AD9632AR - 320 MHz Ultralow-Distortion Op Amp | Analog Devices
MPN: AD9632AR ✓ Hoạt độngAD9632AR Tóm tắt
A voltage-feedback operational amplifier is a semiconductor amplifier that uses feedback around an inverting input to control gain and bandwidth. Within the amplifier-IC hierarchy, this high-speed device sits above general-purpose precision amplifiers and serves applications requiring wide bandwidth, fast settling behavior, low distortion, and operation at closed-loop gains of 2 or higher. Unlike unity-gain-stable amplifiers, the AD9632AR is intended for inverting or noninverting configurations whose minimum stable gain is 2.
Principal features include a 320 MHz small-signal bandwidth, a 250 MHz large-signal bandwidth, voltage-feedback architecture, and ultralow-distortion operation. The 250 MHz large-signal rating indicates substantial bandwidth when handling larger output excursions, while the 320 MHz small-signal rating characterizes operation with smaller signal amplitudes. Its minimum stable gain of 2 makes it particularly appropriate for high-speed signal conditioning, analog video paths, data-acquisition front ends, and active filtering.
The Analog Devices AD9631/AD9632 family uses a voltage-feedback architecture selected for high-speed closed-loop performance and low distortion. In a typical application, the AD9632AR would be placed around an analog input stage with external feedback resistors selected for a gain of at least 2. Termination, input attenuation, biasing, and output loading remain application-specific and must be evaluated against the complete signal chain rather than inferred from the nominal bandwidth alone.
Typical uses include video-signal conditioning, high-speed instrumentation, wideband active filters, communications receivers, and precision data-acquisition systems. In an active filter stage, the amplifier's bandwidth and distortion characteristics can support signal paths where a general-purpose op amp would not provide sufficient bandwidth. For video systems, the device can provide gain and impedance conditioning ahead of a converter or downstream display-processing circuit.
Designers should preserve signal integrity with short PCB traces, a compact ground return, clean supply bypassing, and stable feedback components. Feedback resistor values should be chosen so parasitic capacitance does not create excessive peaking near the operating bandwidth. The minimum gain of 2 must be observed in every feedback configuration, and source and load impedances should be checked for stability and distortion.
This product record combines the manufacturer's device information with engineering-oriented interpretation, including package guidance, gain-stability constraints, practical applications, and a parameter-by-parameter comparison with available same-package alternatives.
Bộ thay thế dễ dàng lắp đặt cho AD9632AR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD9632AR (cùng hình factor và footprint) — khác nhau ở Package, Large-Signal Bandwidth, Number of Circuits.
AD9632ARZ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD9632AR-REEL
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AD9632AR-REEL7
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AD9632AREL
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AD9631ARZ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD9632AR Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Voltage-feedback operational amplifier |
| Small-Signal Bandwidth | 320 MHz |
| Large-Signal Bandwidth | 250 MHz |
| Minimum Stable Gain | 2 |
| Number of Circuits | 1 |
| Số lượng chân | 8 |
| Hộp | 8-pin SOIC |
| Kiểu lắp đặt | Surface mount |
| Production Status | Production |
| Distortion Class | Ultralow distortion |
| Signal Type | Single-ended voltage-feedback signal |
Cấu hình chân AD9632AR
| Chân 1 | -IN — Inverting input |
| Chân 2 | +IN — Noninverting input |
| Chân 3 | V- — Negative supply connection |
| Chân 4 | NC — Not connected |
| Chân 5 | NC — Not connected |
| Chân 6 | V+ — Positive supply connection |
| Chân 7 | -OUT — Inverting output |
| Chân 8 | +OUT — Noninverting output |
Ứng dụng tiêu biểu
AD9632AR phù hợp cho 6 Áp dụngs: High-Speed Video Signal Conditioning, Wideband Data-Acquisition Front End, Communications Receiver IF Amplifier, High-Speed Active Filter, Precision Analog Instrumentation, Video ADC Driver Stage.
High-Speed Video Signal Conditioning
The AD9632AR fits analog video paths that require low-distortion gain and wide bandwidth. Its 320 MHz small-signal bandwidth provides substantial operating margin above typical baseband video bandwidth, while the 250 MHz large-signal specification helps characterize performance with larger output excursions. The device is stable at gain 2 or greater, so it is appropriate for inverting or noninverting conditioning stages that scale signals before digitization. In a practical implementation, keep the feedback loop compact, terminate the source correctly, and place supply bypass capacitors close to the power pins. Preserve a continuous ground reference under the SOIC and avoid long routes between the amplifier, feedback network, and downstream converter.
Được đề xuất
Wideband Data-Acquisition Front End
AD9632AR can provide the low-distortion gain stage ahead of an ADC in a high-speed acquisition channel. Its 320 MHz small-signal bandwidth supports wideband signal capture, and its ultralow-distortion positioning helps preserve signal fidelity when the input is amplified by 2 or more. Use feedback values that preserve stability and control parasitic peaking, especially near the upper operating band. The source impedance, ADC input capacitance, and termination network must be evaluated together because the amplifier, converter, and PCB return path determine settling behavior. Short traces and local decoupling are essential for preserving the benefit of the high-speed device.
Được đề xuất
Communications Receiver IF Amplifier
The AD9632AR is suitable for intermediate-frequency amplification in receiver front ends where bandwidth, low distortion, and controlled gain are more important than unity-gain operation. Its 250 MHz large-signal bandwidth and 320 MHz small-signal bandwidth create useful margin for wideband IF paths, while the gain-2 stability requirement allows conventional closed-loop implementations. Component selection must account for filter impedance, source loading, and the frequency-dependent behavior of the feedback network. Place the amplifier close to the relevant filter or mixer output, maintain a low-impedance return path, and use separate high-frequency bypassing near the supply pins to limit supply-induced modulation.
Được đề xuất
High-Speed Active Filter
AD9632AR can serve as an active element in wideband filters whose operating bandwidth requires substantially more speed than a general-purpose operational amplifier. Its 320 MHz small-signal bandwidth and ultralow-distortion positioning are useful when preserving signal shape through cascaded gain and filtering stages. The minimum stable gain of 2 must be satisfied by the topology, and component tolerances can affect the transfer function. Keep feedback resistors and compensation capacitors close to the device, use identical layout techniques for repeated channels, and terminate unused amplifier inputs appropriately. Validate the complete filter response with realistic source and load impedities because bandwidth alone does not determine the final response.
Được đề xuất
Precision Analog Instrumentation
AD9632AR is appropriate for instrumentation blocks that amplify or condition signals with bandwidth beyond ordinary precision op amps. The 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth provide frequency headroom, while the ultralow-distortion characteristic supports accurate reproduction of rapidly changing waveforms. The amplifier should be used at gain 2 or greater, with attention to bias current, offset, noise, and stability requirements from the complete electrical characteristics. Use a quiet ground plane, avoid long high-impedance routes near the input, and separate sensitive input returns from noisy switching currents. Calibration and measurement results should be checked at the signal frequencies relevant to the instrument.
Được đề xuất
Video ADC Driver Stage
AD9632AR can drive or condition the analog input of a video converter when the channel requires low distortion and a closed-loop gain of at least 2. Its high bandwidth permits short settling paths and supports rapid edge content, while its single-channel SOIC package simplifies routing in space-constrained designs. The output load, including converter input capacitance, should be checked against the amplifier electrical characteristics before layout is finalized. Use short, symmetric traces between the output and converter, establish a continuous ground plane, and place decoupling near both the amplifier and converter. Avoid long stubs and ensure the gain network does not accidentally create a configuration below the minimum stable gain of 2.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD9632AR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD9632ARZ | AD9632AR-REEL | AD9632AR-REEL7 | AD9632AREL | AD9631ARZ |
|---|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Architecture | Voltage feedback | Voltage feedback | Voltage feedback | Voltage feedback | Voltage feedback | Voltage feedback |
| Minimum Stable Gain | 2 | 2 | 2 | 2 | 2 | 1, unity-gain stable |
| Number of Circuits | 1 | 1 | 1 | 1 | 1 | 1 |
Bảo phân biệt quan trọng
- Higher documented bandwidth for the AD9632 family ordering options (vsAD9631ARZ)
- Explicit minimum stable gain of 2 (vsAD9631ARZ)
- Single-channel high-speed design in a standard 8-pin SOIC (vsAD9632ARZ)
Ghi chú thiết kế
Do not configure the AD9632AR for a closed-loop gain below 2. Unlike a unity-gain-stable amplifier, the AD9632 is intended for gain 2 or greater. Check the complete feedback equation, including any input-divider network, because a topology that appears to provide a larger gain can still encounter a low effective gain at some frequencies. Use the manufacturer gain-stability and electrical-characteristic tables before finalizing the feedback values.
Place the input, output, feedback, and supply bypass connections directly around the 8-pin SOIC. Keep the feedback loop physically small to minimize parasitic inductance and capacitance, maintain a continuous ground reference beneath the device, and avoid routing sensitive input traces parallel to digital or switching-current paths. The high-speed device can expose poor return-path continuity as overshoot, ringing, or distortion even when the nominal amplifier circuit is correct.
Validate source impedance, load capacitance, and feedback-component values with the complete circuit model. Capacitive loading can reduce stability margin or create peaking, while long PCB traces can add phase delay. Use short output routing when driving an ADC or other high-speed input, terminate unused outputs according to the manufacturer's guidance, and evaluate channel-to-channel timing if multiple amplifier stages are cascaded.
Use local high-frequency supply bypassing and a quiet ground return to prevent supply ripple from modulating the output. The bypass capacitor should be positioned close to the appropriate power pin, with additional bulk decoupling placed according to the complete power-distribution architecture. Check the operating supply limits, output-current capability, and thermal conditions in the manufacturer datasheet before selecting the final rail and power source.
Thông tin tuân thủ
No explicit AD9632AR RoHS, REACH, lead-free, halogen-free, or conflict-minerals status appears in the available product records. AEC-Q100 qualification is not indicated, and the device is not an automotive-qualified component.