BCM5241A1IMLG - 10/100BASE-TX Single-Port PHY | Broadcom
MPN: BCM5241A1IMLG ✓ فعالBCM5241A1IMLG جائزہ
An Ethernet PHY is the physical-layer device within an Ethernet communications system. In the OSI hierarchy, it sits below the data-link layer and converts digital data into electrical signals suitable for twisted-pair cabling, while recovering signals from the cable at the receiver. A 10/100BASE-TX single-port PHY therefore provides the physical interface for one 10 Mb/s or 100 Mb/s copper network connection. This places the BCM5241A1IMLG in the broader categories of network interface, transceiver, and Ethernet physical-layer IC.
The principal feature set is focused on a single 10/100BASE-TX port, a compact 5 x 5 mm HVQFN-32 package with an exposed thermal pad, and support for industrial-temperature equipment. The exposed pad provides a direct path for heat dissipation through the PCB. Its RoHS status allows use in environmentally constrained production programs, while the industrial-temperature designation broadens its relevance beyond consumer networking products.
The BCM5241A1IMLG belongs to Broadcom's BCM5241 family of Ethernet physical-layer transceivers. Its architecture is intended to sit beside a network media-access controller or other Ethernet MAC within a communications subsystem. This arrangement separates digital packet processing from analog copper-media signal handling and supports scalable network-interface designs without implementing the complete Ethernet protocol stack on one device.
Typical applications include industrial Ethernet switches, embedded routers, network interface cards, set-top equipment, print servers, and industrial control systems requiring a compact 10/100BASE-TX copper port. The single-port architecture is especially suitable for embedded equipment with one network connection, while the exposed-pad package supports compact PCB layouts where continuous copper and careful thermal design are required.
Layout should prioritize short, controlled connections among the PHY, magnetics, line-driver circuitry, and supply network. Place input and output decoupling capacitors close to their associated supply pins, preserve the manufacturer's recommended network interface geometry, and provide adequate copper beneath the exposed pad. Account for the industrial-temperature operating range when selecting passives, magnetics, and the power-supply design.
This product record combines the Broadcom family description, package identification, standards support, lifecycle-oriented sourcing information, and same-family replacement analysis with practical guidance for thermal management, PCB layout, and Ethernet interface implementation.
کے لیے ڈراپ اِن متبادل BCM5241A1IMLG — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں BCM5241A1IMLG (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Product Type.
BCM5241A1KMLG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →BCM5241XA1KMLG
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
BCM5241A1IMLG زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 10/100BASE-TX single-channel Ethernet transceiver |
| Ethernet Port Count | 1 port |
| Supported Ethernet Standards | 10BASE-T and 100BASE-TX |
| Data Rate Support | 10 Mb/s and 100 Mb/s |
| پیکیج | HVQFN-32 with exposed pad, 5 x 5 mm |
| پن کی تعداد | 32 pins |
| Temperature Grade | Industrial temperature |
| RoHS اسٹیٹس | Compliant |
| Moisture Sensitivity Level | MSL 3 |
| Peak Reflow Temperature | 260 C |
| Terminal Finish | Silver |
| Product Series | BCM5241 |
| Device Category | Ethernet physical-layer transceiver |
BCM5241A1IMLG hvqfn-32 with exposed pad, 5 x 5 mm پن کنفیگریشن گائیڈ
BCM5241A1IMLG (hvqfn-32 with exposed pad, 5 x 5 mm پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں BCM5241A1IMLG.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
BCM5241A1IMLG کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Ethernet Control Systems, Embedded Routers and Gateways, Network Interface Cards, Print Servers and Office Equipment, Set-Top and Media Devices, IoT Gateways and Edge Devices.
Industrial Ethernet Control Systems
The BCM5241A1IMLG fits a single-port industrial Ethernet interface where a control system needs 10BASE-T or 100BASE-TX connectivity close to the controller. Its single-channel architecture avoids allocating additional PHY resources, while the 5 x 5 mm HVQFN-32 footprint limits board area in compact control equipment. The industrial-temperature designation supports designs operating outside typical consumer temperature ranges. In implementation, the PHY must be paired with suitable network magnetics and a controlled layout between the device, magnetics, and connector. Adequate exposed-pad copper and local supply decoupling are essential because Ethernet interface performance depends on clean power and controlled return paths.
تجویز کردہ
Embedded Routers and Gateways
The BCM5241A1IMLG provides a compact copper-network endpoint for embedded routers, gateways, and protocol converters that require one 10/100BASE-TX port. Supporting both 10 Mb/s and 100 Mb/s operation allows the equipment to participate in legacy 10 Mb/s networks while retaining fast Ethernet capability. The compact HVQFN package is useful where connector placement, signal integrity, and PCB area constrain the design. Placement should account for the copper media interface and magnetics rather than treating the PHY as a digital-only component. Short supply paths, an uninterrupted ground reference, and careful treatment of the exposed pad help maintain reliable operation in industrial or networking environments.
تجویز کردہ
Network Interface Cards
The BCM5241A1IMLG is suitable for a single-port network interface card that converts between a host-side digital interface and a 10/100BASE-TX copper connection. Its one-port configuration matches compact add-in cards and embedded communication modules without requiring a multiport PHY arrangement. The 5 x 5 mm package leaves routing space for the host interface, isolation components, and RJ-series network connector. Designers should follow the Broadcom reference layout for the PHY-to-magnetics path and keep high-frequency return currents within a continuous ground plane. Thermal performance also depends on the exposed pad being connected to an adequate copper area rather than left thermally isolated.
تجویز کردہ
Print Servers and Office Equipment
The BCM5241A1IMLG can provide the copper Ethernet connection in print servers, scanners, and networked office appliances. A single 10/100BASE-TX port matches common peripheral-network requirements, while support for both 10 Mb/s and 100 Mb/s enables interoperability with existing office networks. The compact HVQFN package minimizes PCB consumption beside the processor and connector. Because copper Ethernet interfaces can be sensitive to implementation details, the PHY should be placed close to the magnetics, and supply and ground planes should remain continuous beneath the device. The exposed-pad copper should also provide a predictable thermal path, especially in enclosed equipment with limited airflow.
تجویز کردہ
Set-Top and Media Devices
The BCM5241A1IMLG suits set-top boxes, media appliances, and display equipment that need a single wired Ethernet connection. Its 10BASE-T and 100BASE-TX support covers the fast-Ethernet networks commonly used for media transport and device management. The small 5 x 5 mm HVQFN-32 package conserves board space next to an Ethernet connector and its isolation components. A compact design still requires disciplined layout: maintain a continuous ground plane under the PHY, place decoupling close to its supply pins, and follow the manufacturer guidance for the copper interface. The exposed pad provides an efficient thermal path where the enclosure limits natural convection.
تجویز کردہ
IoT Gateways and Edge Devices
The BCM5241A1IMLG provides a reliable copper Ethernet option for IoT gateways and edge devices that need a wired fallback or primary communication link. One-port 10/100BASE-TX support is appropriate for sensors, controllers, and local edge nodes operating near network infrastructure. Its industrial-temperature classification is beneficial in enclosure temperatures that exceed consumer-grade conditions. The implementation should isolate the PHY from high-energy external circuits and route the copper-media signals through the manufacturer-recommended network interface. Local decoupling, an exposed-pad thermal connection, and controlled placement relative to magnetics help make the compact 5 x 5 mm package practical in space-constrained edge hardware.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا BCM5241A1IMLG — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | BCM5241A1KMLG | BCM5241XA1KMLG |
|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom |
| Package | HVQFN-32-EP (5x5) | HVQFN-32-EP (5x5) | HVQFN-32-EP (5x5) |
| Product Series | BCM5241 | BCM5241 | BCM5241 |
| Ethernet Standards | 10BASE-T, 100BASE-TX | 10BASE-T, 100BASE-TX | 10BASE-T, 100BASE-TX |
| Port Count | 1 | 1 | 1 |
| Product Classification | Ethernet PHY | Ethernet Transceiver | Ethernet Transceiver |
اہم امتیازی خصوصیات
- Single-port 10/100BASE-TX integration (بمقابلہBCM5241XA1KMLG)
- Identical 5 x 5 mm HVQFN-32-EP footprint (بمقابلہBCM5241A1KMLG)
- Industrial-temperature positioning (بمقابلہBCM5241A1IMLG)
ڈیزائن نوٹس
Use the Broadcom BCM5241 reference layout as the authority for the relationship between the PHY, isolation components, and network connector. The copper-media path is sensitive to discontinuities and return-current interruptions, so avoid routing it around plane splits or unrelated high-current paths. Keep the PHY-to-magnetics section compact and observe the manufacturer's component spacing and impedance guidance.
The 5 x 5 mm HVQFN-32 package uses an exposed pad as its primary heat-transfer surface. Connect that pad to the recommended PCB thermal and ground structure, use multiple thermal-via connections where the layout rules call for them, and avoid placing the device next to a localized heat source. Confirm the final junction-temperature margin with the actual airflow, copper area, and supply-loss condition.
Place supply decoupling capacitors at the pins identified by the manufacturer layout, and keep their return paths within the relevant ground reference. Review the datasheet for the operating voltage, internal regulator behavior, and sequencing limits before selecting external passive components. Do not infer those electrical limits from the 10/100BASE-TX description alone.
تعمیل کی معلومات
RoHS compliance is identified by the component listing. Industrial-temperature status does not establish AEC-Q100 qualification, and no additional compliance claims are made without manufacturer confirmation.