Microchip Technology

ATF22V10CZ-15PI - 15ns 500-Gate EEPLD | Microchip

부품 번호: ATF22V10CZ-15PI ✓ 활성
5 V Vdss 24-PDIP Package 83.3 MHz Speed Electrically Erasable Flash memory Memory
MOQ: 1 |

ATF22V10CZ-15PI 개요

The Microchip Technology ATF22V10CZ-15PI is a high-performance, electrically erasable CMOS programmable logic device with 10 macrocells, a 500-gate logic capacity, a 15 ns propagation delay, and a 5 V operating supply. The device is packaged in a 24-pin dual in-line through-hole package with 0.300-inch lead spacing and is supplied in a tube for industrial-temperature designs.

An electrically erasable programmable logic device, or EEPLD, belongs to the programmable-logic hierarchy that includes PLD, SPLD, CPLD, and FPGA technologies. Unlike a fixed gate array, an EEPLD stores a logic configuration in nonvolatile Flash memory. This allows the same physical device to implement different Boolean, control, decoding, or glue-logic functions, while retaining its configuration when power is removed.

The ATF22V10CZ-15PI belongs to the ATF22V10C family and provides 10 macrocells with a stated 500-gate capacity. Its 15 ns speed designation makes it appropriate for control logic requiring faster response than the base ATF22V10C speed grade. Electrically erasable Flash-memory technology supports configuration changes without a dedicated programmer socket and avoids the ultraviolet-erase requirement associated with older erasable PLDs.

The device operates from 5 V and is identified as an industrial-temperature-grade component. Its 24-PDIP through-hole construction supports conventional perforated-board assembly, educational prototyping, legacy control systems, and repair or modernization work where a surface-mount package would be impractical. The product-page information identifies the device as an EEPLD with a high-speed 500-gate implementation and 10 macrocells.

Typical uses include address decoding, peripheral interfacing, state-machine control, data-routing logic, and compact combinational or sequential logic for industrial and instrumentation equipment. It is particularly useful when a board already has an ATF22V10-compatible footprint and where nonvolatile reconfiguration is valuable during commissioning, maintenance, or product-variant management.

Designers should preserve the ATF22V10C supply-voltage and timing constraints, use the manufacturer's recommended programming algorithm, and verify every connected pin against the 24-PDIP pin-description table. Because the package is through-hole, pay attention to lead spacing and drilling dimensions before substituting it on an existing assembly.

This page combines the exact device identity, package information, speed and macrocell characteristics with engineering guidance for programming, PCB compatibility, and selection among pin-compatible ATF22V10C options. It also provides practical sourcing and replacement guidance for engineers maintaining legacy programmable-logic designs.

드롭인 대체품: ATF22V10CZ-15PI — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

ATF22V10CZ-15PC

✅ 드롭인
📦 24-PDIP
Propagation delay remains 15 ns; the part uses commercial rather than industrial temperature grading.

📋 참조 대체품 (카탈로그에 없음)

ATF22V10CZ-15PJ

✅ 드롭인
📦 24-PDIP
Propagation delay remains 15 ns; the PJ temperature suffix differs from the target's PI industrial suffix.

📋 참조 대체품 (카탈로그에 없음)

ATF22V10CZ-12PC

✅ 드롭인 ⚠️ 사양 미검증
📦 24-PDIP
Propagation delay is 12 ns versus 15 ns, a 20% reduction; architecture, supply, macrocell count, and footprint remain the same.

📋 참조 대체품 (카탈로그에 없음)

ATF22V10CZ-10PC

✅ 드롭인 ⚠️ 사양 미검증
📦 24-PDIP
Propagation delay is 10 ns versus 15 ns, a 33% reduction; architecture, supply, macrocell count, and footprint remain the same.

📋 참조 대체품 (카탈로그에 없음)

ATF22V10CZ-20PC

✅ 드롭인 ⚠️ 사양 미검증
📦 24-PDIP
Propagation delay is 20 ns versus 15 ns, a 33% increase; architecture, supply, macrocell count, and footprint remain the same.

📋 참조 대체품 (카탈로그에 없음)

ATF22V10CZ-15PI 최대 정격 & 전기적 특성

Device Type Electrically Erasable Programmable Logic Device (EEPLD)
Programmable Logic Architecture Simple Programmable Logic Device (SPLD)
Configuration Memory Technology Electrically Erasable Flash memory
Logic Capacity 500 gates
Macrocell Count 10 macrocells
Propagation Delay 15 ns
동작 공급 전압 5 V
Maximum Operating Frequency 83.3 MHz
Package Type 24-PDIP
Package Form Rectangular dual in-line through-hole package
Number of Terminals 24 terminals
Lead Spacing 0.300 in (7.62 mm)
Temperature Grade Industrial
Packaging Tube
Product Series ATF22V10C
실장 유형 Through-hole

ATF22V10CZ-15PI rectangular dual in-line through-hole package 핀 구성 가이드

ATF22V10CZ-15PI(rectangular dual in-line through-hole package 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

ATF22V10CZ-15PI의 rectangular dual in-line through-hole package 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ATF22V10CZ-15PI.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ATF22V10CZ-15PI 적합 용도: 6 애플리케이션s: Industrial Address Decoding, Peripheral Interface Control, Legacy Test Equipment Control, Appliance and Control Logic, Data Routing and Signal Conditioning, Educational and Prototype Logic.

🏭

Industrial Address Decoding

The ATF22V10CZ-15PI fits industrial address-decoding and memory-select logic because its 10 macrocells can implement multiple Boolean decoding equations in one 24-PDIP device. Its 15 ns propagation delay provides defined response time for ordinary control paths, while the 5 V supply matches established TTL-compatible industrial boards. A designer can place it beside memory, I/O expanders, and latch logic to consolidate repetitive select functions. The 500-gate capacity should be checked against the complete equations and product-term allocation. Program the Flash configuration using the ATF22V10C procedure, verify every decode equation, and include power-up and held-output states in system validation.

🔧

Peripheral Interface Control

The ATF22V10CZ-15PI can consolidate control sequencing for slow industrial peripherals, relay drivers, counters, and discrete I/O interfaces. Ten macrocells are suitable for compact state machines and conditional output logic where replacing many individual gate packages improves maintainability. The 15 ns speed is well matched to mechanical or low-bandwidth peripheral timing, while the industrial temperature designation supports controlled industrial environments. Place input conditioning near the connector, keep clock and control traces short, and provide stable 5 V decoupling close to the device. Verify the programmed output polarity and inactive states for every power-up and fault condition before connecting it to external equipment.

🖥️

Legacy Test Equipment Control

The ATF22V10CZ-15PI is suitable for sequencing and routing logic in legacy test and measurement equipment built around a 24-pin Through-hole PLD position. Its electrically erasable Flash configuration stores the logic map without a mask order and allows controlled updates during fixture development or maintenance. The 15 ns propagation delay supports ordinary instrument-control paths rather than high-speed signal processing, and the industrial grade favors long-life industrial equipment. Engineers should preserve the original socket orientation and lead spacing, check input levels against the existing board, and compare timing behavior with the original device. Programming must be completed and verified before the instrument is returned to service.

⚡

Appliance and Control Logic

The ATF22V10CZ-15PI can implement operating-state logic, mode selection, inhibit functions, and discrete actuator sequencing in appliance or equipment-control boards. Its compact 10-macrocell architecture replaces scattered gates while retaining a conventional through-hole package for serviceability. A 15 ns device provides margin for ordinary control signals, but every path must still be checked against the original schematic because combinational and registered behavior is determined by the programmed equations. Use a common 5 V source with local bypass capacitance, keep sensitive signal routing away from the program and control paths, and validate every fail-safe output state. The industrial temperature suffix should be checked against the appliance's internal temperature range.

📡

Data Routing and Signal Conditioning

The ATF22V10CZ-15PI can implement compact routing, pulse qualification, command formatting, and data-path control around slower external devices. Its 10 macrocells and 500-gate capacity suit fixed Boolean functions rather than general-purpose processing, and the 15 ns propagation delay should be included in path timing budgets. For industrial instrumentation, locate the PLD near the interface circuitry to minimize trace length and susceptibility to noise. Define every input's valid state, account for unused pins according to the datasheet, and avoid relying on floating control nodes. After programming, exercise boundary conditions and fault sequences to ensure the programmed equations preserve safe outputs during reset and power transitions.

🧩

Educational and Prototype Logic

The ATF22V10CZ-15PI supports educational and prototype work involving state machines, combinational logic, and Flash-programmed PLD design because it retains its configuration without power and uses an accessible 24-PDIP package. Students can examine how ten macrocells implement Boolean equations and how programmed outputs interact with LEDs, switches, counters, or memory devices. The 15 ns specification provides a clear timing target for laboratory exercises, while the industrial grade leaves room for controlled workshop environments. Include pull resistors where the board design requires defined logic levels, never leave required control inputs floating, and retain a backup of the programmed configuration. After every logic change, verify the fuse map and test all state transitions on the breadboard or prototype PCB.

What is ATF22V10CZ-15PI?
The ATF22V10CZ-15PI is a Microchip Technology electrically erasable programmable logic device with 10 macrocells, a 500-gate logic capacity, and a 15 ns propagation delay. According to the manufacturer product page, it is a 5 V, industrial-temperature component in a 24-pin PDIP package. Its nonvolatile Flash configuration supports compact control, decoding, routing, and interface logic without a mask change.
What package does ATF22V10CZ-15PI use?
The ATF22V10CZ-15PI uses a 24-pin dual in-line through-hole package with 0.300-inch, or 7.62 mm, lead spacing. According to the manufacturer product page, the exact suffix identifies industrial-temperature construction and the device is supplied in a tube. Confirm the package drawing and PCB drill pattern before fitting it to an existing board.
How many macrocells and gates does ATF22V10CZ-15PI provide?
The ATF22V10CZ-15PI provides 10 macrocells and a stated 500-gate capacity. According to Microchip's ATF22V10C documentation, the ATF22V10C is an electrically erasable CMOS PLD using Flash memory. These figures identify the device as a compact SPLD intended for Boolean equations, state machines, peripheral control, and board-level glue logic.
What is the propagation delay of ATF22V10CZ-15PI?
The ATF22V10CZ-15PI has a 15 ns propagation-delay designation. According to the Microchip ATF22V10C datasheet, the family supports speed options down to 5 ns, while the 15 ns suffix identifies this particular speed grade. Use the datasheet timing definitions and test conditions when calculating setup, hold, and clock-path requirements.
Where can I download the ATF22V10CZ-15PI datasheet PDF?
The ATF22V10CZ-15PI datasheet can be downloaded from the linked PDF, and the ATF22V10C family documentation is also available from Microchip's product page. The manufacturer datasheet contains the authoritative pin descriptions, electrical characteristics, timing information, and programming procedure. Use that documentation when validating a replacement rather than relying only on a distributor summary.
Where is the ATF22V10CZ-15PI pinout?
The ATF22V10CZ-15PI pinout is documented in the pin-description table of the ATF22V10C manufacturer datasheet. The device has 24 physical pins in a standard PDIP arrangement. Use the package drawing and pin table to confirm power, ground, clock, input, and output assignments before connecting signals or programming the device.
What can replace ATF22V10CZ-15PI?
The closest drop-in choices are ATF22V10CZ-15PC and ATF22V10CZ-15PJ because they retain the ATF22V10C architecture, 5 V supply, 10-macrocell organization, 15 ns speed designation, and 24-PDIP footprint. Their temperature-grade suffixes differ from the target's industrial designation. Confirm the operating-temperature requirement and program the replacement with the appropriate device algorithm before production use.
Is ATF22V10CZ-15PC a drop-in replacement for ATF22V10CZ-15PI?
The ATF22V10CZ-15PC is a pin-compatible ATF22V10C-family option with the same 15 ns speed designation, 5 V supply, 10 macrocells, and 24-PDIP format. According to cross-reference information, its terminals and package are consistent with the target. The principal difference is the temperature suffix: the 15PC is identified as a commercial-temperature grade rather than the target's industrial grade.
ATF22V10CZ-15PI vs ATF22V10CZ-15PJ: which should be selected?
Choose the ATF22V10CZ-15PI when the assembly requires the identified industrial-temperature grade, and consider ATF22V10CZ-15PJ when its temperature range satisfies the system requirement. Both parts use the ATF22V10C family, 5 V supply, 10 macrocells, 15 ns speed designation, and 24-PDIP format. The important comparison is environmental qualification, not PCB compatibility.
When should I choose ATF22V10CZ-15PI over a faster ATF22V10C option?
Choose the ATF22V10CZ-15PI when 15 ns timing satisfies the design and the industrial-temperature grade is valuable. A faster ATF22V10C speed grade can provide additional timing margin but does not change the underlying 10-macrocell, 500-gate SPLD architecture. Select the alternative only after checking propagation delay, setup and hold limits, power dissipation, temperature requirements, and programming compatibility.
Is ATF22V10CZ-15PI suitable for legacy industrial control boards?
The ATF22V10CZ-15PI is suitable for legacy industrial control and instrumentation boards that use a 5 V ATF22V10C, 24-PDIP footprint. Its industrial-temperature designation and electrically erasable Flash configuration support nonvolatile logic retention. A practical replacement should still be checked for timing, setup, hold, power-up behavior, and any board-specific glue-logic differences.
What is the power supply voltage for ATF22V10CZ-15PI?
The ATF22V10CZ-15PI operates from a 5 V supply. According to Microchip's ATF22V10C documentation, the device is a high-performance electrically erasable CMOS PLD. Designers should observe the datasheet's input-voltage and power-up limits, provide appropriate decoupling, and avoid substituting supply assumptions from unrelated 3.3 V or older TTL PLD families.
How is ATF22V10CZ-15PI programmed?
The ATF22V10CZ-15PI is programmed through the programming procedure defined for the ATF22V10C family in the Microchip manufacturer documentation. Its electrically erasable Flash architecture allows configuration to be written without ultraviolet erasure. Use the supported programmer, adapter, and device-specific algorithm, and confirm the programmed fuse map against the application's logic equations.
Where can I buy ATF22V10CZ-15PI and check its lead time?
Use the Request a Quote form on this page to request ATF22V10CZ-15PI availability, current lead time, and an order quotation. The device is identified as a 24-PDIP industrial-temperature EEPLD, and its tube packaging should be confirmed with the order. Submit the required quantity and target date so the request can be matched to the appropriate supply channel.
What are the key specifications of ATF22V10CZ-15PI that engineers should know?
The ATF22V10CZ-15PI combines a 5 V supply, 10 macrocells, 500-gate capacity, 15 ns propagation delay, and 24-PDIP through-hole package. According to the Microchip ATF22V10C product documentation, it is an electrically erasable CMOS Flash PLD with an industrial temperature designation. These characteristics place it between simple masked logic and larger CPLD or FPGA implementations for compact control and interface functions.
What is the best cross-brand equivalent for ATF22V10CZ-15PI?
No verified cross-brand, pin-to-pin equivalent for the ATF22V10CZ-15PI appears in the available component cross-reference information. A replacement must match the 24-PDIP footprint, 5 V supply, ATF22V10C pin functions, 10-macrocell organization, timing behavior, and programming method. Use an ATF22V10CZ pin-compatible part when that cross-brand requirement cannot be demonstrated.

엔지니어링 참조 데이터: ATF22V10CZ-15PI — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ATF22V10CZ-15PI when maintaining an industrial-temperature, 5 V, 24-PDIP ATF22V10C design whose timing requirements are met by a 15 ns propagation delay. ATF22V10CZ-15PC is mechanically and functionally close, but its commercial temperature grade makes it more appropriate only where environmental requirements permit that grading. ATF22V10CZ-15PJ may fit the same PCB, but its temperature qualification should be confirmed. ATF22V10CZ-12PC and ATF22V10CZ-10PC offer lower propagation delays for designs needing more timing margin, while ATF22V10CZ-20PC provides a slower 20 ns grade. In every case, verify the 10-macrocell product-term allocation, pin functions, power-up behavior, programming algorithm, and original timing budget. No verified cross-brand drop-in equivalent was identified, so a platform change to another PLD architecture would require more than a component substitution.

대체품과의 비교

파라미터 이 제품 ATF22V10CZ-15PC ATF22V10CZ-15PJ ATF22V10CZ-12PC ATF22V10CZ-10PC ATF22V10CZ-20PC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 24-PDIP 24-PDIP 24-PDIP 24-PDIP 24-PDIP 24-PDIP
Device Type Electrically Erasable Programmable Logic Device Electrically Erasable Programmable Logic Device Electrically Erasable Programmable Logic Device Electrically Erasable Programmable Logic Device Electrically Erasable Programmable Logic Device Electrically Erasable Programmable Logic Device
Logic Capacity 500 gates 500 gates 500 gates 500 gates 500 gates 500 gates
Macrocell Count 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
Propagation Delay 15 ns 15 ns 15 ns 12 ns 10 ns 20 ns
Operating Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Configuration Memory Electrically Erasable Flash memory Electrically Erasable Flash memory Electrically Erasable Flash memory Electrically Erasable Flash memory Electrically Erasable Flash memory Electrically Erasable Flash memory
Mounting Style Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

주요 차별점

  • Industrial-temperature identification (vs ATF22V10CZ-15PC)
  • Balanced speed and environmental qualification (vs ATF22V10CZ-15PJ)
  • Timing option with identical package and architecture (vs ATF22V10CZ-12PC)

설계 노트

Do not treat the 15 ns suffix as a complete device identity. The same 24-PDIP footprint contains speed, package, and temperature-grade variations, and some alternatives change the propagation delay from 15 ns to 10, 12, or 20 ns. Confirm the exact MPN, electrical limits, temperature grade, pin functions, and programming algorithm before substitution. In particular, a mechanically compatible part can still fail if its timing behavior or environmental qualification does not satisfy the original equipment.

The ATF22V10CZ-15PI operates from 5 V, so the power rail must meet the datasheet's voltage limits and sequencing requirements. Place the required bypass capacitor close to the device's supply and ground pins, with a short and low-inductance return path. Check absolute maximum conditions, input levels, and output-drive assumptions against the original board rather than assuming generic 5 V TTL compatibility. Program the PLD only after the supply has stabilized.

The 24-PDIP package uses 0.300-inch, or 7.62 mm, row spacing. Verify the PCB drill diameter, row spacing, socket or solder-hole pattern, and keep-out clearance against the manufacturer package drawing. Orient pin 1 consistently and avoid excessive heat during through-hole rework. On legacy boards, inspect socket contacts and connector plating because a mechanically sound replacement cannot compensate for an unreliable socket or damaged pad.

Use the manufacturer's pin-description table when assigning inputs and outputs, and do not leave control inputs floating if they influence a programmed output. Keep clock, enable, and other fast control traces short, route them away from noisy switching nodes, and use a solid ground plane. Validate propagation-delay assumptions in the actual assembled design. The 15 ns timing grade describes the PLD path, but interconnect delay and external component tolerances still affect end-to-end behavior.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The device is an industrial-temperature programmable logic IC rather than an automotive-qualified AEC-Q100 product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not identified and remain unknown.

데이터 검증일: 2026-11-17 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ATF22V10CZ-15PI datasheet ATF22V10CZ-15PI pinout ATF22V10CZ-15PI datasheet pdf ATF22V10CZ-15PI equivalent ATF22V10CZ-15PI replacement ATF22V10CZ-15PI cross reference ATF22V10CZ-15PI vs ATF22V10CZ-15PC ATF22V10CZ-15PI 24-PDIP footprint ATF22V10CZ-15PI programming Microchip ATF22V10CZ-15PI ATF22V10CZ-15PI price ATF22V10CZ-15PI stock ATF22V10CZ-15PI application circuit ATF22V10CZ 500 gate EEPLD ATF22V10CZ-15PI industrial temperature

관련 부품 & 용어

Microchip Technology ATF22V10CZ-15PI ATF22V10C ATF22V10CZ-15PC ATF22V10CZ-15PJ ATF22V10CZ-12PC ATF22V10CZ-10PC ATF22V10CZ-20PC EEPLD SPLD programmable logic device electrically erasable Flash memory CMOS 10 macrocells 500 gates 15 ns propagation delay 5 V power supply 24-PDIP through-hole package surface-mount package family industrial temperature grade address decoding state-machine control peripheral interfacing
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기