Broadcom

BCM5241A1IMLG - 10/100BASE-TX Single-Port PHY | Broadcom

Артикул: BCM5241A1IMLG ✓ Активен
10BASE-T and 100BASE-TX Rds(on) HVQFN-32 with exposed pad, 5 x 5 mm Package
MOQ: 1 |

BCM5241A1IMLG Обзор

The Broadcom BCM5241A1IMLG is a single-channel 10/100BASE-TX Ethernet physical-layer transceiver with one Ethernet port, packaged in a 32-pin HVQFN with exposed pad measuring 5 x 5 mm. It supports both 10BASE-T and 100BASE-TX operation and is intended for industrial-temperature networking equipment. The component combines the physical-layer functions required to connect a digital network controller to a copper Ethernet medium.

An Ethernet PHY is the physical-layer device within an Ethernet communications system. In the OSI hierarchy, it sits below the data-link layer and converts digital data into electrical signals suitable for twisted-pair cabling, while recovering signals from the cable at the receiver. A 10/100BASE-TX single-port PHY therefore provides the physical interface for one 10 Mb/s or 100 Mb/s copper network connection. This places the BCM5241A1IMLG in the broader categories of network interface, transceiver, and Ethernet physical-layer IC.

The principal feature set is focused on a single 10/100BASE-TX port, a compact 5 x 5 mm HVQFN-32 package with an exposed thermal pad, and support for industrial-temperature equipment. The exposed pad provides a direct path for heat dissipation through the PCB. Its RoHS status allows use in environmentally constrained production programs, while the industrial-temperature designation broadens its relevance beyond consumer networking products.

The BCM5241A1IMLG belongs to Broadcom's BCM5241 family of Ethernet physical-layer transceivers. Its architecture is intended to sit beside a network media-access controller or other Ethernet MAC within a communications subsystem. This arrangement separates digital packet processing from analog copper-media signal handling and supports scalable network-interface designs without implementing the complete Ethernet protocol stack on one device.

Typical applications include industrial Ethernet switches, embedded routers, network interface cards, set-top equipment, print servers, and industrial control systems requiring a compact 10/100BASE-TX copper port. The single-port architecture is especially suitable for embedded equipment with one network connection, while the exposed-pad package supports compact PCB layouts where continuous copper and careful thermal design are required.

Layout should prioritize short, controlled connections among the PHY, magnetics, line-driver circuitry, and supply network. Place input and output decoupling capacitors close to their associated supply pins, preserve the manufacturer's recommended network interface geometry, and provide adequate copper beneath the exposed pad. Account for the industrial-temperature operating range when selecting passives, magnetics, and the power-supply design.

This product record combines the Broadcom family description, package identification, standards support, lifecycle-oriented sourcing information, and same-family replacement analysis with practical guidance for thermal management, PCB layout, and Ethernet interface implementation.

Аналоги без доработки для BCM5241A1IMLG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с BCM5241A1IMLG (тот же форм-фактор и посадочное место) — отличается по Product Type.

Broadcom
Product Type: Ethernet physical-layer transceiver
Сравнить с BCM5241A1IMLG →

BCM5241A1KMLG

✅ Прямая замена
Broadcom
📦 HVQFN-32-EP (5x5)
Ethernet physical-layer transceiver · 10BASE-T, 100BASE-TX, and 100BASE-EFX · 10 Mb/s and 100 Mb/s · 1 port · 1 driver · 1 receiver · MII · 2.5 V and 3.3 V

Уточнить цену

Открыть даташит →

BCM5241XA1KMLG

✅ Прямая замена
📦 HVQFN-32-EP (5x5)
Same Broadcom BCM5241 series and identical 10BASE-T/100BASE-TX standards; product-classification wording differs between Ethernet PHY and Ethernet transceiver, while the package remains 5 x 5 mm HVQFN-32-EP.

📋 Справочный аналог (нет в каталоге)

BCM5241A1IMLG Максимальные параметры и электрические характеристики

Product Type 10/100BASE-TX single-channel Ethernet transceiver
Ethernet Port Count 1 port
Supported Ethernet Standards 10BASE-T and 100BASE-TX
Data Rate Support 10 Mb/s and 100 Mb/s
Корпус HVQFN-32 with exposed pad, 5 x 5 mm
Число выводов 32 pins
Temperature Grade Industrial temperature
Статус RoHS Compliant
Moisture Sensitivity Level MSL 3
Peak Reflow Temperature 260 C
Terminal Finish Silver
Product Series BCM5241
Device Category Ethernet physical-layer transceiver

Руководство по цоколевке BCM5241A1IMLG в корпусе hvqfn-32 with exposed pad, 5 x 5 mm

Цоколевка для BCM5241A1IMLG (корпус hvqfn-32 with exposed pad, 5 x 5 mm). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса hvqfn-32 with exposed pad, 5 x 5 mm для BCM5241A1IMLG

Нет подробных данных о распиновке для BCM5241A1IMLG.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

BCM5241A1IMLG подходит для 6 применениеs: Industrial Ethernet Control Systems, Embedded Routers and Gateways, Network Interface Cards, Print Servers and Office Equipment, Set-Top and Media Devices, IoT Gateways and Edge Devices.

🏭

Industrial Ethernet Control Systems

The BCM5241A1IMLG fits a single-port industrial Ethernet interface where a control system needs 10BASE-T or 100BASE-TX connectivity close to the controller. Its single-channel architecture avoids allocating additional PHY resources, while the 5 x 5 mm HVQFN-32 footprint limits board area in compact control equipment. The industrial-temperature designation supports designs operating outside typical consumer temperature ranges. In implementation, the PHY must be paired with suitable network magnetics and a controlled layout between the device, magnetics, and connector. Adequate exposed-pad copper and local supply decoupling are essential because Ethernet interface performance depends on clean power and controlled return paths.

🌐

Embedded Routers and Gateways

The BCM5241A1IMLG provides a compact copper-network endpoint for embedded routers, gateways, and protocol converters that require one 10/100BASE-TX port. Supporting both 10 Mb/s and 100 Mb/s operation allows the equipment to participate in legacy 10 Mb/s networks while retaining fast Ethernet capability. The compact HVQFN package is useful where connector placement, signal integrity, and PCB area constrain the design. Placement should account for the copper media interface and magnetics rather than treating the PHY as a digital-only component. Short supply paths, an uninterrupted ground reference, and careful treatment of the exposed pad help maintain reliable operation in industrial or networking environments.

🖥️

Network Interface Cards

The BCM5241A1IMLG is suitable for a single-port network interface card that converts between a host-side digital interface and a 10/100BASE-TX copper connection. Its one-port configuration matches compact add-in cards and embedded communication modules without requiring a multiport PHY arrangement. The 5 x 5 mm package leaves routing space for the host interface, isolation components, and RJ-series network connector. Designers should follow the Broadcom reference layout for the PHY-to-magnetics path and keep high-frequency return currents within a continuous ground plane. Thermal performance also depends on the exposed pad being connected to an adequate copper area rather than left thermally isolated.

🔧

Print Servers and Office Equipment

The BCM5241A1IMLG can provide the copper Ethernet connection in print servers, scanners, and networked office appliances. A single 10/100BASE-TX port matches common peripheral-network requirements, while support for both 10 Mb/s and 100 Mb/s enables interoperability with existing office networks. The compact HVQFN package minimizes PCB consumption beside the processor and connector. Because copper Ethernet interfaces can be sensitive to implementation details, the PHY should be placed close to the magnetics, and supply and ground planes should remain continuous beneath the device. The exposed-pad copper should also provide a predictable thermal path, especially in enclosed equipment with limited airflow.

📺

Set-Top and Media Devices

The BCM5241A1IMLG suits set-top boxes, media appliances, and display equipment that need a single wired Ethernet connection. Its 10BASE-T and 100BASE-TX support covers the fast-Ethernet networks commonly used for media transport and device management. The small 5 x 5 mm HVQFN-32 package conserves board space next to an Ethernet connector and its isolation components. A compact design still requires disciplined layout: maintain a continuous ground plane under the PHY, place decoupling close to its supply pins, and follow the manufacturer guidance for the copper interface. The exposed pad provides an efficient thermal path where the enclosure limits natural convection.

🧩

IoT Gateways and Edge Devices

The BCM5241A1IMLG provides a reliable copper Ethernet option for IoT gateways and edge devices that need a wired fallback or primary communication link. One-port 10/100BASE-TX support is appropriate for sensors, controllers, and local edge nodes operating near network infrastructure. Its industrial-temperature classification is beneficial in enclosure temperatures that exceed consumer-grade conditions. The implementation should isolate the PHY from high-energy external circuits and route the copper-media signals through the manufacturer-recommended network interface. Local decoupling, an exposed-pad thermal connection, and controlled placement relative to magnetics help make the compact 5 x 5 mm package practical in space-constrained edge hardware.

What is the BCM5241A1IMLG?
The BCM5241A1IMLG is a Broadcom single-channel 10/100BASE-TX Ethernet physical-layer transceiver for one copper-network port. It supports both 10BASE-T and 100BASE-TX operation and comes in a 32-pin HVQFN package with an exposed pad measuring 5 x 5 mm. According to the Broadcom BCM5241 Product Brief, the device is intended for networking applications where an Ethernet PHY connects a digital network controller to a copper physical medium.
Where can I download the BCM5241A1IMLG datasheet?
The BCM5241A1IMLG datasheet and product information can be obtained from the Broadcom BCM5241 Product Brief at the official documentation link on this page. The part is described there as an Ethernet physical-layer transceiver for networking applications. The BCM5241A1IMLG identifier also appears in indexed two-page PDF documents, but the manufacturer documentation is the preferred reference for pin assignments, electrical limits, and recommended application circuits.
What is the BCM5241A1IMLG pinout?
The BCM5241A1IMLG uses a 32-pin HVQFN package with an exposed pad, but the complete numbered pin assignment is not reproduced in the indexed product material available on this page. Use the Broadcom BCM5241 Product Brief and the manufacturer datasheet pin-description table when assigning PCB tracks or reviewing signal names. The exposed thermal pad is distinct from the numbered perimeter pins and must be connected according to the manufacturer layout guidance.
What package does the BCM5241A1IMLG use?
The BCM5241A1IMLG is packaged in a 32-pin HVQFN with an exposed pad measuring 5 x 5 mm. Distributor and component listings identify the package as HVQFN-32-EP, also described as a QFN-32 with an exposed thermal pad. The exposed pad is primarily a heat-transfer structure and should be connected to the recommended PCB ground or thermal plane as directed in the manufacturer layout documentation.
What Ethernet speeds does the BCM5241A1IMLG support?
The BCM5241A1IMLG supports 10BASE-T and 100BASE-TX operation on one Ethernet channel. These standards correspond to 10 Mb/s and 100 Mb/s copper networking rates, respectively. The Broadcom BCM5241 Product Brief classifies the device as an Ethernet physical-layer transceiver, making it suitable for a network controller or MAC that requires a single 10/100 copper port.
Is the BCM5241A1IMLG suitable for industrial equipment?
The BCM5241A1IMLG is identified as an industrial-temperature, single-port 10/100BASE-TX transceiver with RoHS compliance. Those characteristics make it appropriate for industrial control, networking, and embedded equipment operating across an extended temperature range. Confirm the complete electrical limits, power dissipation, and external component requirements against the manufacturer datasheet before releasing the design for production.
What can replace the BCM5241A1IMLG?
The BCM5241A1KMLG and BCM5241XA1KMLG are the closest same-brand BCM5241-family candidates for evaluating as replacements for the BCM5241A1IMLG. Both appear in same-package comparison material, and the indexed specifications identify the same 10BASE-T and 100BASE-TX standards. A board-level substitution should still be checked against register behavior, clocking, strap options, and pin-level functions in the manufacturer documentation.
BCM5241A1IMLG vs BCM5241A1KMLG - which is the better fit?
The BCM5241A1IMLG and BCM5241A1KMLG are closely related Broadcom BCM5241 parts supporting 10BASE-T and 100BASE-TX operation. The indexed comparison identifies Broadcom as the manufacturer and places both in the Ethernet-PHY and transceiver product categories, while noting a classification difference between Ethernet PHYs and Ethernet transceivers. Choose the final device only after confirming its exact pin functions, feature options, and register map.
When should I choose the BCM5241A1IMLG instead of BCM5241XA1KMLG?
Choose the BCM5241A1IMLG when its exact ordering code, specified feature set, and temperature designation match the Ethernet subsystem under development. The indexed comparison places both parts in the Broadcom BCM5241 series and identifies the same 10BASE-T and 100BASE-TX standards, but their descriptions differ between Ethernet PHYs and Ethernet transceivers. Review the manufacturer ordering guide to determine whether any feature suffix affects the intended design.
Can BCM5241XA1KMLG replace BCM5241A1IMLG on the same PCB?
BCM5241XA1KMLG may be a candidate for review, but a guaranteed drop-in replacement requires confirmation of pin-to-pin compatibility, supply voltage, clocking, register behavior, strap inputs, and exposed-pad connection. The indexed comparison shows the same Broadcom BCM5241 series and the same 10BASE-T and 100BASE-TX standards, which establishes functional relevance but does not by itself confirm every electrical and software detail.
Where can I buy the BCM5241A1IMLG?
Use the Request a Quote form on this page to request current BCM5241A1IMLG availability, lead time, and order handling. The exact MPN is listed by Broadcom as a single-port 10/100BASE-TX Ethernet transceiver, and current distributor listings indicate that the part is commercially sourced. Your quotation request should identify the required quantity, package suffix, and any date-code or traceability requirements.
What is the price of the BCM5241A1IMLG?
Current BCM5241A1IMLG commercial terms are handled through the Request a Quote form on this page. The indexed product listings compare bulk commercial offers, but a dependable quantity-break price for this exact ordering code is not established by the cited pages. Submit the required quantity and any packaging or date-code constraints with the quote request to obtain the applicable commercial response.
Is the BCM5241A1IMLG in stock and what is its lead time?
The BCM5241A1IMLG is currently offered by multiple distribution channels, but stock and lead time can change with order volume. Request current availability and lead time through the Request a Quote form on this page. Include your annual usage, forecast horizon, and required packaging details so the commercial response reflects the correct production requirement.
What are the key specifications of BCM5241A1IMLG that engineers should know?
The BCM5241A1IMLG is a one-port Ethernet PHY supporting 10BASE-T and 100BASE-TX, with 10 Mb/s and 100 Mb/s data-rate support. It uses a 32-pin HVQFN package with an exposed pad measuring 5 x 5 mm, carries an industrial-temperature designation, and is listed as RoHS compliant. The Broadcom BCM5241 Product Brief is the principal reference for architecture and application guidance.
Does the BCM5241A1IMLG comply with RoHS and automotive qualification requirements?
The BCM5241A1IMLG is identified as RoHS compliant, while its automotive-qualification status is not established by the indexed product information. It is described as an industrial-temperature part, but industrial temperature does not automatically mean AEC-Q100 qualification. Confirm AEC-Q100 status, reliability grade, and production qualification requirements directly with Broadcom before using the device in an automotive design.

Справочные инженерные данные для BCM5241A1IMLG — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the BCM5241A1IMLG when a compact product needs one 10/100BASE-TX copper port, an industrial-temperature device, and a 5 x 5 mm HVQFN-32 footprint with an exposed thermal pad. Evaluate BCM5241A1KMLG first when its ordering-code feature option is required because it belongs to the same Broadcom BCM5241 family and shares the package and stated Ethernet standards. Consider BCM5241XA1KMLG when its documented feature option better matches the design. Before approving either substitution, compare supply voltage, exposed-pad connections, strap settings, clock requirements, register behavior, and every numbered pin. Neither same-brand candidate should be treated as an automatic replacement until those checks pass.

Сравнение с аналогами

Параметр Этот товар BCM5241A1KMLG BCM5241XA1KMLG
Brand Broadcom Broadcom Broadcom
Package HVQFN-32-EP (5x5) HVQFN-32-EP (5x5) HVQFN-32-EP (5x5)
Product Series BCM5241 BCM5241 BCM5241
Ethernet Standards 10BASE-T, 100BASE-TX 10BASE-T, 100BASE-TX 10BASE-T, 100BASE-TX
Port Count 1 1 1
Product Classification Ethernet PHY Ethernet Transceiver Ethernet Transceiver

Ключевые отличия

  • Single-port 10/100BASE-TX integration (против BCM5241XA1KMLG)
  • Identical 5 x 5 mm HVQFN-32-EP footprint (против BCM5241A1KMLG)
  • Industrial-temperature positioning (против BCM5241A1IMLG)

Заметки по проектированию

Use the Broadcom BCM5241 reference layout as the authority for the relationship between the PHY, isolation components, and network connector. The copper-media path is sensitive to discontinuities and return-current interruptions, so avoid routing it around plane splits or unrelated high-current paths. Keep the PHY-to-magnetics section compact and observe the manufacturer's component spacing and impedance guidance.

The 5 x 5 mm HVQFN-32 package uses an exposed pad as its primary heat-transfer surface. Connect that pad to the recommended PCB thermal and ground structure, use multiple thermal-via connections where the layout rules call for them, and avoid placing the device next to a localized heat source. Confirm the final junction-temperature margin with the actual airflow, copper area, and supply-loss condition.

Place supply decoupling capacitors at the pins identified by the manufacturer layout, and keep their return paths within the relevant ground reference. Review the datasheet for the operating voltage, internal regulator behavior, and sequencing limits before selecting external passive components. Do not infer those electrical limits from the 10/100BASE-TX description alone.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

RoHS compliance is identified by the component listing. Industrial-temperature status does not establish AEC-Q100 qualification, and no additional compliance claims are made without manufacturer confirmation.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

bcm5241a1imlg datasheet BCM5241A1IMLG datasheet pdf BCM5241A1IMLG pinout BCM5241A1IMLG equivalent BCM5241A1IMLG replacement BCM5241A1IMLG vs BCM5241A1KMLG BCM5241A1IMLG HVQFN-32 footprint Broadcom BCM5241A1IMLG BCM5241A1IMLG 10/100BASE-TX BCM5241A1IMLG price BCM5241A1IMLG stock BCM5241A1IMLG industrial Ethernet PHY

Связанные компоненты & термины

Broadcom BCM5241A1IMLG BCM5241A1KMLG BCM5241XA1KMLG BCM5241 Ethernet PHY Ethernet transceiver 10BASE-T 100BASE-TX 10 Mb/s 100 Mb/s HVQFN-32-EP QFN family surface mount exposed pad industrial temperature Ethernet MAC physical layer twisted-pair cable network magnetics RoHS
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ