ADRV9003BBCZ - 1x1 RF Transceiver 30MHz-6GHz | Analog Devices
Артикул: ADRV9003BBCZ ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $150 | $150,00 |
| 10 | $135 | $1.350,00 |
| 100 | $120 | $12.000,00 |
| 500 | $105 | $52.500,00 |
| 1.000 | $95 | $95.000,00 |
ADRV9003BBCZ Обзор
An RF transceiver is a device that combines a transmitter and a receiver in a single package, sharing common circuitry. It is a fundamental building block in wireless communication systems, enabling bidirectional data transfer over radio frequencies. The ADRV9003 integrates the RF front-end, analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and digital signal processing, reducing the need for external components and simplifying system design.
Key features of the ADRV9003 include a wide frequency range of 30 MHz to 6 GHz, a maximum sample rate of 61.44 MSPS, and high linearity and dynamic range. The device supports both FDD and TDD operation, making it versatile for various communication standards. It also includes integrated synthesizers and a digital interface, allowing for flexible configuration and control.
The ADRV9003 utilizes advanced mixed-signal technology, integrating multiple functions that traditionally required separate components. Its architecture enables high performance while minimizing power consumption and board space. The device is designed for applications such as 5G base stations, software-defined radios, and test and measurement equipment, where high performance and flexibility are critical.
Typical applications include 5G wireless infrastructure, point-to-point microwave links, and military communications. The wide frequency range and high dynamic range make it suitable for demanding environments. The device's integrated DSP functions allow for real-time signal processing, reducing the load on external processors.
When designing with the ADRV9003, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails, and proper filtering is essential to achieve optimal performance. The CSP-BGA package requires a well-designed PCB layout with adequate thermal vias to dissipate heat effectively.
Аналоги без доработки для ADRV9003BBCZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADRV9003BBCZ (тот же форм-фактор и посадочное место) — отличается по Frequency Range, Package, Interface, Supply Voltage, Type.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ADRV9002BBCZ
✅ Прямая замена✓ В наличии
$210 / шт.
Открыть даташит →ADRV9002BBCZ-REEL
✅ Прямая замена✓ В наличии
$590.625 / шт.
Открыть даташит →ADRV9001BBCZ
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ADRV9004BBCZ
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$90 / шт.
Открыть даташит →ADRV9003BBCZ Характеристики
| Type | RF Transceiver |
| Frequency Range | 30 MHz to 6 GHz |
| Maximum Sample Rate | 61.44 MSPS |
| Number of Transmitters | 1 |
| Number of Receivers | 2 |
| Корпус | 196-Pin CSP-BGA |
| Тип монтажа | Surface Mount |
| Antenna | Not Included |
| Статус RoHS | Compliant |
Конфигурация выводов ADRV9003BBCZ
| Контакт A1 | GND — Ground |
| Контакт A2 | VDD — Power supply |
| Контакт B1 | TX1_P — Transmitter output positive |
| Контакт B2 | TX1_N — Transmitter output negative |
| Контакт C1 | RX1_P — Receiver 1 input positive |
| Контакт C2 | RX1_N — Receiver 1 input negative |
| Контакт D1 | RX2_P — Receiver 2 input positive |
| Контакт D2 | RX2_N — Receiver 2 input negative |
| Контакт E1 | CLK_IN — Reference clock input |
| Контакт E2 | SPI_CS — SPI chip select |
| Контакт F1 | SPI_CLK — SPI clock |
| Контакт F2 | SPI_SDIO — SPI data |
Типичное применение
ADRV9003BBCZ подходит для 6 применениеs: 5G Base Stations, Software-Defined Radio (SDR), Point-to-Point Microwave Links, Test and Measurement Equipment, Military Communications, IoT and Smart Grid.
5G Base Stations
The ADRV9003BBCZ is ideal for 5G base stations due to its wide frequency range (30 MHz to 6 GHz) and high sample rate (61.44 MSPS). It supports both FDD and TDD modes, enabling flexible deployment in various 5G NR bands. Its high linearity and dynamic range ensure reliable signal integrity in dense urban environments. The integrated DSP functions reduce the need for external processing, simplifying system design and reducing time-to-market.
Рекомендуется
Software-Defined Radio (SDR)
The ADRV9003BBCZ is well-suited for software-defined radios, offering a wide frequency range and high flexibility. Its 30 MHz to 6 GHz coverage allows it to handle multiple communication standards, from HF to microwave. The device's high sample rate and digital signal processing capabilities enable real-time reconfiguration, making it a versatile choice for military and commercial SDR platforms. Its compact CSP-BGA package is ideal for portable and embedded systems.
Рекомендуется
Point-to-Point Microwave Links
The ADRV9003BBCZ is designed for point-to-point microwave links, providing high linearity and dynamic range essential for long-distance communication. Its frequency range up to 6 GHz supports common microwave bands, and its integrated synthesizers simplify frequency planning. The device's low power consumption and compact package make it suitable for outdoor units. The high sample rate enables wideband modulation schemes, increasing data throughput.
Рекомендуется
Test and Measurement Equipment
The ADRV9003BBCZ is used in test and measurement equipment such as spectrum analyzers and signal generators. Its wide frequency range and high sample rate allow for accurate signal analysis and generation across multiple bands. The device's high dynamic range ensures precise measurements even in the presence of strong interfering signals. Its integrated DSP functions enable advanced signal processing, reducing the need for external hardware.
Рекомендуется
Military Communications
The ADRV9003BBCZ is suitable for military communications, offering secure and reliable wireless links. Its wide frequency range and high linearity make it resistant to jamming and interference. The device's compact package and low power consumption are ideal for manpack and vehicular systems. The integrated DSP functions support advanced waveforms and encryption, enhancing communication security.
Рекомендуется
IoT and Smart Grid
The ADRV9003BBCZ can be used in IoT and smart grid applications, providing reliable wireless connectivity for sensors and meters. Its wide frequency range supports various IoT bands, and its low power consumption is suitable for battery-powered devices. The device's high sensitivity ensures reliable communication in challenging environments. Its compact package enables integration into small form-factor devices.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADRV9003BBCZ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADRV9002BBCZ | ADRV9002BBCZ-REEL | ADRV9001BBCZ | ADRV9004BBCZ | AD9361BBCZ |
|---|---|---|---|---|---|---|
| Package | 196-Pin CSP-BGA | 196-Pin CSP-BGA | 196-Pin CSP-BGA | 196-Pin CSP-BGA | 196-Pin CSP-BGA | 144-Pin CSP-BGA |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Frequency Range | 30 MHz to 6 GHz | 30 MHz to 6 GHz | 30 MHz to 6 GHz | 30 MHz to 6 GHz | 30 MHz to 6 GHz | 70 MHz to 6 GHz |
| Maximum Sample Rate | 61.44 MSPS | 61.44 MSPS | 61.44 MSPS | 61.44 MSPS | 61.44 MSPS | 61.44 MSPS |
| Number of Transmitters | 1 | 2 | 2 | 1 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Integrated Synthesizers | Yes | Yes | Yes | Yes | Yes | Yes |
| Digital Signal Processing | Yes | Yes | Yes | Yes | Yes | Yes |
Ключевые отличия
- Wide frequency range from 30 MHz to 6 GHz (против AD9361BBCZ)
- Single transmitter with dual receivers (против ADRV9002BBCZ)
- Integrated digital signal processing (против AD9361BBCZ)
Заметки по проектированию
The ADRV9003BBCZ requires multiple power supply rails. Use low-noise LDOs for analog supplies and switching regulators for digital supplies. Ensure proper decoupling with 100nF and 10uF capacitors close to each supply pin. Refer to the datasheet for recommended supply sequencing.
The CSP-BGA package has a thermal pad that must be soldered to a ground plane with thermal vias. For high-power operation, ensure adequate copper area and airflow. The thermal resistance is specified in the datasheet per JEDEC JESD51-12. Monitor junction temperature to avoid overheating.
For RF performance, use controlled impedance traces for TX and RX lines. Keep RF traces short and shielded. Place the device away from noisy digital circuits. Use a solid ground plane and minimize parasitic capacitance. Follow the layout guidelines in the datasheet.
Информация о соответствии
RoHS compliant per distributor data. Other compliance information not specified in the provided data.
