ATF22V10CZ-15PI - 15ns 500-Gate EEPLD | Microchip
Артикул: ATF22V10CZ-15PI ✓ АктивенATF22V10CZ-15PI Обзор
An electrically erasable programmable logic device, or EEPLD, belongs to the programmable-logic hierarchy that includes PLD, SPLD, CPLD, and FPGA technologies. Unlike a fixed gate array, an EEPLD stores a logic configuration in nonvolatile Flash memory. This allows the same physical device to implement different Boolean, control, decoding, or glue-logic functions, while retaining its configuration when power is removed.
The ATF22V10CZ-15PI belongs to the ATF22V10C family and provides 10 macrocells with a stated 500-gate capacity. Its 15 ns speed designation makes it appropriate for control logic requiring faster response than the base ATF22V10C speed grade. Electrically erasable Flash-memory technology supports configuration changes without a dedicated programmer socket and avoids the ultraviolet-erase requirement associated with older erasable PLDs.
The device operates from 5 V and is identified as an industrial-temperature-grade component. Its 24-PDIP through-hole construction supports conventional perforated-board assembly, educational prototyping, legacy control systems, and repair or modernization work where a surface-mount package would be impractical. The product-page information identifies the device as an EEPLD with a high-speed 500-gate implementation and 10 macrocells.
Typical uses include address decoding, peripheral interfacing, state-machine control, data-routing logic, and compact combinational or sequential logic for industrial and instrumentation equipment. It is particularly useful when a board already has an ATF22V10-compatible footprint and where nonvolatile reconfiguration is valuable during commissioning, maintenance, or product-variant management.
Designers should preserve the ATF22V10C supply-voltage and timing constraints, use the manufacturer's recommended programming algorithm, and verify every connected pin against the 24-PDIP pin-description table. Because the package is through-hole, pay attention to lead spacing and drilling dimensions before substituting it on an existing assembly.
This page combines the exact device identity, package information, speed and macrocell characteristics with engineering guidance for programming, PCB compatibility, and selection among pin-compatible ATF22V10C options. It also provides practical sourcing and replacement guidance for engineers maintaining legacy programmable-logic designs.
Аналоги без доработки для ATF22V10CZ-15PI — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
ATF22V10CZ-15PC
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ATF22V10CZ-15PJ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ATF22V10CZ-12PC
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ATF22V10CZ-10PC
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ATF22V10CZ-20PC
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ATF22V10CZ-15PI Максимальные параметры и электрические характеристики
| Device Type | Electrically Erasable Programmable Logic Device (EEPLD) |
| Programmable Logic Architecture | Simple Programmable Logic Device (SPLD) |
| Configuration Memory Technology | Electrically Erasable Flash memory |
| Logic Capacity | 500 gates |
| Macrocell Count | 10 macrocells |
| Propagation Delay | 15 ns |
| Рабочее напряжение питания | 5 V |
| Maximum Operating Frequency | 83.3 MHz |
| Package Type | 24-PDIP |
| Package Form | Rectangular dual in-line through-hole package |
| Number of Terminals | 24 terminals |
| Lead Spacing | 0.300 in (7.62 mm) |
| Temperature Grade | Industrial |
| Packaging | Tube |
| Product Series | ATF22V10C |
| Тип монтажа | Through-hole |
Руководство по цоколевке ATF22V10CZ-15PI в корпусе rectangular dual in-line through-hole package
Цоколевка для ATF22V10CZ-15PI (корпус rectangular dual in-line through-hole package). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для ATF22V10CZ-15PI.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ATF22V10CZ-15PI подходит для 6 применениеs: Industrial Address Decoding, Peripheral Interface Control, Legacy Test Equipment Control, Appliance and Control Logic, Data Routing and Signal Conditioning, Educational and Prototype Logic.
Industrial Address Decoding
The ATF22V10CZ-15PI fits industrial address-decoding and memory-select logic because its 10 macrocells can implement multiple Boolean decoding equations in one 24-PDIP device. Its 15 ns propagation delay provides defined response time for ordinary control paths, while the 5 V supply matches established TTL-compatible industrial boards. A designer can place it beside memory, I/O expanders, and latch logic to consolidate repetitive select functions. The 500-gate capacity should be checked against the complete equations and product-term allocation. Program the Flash configuration using the ATF22V10C procedure, verify every decode equation, and include power-up and held-output states in system validation.
Рекомендуется
Peripheral Interface Control
The ATF22V10CZ-15PI can consolidate control sequencing for slow industrial peripherals, relay drivers, counters, and discrete I/O interfaces. Ten macrocells are suitable for compact state machines and conditional output logic where replacing many individual gate packages improves maintainability. The 15 ns speed is well matched to mechanical or low-bandwidth peripheral timing, while the industrial temperature designation supports controlled industrial environments. Place input conditioning near the connector, keep clock and control traces short, and provide stable 5 V decoupling close to the device. Verify the programmed output polarity and inactive states for every power-up and fault condition before connecting it to external equipment.
Рекомендуется
Legacy Test Equipment Control
The ATF22V10CZ-15PI is suitable for sequencing and routing logic in legacy test and measurement equipment built around a 24-pin Through-hole PLD position. Its electrically erasable Flash configuration stores the logic map without a mask order and allows controlled updates during fixture development or maintenance. The 15 ns propagation delay supports ordinary instrument-control paths rather than high-speed signal processing, and the industrial grade favors long-life industrial equipment. Engineers should preserve the original socket orientation and lead spacing, check input levels against the existing board, and compare timing behavior with the original device. Programming must be completed and verified before the instrument is returned to service.
Рекомендуется
Appliance and Control Logic
The ATF22V10CZ-15PI can implement operating-state logic, mode selection, inhibit functions, and discrete actuator sequencing in appliance or equipment-control boards. Its compact 10-macrocell architecture replaces scattered gates while retaining a conventional through-hole package for serviceability. A 15 ns device provides margin for ordinary control signals, but every path must still be checked against the original schematic because combinational and registered behavior is determined by the programmed equations. Use a common 5 V source with local bypass capacitance, keep sensitive signal routing away from the program and control paths, and validate every fail-safe output state. The industrial temperature suffix should be checked against the appliance's internal temperature range.
Рекомендуется
Data Routing and Signal Conditioning
The ATF22V10CZ-15PI can implement compact routing, pulse qualification, command formatting, and data-path control around slower external devices. Its 10 macrocells and 500-gate capacity suit fixed Boolean functions rather than general-purpose processing, and the 15 ns propagation delay should be included in path timing budgets. For industrial instrumentation, locate the PLD near the interface circuitry to minimize trace length and susceptibility to noise. Define every input's valid state, account for unused pins according to the datasheet, and avoid relying on floating control nodes. After programming, exercise boundary conditions and fault sequences to ensure the programmed equations preserve safe outputs during reset and power transitions.
Рекомендуется
Educational and Prototype Logic
The ATF22V10CZ-15PI supports educational and prototype work involving state machines, combinational logic, and Flash-programmed PLD design because it retains its configuration without power and uses an accessible 24-PDIP package. Students can examine how ten macrocells implement Boolean equations and how programmed outputs interact with LEDs, switches, counters, or memory devices. The 15 ns specification provides a clear timing target for laboratory exercises, while the industrial grade leaves room for controlled workshop environments. Include pull resistors where the board design requires defined logic levels, never leave required control inputs floating, and retain a backup of the programmed configuration. After every logic change, verify the fuse map and test all state transitions on the breadboard or prototype PCB.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATF22V10CZ-15PI — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATF22V10CZ-15PC | ATF22V10CZ-15PJ | ATF22V10CZ-12PC | ATF22V10CZ-10PC | ATF22V10CZ-20PC |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-PDIP | 24-PDIP | 24-PDIP | 24-PDIP | 24-PDIP | 24-PDIP |
| Device Type | Electrically Erasable Programmable Logic Device | Electrically Erasable Programmable Logic Device | Electrically Erasable Programmable Logic Device | Electrically Erasable Programmable Logic Device | Electrically Erasable Programmable Logic Device | Electrically Erasable Programmable Logic Device |
| Logic Capacity | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates |
| Macrocell Count | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Propagation Delay | 15 ns | 15 ns | 15 ns | 12 ns | 10 ns | 20 ns |
| Operating Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Configuration Memory | Electrically Erasable Flash memory | Electrically Erasable Flash memory | Electrically Erasable Flash memory | Electrically Erasable Flash memory | Electrically Erasable Flash memory | Electrically Erasable Flash memory |
| Mounting Style | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
Ключевые отличия
- Industrial-temperature identification (против ATF22V10CZ-15PC)
- Balanced speed and environmental qualification (против ATF22V10CZ-15PJ)
- Timing option with identical package and architecture (против ATF22V10CZ-12PC)
Заметки по проектированию
Do not treat the 15 ns suffix as a complete device identity. The same 24-PDIP footprint contains speed, package, and temperature-grade variations, and some alternatives change the propagation delay from 15 ns to 10, 12, or 20 ns. Confirm the exact MPN, electrical limits, temperature grade, pin functions, and programming algorithm before substitution. In particular, a mechanically compatible part can still fail if its timing behavior or environmental qualification does not satisfy the original equipment.
The ATF22V10CZ-15PI operates from 5 V, so the power rail must meet the datasheet's voltage limits and sequencing requirements. Place the required bypass capacitor close to the device's supply and ground pins, with a short and low-inductance return path. Check absolute maximum conditions, input levels, and output-drive assumptions against the original board rather than assuming generic 5 V TTL compatibility. Program the PLD only after the supply has stabilized.
The 24-PDIP package uses 0.300-inch, or 7.62 mm, row spacing. Verify the PCB drill diameter, row spacing, socket or solder-hole pattern, and keep-out clearance against the manufacturer package drawing. Orient pin 1 consistently and avoid excessive heat during through-hole rework. On legacy boards, inspect socket contacts and connector plating because a mechanically sound replacement cannot compensate for an unreliable socket or damaged pad.
Use the manufacturer's pin-description table when assigning inputs and outputs, and do not leave control inputs floating if they influence a programmed output. Keep clock, enable, and other fast control traces short, route them away from noisy switching nodes, and use a solid ground plane. Validate propagation-delay assumptions in the actual assembled design. The 15 ns timing grade describes the PLD path, but interconnect delay and external component tolerances still affect end-to-end behavior.
Информация о соответствии
The device is an industrial-temperature programmable logic IC rather than an automotive-qualified AEC-Q100 product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not identified and remain unknown.