | GND — Ground |
| Контакт E1 | SPI_CLK — SPI clock |
| Контакт E2 | SPI_ENB — SPI enable |
| Контакт F1 | SPI_DI — SPI data input |
| Контакт F2 | SPI_DO — SPI data output |
Типичное применение
AD9364BBCZ подходит для 6 применениеs: 3G/4G Base Stations, Software-Defined Radio (SDR), Point-to-Point Microwave Links, Test and Measurement Equipment, Military and Aerospace Communications, IoT and Smart Grid.
3G/4G Base Stations
The AD9364BBCZ is designed for 3G and 4G base station applications, providing a highly integrated RF transceiver solution. Its wide frequency range (70 MHz to 6 GHz) and programmable channel bandwidth (up to 56 MHz) support various cellular standards. The device's integrated synthesizers and configurable digital interface simplify the design, reducing component count and board space. Its high linearity and sensitivity ensure reliable communication in demanding environments. The 1x1 configuration is ideal for small cells and remote radio heads, where size and power efficiency are critical. The AD9364's programmability allows dynamic reconfiguration to adapt to different frequency bands and bandwidths, making it a versatile choice for multi-standard base stations.
Рекомендуется
Software-Defined Radio (SDR)
The AD9364BBCZ is ideal for software-defined radio (SDR) applications due to its wide frequency coverage and programmable bandwidth. It enables a single hardware platform to support multiple communication standards by reconfiguring the RF parameters via SPI. The integrated synthesizers and mixed-signal baseband simplify the design, allowing a compact SDR module. Its 1x1 configuration is suitable for portable and low-power SDR devices. The device's high dynamic range and low noise figure ensure good performance in congested spectrum environments. The AD9364's ability to operate from 70 MHz to 6 GHz covers HF, VHF, UHF, and microwave bands, making it a flexible choice for military, amateur, and commercial SDR systems.
Рекомендуется
Point-to-Point Microwave Links
The AD9364BBCZ is well-suited for point-to-point microwave links, offering a wide frequency range up to 6 GHz and channel bandwidths up to 56 MHz. Its integrated synthesizers provide precise frequency generation, essential for reliable microwave communication. The device's high linearity and low phase noise contribute to excellent error vector magnitude (EVM) performance. The 1x1 configuration is ideal for single-carrier links, while multiple devices can be used for higher capacity. The AD9364's small footprint and low power consumption make it suitable for outdoor units where space and thermal constraints are tight. Its programmable features allow adaptation to different link distances and data rates.
Рекомендуется
Test and Measurement Equipment
The AD9364BBCZ is used in test and measurement equipment such as spectrum analyzers, signal generators, and channel emulators. Its wide frequency range and programmable bandwidth allow it to generate and analyze signals across multiple bands. The integrated synthesizers enable precise frequency tuning, while the configurable digital interface facilitates integration with FPGAs and processors. The device's high dynamic range and low noise are critical for accurate measurements. The 1x1 configuration is suitable for single-channel instruments, and multiple devices can be combined for multi-channel analysis. The AD9364's programmability allows it to emulate various communication standards, making it a versatile tool for R&D and production testing.
Рекомендуется
Military and Aerospace Communications
The AD9364BBCZ is suitable for military and aerospace communications due to its wide frequency coverage and robust performance. It operates from 70 MHz to 6 GHz, covering many tactical communication bands. The device's high linearity and low noise figure ensure reliable communication in harsh environments. Its small size and low power consumption are advantageous for portable and airborne platforms. The AD9364's programmability allows secure frequency hopping and adaptive modulation. The 1x1 configuration is ideal for single-channel radios, while multiple devices can support MIMO and diversity. The device's integrated synthesizers reduce external component count, enhancing reliability.
Рекомендуется
IoT and Smart Grid
The AD9364BBCZ can be used in IoT and smart grid applications that require wideband communication. Its frequency range up to 6 GHz supports various IoT bands, including sub-GHz and 2.4 GHz. The device's low power consumption is suitable for battery-powered IoT devices. The programmable channel bandwidth allows adaptation to different data rates and standards. The integrated synthesizers simplify frequency planning, and the configurable digital interface connects easily to microcontrollers. The 1x1 configuration is cost-effective for single-channel IoT gateways. The AD9364's high sensitivity ensures reliable communication in noisy environments, making it suitable for smart grid monitoring and control.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AD9364BBCZ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AD9361BBCZ | AD9363ABCZ | ADRV9002BBCZ | ADRV9004BBCZ | AD9375BBCZ |
|---|---|---|---|---|---|---|
| Package | 144-LFBGA, CSPBGA | 144-LFBGA, CSPBGA | 144-LFBGA, CSPBGA | 144-LFBGA, CSPBGA | 144-LFBGA, CSPBGA | 196-BGA |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Frequency Range | 70 MHz to 6 GHz | 70 MHz to 6 GHz | 325 MHz to 3.8 GHz | 75 MHz to 6 GHz | 75 MHz to 6 GHz | 300 MHz to 6 GHz |
| Channel Bandwidth | 200 kHz to 56 MHz | 200 kHz to 56 MHz | 200 kHz to 20 MHz | 12 kHz to 40 MHz | 12 kHz to 40 MHz | 20 MHz to 100 MHz |
| Number of Channels | 1x1 (2 RX, 2 TX) | 2x2 (2 RX, 2 TX) | 1x1 (2 RX, 2 TX) | 2x2 (2 RX, 2 TX) | 1x1 (2 RX, 2 TX) | 2x2 (2 RX, 2 TX) |
| Pin Compatibility | Reference | No | No | No | No | No |
| Supply Voltage | 1.3V, 2.5V, 3.3V | 1.3V, 2.5V, 3.3V | 1.3V, 2.5V, 3.3V | 1.0V, 1.8V, 3.3V | 1.0V, 1.8V, 3.3V | 1.0V, 1.8V, 3.3V |
| RoHS | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
Ключевые отличия
- Wide frequency range from 70 MHz to 6 GHz (против AD9363ABCZ)
- 1x1 configuration with 2 receive and 2 transmit paths (против AD9361BBCZ)
- Integrated synthesizers and configurable digital interface (против ADRV9002BBCZ)
Заметки по проектированию
The AD9364BBCZ requires multiple supply rails (1.3V, 2.5V, 3.3V). Use low-noise LDOs or switching regulators with proper filtering. Ensure each rail is decoupled with 100nF and 10uF capacitors close to the pins. Power sequencing is critical; refer to the datasheet for recommended sequence to avoid latch-up.
For optimal RF performance, use a 4-layer PCB with a solid ground plane. Place the AD9364 on a dedicated RF section with controlled impedance traces for RF inputs/outputs. Keep digital and analog grounds separate and connect at a single point. Use via stitching around the RF traces to minimize parasitic inductance.
The AD9364BBCZ has a 144-ball LFBGA package. Ensure adequate thermal relief for the exposed pad (if any) and provide a thermal via array to the ground plane. Route SPI signals away from RF traces to prevent digital noise coupling. Maintain proper clearance between high-speed digital lines and sensitive analog inputs.
Информация о соответствии
RoHS compliant per distributor listings. Other compliance data not specified in provided sources.
