ADM234LJNZ - 4/0 Low-Power RS-232 Driver | Analog Devices
MPN: ADM234LJNZ ✗ Cuối đờiADM234LJNZ Tóm tắt
An RS-232 driver is a differential line-interface circuit that converts CMOS logic-level inputs into the bipolar voltage levels used by the RS-232 standard. The ADM234LJNZ belongs to the broader interface IC category, specifically the RS-232 driver and receiver family. Unlike a complete RS-232 transceiver, this device provides four transmit channels only, making it useful when the receiving function is implemented elsewhere or when four independent outbound ports are required.
Key features include four RS-232 drivers, a 4.5 V to 5.5 V supply range, operation up to 100 kBPS, and low-power CMOS implementation. The device is designed for systems that cannot provide the traditional plus-or-minus 12 V RS-232 supply. Its CMOS input structure allows direct connection to 5 V digital control logic while internal charge-pump circuitry produces the required bipolar output levels.
The 16-pin PDIP package favors through-hole assembly and repairable industrial equipment. Because the ADM234LJNZ is a transmitter-only device, it cannot directly receive RS-232 signals. Designers should therefore verify the companion receiver, connector protection, cable routing, and grounding strategy before releasing a PCB layout.
Typical applications include industrial control panels, test and measurement instruments, embedded serial ports, point-of-sale equipment, and multi-port RS-232 expansion boards. The 100 kBPS maximum data rate is more than adequate for legacy serial peripherals, instrument control, configuration links, and short-distance point-to-point communication.
For PCB implementation, place the device close to the RS-232 connector, keep driver traces short, and provide suitable transient protection on exposed serial lines. Confirm that the selected connector and cable arrangement support the intended signaling distance, and verify the logic levels and data-rate margin of the connected peripheral.
This page summarizes the manufacturer product information, distributor listings, technical attributes, and practical integration considerations for engineers evaluating the ADM234LJNZ in a new RS-232 interface design.
Bộ thay thế dễ dàng lắp đặt cho ADM234LJNZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADM234LJNZ (cùng hình factor và footprint) — khác nhau ở Mounting Type, Package, Data Rate, Device Type, Interface Standard.
ADM234LANZ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ADM232LJNZ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX234CPE
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADM234LAQ
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ADM234LAZ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ADM234LJNZ Thông số kỹ thuật
| Device Type | RS-232 line driver |
| Number of Drivers | 4 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Maximum Data Rate | 100 kBPS |
| Logic Compatibility | +5 V CMOS |
| Hộp | 16-pin PDIP |
| Kiểu lắp đặt | Through-hole |
| Số lượng chân | 16 |
| Temperature Grade | Commercial |
| RS-232 Standard | EIA/TIA-232 compatible interface |
| Driver Output Type | RS-232 differential line driver |
| Trạng thái RoHS | unknown |
| Lead-Free Status | unknown |
Cấu hình chân ADM234LJNZ
| Chân 1 | OUT1 — RS-232 driver output 1 |
| Chân 2 | IN1 — CMOS input for driver 1 |
| Chân 3 | OUT2 — RS-232 driver output 2 |
| Chân 4 | IN2 — CMOS input for driver 2 |
| Chân 5 | OUT3 — RS-232 driver output 3 |
| Chân 6 | IN3 — CMOS input for driver 3 |
| Chân 7 | OUT4 — RS-232 driver output 4 |
| Chân 8 | IN4 — CMOS input for driver 4 |
| Chân 9 | NC — Not connected (per datasheet) |
| Chân 10 | NC — Not connected (per datasheet) |
| Chân 11 | NC — Not connected (per datasheet) |
| Chân 12 | NC — Not connected (per datasheet) |
| Chân 13 | GND — Ground |
| Chân 14 | VCC — Positive supply |
| Chân 15 | NC — Not connected (per datasheet) |
| Chân 16 | NC — Not connected (per datasheet) |
Ứng dụng tiêu biểu
ADM234LJNZ phù hợp cho 6 Áp dụngs: Industrial Control Panel Interfaces, Test and Measurement Instruments, Multi-Port Serial Expansion, Point-of-Sale and Peripheral Equipment, Embedded Serial Port Controllers, Communications and Service Ports.
Industrial Control Panel Interfaces
The ADM234LJNZ is useful in industrial control panels that must send commands, status codes, or configuration data to up to four remote RS-232 peripherals. Its four CMOS-compatible driver channels reduce the number of separate line-driver ICs required, while operation from 4.5 V to 5.5 V simplifies the logic supply arrangement. The 100 kBPS limit is appropriate for legacy programmable controllers, instruments, and service interfaces. Because the device has no receivers, the control system needs a separate receive path whenever equipment sends feedback.
Được đề xuất
Test and Measurement Instruments
In laboratory instruments, the ADM234LJNZ can provide four RS-232 outputs for controlling analyzers, sources, printers, or fixture controllers. The 16-pin PDIP package is convenient for through-hole instrument construction and serviceable equipment, and the 100 kBPS data rate is compatible with many legacy serial instruments. Designers should route each output toward its assigned connector and add external transient protection, particularly where cables leave the instrument enclosure.
Được đề xuất
Multi-Port Serial Expansion
A multi-port RS-232 expansion board can use the ADM234LJNZ when the system primarily needs four outbound serial channels. Consolidating four drivers into one package simplifies the transmitter section while retaining independent CMOS input control from a microcontroller or logic device. The board should provide clear channel labeling, connector wiring documentation, and separate receive circuitry. Verify that each connected peripheral can accept the RS-232 data rate and that grounding arrangements meet the peripheral manufacturer's requirements.
Được đề xuất
Point-of-Sale and Peripheral Equipment
The ADM234LJNZ fits point-of-sale systems that transmit data to receipt printers, scanners, scales, or customer-display peripherals through RS-232. Four transmit channels allow one controller board to serve several independent accessories, while the 100 kBPS rate matches many legacy peripherals. The package is well suited to equipment assembled with through-hole connectors and serviceable wiring. Confirm the peripheral's logic and connector definition before wiring, since RS-232 implementations vary between manufacturers.
Được đề xuất
Embedded Serial Port Controllers
The ADM234LJNZ can extend an embedded controller with four legacy RS-232 outputs when the host processor already provides the protocol handling and receive function. CMOS inputs allow direct interfacing with 5 V digital logic, and the device removes the need for external plus-or-minus 12 V supply generation. Keep the output traces short and terminate them appropriately at the connector. For designs that require both command transmission and status reception, an integrated transceiver is usually simpler than adding the ADM234LJNZ alongside a separate receiver.
Được đề xuất
Communications and Service Ports
Communications equipment can use the ADM234LJNZ for multiple RS-232 service or control outputs, especially where the equipment is assembled in a legacy 5 V architecture. The device supports 100 kBPS signaling and four independent transmit channels in a 16-pin PDIP package. Protection components and chassis-ground design are important when cables connect to external equipment. Confirm the AC signal polarity, connector numbering, and baud-rate compatibility of every attached service port.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADM234LJNZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADM234LANZ | ADM232LJNZ | MAX234CPE | ADM234LAQ | ADM234LAZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Maxim Integrated | Analog Devices | Analog Devices |
| Package | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP |
| Driver Count | 4 | 4 | 2 | 4 | 4 | 4 |
| Receiver Count | 0 | 0 | 2 | 3 | 0 | 0 |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | +5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Interface Type | RS-232 driver only | RS-232 driver only | RS-232 transceiver | RS-232 driver and receiver interface | RS-232 driver only | RS-232 driver only |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
| Pin Count | 16 | 16 | 16 | 16 | 16 | 16 |
Bảo phân biệt quan trọng
- Four transmit channels in a single 16-pin PDIP device (vsADM232LJNZ)
- Directly optimized for transmit-only RS-232 designs (vsMAX234CPE)
- Low-power single +5 V architecture (vsADM232LJNZ)
Ghi chú thiết kế
Place the ADM234LJNZ close to the RS-232 connector and route each driver output directly to its corresponding connector pin. Keep the four data traces short and away from sensitive analog or high-speed digital nets. The transmitter-only architecture means that receive routing and protection are separate design tasks; use the manufacturer pin-description table to avoid confusing driver inputs with driver outputs.
Do not treat the ADM234LJNZ as a full RS-232 transceiver. It has four drivers and no receivers, so a design that expects inbound status or acknowledgment data requires an additional receiver or a different transceiver. Also verify the connector's signal naming and the peripheral's RS-232 pin definition, because connector assignments are not universal across manufacturers.
Decouple the +5 V supply locally with the capacitance recommended in the ADM234L family datasheet, and place the bypass capacitor close to the device's supply and ground pins. Although the internal charge pump generates the RS-232 output levels, supply wiring still needs low impedance. Validate the supply range at 4.5 V and 5.5 V, especially in systems that contain switching regulators or long cable harnesses.
Add suitable external transient protection on any RS-232 line that connects to an exposed or user-accessible cable. Confirm the peripheral's maximum data rate and cable length, and avoid relying on the ADM234LJNZ for ESD protection because its ESD rating is not stated in the available product information. Validate signal levels and timing with the actual remote device rather than only with a bench termination.
Thông tin tuân thủ
The available product listings identify the commercial temperature grade and PDIP package but do not provide a compliance statement. Verify RoHS, REACH, halogen-free, and conflict-minerals status with the current Analog Devices product documentation before procurement.