ATF22LV10C-10JU - 10ns Low-Voltage EEPLD | Microchip
Артикул: ATF22LV10C-10JU ✓ АктивенATF22LV10C-10JU Обзор
An EEPLD, or electrically erasable programmable logic device, is a semiconductor that stores a logic configuration in nonvolatile flash memory. It belongs to the programmable-logic-device hierarchy and provides a compact alternative to conventional AND-OR gate arrays when a design needs reconfigurable combinational or registered logic without repeatedly replacing a fixed ASIC.
The device provides 10 macrocells organized into 500 logic gates and supports a 10 ns propagation-delay grade. Its low-voltage architecture permits operation from 3.0 V to 5.5 V, while the optional power-down pin places the device into a low-consumption state with a typical standby current of 10 uA. This combination makes it useful for portable, industrial-control, and general embedded logic implementations.
The ATF22LV10C uses electrically erasable flash memory, allowing the programmed configuration to be retained when power is removed and then reprogrammed as system requirements evolve. The 28-pin PLCC package uses J-leaded surface-mount construction. Industrial-temperature operation extends from -40 C to +85 C, and guaranteed timing, supply-current, and logic-threshold parameters are specified across that range.
Typical applications include industrial control interfaces, legacy peripheral emulation, address decoding, glue logic, keyboard and display controllers, and small embedded systems that need a compact reconfigurable logic block. The 10 ns speed grade also permits operation in higher-speed control paths than slower 15 ns or 30 ns family variants, provided the complete system timing is checked.
Designers should use the pin-description table and programming guidance in the Microchip manufacturer datasheet when assigning package connections. Place decoupling close to the supply pins, keep the power-down control unambiguous, and confirm that every configured macrocell and I/O remains valid at the minimum supply voltage used by the finished product.
This product summary organizes the device's key specifications, pinout considerations, applications, and verified drop-in alternatives. It also highlights practical differences among temperature grades and related ATF22V10C devices so engineers can distinguish electrical compatibility from merely similar catalog specifications before approving a replacement.
Аналоги без доработки для ATF22LV10C-10JU — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATF22LV10C-10JU (тот же форм-фактор и посадочное место) — отличается по Package, Product Type.
ATF22LV10C-10JC
✅ Прямая заменаУточнить цену
Открыть даташит →ATF22LV10C-10JI
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ATF22LV10C-10JU Максимальные параметры и электрические характеристики
| Product Type | Low-voltage electrically erasable programmable logic device |
| Macrocells | 10 macrocells |
| Logic Capacity | 500 gates |
| Propagation Delay | 10 ns |
| Maximum System Frequency | 83.3 MHz |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Nominal Operating Voltage | 3.3 V or 5 V |
| Power-Down Standby Current | 10 uA typical |
| Memory Technology | Electrically erasable flash memory |
| Technology | Low-power CMOS |
| Power-Down Control | Optional pin-controlled power-down |
| Корпус | 28-pin PLCC, J-lead surface mount |
| Package Dimensions | 11.51 mm x 11.51 mm |
| Диапазон рабочих температур | -40 C to +85 C |
| Тип монтажа | Surface mount |
| AEC-Q100 Qualification | Not applicable |
Руководство по цоколевке ATF22LV10C-10JU в корпусе 11.51 mm x 11.51 mm
Цоколевка для ATF22LV10C-10JU (корпус 11.51 mm x 11.51 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для ATF22LV10C-10JU.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ATF22LV10C-10JU подходит для 6 применениеs: Industrial Control Interface Logic, Legacy Peripheral Emulation, Portable and Low-Power Control, Address Decoding and Bus Interfacing, Display and Keyboard Control, Embedded System Power Control.
Industrial Control Interface Logic
The ATF22LV10C-10JU is well suited to compact industrial control boards that require address decoding, command qualification, and discrete sequencing functions without a large FPGA. Its 10 macrocells and 500 gates provide enough capacity for moderate combinational and registered logic, while the 10 ns propagation delay supports an 83.3 MHz maximum system frequency. The industrial -40 C to +85 C range supports equipment expected to operate beyond room-temperature conditions. Its electrically erasable flash configuration also allows design revisions without changing the installed logic device.
Рекомендуется
Legacy Peripheral Emulation
The ATF22LV10C-10JU can reproduce small glue-logic sections formerly implemented with multiple gate arrays, allowing obsolete interface behavior to be consolidated into one programmable device. Ten macrocells and 500 gates are suitable for command decoding, register enables, and state-transition logic around legacy peripherals. The 10 ns timing grade provides more margin than slower family members, while 3.0 V to 5.5 V operation supports both 3.3 V and 5 V equipment. Flash-based configuration supports rework and design iteration where mask-programmed alternatives cannot.
Рекомендуется
Portable and Low-Power Control
The ATF22LV10C-10JU fits portable and battery-powered products that need retained logic without continuous full-power operation. Its optional pin-controlled power-down mode places the device in a state with 10 uA typical standby current, while electrically erasable flash retains the programmed configuration when power is removed. This architecture is useful for wake logic, sensor-selection logic, and compact mode-control functions. The 3.0 V to 5.5 V range supports common low-voltage rails, although active-state consumption and wake timing must be included in the system energy budget.
Рекомендуется
Address Decoding and Bus Interfacing
The ATF22LV10C-10JU can implement address decoding, chip-select generation, and peripheral enable logic around a small embedded controller. Ten macrocells provide a practical limit for moderate decode equations, while the 10 ns propagation delay can accommodate relatively fast control paths. Its 3.3 V and 5 V operating capability permits integration into mixed-voltage legacy systems, subject to the datasheet's input-threshold and output-level limits. The flash configuration is especially useful for products whose peripheral assignments vary across production variants or are changed during qualification.
Рекомендуется
Display and Keyboard Control
The ATF22LV10C-10JU is applicable to display, keyboard, and front-panel control logic requiring scan timing, command decoding, and status multiplexing. Its 500-gate capacity and 10 macrocells suit small control matrices rather than large graphics pipelines, and the 83.3 MHz maximum system frequency provides substantial timing headroom for ordinary control paths. The electrically erasable flash configuration supports multiple panel variants without changing the PCB. Designers should calculate worst-case propagation delay for each scan path and confirm that required drive levels match the selected output configuration.
Рекомендуется
Embedded System Power Control
The ATF22LV10C-10JU can serve as a compact power-sequencing and supervisory companion to a microcontroller or processor. Flash-retained logic can define rail-enable order, reset qualifiers, and fault-latching behavior, while the optional power-down control supports systems that need to reduce the logic-device contribution when the main processor is inactive. Its 3.0 V to 5.5 V operating range allows use in several industrial rail architectures. Because programmable logic timing is deterministic but device-specific, validate every qualification path against the 10 ns maximum propagation-delay specification.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATF22LV10C-10JU — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATF22LV10C-10JC | ATF22LV10C-10JI |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin PLCC | 28-pin PLCC | 28-pin PLCC |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Logic Capacity | 500 gates | 500 gates | 500 gates |
| Propagation Delay | 10 ns | 10 ns | 10 ns |
| Maximum System Frequency | 83.3 MHz | 83.3 MHz | 83.3 MHz |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Power-Down Standby Current | 10 uA typical | 10 uA typical | 10 uA typical |
| Memory Type | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory |
| Temperature Grade | -40 C to +85 C | Commercial temperature grade | Alternative temperature grade |
Ключевые отличия
- Maintains the full 10 ns electrical speed grade (против ATF22LV10C-10JC)
- Supports the same low-voltage family characteristics as the ATF22LV10C-10JI (против ATF22LV10C-10JI)
- Avoids the voltage incompatibility of the ATF22V10C family (против ATF22V10C-10JU)
Заметки по проектированию
Use the optional power-down input only when the external circuit can guarantee a defined logic level during startup, reset, and shutdown. The PLCC power-down connection is identified as pin 5 by Microchip. Leaving this control in an indeterminate state can prevent the intended 10 uA typical standby state. Account for leakage through nearby high-impedance nets and avoid relying on the power-down function as the only protection for a hazardous output state.
Place the supply bypass capacitor and programmed PLCC as close as practical to the device, and route the power-down control away from long switching nodes. PLCC J-leads provide a larger spacing than fine-pitch packages, but the device still requires careful fanout from the PCB. Keep programming and test access clear of assembly tooling, and verify that the pin-1 orientation agrees with both the PCB footprint and the package drawing before release.
Do not treat every 28-pin ATF22V10C-family device as a substitute for the ATF22LV10C-10JU. The ATF22V10C family is identified as a 5 V device, whereas the LV part supports 3.0 V to 5.5 V. Also, slower 15 ns or 30 ns grades may share a footprint but fail timing requirements. Verify supply voltage, propagation delay, temperature range, and programmed architecture together before approving a replacement.
Evaluate every configured output against its worst-case load, including the 10 ns propagation-delay limit and the datasheet's output-current and output-voltage constraints. Increase sink or source drive only when the selected output mode and device grade support it. For high-speed board-level interconnections, keep clock and control routing short, provide a defined return path, and avoid using long exposed traces adjacent to switching power nodes.
Информация о соответствии
The device is an industrial-temperature programmable logic IC and is not identified as an AEC-Q100 automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the available manufacturer or product-page records.