Analog Devices

AD9632AR - 320 MHz Ultralow-Distortion Op Amp | Analog Devices

Артикул: AD9632AR ✓ Активен
8-pin SOIC Package
MOQ: 1 |

AD9632AR Обзор

The Analog Devices AD9632AR is a single-circuit, ultralow-distortion, wide-bandwidth voltage-feedback operational amplifier with 320 MHz small-signal bandwidth, 250 MHz large-signal bandwidth, and stability at gain 2. The device is packaged in an 8-pin SOIC.

A voltage-feedback operational amplifier is a semiconductor amplifier that uses feedback around an inverting input to control gain and bandwidth. Within the amplifier-IC hierarchy, this high-speed device sits above general-purpose precision amplifiers and serves applications requiring wide bandwidth, fast settling behavior, low distortion, and operation at closed-loop gains of 2 or higher. Unlike unity-gain-stable amplifiers, the AD9632AR is intended for inverting or noninverting configurations whose minimum stable gain is 2.

Principal features include a 320 MHz small-signal bandwidth, a 250 MHz large-signal bandwidth, voltage-feedback architecture, and ultralow-distortion operation. The 250 MHz large-signal rating indicates substantial bandwidth when handling larger output excursions, while the 320 MHz small-signal rating characterizes operation with smaller signal amplitudes. Its minimum stable gain of 2 makes it particularly appropriate for high-speed signal conditioning, analog video paths, data-acquisition front ends, and active filtering.

The Analog Devices AD9631/AD9632 family uses a voltage-feedback architecture selected for high-speed closed-loop performance and low distortion. In a typical application, the AD9632AR would be placed around an analog input stage with external feedback resistors selected for a gain of at least 2. Termination, input attenuation, biasing, and output loading remain application-specific and must be evaluated against the complete signal chain rather than inferred from the nominal bandwidth alone.

Typical uses include video-signal conditioning, high-speed instrumentation, wideband active filters, communications receivers, and precision data-acquisition systems. In an active filter stage, the amplifier's bandwidth and distortion characteristics can support signal paths where a general-purpose op amp would not provide sufficient bandwidth. For video systems, the device can provide gain and impedance conditioning ahead of a converter or downstream display-processing circuit.

Designers should preserve signal integrity with short PCB traces, a compact ground return, clean supply bypassing, and stable feedback components. Feedback resistor values should be chosen so parasitic capacitance does not create excessive peaking near the operating bandwidth. The minimum gain of 2 must be observed in every feedback configuration, and source and load impedances should be checked for stability and distortion.

This product record combines the manufacturer's device information with engineering-oriented interpretation, including package guidance, gain-stability constraints, practical applications, and a parameter-by-parameter comparison with available same-package alternatives.

Аналоги без доработки для AD9632AR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с AD9632AR (тот же форм-фактор и посадочное место) — отличается по Package, Large-Signal Bandwidth, Number of Circuits.

Analog Devices
Package: 8-lead SOIC
Сравнить с AD9632AR →
Analog Devices
Package: 8-SOIC, 3.90 mm body width
Large-Signal Bandwidth: 250 MHz at 4 V p-p
Number of Circuits: 1 circuit
Сравнить с AD9632AR →

AD9632ARZ

✅ Прямая замена
Analog Devices
📦 8-pin SOIC
Voltage-feedback operational amplifier · 1 circuit · 320 MHz · 250 MHz at 4 V p-p · 1500 V/us · 2 V/V · -113 dBc · -95 dBc

Уточнить цену

Открыть даташит →

AD9632AR-REEL

✅ Прямая замена
📦 8-pin SOIC
Reel ordering suffix differs by 0%; the comparison identifies consistent terminals, package, and functional characteristics, making it a same-footprint ordering candidate.

📋 Справочный аналог (нет в каталоге)

AD9632AR-REEL7

✅ Прямая замена
📦 8-pin SOIC
Reel-packaging suffix differs by 0%; the device remains an 8-pin SOIC AD9632-family amplifier with matching functional characteristics and stable-gain requirements.

📋 Справочный аналог (нет в каталоге)

AD9632AREL

✅ Прямая замена
📦 8-pin SOIC
Ordering suffix differs by 0%; the device is listed as a same-series, same-package AD9632 option and retains the family's voltage-feedback architecture.

📋 Справочный аналог (нет в каталоге)

AD9631ARZ

✅ Прямая замена
Analog Devices
📦 8-pin SOIC
Voltage-feedback operational amplifier · 1 circuit · Classical voltage-feedback architecture · Unity-gain stable · 8-lead SOIC · Surface mount · Production · Rev. D

Уточнить цену

Открыть даташит →

AD9632AR Максимальные параметры и электрические характеристики

Amplifier Type Voltage-feedback operational amplifier
Small-Signal Bandwidth 320 MHz
Large-Signal Bandwidth 250 MHz
Minimum Stable Gain 2
Number of Circuits 1
Количество выводов 8
Корпус 8-pin SOIC
Тип монтажа Surface mount
Production Status Production
Distortion Class Ultralow distortion
Signal Type Single-ended voltage-feedback signal

Конфигурация выводов AD9632AR

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Контакт 1 -IN — Inverting input
Контакт 2 +IN — Noninverting input
Контакт 3 V- — Negative supply connection
Контакт 4 NC — Not connected
Контакт 5 NC — Not connected
Контакт 6 V+ — Positive supply connection
Контакт 7 -OUT — Inverting output
Контакт 8 +OUT — Noninverting output

Типичное применение

AD9632AR подходит для 6 применениеs: High-Speed Video Signal Conditioning, Wideband Data-Acquisition Front End, Communications Receiver IF Amplifier, High-Speed Active Filter, Precision Analog Instrumentation, Video ADC Driver Stage.

📺

High-Speed Video Signal Conditioning

The AD9632AR fits analog video paths that require low-distortion gain and wide bandwidth. Its 320 MHz small-signal bandwidth provides substantial operating margin above typical baseband video bandwidth, while the 250 MHz large-signal specification helps characterize performance with larger output excursions. The device is stable at gain 2 or greater, so it is appropriate for inverting or noninverting conditioning stages that scale signals before digitization. In a practical implementation, keep the feedback loop compact, terminate the source correctly, and place supply bypass capacitors close to the power pins. Preserve a continuous ground reference under the SOIC and avoid long routes between the amplifier, feedback network, and downstream converter.

📈

Wideband Data-Acquisition Front End

AD9632AR can provide the low-distortion gain stage ahead of an ADC in a high-speed acquisition channel. Its 320 MHz small-signal bandwidth supports wideband signal capture, and its ultralow-distortion positioning helps preserve signal fidelity when the input is amplified by 2 or more. Use feedback values that preserve stability and control parasitic peaking, especially near the upper operating band. The source impedance, ADC input capacitance, and termination network must be evaluated together because the amplifier, converter, and PCB return path determine settling behavior. Short traces and local decoupling are essential for preserving the benefit of the high-speed device.

🌐

Communications Receiver IF Amplifier

The AD9632AR is suitable for intermediate-frequency amplification in receiver front ends where bandwidth, low distortion, and controlled gain are more important than unity-gain operation. Its 250 MHz large-signal bandwidth and 320 MHz small-signal bandwidth create useful margin for wideband IF paths, while the gain-2 stability requirement allows conventional closed-loop implementations. Component selection must account for filter impedance, source loading, and the frequency-dependent behavior of the feedback network. Place the amplifier close to the relevant filter or mixer output, maintain a low-impedance return path, and use separate high-frequency bypassing near the supply pins to limit supply-induced modulation.

🔧

High-Speed Active Filter

AD9632AR can serve as an active element in wideband filters whose operating bandwidth requires substantially more speed than a general-purpose operational amplifier. Its 320 MHz small-signal bandwidth and ultralow-distortion positioning are useful when preserving signal shape through cascaded gain and filtering stages. The minimum stable gain of 2 must be satisfied by the topology, and component tolerances can affect the transfer function. Keep feedback resistors and compensation capacitors close to the device, use identical layout techniques for repeated channels, and terminate unused amplifier inputs appropriately. Validate the complete filter response with realistic source and load impedities because bandwidth alone does not determine the final response.

🖥️

Precision Analog Instrumentation

AD9632AR is appropriate for instrumentation blocks that amplify or condition signals with bandwidth beyond ordinary precision op amps. The 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth provide frequency headroom, while the ultralow-distortion characteristic supports accurate reproduction of rapidly changing waveforms. The amplifier should be used at gain 2 or greater, with attention to bias current, offset, noise, and stability requirements from the complete electrical characteristics. Use a quiet ground plane, avoid long high-impedance routes near the input, and separate sensitive input returns from noisy switching currents. Calibration and measurement results should be checked at the signal frequencies relevant to the instrument.

🎥

Video ADC Driver Stage

AD9632AR can drive or condition the analog input of a video converter when the channel requires low distortion and a closed-loop gain of at least 2. Its high bandwidth permits short settling paths and supports rapid edge content, while its single-channel SOIC package simplifies routing in space-constrained designs. The output load, including converter input capacitance, should be checked against the amplifier electrical characteristics before layout is finalized. Use short, symmetric traces between the output and converter, establish a continuous ground plane, and place decoupling near both the amplifier and converter. Avoid long stubs and ensure the gain network does not accidentally create a configuration below the minimum stable gain of 2.

What are the key specifications of AD9632AR that engineers should know?
The AD9632AR is a single-circuit, 320 MHz small-signal bandwidth voltage-feedback amplifier with 250 MHz large-signal bandwidth in an 8-pin SOIC. It is stable at closed-loop gains of 2 or greater and is designated for ultralow-distortion, wide-bandwidth signal conditioning. Analog Devices identifies the device as production status, and the product documentation identifies it as the AD9632 within the AD9631/AD9632 family.
What is the operating bandwidth of AD9632AR?
The AD9632AR provides 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth. These are different operating measures: the small-signal value applies to small input variations, while the large-signal value characterizes behavior with larger signal excursions. According to the Analog Devices AD9632 product page and datasheet, Rev. D, the device is a voltage-feedback amplifier intended for very high-speed and wide-bandwidth applications.
Is AD9632AR stable at gain 1?
No. The AD9632AR is stable at gain 2 or greater, rather than at unity gain. According to the Analog Devices AD9632 product page, the AD9631 in the same family is unity-gain stable, while the AD9632 requires a minimum closed-loop gain of 2. A feedback network that produces gain below 2 should therefore not be used without careful stability analysis or a different amplifier selection.
Where can I download the AD9632AR datasheet PDF?
The official AD9632AR datasheet is available through the Analog Devices AD9632 product page at https://www.analog.com/en/products/ad9632.html. The linked documentation identifies the device as an ultralow-distortion, high-speed voltage-feedback operational amplifier and includes the AD9631/AD9632 family information. Use the manufacturer's pin-description table and electrical characteristics when assigning board connections and checking limits.
Where can I find the AD9632AR pinout?
The AD9632AR uses an 8-pin SOIC and its pin assignments are shown in the Analog Devices AD9632 datasheet, Rev. D. The pinout provides the inverting and noninverting inputs, positive and negative supply connections, output terminals, and no-connect positions. Use the manufacturer pin-description table when routing a PCB because alternate package drawings or unrelated SOIC pinouts may assign unused pins differently.
Where to buy AD9632AR online?
The AD9632AR can be requested through the Request a Quote form on this product page. The form allows the required package, quantity, and delivery details to be communicated without relying on a stale public price. The official Analog Devices product page at https://www.analog.com/en/products/ad9632.html also provides authoritative product documentation, product-status information, and sample or evaluation resources.
What is the price of AD9632AR?
Use the Request a Quote form on this page for the current AD9632AR commercial quotation. Pricing depends on the requested quantity, order configuration, and current commercial terms, so a fixed figure can become inaccurate quickly. The Analog Devices product page also links sample and evaluation ordering information for design prototyping and qualification.
What is the lead time for AD9632AR?
Request the current AD9632AR lead time and minimum order quantity through the Request a Quote form on this page. The manufacturer lists the AD9632 family in production, which supports ongoing supply planning, but actual lead time depends on order quantity and inventory. Providing the required quantity and target delivery date in the quote request allows the current schedule to be confirmed.
Is AD9632AR in stock?
Use the Request a Quote form on this page to request current AD9632AR inventory confirmation and an order quotation. The Analog Devices product page identifies the AD9632 family as production, but that status does not by itself guarantee stock for every quantity or shipment date. The quote request is the appropriate route for confirming allocation, standard quantity, and delivery timing.
What is the best drop-in replacement for AD9632AR?
AD9632ARZ is the closest documented drop-in option because it uses the same 8-pin SOIC configuration and identifies the same AD9632 electrical family. Its ordering suffix differs, so package and pin compatibility must still be checked against the manufacturer ordering guide. AD9631ARZ shares the 8-pin SOIC family format but is unity-gain stable rather than stable from gain 2, so it is only a candidate where gain and stability behavior remain acceptable.
Can AD9632AR-REEL replace AD9632AR on the same PCB?
AD9632AR-REEL is a documented same-family ordering option and is described as having consistent terminals, package, and principal operating characteristics versus AD9632AR. It can therefore be treated as an 8-pin SOIC drop-in candidate when the reel suffix matches the assembly process and the ordering code is confirmed. Always verify the complete ordering suffix and pinout against the Analog Devices documentation.
What can replace AD9632AR?
The documented replacement path is AD9632ARZ or another documented AD9632 ordering option in the same 8-pin SOIC family. These parts preserve the AD9632 voltage-feedback architecture and minimum gain-2 stability behavior. AD9631ARZ is not an automatic substitute because it is unity-gain stable; it should be selected only when the application can accept its different stability characteristic.
AD9632AR vs AD9631ARZ - which is better for a high-speed filter?
Choose AD9632AR when the filter operates at a closed-loop gain of 2 or greater and the design benefits from the AD9632's 320 MHz small-signal and 250 MHz large-signal bandwidth. AD9631ARZ may be preferable for a unity-gain stage because that family member is unity-gain stable. The decision should also consider output loading, feedback values, distortion, and the required settling behavior, not bandwidth alone.
When should I choose AD9632AR over AD9631ARZ?
Choose AD9632AR when the signal chain uses a closed-loop gain of 2 or greater and requires the AD9632 family's ultralow-distortion, wide-bandwidth behavior. Choose AD9631ARZ when unity-gain operation is required or when a unity-gain-stable implementation simplifies the feedback network. Both are associated with 8-pin SOIC devices in the AD9631/AD9632 family, but their gain-stability behavior differs.
Is AD9632AR suitable for video and data-acquisition front ends?
The AD9632AR is suitable for high-speed video conditioning and data-acquisition front ends when the closed-loop gain is at least 2. Its 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth support wide-band signal paths, while the ultralow-distortion positioning is useful for precision analog stages. Practical performance still depends on source impedance, load, feedback resistors, bypass capacitors, and PCB return-path quality.

Справочные инженерные данные для AD9632AR — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose AD9632AR for a high-speed, low-distortion signal path whose closed-loop gain is 2 or greater. Its 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth make it appropriate for wideband video, instrumentation, communications IF, active filtering, and ADC-driver stages. AD9632ARZ is the most direct documented ordering alternative because it retains the same 8-pin SOIC construction and AD9632 electrical behavior; select it when its ordering code matches the assembly and procurement requirements. AD9632AR-REEL and AD9632AR-REEL7 can serve the same circuit role where reel-packaging configuration is suitable. AD9632AREL is another same-family ordering candidate, but the complete ordering guide should be checked before substitution. AD9631ARZ is best considered when unity-gain stability is required or beneficial; it is not a behaviorally identical choice for gain-2 designs because the AD9632's documented minimum stable gain is 2.

Сравнение с аналогами

Параметр Этот товар AD9632ARZ AD9632AR-REEL AD9632AR-REEL7 AD9632AREL AD9631ARZ
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Architecture Voltage feedback Voltage feedback Voltage feedback Voltage feedback Voltage feedback Voltage feedback
Minimum Stable Gain 2 2 2 2 2 1, unity-gain stable
Number of Circuits 1 1 1 1 1 1

Ключевые отличия

  • Higher documented bandwidth for the AD9632 family ordering options (против AD9631ARZ)
  • Explicit minimum stable gain of 2 (против AD9631ARZ)
  • Single-channel high-speed design in a standard 8-pin SOIC (против AD9632ARZ)

Заметки по проектированию

Do not configure the AD9632AR for a closed-loop gain below 2. Unlike a unity-gain-stable amplifier, the AD9632 is intended for gain 2 or greater. Check the complete feedback equation, including any input-divider network, because a topology that appears to provide a larger gain can still encounter a low effective gain at some frequencies. Use the manufacturer gain-stability and electrical-characteristic tables before finalizing the feedback values.

Place the input, output, feedback, and supply bypass connections directly around the 8-pin SOIC. Keep the feedback loop physically small to minimize parasitic inductance and capacitance, maintain a continuous ground reference beneath the device, and avoid routing sensitive input traces parallel to digital or switching-current paths. The high-speed device can expose poor return-path continuity as overshoot, ringing, or distortion even when the nominal amplifier circuit is correct.

Validate source impedance, load capacitance, and feedback-component values with the complete circuit model. Capacitive loading can reduce stability margin or create peaking, while long PCB traces can add phase delay. Use short output routing when driving an ADC or other high-speed input, terminate unused outputs according to the manufacturer's guidance, and evaluate channel-to-channel timing if multiple amplifier stages are cascaded.

Use local high-frequency supply bypassing and a quiet ground return to prevent supply ripple from modulating the output. The bypass capacitor should be positioned close to the appropriate power pin, with additional bulk decoupling placed according to the complete power-distribution architecture. Check the operating supply limits, output-current capability, and thermal conditions in the manufacturer datasheet before selecting the final rail and power source.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No explicit AD9632AR RoHS, REACH, lead-free, halogen-free, or conflict-minerals status appears in the available product records. AEC-Q100 qualification is not indicated, and the device is not an automotive-qualified component.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

AD9632AR datasheet AD9632AR pinout AD9632AR datasheet pdf AD9632AR 320 MHz AD9632AR 8-SOIC AD9632AR equivalent AD9632AR replacement AD9632AR drop-in replacement AD9632AR vs AD9631ARZ AD9632AR video amplifier AD9632AR price AD9632AR stock Analog Devices AD9632AR

Связанные компоненты & термины

Analog Devices AD9632AR AD9632ARZ AD9632AR-REEL AD9632AR-REEL7 AD9632AREL AD9631ARZ voltage-feedback operational amplifier operational amplifier amplifier IC high-speed analog signal conditioning 320 MHz small-signal bandwidth 250 MHz large-signal bandwidth minimum stable gain of 2 ultralow distortion active filter data-acquisition front end video signal conditioning communications IF amplifier 8-pin SOIC SOIC package family surface-mount package ADC driver Analog Devices AD9632 datasheet Rev. D
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ