Analog Devices

DG412EUE+ - Quad SPST Analog Switch | Analog Devices

Артикул: DG412EUE+ ✓ Активен
45 ohm Rds(on) 16-pin TSSOP Package
MOQ: 1 |

DG412EUE+ Обзор

Analog Devices DG412EUE+ is an improved quad SPST analog switch with four independently controlled 1:1 channels, 45 ohm on resistance, and a 16-pin TSSOP package. It is designed for bidirectional analog-signal routing and supports an operating temperature range of -40°C to +85°C. The device is listed in production by the manufacturer and is suitable for precision test systems, measurement equipment, and signal-routing circuits.

An analog switch is a semiconductor device that connects or disconnects signal paths under digital control. As an analog switch, the DG412EUE+ belongs to the broader switch IC and interface IC hierarchy. Its four SPST channels provide independent normally open paths, allowing one controller to select among several analog sources or destinations while preserving the selected signal without converting it to a digital representation.

The DG412 family is engineered for improved channel matching, with on-resistance matching specified at no more than 3 ohms. Guaranteed on-resistance flatness across the signal range is specified at no more than 4 ohms. These characteristics reduce channel-to-channel gain variation and distortion when multiple switched paths must operate consistently. The DG412EUE+ also provides bidirectional operation, allowing each SPST path to conduct signal flow in either direction.

The compact 16-pin TSSOP package supports surface-mount PCB assembly and provides access to four control inputs, four analog terminals, ground connections, and positive supply connections. Device control and signal-path details must be assigned using the pin-description table in the manufacturer datasheet. The EUE ordering code identifies the 16-pin TSSOP configuration, while the trailing plus sign denotes the manufacturer's improved product designation.

Typical uses include automated test equipment, instrumentation, communications routing, sample-and-hold systems, and peripheral-selection networks. The four independent SPST switches are especially useful where one board must route several precision analog channels without adding mechanical relays. Because the switch resistance and flatness characteristics are controlled, engineers can evaluate insertion loss and channel matching across the intended signal range rather than relying only on the nominal 45-ohm value.

PCB design should keep analog routes short and symmetric, place decoupling capacitance close to the supply pins, and provide adequate return paths for control and switched signals. The TSSOP footprint offers finer routing density than a larger SOIC package, but it requires careful land-pattern construction and clean assembly practices. Verify logic levels, supply voltage, signal-range limits, and switching conditions in the manufacturer datasheet before finalizing the interface circuit.

This page combines the production status, package information, switch characteristics, thermal limits, and available drop-in comparison information into an application-oriented resource. It also identifies design considerations that help engineers evaluate the DG412EUE+ alongside pin-compatible alternatives without overlooking package, control-interface, or signal-integrity differences.

Аналоги без доработки для DG412EUE+ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

DG412CUE+

✅ Прямая замена
📦 16-TSSOP
Same 4-channel SPST architecture, 45-ohm nominal on resistance, and 16-TSSOP package; ordering-code-specific temperature, marking, and qualification details require confirmation.

📋 Справочный аналог (нет в каталоге)

DG412EUE+ Максимальные параметры и электрические характеристики

Number of Switches 4 circuits
Switch Configuration Quad SPST, normally open
Multiplexer Configuration 1:1
Nominal On Resistance 45 ohm
On-Resistance Matching 3 ohm maximum
On-Resistance Flatness 4 ohm maximum
Signal Conduction Bidirectional
Диапазон рабочих температур -40°C to +85°C
Корпус 16-pin TSSOP
Тип монтажа Surface mount
Production Status Production
Packaging Tube

Руководство по цоколевке DG412EUE+ в корпусе 16-pin tssop

Цоколевка для DG412EUE+ (корпус 16-pin tssop). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 16-pin tssop для DG412EUE+

Нет подробных данных о распиновке для DG412EUE+.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

DG412EUE+ подходит для 6 применениеs: Automated Test Equipment Signal Routing, Precision Measurement and Instrumentation, Communications Path Selection, Sample-and-Hold Signal Selection, Sensor Signal Multiplexing, Data Acquisition Channel Isolation.

🏭

Automated Test Equipment Signal Routing

The DG412EUE+ fits automated test equipment that must connect multiple analog sources, instruments, or fixtures through independent paths. Its four SPST 1:1 channels provide straightforward routing control, while the 45-ohm nominal on resistance establishes the basic insertion-loss budget. Channel matching of no more than 3 ohms and on-resistance flatness of no more than 4 ohms help limit measurement variation between paths. Use the switch near the routed nodes and place supply decoupling close to the TSSOP power pins. Exact logic levels, signal-range limits, and control timing should be confirmed in the manufacturer datasheet before connecting precision front ends.

🔧

Precision Measurement and Instrumentation

The DG412EUE+ is useful in measurement instruments that require controllable analog paths without mechanical relay switching. Four independently controlled, normally open SPST channels can select test inputs, attenuator networks, sensors, or reference paths. The controlled 3-ohm maximum on-resistance matching is important when comparing readings across multiple channels, and the 4-ohm maximum flatness specification reduces variation over the usable signal range. Account for the nominal 45-ohm resistance in the gain and noise budget, use short PCB routes, and verify leakage, bandwidth, and analog-signal limits for the specific operating conditions.

🌐

Communications Path Selection

The DG412EUE+ can serve as a low-frequency communications path-selection element when four bidirectional SPST channels are sufficient. Bidirectional conduction allows each path to support signal flow in either direction, while independent control supports channel isolation and routing between multiple nodes. The 45-ohm nominal on resistance and 4-ohm maximum flatness must be included in the channel loss calculation, especially near the upper end of the supported signal range. Confirm supply voltage, control thresholds, leakage, and switching transients against the DG412 datasheet, and keep the compact TSSOP routing symmetrical to minimize parasitic differences.

📺

Sample-and-Hold Signal Selection

The DG412EUE+ can select among several sampled or buffered analog signals in a sample-and-hold subsystem. Its four 1:1 SPST paths make each switched terminal available for connection to a shared acquisition or hold circuit, and the controlled on-resistance matching helps preserve consistency between selections. Because the nominal on resistance is 45 ohms, the downstream buffer must have sufficient input impedance to avoid excessive loading. The 4-ohm maximum on-resistance flatness specification is also relevant when signal amplitude changes across the selected range. Validate settling behavior, control timing, leakage, and allowable signal voltages in the manufacturer datasheet.

🧩

Sensor Signal Multiplexing

The DG412EUE+ can route low-frequency sensor outputs into a common analog processing path when four independently controlled channels are adequate. Controlled on-resistance matching of no more than 3 ohms reduces channel-dependent amplitude errors, while bidirectional paths provide flexibility when sensors or conditioners are connected in either direction. The 45-ohm nominal resistance should be included in the sensor-source impedance calculation to prevent loading errors. Use a quiet ground plane, minimize analog trace length, and place any required bypass capacitor at the power pins. Confirm input bias current, leakage, and signal-range requirements before selecting the device.

📡

Data Acquisition Channel Isolation

The DG412EUE+ supports data-acquisition systems that need to connect or isolate several analog channels under software control. Four normally open SPST switches provide independent paths without crosstalk through an active multiplexer topology. The specified 3-ohm maximum on-resistance matching and 4-ohm maximum flatness help maintain consistency between channels, although the nominal 45-ohm contribution must be included in the input-impedance design. Keep analog routing compact, provide a continuous ground reference, and isolate switching-control traces from sensitive sensor lines. Review leakage, settling time, supply levels, and application-specific qualifications in the manufacturer datasheet.

What is the DG412EUE+ analog switch?
The DG412EUE+ is an improved quad SPST analog switch with four independently controlled 1:1 channels in a 16-pin TSSOP package. According to the Analog Devices DG412 datasheet, Revision 7, it provides nominal 45-ohm on resistance, on-resistance matching up to 3 ohms, and on-resistance flatness up to 4 ohms. Each channel is bidirectional, making the device suitable for routing precision analog signals in either direction.
Where can I download the DG412EUE+ datasheet PDF?
The official DG412EUE+ datasheet is available through the Analog Devices DG412 product page at https://www.analog.com/en/products/dg412.html. The page identifies the DG412 as an improved quad SPST analog switch and links to the manufacturer datasheet, which is Revision 7. Use the datasheet pin-description table, electrical characteristics, and recommended operating conditions when assigning pins and validating the finished circuit.
What is the DG412EUE+ pinout and package?
The DG412EUE+ is packaged in a 16-pin TSSOP and is intended for surface-mount assembly. The package contains four analog switches, four control inputs, analog terminals, power connections, and ground connections. Use the pin-description table in the Analog Devices DG412 datasheet, Revision 7, for exact pin numbering, because physical pin locations and the exposed connection assignments must be matched exactly during PCB layout.
What are the key specifications engineers should know about DG412EUE+?
The DG412EUE+ provides four SPST 1:1 analog-switch channels with 45-ohm nominal on resistance in a 16-pin TSSOP package. According to the Analog Devices DG412 datasheet, Revision 7, on-resistance matching is no more than 3 ohms and flatness across the signal range is no more than 4 ohms. The device supports bidirectional conduction and is specified for -40°C to +85°C operation.
What is the difference between DG412EUE+ and DG412CUE+?
The DG412EUE+ and DG412CUE+ are both listed as improved quad SPST analog switches in 16-pin TSSOP packages, with the DG412CUE+ identified as a 45-ohm part. The manufacturer datasheet should be used to confirm the ordering-code temperature, marking, and qualification differences before substitution. For a new PCB, DG412CUE+ is the closest documented same-package option identified by the cross-reference results.
Can DG412EUE+ replace DG412CUE+ in an existing design?
A DG412CUE+ can be considered for a DG412EUE+ position when both use the 16-pin TSSOP footprint and the electrical limits match the target application. The documented cross-reference identifies both as improved quad SPST, 45-ohm analog switches in 16-pin TSSOP packages. Before release, compare control logic, supply voltage, signal-range limits, temperature grade, lifecycle status, and package drawing from the manufacturer datasheet.
When should I choose the DG412EUE+ over another quad analog switch?
Choose the DG412EUE+ when the design needs four independent, normally open SPST paths, bidirectional signal routing, and a compact 16-pin TSSOP footprint. It is particularly useful where controlled channel matching and flatness are important because the manufacturer specifies on-resistance matching at 3 ohms maximum and flatness at 4 ohms maximum. The choice is less suitable where a multiplexer, lower-resistance FET switch, or different logic interface is required.
Is the DG412EUE+ suitable for precision test and measurement equipment?
The DG412EUE+ is suitable for many precision test and measurement routing applications because it offers four independently controlled SPST channels, 45-ohm nominal on resistance, and specified channel matching. The Analog Devices datasheet limits on-resistance matching to 3 ohms maximum, helping reduce path-to-path variation. Actual insertion loss, bandwidth, leakage, and switching transients must still be checked against the signal amplitude and frequency.
Where can I buy the DG412EUE+ online?
Use the Request a Quote form on this XAIPART page to request the DG412EUE+, current commercial terms, and the required quantity. The manufacturer lists the DG412 family in production, but quote approval, available quantity, and lead time should be confirmed for the exact 16-pin TSSOP ordering code. This form provides the current commercial response without relying on a static or potentially stale price table.
What is the price of the DG412EUE+?
The current commercial price for the DG412EUE+ is shown through the Request a Quote form on this XAIPART page after quantity and package requirements are entered. Pricing can depend on order quantity, market conditions, and production allocation, so a fixed figure can become inaccurate quickly. Use the quote form for a current, application-specific response for the exact DG412EUE+ ordering code.
What is the lead time for DG412EUE+?
Current lead time for the DG412EUE+ should be confirmed through the Request a Quote form on this XAIPART page. Analog Devices lists the DG412 family in production, which supports ongoing sourcing, but manufacturing capacity and order scheduling can still affect lead time. Include the requested quantity, tube packaging requirement, target date, and any qualification requirements with the quote request.
Is DG412EUE+ in stock?
Current DG412EUE+ inventory should be confirmed through the Request a Quote form on this XAIPART page. The manufacturer lists the DG412 family in production, while individual channel inventory can change with demand and allocated production. A quote response provides the appropriate confirmation for the exact ordering code and requested quantity rather than presenting a potentially outdated stock claim.
What is the best drop-in replacement for the DG412EUE+?
The best documented drop-in candidate found for the DG412EUE+ is the Analog Devices DG412CUE+, which is also an improved quad SPST, 45-ohm switch in a 16-pin TSSOP package. Confirm the exact pin assignments and electrical limits in the manufacturer datasheet before production use. Other cross-reference results used different packages or represented tape-and-reel packaging and therefore were not presented as additional drop-in alternatives.
What can replace the DG412EUE+?
The DG412CUE+ is a documented same-package replacement candidate for the DG412EUE+, because both are 16-pin TSSOP quad SPST analog switches with 45-ohm on resistance. The review must still cover logic levels, supply requirements, temperature grade, signal limits, switching behavior, and lifecycle status. A footprint match alone does not remove the need for application-level validation.
Is the DG412EUE+ the same as the DG412CUE+?
The DG412EUE+ and DG412CUE+ share the core DG412 function and the 16-pin TSSOP package, but ordering-code suffixes can identify different commercial, temperature, marking, or qualification configurations. The manufacturer datasheet should control that comparison. Treat the DG412CUE+ as a candidate replacement rather than declaring the devices identical until package drawings, temperature ratings, and electrical limits have been checked.
How should the DG412EUE+ be decoupled and laid out on a PCB?
Place the required supply-decoupling capacitor close to the device supply pins and connect it to a low-impedance ground plane. Route analog switch terminals directly to their sources or destinations, minimize loop area, and keep switching-control traces away from sensitive analog paths. The Analog Devices DG412 datasheet should be consulted for the exact pin assignments, supply limits, and application recommendations before routing the 16-pin TSSOP footprint.

Справочные инженерные данные для DG412EUE+ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the DG412EUE+ when the design requires four independently controlled, bidirectional SPST analog paths in a 16-pin TSSOP package and must accommodate a nominal 45-ohm on resistance. It is well suited to automated test equipment, instrumentation, sensor selection, and acquisition routing where the 3-ohm maximum matching and 4-ohm maximum flatness characteristics help control path-dependent errors. Consider the DG412CUE+ when it is available in the exact required ordering configuration, because it is documented as the same 16-pin TSSOP quad SPST architecture; confirm temperature, marking, qualification, and lifecycle details before substitution. Do not choose this device for applications requiring near-zero resistance, very high bandwidth, active multiplexing, or a control interface outside its rated supply and logic levels. If those requirements apply, specify a different switch or multiplexer rather than forcing a board-level substitution.

Сравнение с аналогами

Параметр Этот товар DG412CUE+
Brand Analog Devices Analog Devices
Package 16-TSSOP 16-TSSOP - same package
Number of Circuits 4 4
Switch Configuration Quad SPST, normally open Quad SPST, normally open
Multiplexer Configuration 1:1 1:1
Nominal On Resistance 45 ohm 45 ohm
Signal Conduction Bidirectional Bidirectional

Ключевые отличия

  • Four controlled analog paths in one compact package (против DG412CUE+)
  • Controlled resistance matching for multichannel measurements (против DG412CUE+)
  • Guaranteed flatness across the signal range (против DG412CUE+)

Заметки по проектированию

Place the required supply-decoupling capacitor directly beside the DG412EUE+ supply and ground pins, with a short return path into the ground plane. Route the four switched analog paths away from control-clock and digital-output traces to reduce coupling. Because the device uses a compact 16-pin TSSOP footprint, verify the manufacturer land pattern and pin assignments against the PCB library before releasing fabrication data.

Include the 45-ohm nominal switch resistance in the complete insertion-loss and source-impedance budget. On-resistance matching is specified at no more than 3 ohms, while flatness across the signal range is no more than 4 ohms; both contribute to channel-dependent error. Use short, symmetric routes, provide a continuous reference plane, and confirm leakage and allowable signal limits for the operating voltage and temperature.

Do not select the DG412EUE+ as though it were a zero-resistance or RF-optimized multiplexer. It is a four-channel SPST analog switch with 45-ohm nominal on resistance, and its control, supply, leakage, and signal-range constraints must be respected. Also avoid treating the DG412CUE+ as an automatic substitute until the ordering-code-specific temperature, qualification, and marking details have been compared.

Maintain comparable geometry for the four analog channels so that parasitic capacitance and inductance do not introduce more variation than the switch itself. Keep the exposed switched nodes away from unrelated high-impedance inputs, and place any downstream buffer close enough to minimize additional transmission-line effects. The same layout discipline is especially important because the datasheet limits on-resistance matching and flatness, but it does not eliminate PCB-induced differences.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The product listing references RoHS, but it does not state a definitive compliance result. Use the manufacturer product page or datasheet for current environmental, material, and qualification declarations.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

DG412EUE+ datasheet DG412EUE+ pinout DG412EUE+ datasheet pdf Analog Devices DG412EUE+ DG412EUE+ specifications DG412EUE+ 16-TSSOP DG412EUE+ application circuit DG412EUE+ vs DG412CUE+ DG412EUE+ replacement DG412EUE+ equivalent DG412EUE+ price DG412EUE+ stock 45 ohm quad SPST analog switch DG412EUE+ footprint

Связанные компоненты & термины

Analog Devices DG412EUE+ DG412CUE+ DG412EUE+T DG412 Maxim Integrated analog switch SPST switch multiplexer demultiplexer interface IC semiconductor bidirectional signal routing on resistance on-resistance matching on-resistance flatness signal isolation 16-pin TSSOP TSSOP package family surface-mount device SMD test equipment measurement instrumentation data acquisition sensor signal selection
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ