AKM

AK5358BET - 24-Bit Stereo ADC, 8-96kHz | AKM

Артикул: AK5358BET ✗ Снят с производства
5 V Vdss 16-pin TSSOP Package
MOQ: 1 |

AK5358BET Обзор

Asahi Kasei Microdevices/AKM AK5358BET is a 24-bit stereo delta-sigma analog-to-digital converter with a sampling rate range of 8 kHz to 96 kHz, a 5 V analog and digital supply, and a 16-pin TSSOP package with 0.65 mm pitch. It is designed for consumer and professional audio systems that require simultaneous conversion of left and right analog audio channels into 24-bit digital data.

An audio ADC is a mixed-signal data converter that samples an analog input, quantizes each sample to a digital value, and applies digital filtering before transferring the result through a digital audio interface. The AK5358BET belongs to the ADC/DAC and audio data-converter hierarchy, where its role is to bridge analog microphones, line-level sources, and playback equipment with digital audio processors, codecs, recording systems, and digital consoles.

The principal features of the AK5358BET include 24-bit resolution, dual-channel operation, an 8 kHz to 96 kHz sampling-rate range, 5 V operation, and an I2S-compatible digital interface. These parameters suit applications where the source bandwidth is below the converter's usable audio range and where the system requires more precision than a conventional low-resolution multimedia converter. The dual-channel architecture allows left and right signals to be captured in one compact package.

The converter uses enhanced dual-bit delta-sigma conversion techniques to balance resolution, digital filtering, and implementation cost. Its digital interface permits the converted stereo audio stream to be connected to an audio codec, digital mixer, signal processor, or microcontroller. Designers should pay attention to the required master clock, bit clock, and frame-clock relationships because correct interface timing is essential for recovering synchronized 24-bit samples.

Typical applications include professional audio recording equipment, consumer audio systems, digital mixing consoles, microphone preamplifier and analog-to-digital conversion stages, multimedia equipment, and industrial audio acquisition systems. The AK5358BET is especially relevant when a system needs a dedicated stereo 24-bit ADC rather than the conversion functions of a broader audio codec.

A critical implementation consideration is preserving the analog signal path before conversion. Keep input traces short, maintain the layout recommended by the manufacturer datasheet, provide stable analog and digital supplies, and place decoupling capacitors close to their associated pins. Confirm interface voltage levels and clock relationships against the device data sheet before finalizing the PCB.

This product page organizes the AK5358BET specifications, verified source links, replacement options, application guidance, and design considerations into an engineering-focused resource. It also distinguishes confirmed drop-in candidates from family variants so that replacement decisions can be made against package, resolution, sampling-rate, and interface requirements rather than part-name similarity alone.

Аналоги без доработки для AK5358BET — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с AK5358BET (тот же форм-фактор и посадочное место) — отличается по Package, Sampling Rate Range.

AKM
Sampling Rate Range: 4 kHz to 96 kHz
Сравнить с AK5358BET →
AKM (Asahi Kasei Microdevices)
Package: 16-pin TSSOP, 0.65 mm pitch
Сравнить с AK5358BET →

AK5381ET

✅ Прямая замена
AKM (Asahi Kasei Microdevices)
📦 16-TSSOP
Stereo delta-sigma audio ADC · 24 bit · 96 kHz · 4 kHz · 2 channels · 2.7 V to 5.5 V · Enhanced dual-bit delta-sigma · I2S

Уточнить цену

Открыть даташит →

AK5357ET

✅ Прямая замена
AKM
📦 16-TSSOP
Stereo audio analog-to-digital converter · Enhanced dual-bit delta-sigma · 24 bit · 96 kHz · 4 kHz · 4 kHz to 96 kHz · I2S · 2 channels

Уточнить цену

Открыть даташит →

AK5358AET

✅ Прямая замена ⚠️ Характеристики не проверены
AKM (Asahi Kasei Microdevices)
📦 16-TSSOP
Stereo audio A/D converter · 24 bit · 8 kHz to 96 kHz · 8 kHz · 96 kHz · Enhanced dual-bit delta-sigma · 2 channels · I2S

Уточнить цену

Открыть даташит →

AK5359ET

✅ Прямая замена ⚠️ Характеристики не проверены
AKM (Asahi Kasei Microdevices)
📦 16-TSSOP
Stereo audio ADC · Enhanced dual-bit delta-sigma · 24 bit · 192 kHz · 8 kHz to 216 kHz · 2 stereo channels · I2S · 4.5 V to 5.5 V

Уточнить цену

Открыть даташит →

AK5358BET Максимальные параметры и электрические характеристики

ADC Type Stereo delta-sigma ADC
Разрешение 24 bit
Number of Channels 2 channels
Sampling Rate Range 8 kHz to 96 kHz
Maximum Sampling Rate 96 kHz
Digital Interface I2S
Напряжение питания 5 V
Корпус 16-pin TSSOP
Package Pitch 0.65 mm
Рабочая температура -20 C to +85 C
Тип монтажа Surface mount
Conversion Technology Enhanced dual-bit delta-sigma
Lead-Free Construction Lead-free
Halogen-Free Construction Halogen-free

Руководство по цоколевке AK5358BET в корпусе 0.65 mm

Цоколевка для AK5358BET (корпус 0.65 mm). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 0.65 mm для AK5358BET

Нет подробных данных о распиновке для AK5358BET.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

AK5358BET подходит для 6 применениеs: Professional Audio Recording, Digital Mixing Console, USB Audio Interface, Microphone Preamplifier Interface, Consumer Audio Equipment, Industrial Audio Acquisition.

🎧

Professional Audio Recording

The AK5358BET fits two-channel recording front ends that require 24-bit conversion and sampling rates from 8 kHz to 96 kHz. Its stereo delta-sigma architecture allows left and right microphone or line-level signals to enter one converter while the I2S output connects directly to a digital recorder, mixer, or signal processor. The 96 kHz maximum rate supports high-resolution audio workflows without requiring a multichannel converter arrangement. Designers should verify the AK5358B input topology and configure the master, bit, and frame clocks according to the manufacturer reference circuit.

🎚️

Digital Mixing Console

The AK5358BET is suitable for line-level stereo input channels in a digital mixing console because it combines 24-bit resolution with a compact 16-pin TSSOP footprint. Its 8 kHz-to-96 kHz range accommodates voice channels, conventional program material, and high-rate surround or mastering workflows. The I2S interface simplifies connection to a digital mixer or processing backplane, while the dedicated ADC avoids allocating a complete audio codec when only analog-to-digital conversion is required. Input conditioning, grounding, and clock routing remain central to achieving clean console channels.

🖥️

USB Audio Interface

The AK5358BET can serve as the analog input stage of a USB or bus-powered audio interface when the design requires higher-resolution stereo capture than a basic multimedia codec provides. Its 24-bit output and I2S interface can feed a USB audio controller, digital signal processor, or microcontroller-based interface. The 8 kHz-to-96 kHz range supports speech, music production, and monitoring tasks. Because this is a standalone ADC rather than a USB controller, clock synchronization, audio buffering, and USB transfer behavior must be implemented separately in the host device.

🎤

Microphone Preamplifier Interface

The AK5358BET is appropriate for the conversion stage following a balanced microphone preamplifier when both stereo channels must be digitized accurately. The 24-bit resolution preserves low-level signal detail, and the 8 kHz-to-96 kHz range allows the same converter family to address speech or professional recording rates. Its two-channel structure reduces the number of converter packages needed for left and right microphone channels. The analog path must still account for microphone gain, common-mode rejection, anti-alias filtering, and the grounding arrangement shown in the manufacturer application guidance.

📱

Consumer Audio Equipment

The AK5358BET supports consumer audio products requiring a dedicated stereo 24-bit ADC for source capture. The broad 8 kHz-to-96 kHz range covers low-rate voice products through high-fidelity playback and recording devices, while the 16-pin TSSOP package supports compact board layouts. Its I2S output can connect to a digital audio processor before final amplification. Designers should compare the converter's clock requirements with the selected digital processor and preserve analog input isolation from the high-current output stages to prevent unwanted behavior in sensitive audio paths.

🏭

Industrial Audio Acquisition

The AK5358BET can be used in industrial audio-acquisition equipment that monitors two analog channels and transfers the results through an I2S link. Its 24-bit resolution and 96 kHz maximum sampling rate are suitable for equipment requiring more precision than a general-purpose comparator or low-resolution sensor interface. An embedded processor can consume the digital stream for spectral analysis, event detection, or diagnostics. Industrial implementations should pay particular attention to electrical isolation, supply integrity, grounding, and protection from external wiring because those factors can dominate the converter's apparent performance in the completed system.

What is the AK5358BET?
The AK5358BET is a 24-bit, dual-channel delta-sigma audio analog-to-digital converter with a sampling-rate range of 8 kHz to 96 kHz. According to the manufacturer datasheet, it uses enhanced dual-bit delta-sigma techniques, operates from a nominal 5 V supply, and provides an I2S digital audio interface in a 16-pin TSSOP package. It is intended for consumer and professional audio systems.
What is the sampling rate and resolution of AK5358BET?
The AK5358BET supports sampling rates from 8 kHz through 96 kHz and converts each analog channel to 24-bit digital data. According to the AK5358B family datasheet, the wide sampling-rate range covers voice, conventional CD-rate audio, and higher-rate professional audio streams while retaining dedicated stereo conversion in one package.
Where can I download the AK5358BET datasheet PDF?
The AK5358BET datasheet PDF is available through the manufacturer-document link listed on this page. The document describes the AK5358B family, including its enhanced dual-bit delta-sigma architecture, stereo 24-bit conversion, I2S interface, electrical characteristics, pin functions, and application information. Use the PDF for the complete pin table and recommended external-circuit layouts.
What package and pin count does the AK5358BET use?
The AK5358BET is packaged in a 16-pin TSSOP with a 0.65 mm lead pitch. The package is lead-free, halogen-free, and intended for surface-mount assembly. Because the device has separate analog and digital functions, PCB planning should preserve the land pattern, pin numbering, and analog-versus-digital layout guidance in the manufacturer datasheet.
Can AK5381ET replace AK5358BET without changing the PCB?
AK5381ET is identified by the manufacturer-related comparison information as a complete replacement whose terminals and package are consistent with the AK5358BET. It is therefore the strongest confirmed drop-in candidate, but final approval should include checking supply voltage, master-clock requirements, data format, and the highest sampling rate required by the original design.
What is the difference between AK5358BET and AK5381ET?
The AK5358BET is a 24-bit stereo ADC covering 8 kHz to 96 kHz, while the AK5381ET appears in comparison information as a pin- and package-compatible replacement with consistent main performance characteristics. According to the cited AKM comparison, existing circuitry does not require modification, although clocking and interface settings should still be reviewed before production use.
When should I choose AK5358BET over AK5381ET?
Choose AK5358BET when an existing design targets its 24-bit, 8 kHz-to-96 kHz conversion range and its documented I2S configuration. Choose AK5381ET when a confirmed pin-compatible part is needed and its clock and interface requirements fit the new design. For new professional audio systems that may require sampling rates above 96 kHz, review the AK5381ET specifications rather than assuming interchangeability.
What can replace AK5358BET?
AK5381ET is the best documented drop-in replacement because the comparison information states that its terminals and package are consistent and that replacement does not require circuit modification. AK5357ET is another same-family comparison candidate, but it may differ in resolution or interface behavior and should be qualified against the original clocking, output format, and signal-path requirements.
Is AK5358BET suitable for professional audio equipment?
Yes, the AK5358BET is explicitly described for consumer-to-professional audio systems and provides 24-bit stereo conversion over 8 kHz to 96 kHz. Its dedicated ADC function, dual-channel architecture, and I2S output suit recording, mixing, and signal-processing equipment. Production designs should still verify analog input topology, clock ratios, and decoupling using the manufacturer datasheet.
Where can I request a quote for AK5358BET?
Use the Request a Quote form on this page to request current AK5358BET pricing, availability, lead time, and obsolete-part sourcing options. Because the device is listed as obsolete, availability may depend on remaining factory or inventory stock. Provide the required quantity, date code tolerance, package suffix, and inspection requirements in the request.
What is the lead time for the obsolete AK5358BET?
The current lead time for the obsolete AK5358BET should be requested through the Request a Quote form on this page. Lead time depends on remaining factory stock, authorized-channel availability, date-code requirements, and shipment quantity. The form lets purchasing confirm the latest schedule without relying on a potentially stale catalog availability statement.
Is AK5358BET currently in stock?
Current AK5358BET stock should be confirmed through the Request a Quote form on this page. The AK5358BET is categorized as obsolete, so availability can change quickly and may depend on residual inventory rather than normal production allocation. Include your required quantity, acceptable date codes, packaging preference, and target delivery date in the request.
What are the key specifications of AK5358BET that engineers should know?
The key AK5358BET specifications are 24-bit resolution, two analog channels, an 8 kHz-to-96 kHz sampling-rate range, 5 V nominal supply, I2S output, and a 16-pin 0.65 mm-pitch TSSOP package. According to the AK5358B family datasheet, the converter employs enhanced dual-bit delta-sigma techniques and is designed for consumer and professional audio equipment.
Is AK5358BET the same as AK5357ET?
No. The AK5358BET is a 24-bit stereo ADC supporting 8 kHz to 96 kHz, while AK5357ET is a different member of the AKM converter family and should not be treated as identical without reviewing its resolution, sampling range, clocking, and digital interface. AK5381ET has the clearest published drop-in compatibility statement for the AK5358BET.
Does the AK5358BET support lead-free PCB assembly?
Yes, the AK5358BET is described as a halogen-free, lead-free, plastic TSSOP-16 package. The component therefore fits lead-free surface-mount assembly requirements for the package construction. RoHS and REACH declarations should still be confirmed against the current manufacturer environmental documentation for the specific shipping lot.
How should the AK5358BET analog and digital layout be separated?
Keep the AK5358BET analog input traces short and place the required input and supply capacitors close to their associated pins. Route the I2S clock and data signals away from sensitive analog inputs, maintain a clear return path, and use the reference layout in the manufacturer datasheet. These steps reduce susceptibility to switching noise, clock coupling, and ground-current interaction.

Справочные инженерные данные для AK5358BET — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose AK5358BET for an existing 24-bit stereo audio design operating between 8 kHz and 96 kHz with a 5 V supply and I2S interface. It is particularly appropriate when a dedicated ADC is preferred over a multifunction audio codec and the 16-pin TSSOP footprint matches the PCB. Consider AK5381ET first when a confirmed complete replacement is needed, but validate clock ratios, maximum sampling rate, and startup behavior against the original circuit. Treat AK5357ET as a same-family candidate only after checking resolution and interface timing; treat AK5358AET and AK5359ET as alternatives requiring datasheet-level qualification. For new designs requiring more than 96 kHz, multi-channel conversion, integrated digital volume control, or a different voltage range, review a current converter family rather than relying on package similarity.

Сравнение с аналогами

Параметр Этот товар AK5381ET AK5357ET AK5358AET AK5359ET
Brand Asahi Kasei Microdevices/AKM Asahi Kasei Microdevices/AKM Asahi Kasei Microdevices/AKM Asahi Kasei Microdevices/AKM Asahi Kasei Microdevices/AKM
Package 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP
Drop-In Compatibility Reference device Published complete replacement with consistent terminals and package Same-family comparison candidate Same-family candidate Same-family candidate

Ключевые отличия

  • Higher stated resolution than lower-resolution family comparisons (против AK5357ET)
  • Documented 96 kHz maximum sampling rate (против AK5358AET)
  • Clearer published complete-replacement claim (против AK5359ET)
  • Dedicated stereo ADC avoids codec overhead (против AK5358AET)

Заметки по проектированию

Separate the AK5358BET analog input routing from the digital clock and data paths. Keep analog traces short, provide a continuous return path, and avoid running I2S signals beneath sensitive input nodes. Place the input, supply, and required bypass capacitors adjacent to their corresponding pins. The manufacturer datasheet reference layout should govern trace geometry, grounding, and component placement where those recommendations differ from general layout practice.

Use separate, well-decoupled paths for the analog and digital supplies even though the device has a nominal 5 V supply. Place the recommended bypass capacitors close to the supply pins and keep supply-plane or supply-trace impedance low over the converter's full 8 kHz-to-96 kHz operating range. Verify the allowable analog and digital voltage ranges and their sequencing requirements in the datasheet before adding external circuitry that can disturb startup behavior.

The I2S interface depends on a consistent master clock, bit clock, and frame clock. Confirm the required clock ratios and data timing against the operating sampling rate, and route these signals as controlled-impedance nets if the board uses long traces or a high clock frequency. Avoid excessive loading, unnecessary stubs, and clock routing through the analog input region to reduce data errors and coupling into the converted channels.

Do not treat a family member with the same TSSOP outline as automatically interchangeable. Before substituting an AK5358-family or AKM device, compare pin functions, supply limits, resolution, supported sampling rates, clock ratios, data alignment, and digital-filter behavior. For AK5381ET, the published replacement statement supports physical compatibility, but the complete system configuration still requires an engineering review.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Yes
Без галогенов
Yes
Конфликтные минералы
Unknown

The AK5358BET package is described as lead-free and halogen-free. RoHS, REACH, and conflict-minerals declarations are not stated in the cited technical pages.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

AK5358BET datasheet AK5358BET pinout AK5358BET datasheet pdf AK5358BET specifications AK5358BET 24 bit ADC AK5358BET 8kHz 96kHz AK5358BET I2S AK5358BET TSSOP-16 AK5358BET equivalent AK5358BET replacement AK5358BET vs AK5381ET AK5358BET price AK5358BET obsolete replacement

Связанные компоненты & термины

Asahi Kasei Microdevices/AKM AK5358BET AK5358B AK5381ET AK5357ET AK5358AET AK5359ET 24-bit ADC stereo ADC delta-sigma converter enhanced dual-bit delta-sigma audio data converter ADC/DAC I2S 5 V supply 8 kHz sampling rate 96 kHz sampling rate TSSOP-16 TSSOP package surface-mount package consumer audio professional audio lead-free halogen-free
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ