AK5358BET - 24-Bit Stereo ADC, 8-96kHz | AKM
부품 번호: AK5358BET ✗ 단종AK5358BET 개요
An audio ADC is a mixed-signal data converter that samples an analog input, quantizes each sample to a digital value, and applies digital filtering before transferring the result through a digital audio interface. The AK5358BET belongs to the ADC/DAC and audio data-converter hierarchy, where its role is to bridge analog microphones, line-level sources, and playback equipment with digital audio processors, codecs, recording systems, and digital consoles.
The principal features of the AK5358BET include 24-bit resolution, dual-channel operation, an 8 kHz to 96 kHz sampling-rate range, 5 V operation, and an I2S-compatible digital interface. These parameters suit applications where the source bandwidth is below the converter's usable audio range and where the system requires more precision than a conventional low-resolution multimedia converter. The dual-channel architecture allows left and right signals to be captured in one compact package.
The converter uses enhanced dual-bit delta-sigma conversion techniques to balance resolution, digital filtering, and implementation cost. Its digital interface permits the converted stereo audio stream to be connected to an audio codec, digital mixer, signal processor, or microcontroller. Designers should pay attention to the required master clock, bit clock, and frame-clock relationships because correct interface timing is essential for recovering synchronized 24-bit samples.
Typical applications include professional audio recording equipment, consumer audio systems, digital mixing consoles, microphone preamplifier and analog-to-digital conversion stages, multimedia equipment, and industrial audio acquisition systems. The AK5358BET is especially relevant when a system needs a dedicated stereo 24-bit ADC rather than the conversion functions of a broader audio codec.
A critical implementation consideration is preserving the analog signal path before conversion. Keep input traces short, maintain the layout recommended by the manufacturer datasheet, provide stable analog and digital supplies, and place decoupling capacitors close to their associated pins. Confirm interface voltage levels and clock relationships against the device data sheet before finalizing the PCB.
This product page organizes the AK5358BET specifications, verified source links, replacement options, application guidance, and design considerations into an engineering-focused resource. It also distinguishes confirmed drop-in candidates from family variants so that replacement decisions can be made against package, resolution, sampling-rate, and interface requirements rather than part-name similarity alone.
드롭인 대체품: AK5358BET — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: AK5358BET (동일 폼 팩터 및 풋프린트) — 차이점: Package, Sampling Rate Range.
AK5381ET
✅ 드롭인가격 문의
데이터시트 보기 →AK5357ET
✅ 드롭인가격 문의
데이터시트 보기 →AK5358AET
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →AK5359ET
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →AK5358BET 최대 정격 & 전기적 특성
| ADC Type | Stereo delta-sigma ADC |
| 분해능 | 24 bit |
| Number of Channels | 2 channels |
| Sampling Rate Range | 8 kHz to 96 kHz |
| Maximum Sampling Rate | 96 kHz |
| Digital Interface | I2S |
| 공급 전압 | 5 V |
| 패키지 | 16-pin TSSOP |
| Package Pitch | 0.65 mm |
| 동작 온도 | -20 C to +85 C |
| 실장 유형 | Surface mount |
| Conversion Technology | Enhanced dual-bit delta-sigma |
| Lead-Free Construction | Lead-free |
| Halogen-Free Construction | Halogen-free |
AK5358BET 0.65 mm 핀 구성 가이드
AK5358BET(0.65 mm 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AK5358BET.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AK5358BET 적합 용도: 6 애플리케이션s: Professional Audio Recording, Digital Mixing Console, USB Audio Interface, Microphone Preamplifier Interface, Consumer Audio Equipment, Industrial Audio Acquisition.
Professional Audio Recording
The AK5358BET fits two-channel recording front ends that require 24-bit conversion and sampling rates from 8 kHz to 96 kHz. Its stereo delta-sigma architecture allows left and right microphone or line-level signals to enter one converter while the I2S output connects directly to a digital recorder, mixer, or signal processor. The 96 kHz maximum rate supports high-resolution audio workflows without requiring a multichannel converter arrangement. Designers should verify the AK5358B input topology and configure the master, bit, and frame clocks according to the manufacturer reference circuit.
추천
Digital Mixing Console
The AK5358BET is suitable for line-level stereo input channels in a digital mixing console because it combines 24-bit resolution with a compact 16-pin TSSOP footprint. Its 8 kHz-to-96 kHz range accommodates voice channels, conventional program material, and high-rate surround or mastering workflows. The I2S interface simplifies connection to a digital mixer or processing backplane, while the dedicated ADC avoids allocating a complete audio codec when only analog-to-digital conversion is required. Input conditioning, grounding, and clock routing remain central to achieving clean console channels.
추천
USB Audio Interface
The AK5358BET can serve as the analog input stage of a USB or bus-powered audio interface when the design requires higher-resolution stereo capture than a basic multimedia codec provides. Its 24-bit output and I2S interface can feed a USB audio controller, digital signal processor, or microcontroller-based interface. The 8 kHz-to-96 kHz range supports speech, music production, and monitoring tasks. Because this is a standalone ADC rather than a USB controller, clock synchronization, audio buffering, and USB transfer behavior must be implemented separately in the host device.
추천
Microphone Preamplifier Interface
The AK5358BET is appropriate for the conversion stage following a balanced microphone preamplifier when both stereo channels must be digitized accurately. The 24-bit resolution preserves low-level signal detail, and the 8 kHz-to-96 kHz range allows the same converter family to address speech or professional recording rates. Its two-channel structure reduces the number of converter packages needed for left and right microphone channels. The analog path must still account for microphone gain, common-mode rejection, anti-alias filtering, and the grounding arrangement shown in the manufacturer application guidance.
추천
Consumer Audio Equipment
The AK5358BET supports consumer audio products requiring a dedicated stereo 24-bit ADC for source capture. The broad 8 kHz-to-96 kHz range covers low-rate voice products through high-fidelity playback and recording devices, while the 16-pin TSSOP package supports compact board layouts. Its I2S output can connect to a digital audio processor before final amplification. Designers should compare the converter's clock requirements with the selected digital processor and preserve analog input isolation from the high-current output stages to prevent unwanted behavior in sensitive audio paths.
추천
Industrial Audio Acquisition
The AK5358BET can be used in industrial audio-acquisition equipment that monitors two analog channels and transfers the results through an I2S link. Its 24-bit resolution and 96 kHz maximum sampling rate are suitable for equipment requiring more precision than a general-purpose comparator or low-resolution sensor interface. An embedded processor can consume the digital stream for spectral analysis, event detection, or diagnostics. Industrial implementations should pay particular attention to electrical isolation, supply integrity, grounding, and protection from external wiring because those factors can dominate the converter's apparent performance in the completed system.
추천
추천 제품 요약
엔지니어링 참조 데이터: AK5358BET — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AK5381ET | AK5357ET | AK5358AET | AK5359ET |
|---|---|---|---|---|---|
| Brand | Asahi Kasei Microdevices/AKM | Asahi Kasei Microdevices/AKM | Asahi Kasei Microdevices/AKM | Asahi Kasei Microdevices/AKM | Asahi Kasei Microdevices/AKM |
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Drop-In Compatibility | Reference device | Published complete replacement with consistent terminals and package | Same-family comparison candidate | Same-family candidate | Same-family candidate |
주요 차별점
- Higher stated resolution than lower-resolution family comparisons (vs AK5357ET)
- Documented 96 kHz maximum sampling rate (vs AK5358AET)
- Clearer published complete-replacement claim (vs AK5359ET)
- Dedicated stereo ADC avoids codec overhead (vs AK5358AET)
설계 노트
Separate the AK5358BET analog input routing from the digital clock and data paths. Keep analog traces short, provide a continuous return path, and avoid running I2S signals beneath sensitive input nodes. Place the input, supply, and required bypass capacitors adjacent to their corresponding pins. The manufacturer datasheet reference layout should govern trace geometry, grounding, and component placement where those recommendations differ from general layout practice.
Use separate, well-decoupled paths for the analog and digital supplies even though the device has a nominal 5 V supply. Place the recommended bypass capacitors close to the supply pins and keep supply-plane or supply-trace impedance low over the converter's full 8 kHz-to-96 kHz operating range. Verify the allowable analog and digital voltage ranges and their sequencing requirements in the datasheet before adding external circuitry that can disturb startup behavior.
The I2S interface depends on a consistent master clock, bit clock, and frame clock. Confirm the required clock ratios and data timing against the operating sampling rate, and route these signals as controlled-impedance nets if the board uses long traces or a high clock frequency. Avoid excessive loading, unnecessary stubs, and clock routing through the analog input region to reduce data errors and coupling into the converted channels.
Do not treat a family member with the same TSSOP outline as automatically interchangeable. Before substituting an AK5358-family or AKM device, compare pin functions, supply limits, resolution, supported sampling rates, clock ratios, data alignment, and digital-filter behavior. For AK5381ET, the published replacement statement supports physical compatibility, but the complete system configuration still requires an engineering review.
규정 준수 정보
The AK5358BET package is described as lead-free and halogen-free. RoHS, REACH, and conflict-minerals declarations are not stated in the cited technical pages.