AK5358BET - 24-Bit Stereo ADC, 8-96kHz | AKM
MPN: AK5358BET ✗ Son Kullanım ZamanıAK5358BET Genel Bakış
An audio ADC is a mixed-signal data converter that samples an analog input, quantizes each sample to a digital value, and applies digital filtering before transferring the result through a digital audio interface. The AK5358BET belongs to the ADC/DAC and audio data-converter hierarchy, where its role is to bridge analog microphones, line-level sources, and playback equipment with digital audio processors, codecs, recording systems, and digital consoles.
The principal features of the AK5358BET include 24-bit resolution, dual-channel operation, an 8 kHz to 96 kHz sampling-rate range, 5 V operation, and an I2S-compatible digital interface. These parameters suit applications where the source bandwidth is below the converter's usable audio range and where the system requires more precision than a conventional low-resolution multimedia converter. The dual-channel architecture allows left and right signals to be captured in one compact package.
The converter uses enhanced dual-bit delta-sigma conversion techniques to balance resolution, digital filtering, and implementation cost. Its digital interface permits the converted stereo audio stream to be connected to an audio codec, digital mixer, signal processor, or microcontroller. Designers should pay attention to the required master clock, bit clock, and frame-clock relationships because correct interface timing is essential for recovering synchronized 24-bit samples.
Typical applications include professional audio recording equipment, consumer audio systems, digital mixing consoles, microphone preamplifier and analog-to-digital conversion stages, multimedia equipment, and industrial audio acquisition systems. The AK5358BET is especially relevant when a system needs a dedicated stereo 24-bit ADC rather than the conversion functions of a broader audio codec.
A critical implementation consideration is preserving the analog signal path before conversion. Keep input traces short, maintain the layout recommended by the manufacturer datasheet, provide stable analog and digital supplies, and place decoupling capacitors close to their associated pins. Confirm interface voltage levels and clock relationships against the device data sheet before finalizing the PCB.
This product page organizes the AK5358BET specifications, verified source links, replacement options, application guidance, and design considerations into an engineering-focused resource. It also distinguishes confirmed drop-in candidates from family variants so that replacement decisions can be made against package, resolution, sampling-rate, and interface requirements rather than part-name similarity alone.
Drop-in alternatifler için AK5358BET — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller AK5358BET (aynı form faktörü ve ayağa oturma) — farklı olan Package, Sampling Rate Range.
AK5381ET
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AK5357ET
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AK5358AET
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AK5359ET
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AK5358BET Maksimum Değerlendirmeler & Elektriksel Özellikler
| ADC Type | Stereo delta-sigma ADC |
| Çözünürlük | 24 bit |
| Number of Channels | 2 channels |
| Sampling Rate Range | 8 kHz to 96 kHz |
| Maximum Sampling Rate | 96 kHz |
| Digital Interface | I2S |
| Besleme Gerilimi | 5 V |
| Paket | 16-pin TSSOP |
| Package Pitch | 0.65 mm |
| İşletim Sıcaklığı | -20 C to +85 C |
| Montaj Türü | Surface mount |
| Conversion Technology | Enhanced dual-bit delta-sigma |
| Lead-Free Construction | Lead-free |
| Halogen-Free Construction | Halogen-free |
AK5358BET 0.65 mm Pin Yapısı Kılavuzu
AK5358BET (0.65 mm paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: AK5358BET.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
AK5358BET için uygundur 6 uygulamas: Professional Audio Recording, Digital Mixing Console, USB Audio Interface, Microphone Preamplifier Interface, Consumer Audio Equipment, Industrial Audio Acquisition.
Professional Audio Recording
The AK5358BET fits two-channel recording front ends that require 24-bit conversion and sampling rates from 8 kHz to 96 kHz. Its stereo delta-sigma architecture allows left and right microphone or line-level signals to enter one converter while the I2S output connects directly to a digital recorder, mixer, or signal processor. The 96 kHz maximum rate supports high-resolution audio workflows without requiring a multichannel converter arrangement. Designers should verify the AK5358B input topology and configure the master, bit, and frame clocks according to the manufacturer reference circuit.
Önerilen
Digital Mixing Console
The AK5358BET is suitable for line-level stereo input channels in a digital mixing console because it combines 24-bit resolution with a compact 16-pin TSSOP footprint. Its 8 kHz-to-96 kHz range accommodates voice channels, conventional program material, and high-rate surround or mastering workflows. The I2S interface simplifies connection to a digital mixer or processing backplane, while the dedicated ADC avoids allocating a complete audio codec when only analog-to-digital conversion is required. Input conditioning, grounding, and clock routing remain central to achieving clean console channels.
Önerilen
USB Audio Interface
The AK5358BET can serve as the analog input stage of a USB or bus-powered audio interface when the design requires higher-resolution stereo capture than a basic multimedia codec provides. Its 24-bit output and I2S interface can feed a USB audio controller, digital signal processor, or microcontroller-based interface. The 8 kHz-to-96 kHz range supports speech, music production, and monitoring tasks. Because this is a standalone ADC rather than a USB controller, clock synchronization, audio buffering, and USB transfer behavior must be implemented separately in the host device.
Önerilen
Microphone Preamplifier Interface
The AK5358BET is appropriate for the conversion stage following a balanced microphone preamplifier when both stereo channels must be digitized accurately. The 24-bit resolution preserves low-level signal detail, and the 8 kHz-to-96 kHz range allows the same converter family to address speech or professional recording rates. Its two-channel structure reduces the number of converter packages needed for left and right microphone channels. The analog path must still account for microphone gain, common-mode rejection, anti-alias filtering, and the grounding arrangement shown in the manufacturer application guidance.
Önerilen
Consumer Audio Equipment
The AK5358BET supports consumer audio products requiring a dedicated stereo 24-bit ADC for source capture. The broad 8 kHz-to-96 kHz range covers low-rate voice products through high-fidelity playback and recording devices, while the 16-pin TSSOP package supports compact board layouts. Its I2S output can connect to a digital audio processor before final amplification. Designers should compare the converter's clock requirements with the selected digital processor and preserve analog input isolation from the high-current output stages to prevent unwanted behavior in sensitive audio paths.
Önerilen
Industrial Audio Acquisition
The AK5358BET can be used in industrial audio-acquisition equipment that monitors two analog channels and transfers the results through an I2S link. Its 24-bit resolution and 96 kHz maximum sampling rate are suitable for equipment requiring more precision than a general-purpose comparator or low-resolution sensor interface. An embedded processor can consume the digital stream for spectral analysis, event detection, or diagnostics. Industrial implementations should pay particular attention to electrical isolation, supply integrity, grounding, and protection from external wiring because those factors can dominate the converter's apparent performance in the completed system.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: AK5358BET — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | AK5381ET | AK5357ET | AK5358AET | AK5359ET |
|---|---|---|---|---|---|
| Brand | Asahi Kasei Microdevices/AKM | Asahi Kasei Microdevices/AKM | Asahi Kasei Microdevices/AKM | Asahi Kasei Microdevices/AKM | Asahi Kasei Microdevices/AKM |
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Drop-In Compatibility | Reference device | Published complete replacement with consistent terminals and package | Same-family comparison candidate | Same-family candidate | Same-family candidate |
Ana Farklılayıcılar
- Higher stated resolution than lower-resolution family comparisons (karşılaştırma:AK5357ET)
- Documented 96 kHz maximum sampling rate (karşılaştırma:AK5358AET)
- Clearer published complete-replacement claim (karşılaştırma:AK5359ET)
- Dedicated stereo ADC avoids codec overhead (karşılaştırma:AK5358AET)
Tasarım Notları
Separate the AK5358BET analog input routing from the digital clock and data paths. Keep analog traces short, provide a continuous return path, and avoid running I2S signals beneath sensitive input nodes. Place the input, supply, and required bypass capacitors adjacent to their corresponding pins. The manufacturer datasheet reference layout should govern trace geometry, grounding, and component placement where those recommendations differ from general layout practice.
Use separate, well-decoupled paths for the analog and digital supplies even though the device has a nominal 5 V supply. Place the recommended bypass capacitors close to the supply pins and keep supply-plane or supply-trace impedance low over the converter's full 8 kHz-to-96 kHz operating range. Verify the allowable analog and digital voltage ranges and their sequencing requirements in the datasheet before adding external circuitry that can disturb startup behavior.
The I2S interface depends on a consistent master clock, bit clock, and frame clock. Confirm the required clock ratios and data timing against the operating sampling rate, and route these signals as controlled-impedance nets if the board uses long traces or a high clock frequency. Avoid excessive loading, unnecessary stubs, and clock routing through the analog input region to reduce data errors and coupling into the converted channels.
Do not treat a family member with the same TSSOP outline as automatically interchangeable. Before substituting an AK5358-family or AKM device, compare pin functions, supply limits, resolution, supported sampling rates, clock ratios, data alignment, and digital-filter behavior. For AK5381ET, the published replacement statement supports physical compatibility, but the complete system configuration still requires an engineering review.
Uyumluluk Bilgisi
The AK5358BET package is described as lead-free and halogen-free. RoHS, REACH, and conflict-minerals declarations are not stated in the cited technical pages.