ATSAMD21E18A-AF 48MHz 256KB Flash MCU | Microchip Technology
料号: ATSAMD21E18A-AF ✓ 量产中ATSAMD21E18A-AF 概述
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and interface circuitry onto one package. In the product hierarchy, the ATSAMD21E18A-AF is an ARM Cortex-M0+ MCU within Microchip's SAM D21 family. This low-power architecture is intended for embedded systems that require deterministic peripheral control without the power and memory requirements of a higher-complexity processor.
Key features include a 48 MHz ARM Cortex-M0+ core, 256 KB of Flash for firmware, 32 KB of SRAM for working data, a 1.6 V to 3.6 V operating-voltage range, and 10-bit and 12-bit conversion resources. The ATSAMD21E18A-AF is identified as a functional-safety-oriented SAM D21E variant and is offered in a green 32-pin TQFP package rated for operation to 125 °C.
The SAM D21 family supports a common peripheral architecture, a linear address map, and code-compatible migration among family members. This makes the ATSAMD21E18A-AF suitable for designs that may later move between SAM D21 variants while retaining firmware structure. The 48 MHz operating limit also provides useful margin for event-driven control loops, communication handling, and periodic sensor acquisition.
Typical applications include home automation, consumer products, metering equipment, and industrial embedded systems. It can serve as the central controller for a connected sensor node, a compact data-acquisition module, a building-control endpoint, or a low-power device that updates a local display and communicates measurement results through serial interfaces.
PCB design should preserve clean supply distribution and route high-speed or sensitive signals away from switching nodes. Place decoupling capacitors close to the supply pins, follow the package pin definition in the manufacturer datasheet when assigning I/O functions, and confirm the external clock, reset, and programming connections against the selected board layout.
This page combines the manufacturer specifications with focused design guidance, package information, drop-in ordering alternatives, and practical application guidance for engineers evaluating the ATSAMD21E18A-AF.
直接替换替代料: ATSAMD21E18A-AF ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ATSAMD21E18A-AF (相同外形与封装尺寸) ——差异在于 Package, RoHS Status, Mounting Type, SRAM, Architecture.
ATSAMD21E18A-AUT
✅ 直接替换📋 参考替代料(不在目录中)
ATSAMD21E18A-AFT
✅ 直接替换联系询价
查看数据手册 →ATSAMD21E18A-AU
✅ 直接替换联系询价
查看数据手册 →ATSAMD21E18A-AF 最大额定值与电气特性
| CPU Core | ARM Cortex-M0+ |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 48 MHz |
| Program Memory | 256 KB Flash |
| Flash Organization | 256 KB (256K x 8) |
| SRAM | 32 KB |
| Operating Voltage Range | 1.6 V to 3.6 V |
| ADC Resolution | 10-bit and 12-bit |
| Maximum Operating Temperature | 125 °C |
| 封装 | 32-pin TQFP, 7 mm x 7 mm |
| 安装类型 | Surface Mount |
| Functional Safety | Functional Safety (FuSa) Microcontroller |
| Product Series | SAM D21E |
| Code Compatibility | Hex-compatible across compatible SAM D21 family members |
| Linear Address Map | Supported across SAM D21 family members |
| Green Packaging | Green |
| RoHS 状态 | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not applicable |
ATSAMD21E18A-AF 32-pin tqfp, 7 mm x 7 mm 引脚配置指南
ATSAMD21E18A-AF(32-pin tqfp, 7 mm x 7 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATSAMD21E18A-AF.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATSAMD21E18A-AF 适用于 6 应用s: Industrial Sensor and Control Node, Smart Metering and Energy Monitor, Home Automation Controller, Consumer Appliance Interface, Data Acquisition and Condition Monitoring, Connected Low-Power Peripheral.
Industrial Sensor and Control Node
The ATSAMD21E18A-AF fits compact industrial sensor nodes because its 48 MHz ARM Cortex-M0+ core can service multiple timers, serial interfaces, and periodic conversions while operating from a 1.6 V to 3.6 V supply. Its 256 KB of Flash provides room for application firmware, calibration tables, and a bootloader, while 32 KB of SRAM supports acquisition buffers and communication state. The 125 °C-rated 32-pin TQFP package is appropriate for equipment near heat sources when the full operating range is required. Place local bypass capacitance at the supply pins, use the datasheet's alternate-function assignments for sensor inputs, and isolate analog traces from digital switching paths.
推荐
Smart Metering and Energy Monitor
The ATSAMD21E18A-AF is suitable for metering equipment that must acquire measurements, maintain calibrated configuration data, and report results through a serial link. The 10-bit and 12-bit conversion resources support appropriate measurement channels, while the 48 MHz processor leaves performance margin for filtering, calculations, and event handling. Its 256 KB Flash can retain firmware, configuration parameters, and identification data, and its 32 KB SRAM can buffer sampled values before transmission. The 1.6 V to 3.6 V operating range supports low-energy designs. Use separate analog and digital grounding strategies and follow the manufacturer pin table for ADC channels and reference connections.
推荐
Home Automation Controller
The ATSAMD21E18A-AF can serve as the local controller in a home-automation node that coordinates switches, sensors, indicators, and communications. Its Cortex-M0+ architecture operates up to 48 MHz, providing responsive handling of timer events and serial protocols without a high-power application processor. The 256 KB Flash supports a complete firmware image and protocol handlers, while 32 KB of SRAM is useful for device state and message queues. The low 1.6 V to 3.6 V supply range permits integration with low-voltage sensor and communication circuitry. Keep sensitive radio or sensor routing away from switching nodes, and use the documented peripheral multiplexing when allocating board pins.
推荐
Consumer Appliance Interface
The ATSAMD21E18A-AF is appropriate for compact consumer appliances that combine local controls, status indication, and data logging. The 48 MHz Cortex-M0+ processor can execute control logic and communication tasks, and 256 KB of Flash accommodates firmware plus configuration data. Its 32 KB of SRAM supports short message buffers and control state without requiring external memory in typical embedded designs. Operating from 1.6 V to 3.6 V helps simplify power architecture around sensors and serial peripherals, while the 32-pin TQFP package supports compact surface-mount assembly. Confirm reset and programming access, provide adequate supply decoupling, and route exposed switching-node copper away from communication and measurement inputs.
推荐
Data Acquisition and Condition Monitoring
The ATSAMD21E18A-AF supports compact data-acquisition modules that digitize analog inputs and transfer measurements to a host or local recorder. Its 10-bit and 12-bit conversion resources, 48 MHz processing capability, and 32 KB of working memory allow simultaneous acquisition, filtering, and communication handling. The 256 KB Flash stores firmware, configuration, and calibration tables, helping avoid external nonvolatile memory in moderate-size systems. The 1.6 V to 3.6 V range supports compact power systems, and the 125 °C rating is useful in monitored industrial environments. Use the manufacturer ADC guidance for reference routing, sampling timing, and analog grounding, and avoid placing digital return currents beneath sensitive conversion inputs.
推荐
Connected Low-Power Peripheral
The ATSAMD21E18A-AF works well as the supervisory microcontroller in a connected low-power peripheral that wakes to acquire data, processes it, and communicates through serial peripherals. The 32-bit Cortex-M0+ core runs up to 48 MHz, allowing efficient event handling while the 1.6 V to 3.6 V supply range supports integration with compact sensors and radio circuitry. Its 256 KB of Flash accommodates a bootloader and application code, and its 32 KB of SRAM supports packet processing and short data buffers. Use low-leakage peripheral states where appropriate, preserve clean power rails for attached radio circuits, and assign wake, interrupt, and debug pins strictly from the manufacturer pin-definition table.
推荐
推荐产品汇总
工程参考数据: ATSAMD21E18A-AF ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATSAMD21E18A-AUT | ATSAMD21E18A-AFT | ATSAMD21E18A-AU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) |
| CPU Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB |
| Operating Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| ADC Resolution | 10-bit and 12-bit | 10-bit and 12-bit | 10-bit and 12-bit | 10-bit and 12-bit |
关键差异点
- Identical core and memory configuration across the identified drop-in alternatives (对比 ATSAMD21E18A-AUT)
- Functional-safety-oriented device positioning (对比 ATSAMD21E18A-AFT)
- Broad supply-voltage coverage for embedded systems (对比 ATSAMD21E18A-AU)
设计说明
Place the required bypass capacitors immediately adjacent to the ATSAMD21E18A-AF supply and ground pins, with short, low-loop-area traces. Keep the supply return path continuous beneath the device where the package design allows it. Route clock, programming, and communication signals away from switching-power nodes. Because several SAM D21 peripherals share pins through alternate functions, assign the PCB connections from the package pin table and validate every peripheral combination before layout release.
Use the manufacturer pin-description and multiplexing tables to separate debug, communication, timer, and analog functions. Avoid assigning a signal to a pin that is required for another peripheral unless the design intentionally supports that alternate combination. For externally exposed interfaces, use controlled-impedance routing where required, keep connectors away from sensitive ADC nodes, and provide a defined return path for each external signal. Recheck boot and programming pins because they commonly share package pins with normal functions.
Design the 1.6 V to 3.6 V supply so it remains within the operating range across temperature, load, and startup conditions. Place the local supply capacitance where the datasheet layout guidance indicates, and treat the MCU supply as a clean rail even when the system includes a switching converter. Verify brownout behavior, reset release, and power-consumption modes in the complete firmware. The processor may run at 48 MHz, but peripheral clocks, unused pins, and sleep-state configuration determine much of the final current draw.
合规信息
The product is listed as green and in a 32-pin TQFP package. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified and therefore remain unknown. AEC-Q100 is not applicable to this general-purpose SAM D21E MCU ordering code.