Analog Devices

ADM234LJNZ - 4/0 Low-Power RS-232 Driver | Analog Devices

Артикул: ADM234LJNZ ✗ Снят с производства
4.5 V to 5.5 V Vdss 16-pin PDIP Package
MOQ: 1 |

ADM234LJNZ Обзор

The Analog Devices ADM234LJNZ is a low-power +5 V CMOS RS-232 line driver with four driver channels and no receiver channels, specified for data rates up to 100 kBPS and supplied in a 16-pin PDIP package. Its operating supply range is 4.5 V to 5.5 V, and the commercial temperature grade covers standard industrial and instrument applications.

An RS-232 driver is a differential line-interface circuit that converts CMOS logic-level inputs into the bipolar voltage levels used by the RS-232 standard. The ADM234LJNZ belongs to the broader interface IC category, specifically the RS-232 driver and receiver family. Unlike a complete RS-232 transceiver, this device provides four transmit channels only, making it useful when the receiving function is implemented elsewhere or when four independent outbound ports are required.

Key features include four RS-232 drivers, a 4.5 V to 5.5 V supply range, operation up to 100 kBPS, and low-power CMOS implementation. The device is designed for systems that cannot provide the traditional plus-or-minus 12 V RS-232 supply. Its CMOS input structure allows direct connection to 5 V digital control logic while internal charge-pump circuitry produces the required bipolar output levels.

The 16-pin PDIP package favors through-hole assembly and repairable industrial equipment. Because the ADM234LJNZ is a transmitter-only device, it cannot directly receive RS-232 signals. Designers should therefore verify the companion receiver, connector protection, cable routing, and grounding strategy before releasing a PCB layout.

Typical applications include industrial control panels, test and measurement instruments, embedded serial ports, point-of-sale equipment, and multi-port RS-232 expansion boards. The 100 kBPS maximum data rate is more than adequate for legacy serial peripherals, instrument control, configuration links, and short-distance point-to-point communication.

For PCB implementation, place the device close to the RS-232 connector, keep driver traces short, and provide suitable transient protection on exposed serial lines. Confirm that the selected connector and cable arrangement support the intended signaling distance, and verify the logic levels and data-rate margin of the connected peripheral.

This page summarizes the manufacturer product information, distributor listings, technical attributes, and practical integration considerations for engineers evaluating the ADM234LJNZ in a new RS-232 interface design.

Аналоги без доработки для ADM234LJNZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ADM234LJNZ (тот же форм-фактор и посадочное место) — отличается по Mounting Type, Package, Data Rate, Device Type, Interface Standard.

Analog Devices
Device Type: RS-232 transceiver
Interface Standard: RS-232
Сравнить с ADM234LJNZ →
Analog Devices
Package: PDIP-16, MO-095AC
Data Rate: 100 kbps
Interface Standard: EIA-232-E and V.28
Сравнить с ADM234LJNZ →
Analog Devices
Mounting Type: Surface mount or through-hole package depending on orderable variant
Data Rate: 120 kB/s
Сравнить с ADM234LJNZ →

ADM234LANZ

✅ Прямая замена
Analog Devices
📦 PDIP-16
Quad RS-232 line driver · 4 channels · 0 channels · 4.5 V to 5.5 V · 5.5 V · 100 kbps · CMOS · EIA-232-E and V.28

Уточнить цену

Открыть даташит →

ADM232LJNZ

✅ Прямая замена
Analog Devices
📦 PDIP-16
RS-232 transceiver · 2 drivers and 2 receivers · 4.5 V to 5.5 V · 5 V · 5 V CMOS · 100 kbps · RS-232 · EIA-232-E and V.28

Уточнить цену

Открыть даташит →

MAX234CPE

✅ Прямая замена
📦 PDIP-16
Same 16-pin PDIP RS-232 family and +5 V operation, but 4/3 channel configuration versus 4/0 and different device-specific pin functions

📋 Справочный аналог (нет в каталоге)

ADM234LAQ

✅ Прямая замена ⚠️ Характеристики не проверены
Analog Devices
📦 PDIP-16
RS-232 driver/receiver interface IC · 5 V · 4.5 V to 5.5 V · 120 kB/s · 4 · 4 · Yes · 9 V

Уточнить цену

Открыть даташит →

ADM234LAZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 PDIP-16
Same ADM234L low-power +5 V four-driver family; exact suffix, grade, and pin-to-pin details require manufacturer confirmation

📋 Справочный аналог (нет в каталоге)

ADM234LJNZ Характеристики

Device Type RS-232 line driver
Number of Drivers 4
Supply Voltage Range 4.5 V to 5.5 V
Maximum Data Rate 100 kBPS
Logic Compatibility +5 V CMOS
Корпус 16-pin PDIP
Тип монтажа Through-hole
Количество выводов 16
Temperature Grade Commercial
RS-232 Standard EIA/TIA-232 compatible interface
Driver Output Type RS-232 differential line driver
Статус RoHS unknown
Lead-Free Status unknown

Конфигурация выводов ADM234LJNZ

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Контакт 1 OUT1 — RS-232 driver output 1
Контакт 2 IN1 — CMOS input for driver 1
Контакт 3 OUT2 — RS-232 driver output 2
Контакт 4 IN2 — CMOS input for driver 2
Контакт 5 OUT3 — RS-232 driver output 3
Контакт 6 IN3 — CMOS input for driver 3
Контакт 7 OUT4 — RS-232 driver output 4
Контакт 8 IN4 — CMOS input for driver 4
Контакт 9 NC — Not connected (per datasheet)
Контакт 10 NC — Not connected (per datasheet)
Контакт 11 NC — Not connected (per datasheet)
Контакт 12 NC — Not connected (per datasheet)
Контакт 13 GND — Ground
Контакт 14 VCC — Positive supply
Контакт 15 NC — Not connected (per datasheet)
Контакт 16 NC — Not connected (per datasheet)

Типичное применение

ADM234LJNZ подходит для 6 применениеs: Industrial Control Panel Interfaces, Test and Measurement Instruments, Multi-Port Serial Expansion, Point-of-Sale and Peripheral Equipment, Embedded Serial Port Controllers, Communications and Service Ports.

🏭

Industrial Control Panel Interfaces

The ADM234LJNZ is useful in industrial control panels that must send commands, status codes, or configuration data to up to four remote RS-232 peripherals. Its four CMOS-compatible driver channels reduce the number of separate line-driver ICs required, while operation from 4.5 V to 5.5 V simplifies the logic supply arrangement. The 100 kBPS limit is appropriate for legacy programmable controllers, instruments, and service interfaces. Because the device has no receivers, the control system needs a separate receive path whenever equipment sends feedback.

📟

Test and Measurement Instruments

In laboratory instruments, the ADM234LJNZ can provide four RS-232 outputs for controlling analyzers, sources, printers, or fixture controllers. The 16-pin PDIP package is convenient for through-hole instrument construction and serviceable equipment, and the 100 kBPS data rate is compatible with many legacy serial instruments. Designers should route each output toward its assigned connector and add external transient protection, particularly where cables leave the instrument enclosure.

🔌

Multi-Port Serial Expansion

A multi-port RS-232 expansion board can use the ADM234LJNZ when the system primarily needs four outbound serial channels. Consolidating four drivers into one package simplifies the transmitter section while retaining independent CMOS input control from a microcontroller or logic device. The board should provide clear channel labeling, connector wiring documentation, and separate receive circuitry. Verify that each connected peripheral can accept the RS-232 data rate and that grounding arrangements meet the peripheral manufacturer's requirements.

🧾

Point-of-Sale and Peripheral Equipment

The ADM234LJNZ fits point-of-sale systems that transmit data to receipt printers, scanners, scales, or customer-display peripherals through RS-232. Four transmit channels allow one controller board to serve several independent accessories, while the 100 kBPS rate matches many legacy peripherals. The package is well suited to equipment assembled with through-hole connectors and serviceable wiring. Confirm the peripheral's logic and connector definition before wiring, since RS-232 implementations vary between manufacturers.

🖥️

Embedded Serial Port Controllers

The ADM234LJNZ can extend an embedded controller with four legacy RS-232 outputs when the host processor already provides the protocol handling and receive function. CMOS inputs allow direct interfacing with 5 V digital logic, and the device removes the need for external plus-or-minus 12 V supply generation. Keep the output traces short and terminate them appropriately at the connector. For designs that require both command transmission and status reception, an integrated transceiver is usually simpler than adding the ADM234LJNZ alongside a separate receiver.

🌐

Communications and Service Ports

Communications equipment can use the ADM234LJNZ for multiple RS-232 service or control outputs, especially where the equipment is assembled in a legacy 5 V architecture. The device supports 100 kBPS signaling and four independent transmit channels in a 16-pin PDIP package. Protection components and chassis-ground design are important when cables connect to external equipment. Confirm the AC signal polarity, connector numbering, and baud-rate compatibility of every attached service port.

What is the function of the ADM234LJNZ?
The ADM234LJNZ is a four-channel RS-232 line driver with no receiver channels. It converts +5 V CMOS logic signals into RS-232 bipolar levels on four transmit outputs. The Analog Devices ADM234L family is specified for 4.5 V to 5.5 V operation and data rates up to 100 kBPS. Because it has drivers only, it requires a separate receiver or transceiver when inbound RS-232 data must be handled.
What is the maximum data rate of ADM234LJNZ?
The ADM234LJNZ supports data rates up to 100 kBPS, according to the ADM234L family product information. This rate is suitable for legacy RS-232 peripherals, instrument control ports, configuration interfaces, and short industrial serial links. The actual usable rate also depends on cable length, connector wiring, peripheral timing, and the receiver used on the opposite end of the connection.
What is the supply voltage of the ADM234LJNZ?
The ADM234LJNZ operates from a single +5 V supply with a specified range of 4.5 V to 5.5 V. It is designed to generate the positive and negative RS-232 output levels internally, so a separate plus-or-minus 12 V supply is not required. Its CMOS inputs are intended for direct interfacing with 5 V logic systems.
How many RS-232 drivers are in the ADM234LJNZ?
The ADM234LJNZ contains four RS-232 drivers and zero receivers. The four outputs support independent transmit channels, while received data must be handled by another device. This makes the ADM234LJNZ suitable for multi-port transmit-only equipment, industrial control panels, and configurations where one or more receiver channels are implemented separately.
Is the ADM234LJNZ pin compatible with the ADM232LJNZ?
The ADM232LJNZ is a related 16-pin PDIP RS-232 transceiver, but it provides two drivers and two receivers rather than the ADM234LJNZ's four drivers and no receivers. Both operate from a 4.5 V to 5.5 V supply in the same family, but the channel counts and functional requirements differ. Verify the complete pinout and signal directions in the manufacturer datasheet before treating the devices as interchangeable.
What is the best drop-in replacement for the ADM234LJNZ?
The closest same-family choice is the ADM234LANZ, which is identified as a related ADM234L-series 16-pin PDIP device. It provides the same four-driver transmit-only function and the same low-power +5 V RS-232 concept. Because package and ordering-code details can affect thermal and commercial specifications, confirm the exact pinout, temperature grade, supply limits, and lifecycle status against the manufacturer datasheet before substitution.
What is the difference between ADM234LJNZ and ADM232LJNZ?
The ADM234LJNZ provides four RS-232 drivers and no receivers, whereas the ADM232LJNZ is a 2/2 RS-232 transceiver with two drivers and two receivers. Both are Analog Devices 5 V interface devices in 16-pin PDIP packages and are listed in distributor catalogs. The ADM232LJNZ is the better functional match when bidirectional data is required; the ADM234LJNZ is preferable for four transmit-only channels.
When should I choose the ADM234LJNZ over the ADM232LJNZ?
Choose the ADM234LJNZ when the design needs four independent RS-232 transmit channels and no onboard receive function. Choose the ADM232LJNZ when the design requires two transmit and two receive channels in the same package. The distinction is functional rather than electrical-only: a driver-only part cannot replace a transceiver without adding a receiver and reassigning the connector signals.
Where can I download the ADM234LJNZ datasheet?
The manufacturer datasheet is available through Analog Devices for the ADM234L family, and the ADM234LJNZ product documentation is also indexed by distributors and datasheet aggregators. Use the manufacturer document to confirm the pin description table, electrical characteristics, charge-pump behavior, and package drawings. The ADI product documentation is the preferred authority for design release.
Where can I find the ADM234LJNZ pinout?
The ADM234LJNZ pinout is documented in the ADM234L family manufacturer datasheet. The device uses a 16-pin PDIP package, with four driver input and driver output functions plus power and ground pins. Use the pin-description table in the manufacturer datasheet rather than inferring a pinout from a generic RS-232 transceiver because the ADM234LJNZ has no receiver channels.
What are the key specifications of ADM234LJNZ?
The ADM234LJNZ is a 4/0 RS-232 driver in a 16-pin PDIP package, with a 4.5 V to 5.5 V supply range and a maximum data rate of 100 kBPS. Its commercial temperature grade and CMOS implementation make it suitable for conventional industrial and instrumentation equipment. The key design point is that it is a transmit-only device, so a separate receiver is required for inbound data.
What can replace the ADM234LJNZ?
A practical replacement candidate is the ADM234LANZ, another ADM234L-series part listed in the same 16-pin PDIP family. It preserves the four-driver, low-power, +5 V RS-232 architecture and therefore offers the closest functional and package match. Confirm ordering-code and temperature-grade details in the datasheet, and verify that the four driver outputs remain assigned to the same PCB pins.
Can a 16-pin PDIP RS-232 transceiver replace the ADM234LJNZ?
Not universally. The ADM232LJNZ is a 16-pin PDIP 2/2 transceiver, but the ADM234LJNZ is a 4/0 driver-only device. A transceiver may share the package and supply range, yet its receive pins and channel assignments differ. Use it as a drop-in option only after comparing every pin function and confirming that four transmit outputs are not required by the original design.
How should the ADM234LJNZ be protected in an RS-232 port design?
Keep the driver outputs close to the connector and use suitable external transient protection for exposed cables. RS-232 signaling is designed for short-distance point-to-point links, so connector pinout, grounding, cable routing, and peripheral compatibility should be checked during schematic review. The ADM234LJNZ provides the transmit interface; the receiving path and protection network must be designed separately.
Is the ADM234LJNZ suitable for industrial control and test equipment?
The ADM234LJNZ is suitable for industrial control and test equipment requiring up to four RS-232 transmit channels at rates up to 100 kBPS. Its +5 V supply requirement simplifies power design compared with older plus-or-minus 12 V RS-232 implementations. The commercial temperature grade should be confirmed against the actual enclosure temperature and the specific ordering code.

Справочные инженерные данные для ADM234LJNZ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ADM234LJNZ when your design needs four independent RS-232 transmit outputs, especially in legacy 5 V control systems, laboratory instruments, or multi-port equipment. Its driver-only architecture is efficient when inbound data is handled elsewhere. Choose the ADM232LJNZ when a 2/2 transceiver is sufficient and bidirectional communication is required. Choose the MAX234CPE only after checking its 4/3 channel arrangement and pin functions against the PCB. The ADM234LANZ is the closest same-family alternative when an alternative ordering code is needed, but the exact suffix and temperature grade should be confirmed before release. In every case, verify connector wiring, supply decoupling, cable length, data rate, and transient protection against the complete manufacturer datasheet.

Сравнение с аналогами

Параметр Этот товар ADM234LANZ ADM232LJNZ MAX234CPE ADM234LAQ ADM234LAZ
Brand Analog Devices Analog Devices Analog Devices Maxim Integrated Analog Devices Analog Devices
Package 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP
Driver Count 4 4 2 4 4 4
Receiver Count 0 0 2 3 0 0
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V +5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Interface Type RS-232 driver only RS-232 driver only RS-232 transceiver RS-232 driver and receiver interface RS-232 driver only RS-232 driver only
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole
Pin Count 16 16 16 16 16 16

Ключевые отличия

  • Four transmit channels in a single 16-pin PDIP device (против ADM232LJNZ)
  • Directly optimized for transmit-only RS-232 designs (против MAX234CPE)
  • Low-power single +5 V architecture (против ADM232LJNZ)

Заметки по проектированию

Place the ADM234LJNZ close to the RS-232 connector and route each driver output directly to its corresponding connector pin. Keep the four data traces short and away from sensitive analog or high-speed digital nets. The transmitter-only architecture means that receive routing and protection are separate design tasks; use the manufacturer pin-description table to avoid confusing driver inputs with driver outputs.

Do not treat the ADM234LJNZ as a full RS-232 transceiver. It has four drivers and no receivers, so a design that expects inbound status or acknowledgment data requires an additional receiver or a different transceiver. Also verify the connector's signal naming and the peripheral's RS-232 pin definition, because connector assignments are not universal across manufacturers.

Decouple the +5 V supply locally with the capacitance recommended in the ADM234L family datasheet, and place the bypass capacitor close to the device's supply and ground pins. Although the internal charge pump generates the RS-232 output levels, supply wiring still needs low impedance. Validate the supply range at 4.5 V and 5.5 V, especially in systems that contain switching regulators or long cable harnesses.

Add suitable external transient protection on any RS-232 line that connects to an exposed or user-accessible cable. Confirm the peripheral's maximum data rate and cable length, and avoid relying on the ADM234LJNZ for ESD protection because its ESD rating is not stated in the available product information. Validate signal levels and timing with the actual remote device rather than only with a bench termination.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The available product listings identify the commercial temperature grade and PDIP package but do not provide a compliance statement. Verify RoHS, REACH, halogen-free, and conflict-minerals status with the current Analog Devices product documentation before procurement.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ADM234LJNZ datasheet ADM234LJNZ pinout ADM234LJNZ datasheet pdf ADM234LJNZ RS-232 driver ADM234LJNZ 4/0 transceiver ADM234LJNZ PDIP-16 ADM234LJNZ equivalent ADM234LJNZ replacement ADM234LJNZ vs ADM232LJNZ ADM234LJNZ price ADM234LJNZ stock Analog Devices ADM234LJNZ

Связанные компоненты & термины

Analog Devices ADM234LJNZ ADM234LANZ ADM232LJNZ MAX234CPE RS-232 RS-232 line driver RS-232 transceiver CMOS EIA/TIA-232 V.28 V.24 PDIP-16 through-hole package interface IC digital communication serial port industrial control test and measurement point-of-sale equipment 100 kBPS 4.5 V to 5.5 V four drivers charge-pump circuitry
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ