BCM5241A1IMLG - 10/100BASE-TX Single-Port PHY | Broadcom
料号: BCM5241A1IMLG ✓ 量产中BCM5241A1IMLG 概述
An Ethernet PHY is the physical-layer device within an Ethernet communications system. In the OSI hierarchy, it sits below the data-link layer and converts digital data into electrical signals suitable for twisted-pair cabling, while recovering signals from the cable at the receiver. A 10/100BASE-TX single-port PHY therefore provides the physical interface for one 10 Mb/s or 100 Mb/s copper network connection. This places the BCM5241A1IMLG in the broader categories of network interface, transceiver, and Ethernet physical-layer IC.
The principal feature set is focused on a single 10/100BASE-TX port, a compact 5 x 5 mm HVQFN-32 package with an exposed thermal pad, and support for industrial-temperature equipment. The exposed pad provides a direct path for heat dissipation through the PCB. Its RoHS status allows use in environmentally constrained production programs, while the industrial-temperature designation broadens its relevance beyond consumer networking products.
The BCM5241A1IMLG belongs to Broadcom's BCM5241 family of Ethernet physical-layer transceivers. Its architecture is intended to sit beside a network media-access controller or other Ethernet MAC within a communications subsystem. This arrangement separates digital packet processing from analog copper-media signal handling and supports scalable network-interface designs without implementing the complete Ethernet protocol stack on one device.
Typical applications include industrial Ethernet switches, embedded routers, network interface cards, set-top equipment, print servers, and industrial control systems requiring a compact 10/100BASE-TX copper port. The single-port architecture is especially suitable for embedded equipment with one network connection, while the exposed-pad package supports compact PCB layouts where continuous copper and careful thermal design are required.
Layout should prioritize short, controlled connections among the PHY, magnetics, line-driver circuitry, and supply network. Place input and output decoupling capacitors close to their associated supply pins, preserve the manufacturer's recommended network interface geometry, and provide adequate copper beneath the exposed pad. Account for the industrial-temperature operating range when selecting passives, magnetics, and the power-supply design.
This product record combines the Broadcom family description, package identification, standards support, lifecycle-oriented sourcing information, and same-family replacement analysis with practical guidance for thermal management, PCB layout, and Ethernet interface implementation.
直接替换替代料: BCM5241A1IMLG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: BCM5241A1IMLG (相同外形与封装尺寸) ——差异在于 Product Type.
BCM5241A1KMLG
✅ 直接替换联系询价
查看数据手册 →BCM5241XA1KMLG
✅ 直接替换📋 参考替代料(不在目录中)
BCM5241A1IMLG 最大额定值与电气特性
| Product Type | 10/100BASE-TX single-channel Ethernet transceiver |
| Ethernet Port Count | 1 port |
| Supported Ethernet Standards | 10BASE-T and 100BASE-TX |
| Data Rate Support | 10 Mb/s and 100 Mb/s |
| 封装 | HVQFN-32 with exposed pad, 5 x 5 mm |
| 引脚数量 | 32 pins |
| Temperature Grade | Industrial temperature |
| RoHS 状态 | Compliant |
| Moisture Sensitivity Level | MSL 3 |
| Peak Reflow Temperature | 260 C |
| Terminal Finish | Silver |
| Product Series | BCM5241 |
| Device Category | Ethernet physical-layer transceiver |
BCM5241A1IMLG hvqfn-32 with exposed pad, 5 x 5 mm 引脚配置指南
BCM5241A1IMLG(hvqfn-32 with exposed pad, 5 x 5 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: BCM5241A1IMLG.
请参阅 数据手册 以查看完整引脚配置。
典型应用
BCM5241A1IMLG 适用于 6 应用s: Industrial Ethernet Control Systems, Embedded Routers and Gateways, Network Interface Cards, Print Servers and Office Equipment, Set-Top and Media Devices, IoT Gateways and Edge Devices.
Industrial Ethernet Control Systems
The BCM5241A1IMLG fits a single-port industrial Ethernet interface where a control system needs 10BASE-T or 100BASE-TX connectivity close to the controller. Its single-channel architecture avoids allocating additional PHY resources, while the 5 x 5 mm HVQFN-32 footprint limits board area in compact control equipment. The industrial-temperature designation supports designs operating outside typical consumer temperature ranges. In implementation, the PHY must be paired with suitable network magnetics and a controlled layout between the device, magnetics, and connector. Adequate exposed-pad copper and local supply decoupling are essential because Ethernet interface performance depends on clean power and controlled return paths.
推荐
Embedded Routers and Gateways
The BCM5241A1IMLG provides a compact copper-network endpoint for embedded routers, gateways, and protocol converters that require one 10/100BASE-TX port. Supporting both 10 Mb/s and 100 Mb/s operation allows the equipment to participate in legacy 10 Mb/s networks while retaining fast Ethernet capability. The compact HVQFN package is useful where connector placement, signal integrity, and PCB area constrain the design. Placement should account for the copper media interface and magnetics rather than treating the PHY as a digital-only component. Short supply paths, an uninterrupted ground reference, and careful treatment of the exposed pad help maintain reliable operation in industrial or networking environments.
推荐
Network Interface Cards
The BCM5241A1IMLG is suitable for a single-port network interface card that converts between a host-side digital interface and a 10/100BASE-TX copper connection. Its one-port configuration matches compact add-in cards and embedded communication modules without requiring a multiport PHY arrangement. The 5 x 5 mm package leaves routing space for the host interface, isolation components, and RJ-series network connector. Designers should follow the Broadcom reference layout for the PHY-to-magnetics path and keep high-frequency return currents within a continuous ground plane. Thermal performance also depends on the exposed pad being connected to an adequate copper area rather than left thermally isolated.
推荐
Print Servers and Office Equipment
The BCM5241A1IMLG can provide the copper Ethernet connection in print servers, scanners, and networked office appliances. A single 10/100BASE-TX port matches common peripheral-network requirements, while support for both 10 Mb/s and 100 Mb/s enables interoperability with existing office networks. The compact HVQFN package minimizes PCB consumption beside the processor and connector. Because copper Ethernet interfaces can be sensitive to implementation details, the PHY should be placed close to the magnetics, and supply and ground planes should remain continuous beneath the device. The exposed-pad copper should also provide a predictable thermal path, especially in enclosed equipment with limited airflow.
推荐
Set-Top and Media Devices
The BCM5241A1IMLG suits set-top boxes, media appliances, and display equipment that need a single wired Ethernet connection. Its 10BASE-T and 100BASE-TX support covers the fast-Ethernet networks commonly used for media transport and device management. The small 5 x 5 mm HVQFN-32 package conserves board space next to an Ethernet connector and its isolation components. A compact design still requires disciplined layout: maintain a continuous ground plane under the PHY, place decoupling close to its supply pins, and follow the manufacturer guidance for the copper interface. The exposed pad provides an efficient thermal path where the enclosure limits natural convection.
推荐
IoT Gateways and Edge Devices
The BCM5241A1IMLG provides a reliable copper Ethernet option for IoT gateways and edge devices that need a wired fallback or primary communication link. One-port 10/100BASE-TX support is appropriate for sensors, controllers, and local edge nodes operating near network infrastructure. Its industrial-temperature classification is beneficial in enclosure temperatures that exceed consumer-grade conditions. The implementation should isolate the PHY from high-energy external circuits and route the copper-media signals through the manufacturer-recommended network interface. Local decoupling, an exposed-pad thermal connection, and controlled placement relative to magnetics help make the compact 5 x 5 mm package practical in space-constrained edge hardware.
推荐
推荐产品汇总
工程参考数据: BCM5241A1IMLG ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | BCM5241A1KMLG | BCM5241XA1KMLG |
|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom |
| Package | HVQFN-32-EP (5x5) | HVQFN-32-EP (5x5) | HVQFN-32-EP (5x5) |
| Product Series | BCM5241 | BCM5241 | BCM5241 |
| Ethernet Standards | 10BASE-T, 100BASE-TX | 10BASE-T, 100BASE-TX | 10BASE-T, 100BASE-TX |
| Port Count | 1 | 1 | 1 |
| Product Classification | Ethernet PHY | Ethernet Transceiver | Ethernet Transceiver |
关键差异点
- Single-port 10/100BASE-TX integration (对比 BCM5241XA1KMLG)
- Identical 5 x 5 mm HVQFN-32-EP footprint (对比 BCM5241A1KMLG)
- Industrial-temperature positioning (对比 BCM5241A1IMLG)
设计说明
Use the Broadcom BCM5241 reference layout as the authority for the relationship between the PHY, isolation components, and network connector. The copper-media path is sensitive to discontinuities and return-current interruptions, so avoid routing it around plane splits or unrelated high-current paths. Keep the PHY-to-magnetics section compact and observe the manufacturer's component spacing and impedance guidance.
The 5 x 5 mm HVQFN-32 package uses an exposed pad as its primary heat-transfer surface. Connect that pad to the recommended PCB thermal and ground structure, use multiple thermal-via connections where the layout rules call for them, and avoid placing the device next to a localized heat source. Confirm the final junction-temperature margin with the actual airflow, copper area, and supply-loss condition.
Place supply decoupling capacitors at the pins identified by the manufacturer layout, and keep their return paths within the relevant ground reference. Review the datasheet for the operating voltage, internal regulator behavior, and sequencing limits before selecting external passive components. Do not infer those electrical limits from the 10/100BASE-TX description alone.
合规信息
RoHS compliance is identified by the component listing. Industrial-temperature status does not establish AEC-Q100 qualification, and no additional compliance claims are made without manufacturer confirmation.