Microchip Technology

ATSAMD21E18A-AF 48MHz 256KB Flash MCU | Microchip Technology

Артикул: ATSAMD21E18A-AF ✓ Активен
1.6 V to 3.6 V Vdss 32-pin TQFP, 7 mm x 7 mm Package 48 MHz Speed 256 KB Flash Memory
MOQ: 1 |

ATSAMD21E18A-AF Обзор

The Microchip Technology ATSAMD21E18A-AF is a 32-bit ARM Cortex-M0+ SAM D21E microcontroller with a 48 MHz maximum operating frequency, 256 KB of embedded Flash memory, and 32 KB of SRAM in a 32-pin TQFP package. The device combines a low-power processor core with integrated serial peripherals and mixed-signal resources for compact embedded control designs.

A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and interface circuitry onto one package. In the product hierarchy, the ATSAMD21E18A-AF is an ARM Cortex-M0+ MCU within Microchip's SAM D21 family. This low-power architecture is intended for embedded systems that require deterministic peripheral control without the power and memory requirements of a higher-complexity processor.

Key features include a 48 MHz ARM Cortex-M0+ core, 256 KB of Flash for firmware, 32 KB of SRAM for working data, a 1.6 V to 3.6 V operating-voltage range, and 10-bit and 12-bit conversion resources. The ATSAMD21E18A-AF is identified as a functional-safety-oriented SAM D21E variant and is offered in a green 32-pin TQFP package rated for operation to 125 °C.

The SAM D21 family supports a common peripheral architecture, a linear address map, and code-compatible migration among family members. This makes the ATSAMD21E18A-AF suitable for designs that may later move between SAM D21 variants while retaining firmware structure. The 48 MHz operating limit also provides useful margin for event-driven control loops, communication handling, and periodic sensor acquisition.

Typical applications include home automation, consumer products, metering equipment, and industrial embedded systems. It can serve as the central controller for a connected sensor node, a compact data-acquisition module, a building-control endpoint, or a low-power device that updates a local display and communicates measurement results through serial interfaces.

PCB design should preserve clean supply distribution and route high-speed or sensitive signals away from switching nodes. Place decoupling capacitors close to the supply pins, follow the package pin definition in the manufacturer datasheet when assigning I/O functions, and confirm the external clock, reset, and programming connections against the selected board layout.

This page combines the manufacturer specifications with focused design guidance, package information, drop-in ordering alternatives, and practical application guidance for engineers evaluating the ATSAMD21E18A-AF.

Аналоги без доработки для ATSAMD21E18A-AF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ATSAMD21E18A-AF (тот же форм-фактор и посадочное место) — отличается по Package, RoHS Status, Mounting Type, SRAM, Architecture.

Microchip Technology
Package: 32-pin TQFP (7x7 mm)
RoHS Status: Compliant (GREEN)
SRAM: 16 KB
Сравнить с ATSAMD21E18A-AF →
Microchip Technology
Package: 32-TQFP (7x7 mm)
RoHS Status: Compliant
Mounting Type: Surface Mount (Tape & Reel)
Сравнить с ATSAMD21E18A-AF →
Microchip Technology
Package: 32-pin TQFP, 7 x 7 mm
Architecture: Harvard
Сравнить с ATSAMD21E18A-AF →

ATSAMD21E18A-AUT

✅ Прямая замена
📦 32-pin TQFP (7 mm x 7 mm)
Same 48 MHz core, 256 KB Flash, and 32 KB SRAM ratings; 0% electrical difference in the identified primary parameters, with tape-and-reel delivery instead of tray presentation.

📋 Справочный аналог (нет в каталоге)

ATSAMD21E18A-AFT

✅ Прямая замена
Microchip Technology
📦 32-pin TQFP (7 mm x 7 mm)
ARM Cortex-M0+ (32-bit) · SAM D21E (Functional Safety / FuSa) · 48 MHz · 2.46 CoreMark/MHz · 256 KB (256K x 8) · 32 KB · 1.62 V to 3.63 V · -40 C to +125 C

Уточнить цену

Открыть даташит →

ATSAMD21E18A-AU

✅ Прямая замена
Microchip Technology
📦 32-pin TQFP (7 mm x 7 mm)
32-bit ARM Cortex-M0+ Flash microcontroller · Arm Cortex-M0+ · 48 MHz · 256 KB · 32 KB · 1.6 V to 3.6 V · 32-pin TQFP, 7 x 7 mm · Approximately 26

Уточнить цену

Открыть даташит →

ATSAMD21E18A-AF Максимальные параметры и электрические характеристики

CPU Core ARM Cortex-M0+
Architecture 32-bit RISC
Maximum CPU Frequency 48 MHz
Program Memory 256 KB Flash
Flash Organization 256 KB (256K x 8)
SRAM 32 KB
Operating Voltage Range 1.6 V to 3.6 V
ADC Resolution 10-bit and 12-bit
Maximum Operating Temperature 125 °C
Корпус 32-pin TQFP, 7 mm x 7 mm
Тип монтажа Surface Mount
Functional Safety Functional Safety (FuSa) Microcontroller
Product Series SAM D21E
Code Compatibility Hex-compatible across compatible SAM D21 family members
Linear Address Map Supported across SAM D21 family members
Green Packaging Green
Статус RoHS Unknown
REACH Status Unknown
AEC-Q100 Qualification Not applicable

Руководство по цоколевке ATSAMD21E18A-AF в корпусе 32-pin tqfp, 7 mm x 7 mm

Цоколевка для ATSAMD21E18A-AF (корпус 32-pin tqfp, 7 mm x 7 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 32-pin tqfp, 7 mm x 7 mm для ATSAMD21E18A-AF

Нет подробных данных о распиновке для ATSAMD21E18A-AF.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ATSAMD21E18A-AF подходит для 6 применениеs: Industrial Sensor and Control Node, Smart Metering and Energy Monitor, Home Automation Controller, Consumer Appliance Interface, Data Acquisition and Condition Monitoring, Connected Low-Power Peripheral.

🏭

Industrial Sensor and Control Node

The ATSAMD21E18A-AF fits compact industrial sensor nodes because its 48 MHz ARM Cortex-M0+ core can service multiple timers, serial interfaces, and periodic conversions while operating from a 1.6 V to 3.6 V supply. Its 256 KB of Flash provides room for application firmware, calibration tables, and a bootloader, while 32 KB of SRAM supports acquisition buffers and communication state. The 125 °C-rated 32-pin TQFP package is appropriate for equipment near heat sources when the full operating range is required. Place local bypass capacitance at the supply pins, use the datasheet's alternate-function assignments for sensor inputs, and isolate analog traces from digital switching paths.

🔧

Smart Metering and Energy Monitor

The ATSAMD21E18A-AF is suitable for metering equipment that must acquire measurements, maintain calibrated configuration data, and report results through a serial link. The 10-bit and 12-bit conversion resources support appropriate measurement channels, while the 48 MHz processor leaves performance margin for filtering, calculations, and event handling. Its 256 KB Flash can retain firmware, configuration parameters, and identification data, and its 32 KB SRAM can buffer sampled values before transmission. The 1.6 V to 3.6 V operating range supports low-energy designs. Use separate analog and digital grounding strategies and follow the manufacturer pin table for ADC channels and reference connections.

🧩

Home Automation Controller

The ATSAMD21E18A-AF can serve as the local controller in a home-automation node that coordinates switches, sensors, indicators, and communications. Its Cortex-M0+ architecture operates up to 48 MHz, providing responsive handling of timer events and serial protocols without a high-power application processor. The 256 KB Flash supports a complete firmware image and protocol handlers, while 32 KB of SRAM is useful for device state and message queues. The low 1.6 V to 3.6 V supply range permits integration with low-voltage sensor and communication circuitry. Keep sensitive radio or sensor routing away from switching nodes, and use the documented peripheral multiplexing when allocating board pins.

📱

Consumer Appliance Interface

The ATSAMD21E18A-AF is appropriate for compact consumer appliances that combine local controls, status indication, and data logging. The 48 MHz Cortex-M0+ processor can execute control logic and communication tasks, and 256 KB of Flash accommodates firmware plus configuration data. Its 32 KB of SRAM supports short message buffers and control state without requiring external memory in typical embedded designs. Operating from 1.6 V to 3.6 V helps simplify power architecture around sensors and serial peripherals, while the 32-pin TQFP package supports compact surface-mount assembly. Confirm reset and programming access, provide adequate supply decoupling, and route exposed switching-node copper away from communication and measurement inputs.

📊

Data Acquisition and Condition Monitoring

The ATSAMD21E18A-AF supports compact data-acquisition modules that digitize analog inputs and transfer measurements to a host or local recorder. Its 10-bit and 12-bit conversion resources, 48 MHz processing capability, and 32 KB of working memory allow simultaneous acquisition, filtering, and communication handling. The 256 KB Flash stores firmware, configuration, and calibration tables, helping avoid external nonvolatile memory in moderate-size systems. The 1.6 V to 3.6 V range supports compact power systems, and the 125 °C rating is useful in monitored industrial environments. Use the manufacturer ADC guidance for reference routing, sampling timing, and analog grounding, and avoid placing digital return currents beneath sensitive conversion inputs.

🌐

Connected Low-Power Peripheral

The ATSAMD21E18A-AF works well as the supervisory microcontroller in a connected low-power peripheral that wakes to acquire data, processes it, and communicates through serial peripherals. The 32-bit Cortex-M0+ core runs up to 48 MHz, allowing efficient event handling while the 1.6 V to 3.6 V supply range supports integration with compact sensors and radio circuitry. Its 256 KB of Flash accommodates a bootloader and application code, and its 32 KB of SRAM supports packet processing and short data buffers. Use low-leakage peripheral states where appropriate, preserve clean power rails for attached radio circuits, and assign wake, interrupt, and debug pins strictly from the manufacturer pin-definition table.

What are the key specifications of ATSAMD21E18A-AF that engineers should know?
The ATSAMD21E18A-AF is a 32-bit ARM Cortex-M0+ MCU rated up to 48 MHz, with 256 KB of Flash, 32 KB of SRAM, and a 1.6 V to 3.6 V supply range. According to the Microchip Technology SAM D21 datasheet 40001882A, the family provides a common peripheral architecture and linear address map, while the device is offered in a 32-pin TQFP package with operation to 125 °C.
Where can I download the ATSAMD21E18A-AF datasheet PDF?
The official ATSAMD21E18A-AF datasheet PDF is available from Microchip Technology through the SAM D21 family document 40001882A. That document covers the 32- to 64-pin SAM D21 family, including the ARM Cortex-M0+ processor, up to 256 KB of Flash, up to 32 KB of SRAM, and the family migration characteristics. Use the manufacturer PDF for authoritative pin definitions and electrical limits.
What is the ATSAMD21E18A-AF pinout and package footprint?
The ATSAMD21E18A-AF uses a 32-pin TQFP package measuring 7 mm by 7 mm. Its multiplexed I/O assignments include serial communication, timer, analog-conversion, interrupt, clock, and debug functions. Use the pin-description table in Microchip Technology datasheet 40001882A when assigning each signal; peripheral mapping can vary with alternate-function settings, so no pin should be assigned from a generic board diagram alone.
Is the ATSAMD21E18A-AF suitable for low-power embedded applications?
The ATSAMD21E18A-AF is suitable for low-power embedded control because it belongs to Microchip's low-power SAM D21 family and operates from 1.6 V to 3.6 V. Its ARM Cortex-M0+ core reaches 48 MHz while retaining 256 KB of Flash and 32 KB of SRAM. The manufacturer identifies home automation, consumer, metering, and industrial systems as target application areas.
What is the difference between ATSAMD21E18A-AF and ATSAMD21E18A-AFT?
The ATSAMD21E18A-AF and ATSAMD21E18A-AFT identify the same 32-pin SAM D21E class of device with a 48 MHz Cortex-M0+ core, 256 KB of Flash, and 32 KB of SRAM. Their primary ordering distinction is the delivery format: the AFT ordering code is associated with tape-and-reel presentation, while the AF ordering code is associated with tray presentation. Confirm the exact suffix and packing method on the purchase order.
Can ATSAMD21E18A-AUT replace ATSAMD21E18A-AF on the same PCB?
The ATSAMD21E18A-AUT is a candidate pin-compatible alternative because it uses the same 32-pin TQFP SAM D21E platform and is listed with the same 48 MHz, 256 KB Flash, and 32 KB SRAM configuration. The ordering suffix also changes the delivery method to tape and reel. Final substitution should be checked against the manufacturer ordering guide for temperature, packing, and marking requirements.
What is the best drop-in replacement for ATSAMD21E18A-AF?
ATSAMD21E18A-AUT is the closest same-footprint alternative identified for the ATSAMD21E18A-AF, sharing the 32-pin TQFP interface and core, Flash, and SRAM configuration. It is a drop-in ordering alternative rather than a functional substitute because the suffix changes packaging. Use ATSAMD21E18A-AFT or ATSAMD21E18A-AF when the required presentation differs, and verify firmware, markings, and temperature requirements before release.
What can replace ATSAMD21E18A-AF without changing the PCB?
ATSAMD21E18A-AUT can replace ATSAMD21E18A-AF without changing the 32-pin TQFP land pattern because both belong to the same SAM D21E family and share the principal 48 MHz, 256 KB Flash, and 32 KB SRAM ratings. No verified cross-brand pin-to-pin MCU replacement is identified for this exact footprint. Confirm the ordering guide and production programming requirements before approving the substitution.
When should I choose ATSAMD21E18A-AF over another SAM D21 variant?
Choose ATSAMD21E18A-AF when a design specifically calls for the 32-pin SAM D21E configuration with 256 KB of Flash, 32 KB of SRAM, a 48 MHz Cortex-M0+ core, and operation to 125 °C. Retain the AF suffix when tray presentation matches the assembly process. Choose AFT or AUT when tape-and-reel delivery is required, provided all other ordering attributes remain acceptable.
Is ATSAMD21E18A-AF suitable for industrial control and metering equipment?
The ATSAMD21E18A-AF is suitable for industrial control and metering equipment that operates from a 1.6 V to 3.6 V supply and benefits from a 125 °C-rated device. Its 256 KB of Flash accommodates firmware and configuration data, while 32 KB of SRAM supports active control and communication buffers. The manufacturer specifically identifies metering and industrial applications for the SAM D21E family.
Where can I buy ATSAMD21E18A-AF online and check its availability?
Use the Request a Quote form on this XAIPART page to request ATSAMD21E18A-AF availability, current lead time, and an order quote. The form avoids stale stock assertions and lets the order be matched to the exact AF suffix and 32-pin TQFP packaging. Include the required quantity, tray quantity, and target delivery date when submitting the request.
What is the price of ATSAMD21E18A-AF?
The current commercial price for ATSAMD21E18A-AF should be requested through the Request a Quote form on this page. The quote can account for exact MPN, order quantity, tray packaging, and current market conditions. Do not use a historical listing amount for budgeting a new production run because component pricing and availability can change.
What is the lead time for ATSAMD21E18A-AF?
The current lead time for ATSAMD21E18A-AF should be confirmed through the Request a Quote form on this page. Provide the required annual and per-order quantities plus the proposed assembly schedule so the exact AF ordering code and tray packaging can be checked. This is especially important when a design cannot accept a substitution in the package suffix.
Is ATSAMD21E18A-AF in stock?
Current ATSAMD21E18A-AF stock status should be confirmed through the Request a Quote form on this page rather than inferred from a listing snapshot. Provide the quantity required for prototype, production, and replenishment, along with any date-critical milestones. The quote response can confirm allocation for the exact ATSAMD21E18A-AF suffix and 32-pin TQFP presentation.
What is the best Microchip equivalent for ATSAMD21E18A-AF?
The closest identified Microchip ordering equivalent is ATSAMD21E18A-AUT, which retains the 32-pin TQFP SAM D21E architecture, 48 MHz Cortex-M0+ core, 256 KB Flash, and 32 KB SRAM. Its delivery suffix differs, so it should be treated as a packing-related drop-in candidate rather than a blanket replacement. Validate the temperature grade, device marking, and production programming procedure before substitution.

Справочные инженерные данные для ATSAMD21E18A-AF — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose ATSAMD21E18A-AF when the design requires the exact 32-pin SAM D21E MCU configuration with an ARM Cortex-M0+ core, 256 KB of Flash, 32 KB of SRAM, a 1.6 V to 3.6 V supply range, and operation to 125 °C. It is especially appropriate for industrial, metering, automation, and connected peripheral products that need functional-safety-oriented positioning. Choose ATSAMD21E18A-AUT or ATSAMD21E18A-AFT when their manufacturing delivery suffix matches the assembly process and the principal electrical ratings remain acceptable. ATSAMD21E18A-AU is another same-family ordering candidate. Because the identified alternatives closely match the core, memory, package, and voltage specifications, final selection should focus on the exact order code, temperature grade, device marking, programming method, and supply-chain requirements. No cross-brand MCU should be treated as a drop-in replacement without a verified 32-pin TQFP pin-function and electrical comparison.

Сравнение с аналогами

Параметр Этот товар ATSAMD21E18A-AUT ATSAMD21E18A-AFT ATSAMD21E18A-AU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 32-pin TQFP (7 mm x 7 mm) 32-pin TQFP (7 mm x 7 mm) 32-pin TQFP (7 mm x 7 mm) 32-pin TQFP (7 mm x 7 mm)
CPU Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 256 KB 256 KB 256 KB 256 KB
SRAM 32 KB 32 KB 32 KB 32 KB
Operating Voltage Range 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V
ADC Resolution 10-bit and 12-bit 10-bit and 12-bit 10-bit and 12-bit 10-bit and 12-bit

Ключевые отличия

  • Identical core and memory configuration across the identified drop-in alternatives (против ATSAMD21E18A-AUT)
  • Functional-safety-oriented device positioning (против ATSAMD21E18A-AFT)
  • Broad supply-voltage coverage for embedded systems (против ATSAMD21E18A-AU)

Заметки по проектированию

Place the required bypass capacitors immediately adjacent to the ATSAMD21E18A-AF supply and ground pins, with short, low-loop-area traces. Keep the supply return path continuous beneath the device where the package design allows it. Route clock, programming, and communication signals away from switching-power nodes. Because several SAM D21 peripherals share pins through alternate functions, assign the PCB connections from the package pin table and validate every peripheral combination before layout release.

Use the manufacturer pin-description and multiplexing tables to separate debug, communication, timer, and analog functions. Avoid assigning a signal to a pin that is required for another peripheral unless the design intentionally supports that alternate combination. For externally exposed interfaces, use controlled-impedance routing where required, keep connectors away from sensitive ADC nodes, and provide a defined return path for each external signal. Recheck boot and programming pins because they commonly share package pins with normal functions.

Design the 1.6 V to 3.6 V supply so it remains within the operating range across temperature, load, and startup conditions. Place the local supply capacitance where the datasheet layout guidance indicates, and treat the MCU supply as a clean rail even when the system includes a switching converter. Verify brownout behavior, reset release, and power-consumption modes in the complete firmware. The processor may run at 48 MHz, but peripheral clocks, unused pins, and sleep-state configuration determine much of the final current draw.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The product is listed as green and in a 32-pin TQFP package. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified and therefore remain unknown. AEC-Q100 is not applicable to this general-purpose SAM D21E MCU ordering code.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

atsamd21e18a datasheet atsamd21e18a mut atsamd21e18a mft atsamd21e18a aut atsamd21e18a arduino ATSAMD21E18A datasheet pdf ATSAMD21E18A pinout ATSAMD21E18A 48MHz 256KB flash ATSAMD21E18A TQFP-32 footprint ATSAMD21E18A equivalent ATSAMD21E18A replacement ATSAMD21E18A price ATSAMD21E18A stock Microchip ATSAMD21E18A application circuit

Связанные компоненты & термины

Microchip Technology ATSAMD21E18A-AF ATSAMD21E18A-AUT ATSAMD21E18A-AFT ATSAMD21E18A-AU SAM D21E SAM D21 ARM Cortex-M0+ 32-bit RISC processor microcontroller embedded system Flash memory SRAM ADC TQFP-32 7 mm x 7 mm TQFP surface-mount package functional safety home automation industrial control metering low-power embedded control 1.6 V to 3.6 V 48 MHz
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ