Analog Devices

DG442DY+T - 4-Channel SPST Analog Switch | Analog Devices

Артикул: DG442DY+T ✓ Активен
85 ohm Rds(on) 16-lead SOIC Package
MOQ: 1 |

DG442DY+T Обзор

Analog Devices DG442DY+T is a monolithic CMOS analog switch containing four independent single-pole single-throw (SPST) switches in a 16-lead narrow SOIC package. Each switch presents an 85 ohm on-resistance and is controlled by TTL- and CMOS-compatible digital inputs. The device is designed for routing analog signals in test equipment, instrumentation, communications, industrial control, and signal-conditioning systems.

An analog switch is an electrically controlled semiconductor device that connects or disconnects an analog signal path. The DG442 belongs to the analog-switch hierarchy, which also includes multiplexers, selectors, and matrix switches. Unlike a mechanical relay, it can change state rapidly without mechanical wear. Its four independent SPST channels provide separate signal paths while sharing common positive and negative supply rails.

The DG442DY+T uses TTL-compatible and CMOS-compatible control inputs, allowing its digital control signals to be driven by common microcontrollers, FPGA logic, comparators, and other digital controllers. Its 85 ohm on-resistance is suitable for many moderate-impedance instrumentation and test circuits. The 1:1 configuration means that each switched path presents one on-resistance rather than dividing a signal through a multiplexer network.

The Renesas DG441 and DG442 family datasheet identifies the DG442 as a CMOS analog switch with four independent SPST channels and a voltage reference for logic thresholds. These characteristics make the part appropriate when deterministic control logic and repeatable analog-path routing are required. The improved DG442 positioning is relevant when upgrading systems that used older DG201A and DG202-family switches.

Typical uses include multimeter and oscilloscope input routing, automated test equipment, data-acquisition modules, sample-and-hold circuits, battery-powered instruments, and industrial control systems. The device can route low-frequency baseband signals without the switching transients associated with electromechanical relays. Applications should still verify signal amplitude, bandwidth, charge injection, leakage, and power-supply limits against the manufacturer datasheet.

The DG442DY+T is supplied in a 16-lead SOIC measuring 3.9 mm by 9.9 mm by 1.55 mm. Place the device close to the controlled signal paths and keep analog traces short to minimize parasitic capacitance and pickup. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, and observe the stated supply sequencing and input-voltage limits before applying signals.

This product page combines package information, source-backed functional characteristics, same-footprint replacement options, comparison data, and practical PCB guidance. It helps engineers identify whether the four-channel SPST architecture matches the required signal-routing task before beginning a production design.

Аналоги без доработки для DG442DY+T — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

DG442DY-T1-E3

✅ Прямая замена
📦 16-SOIC
Same listed 4-channel SPST configuration and 85 ohm on-resistance in 16-SOIC; manufacturer and ordering suffix differ.

📋 Справочный аналог (нет в каталоге)

DG442DY-T

✅ Прямая замена
📦 16-SOIC
Same listed 4-channel SPST configuration and 85 ohm on-resistance in 16-SOIC; ordering suffix and manufacturer differ.

📋 Справочный аналог (нет в каталоге)

DG442DY-E3

✅ Прямая замена
📦 16-SOIC
Same DG442DY 16-SOIC family and four-channel SPST architecture; E3 suffix distinguishes the Vishay ordering configuration.

📋 Справочный аналог (нет в каталоге)

DG442DYZ

✅ Прямая замена
📦 16-SOIC
Same DG442 family, 16-SOIC footprint, and four SPST channels; Z ordering suffix differs from DG442DY+T.

📋 Справочный аналог (нет в каталоге)

DG442DYZ-T

✅ Прямая замена
📦 16-SOIC
Same listed DG442 16-SOIC architecture with four SPST channels; additional T ordering suffix differs from DG442DY+T.

📋 Справочный аналог (нет в каталоге)

DG442DY+T Максимальные параметры и электрические характеристики

Number of Switches 4 circuits
Switch Configuration 1:1
Switch Type Single-pole single-throw (SPST)
On-Resistance 85 ohm
Корпус 16-lead SOIC
Package Body Dimensions 3.9 mm x 9.9 mm x 1.55 mm
Lead Count 16 leads
Тип монтажа Surface mount
Digital Input Compatibility TTL and CMOS compatible
Logic Threshold Reference Internal voltage reference
Technology Monolithic CMOS

Руководство по цоколевке DG442DY+T в корпусе 3.9 mm x 9.9 mm x 1.55 mm

Цоколевка для DG442DY+T (корпус 3.9 mm x 9.9 mm x 1.55 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 3.9 mm x 9.9 mm x 1.55 mm для DG442DY+T

Нет подробных данных о распиновке для DG442DY+T.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

DG442DY+T подходит для 6 применениеs: Automated Test Equipment Signal Routing, Multimeter and Oscilloscope Input Multiplexing, Data Acquisition and Sensor Interface, Industrial Control Signal Switching, Sample-and-Hold Signal Selection, Battery-Powered Portable Instrumentation.

🖥️

Automated Test Equipment Signal Routing

The DG442DY+T is suitable for automated test equipment that must route four independent analog paths under digital control. Its four SPST channels provide one 85 ohm on-resistance per path, while TTL- and CMOS-compatible control inputs allow direct connection to a tester controller, FPGA, or microcontroller. Compared with mechanical relays, the monolithic CMOS implementation avoids mechanical contact wear and supports repeated signal-path changes. The design must still account for bandwidth, charge injection, off leakage, and supply limits specified in the manufacturer datasheet. Keep routed traces short, place bypass capacitance near the device, and verify that the switched signal amplitude remains within the supported range.

📺

Multimeter and Oscilloscope Input Multiplexing

The DG442DY+T can route multiple measurement inputs in a digital multimeter, oscilloscope, or mixed-signal tester. Four independent SPST switches allow a controller to connect and disconnect separate sensor or probe paths without using a mechanical relay for every transition. The 85 ohm on-resistance is relevant when the source impedance is low enough that the added path resistance does not dominate measurement accuracy. Logic-compatible controls simplify sequencing, although relay-like behavior must be validated for high-impedance sources. Check leakage, charge injection, switching time, and off-isolation in the datasheet, and keep the analog traces compact to minimize capacitive pickup.

🧩

Data Acquisition and Sensor Interface

The DG442DY+T fits data-acquisition front ends that require controlled selection among analog sensor signals. Four independent channels can connect source signals to a downstream amplifier or converter, while TTL- and CMOS-compatible inputs permit operation from common digital control logic. The 1:1 switch configuration presents a stated 85 ohm on-resistance without intentionally splitting the signal across multiple matched paths. Designers should compare that resistance with the sensor output impedance and acquisition input impedance. For high-impedance sensors, off leakage and charge injection can materially affect accuracy, so review those characteristics and use short, guarded routing in the PCB layout.

🏭

Industrial Control Signal Switching

The DG442DY+T can be used in industrial control systems to switch low-bandwidth analog command or feedback signals under microcontroller supervision. Its independent SPST channels support several control points without requiring a mechanical relay, and the TTL- or CMOS-compatible inputs simplify interfacing with industrial logic. The 85 ohm on-resistance must be considered alongside actuator-driver input impedance, sensor loading, and fault-current conditions. Verify supply tolerances, logic thresholds, operating temperature, and absolute maximum ratings for the installation environment. PCB placement should minimize long analog traces and keep switching currents away from precision reference and measurement paths.

⚡

Sample-and-Hold Signal Selection

The DG442DY+T is applicable to sample-and-hold and signal-selection circuits where several analog sources must be connected selectively. Four SPST switches permit independent channel control, while the monolithic CMOS implementation supports fast electronic path changes without relay bounce. The 85 ohm path resistance must be included in the acquisition network when calculating settling behavior and attenuation. Charge injection can create a voltage step when a switch changes state, and off leakage can disturb high-impedance storage capacitors, making those parameters essential selection criteria. Confirm the datasheet limits and keep the hold capacitor, switch, and subsequent buffer arranged to minimize parasitic capacitance and leakage.

📱

Battery-Powered Portable Instrumentation

The DG442DY+T can serve in portable, battery-powered instruments that switch low-frequency analog signals while avoiding the size and wear associated with mechanical relays. Four independent channels provide flexible routing in a compact 16-lead SOIC package measuring 3.9 mm by 9.9 mm by 1.55 mm. TTL- and CMOS-compatible controls allow operation across different logic systems. Before selection, calculate the effect of the 85 ohm on-resistance on source loading and review supply current, leakage, and switching behavior. Use a low-noise supply arrangement and place bypass components near the device, while keeping sensitive analog routing separate from digital control and return-current paths.

Сводка рекомендуемых товаров

DG442DY-T Same-family four-channel SPST switch candidate Используется в: Automated Test Equipment Signal Routing, Industrial Control Signal Switching, Battery-Powered Portable Instrumentation DG442DYZ Same-family SOIC switch candidate Используется в: Automated Test Equipment Signal Routing, Industrial Control Signal Switching DG442DY-T1-E3 Footprint-compatible analog switch candidate Используется в: Multimeter and Oscilloscope Input Multiplexing, Sample-and-Hold Signal Selection DG442DY-E3 Same-family Vishay ordering candidate Используется в: Multimeter and Oscilloscope Input Multiplexing, Battery-Powered Portable Instrumentation ADG713BRZ Functional equivalent listed for the DG442 family Используется в: Data Acquisition and Sensor Interface, Sample-and-Hold Signal Selection DG442DYZ-T Same-family 16-SOIC switch candidate Используется в: Data Acquisition and Sensor Interface
What is the DG442DY+T?
The DG442DY+T is a four-channel monolithic CMOS analog switch with independent SPST switches and an 85 ohm on-resistance. According to the Renesas DG441 and DG442 family datasheet, the DG442 provides four independent single-pole single-throw channels, TTL- and CMOS-compatible digital inputs, and an internal voltage reference for logic thresholds. The Analog Devices page identifies the DG442DY+T package as a 16-lead SOIC measuring 3.9 mm by 9.9 mm by 1.55 mm.
Where can I download the DG442DY+T datasheet PDF?
The official DG442 product and datasheet information is available from the Analog Devices DG442 product page. The page lists the DG442DY+T as a 16-lead SOIC and links to manufacturer documentation and package resources. Use the manufacturer datasheet for the complete pin-description table, electrical characteristics, recommended operating conditions, and package drawings before assigning PCB tracks or finalizing a production design.
Where can I find the DG442DY+T pinout?
The DG442DY+T pin assignments are published in the pin-description table of the DG441 and DG442 manufacturer datasheet. The device uses a 16-lead narrow SOIC package, but the numbered pin functions must be taken from the exact datasheet rather than inferred from a generic SOIC drawing. Review that table together with the application circuit when connecting the four analog terminals, four control inputs, and supply pins.
What are the key specifications of DG442DY+T that engineers should know?
The principal DG442DY+T specifications are four SPST switches, 85 ohm on-resistance, TTL- and CMOS-compatible control inputs, and a 16-lead narrow SOIC package. The manufacturer lists the package dimensions as 3.9 mm by 9.9 mm by 1.55 mm. According to the Renesas family datasheet, the device also includes a voltage reference for logic thresholds. Supply limits, switching time, leakage, and bandwidth should be confirmed in the datasheet.
DG442DY+T vs DG442DY-T1-E3 - which is better?
The DG442DY+T and DG442DY-T1-E3 both appear in the same 16-SOIC, four-channel SPST, 85 ohm switch category. The principal practical difference is the manufacturer and ordering suffix: DG442DY+T is associated with Analog Devices, while DG442DY-T1-E3 is listed by Vishay Siliconix. Compare the exact datasheets for supply range, switching time, logic levels, leakage, and lifecycle requirements before treating them as interchangeable.
What is the difference between DG442DY+T and DG442DYZ?
Both DG442DY+T and DG442DYZ are associated with the 16-SOIC DG442 family and are identified as complete package-and-terminal replacements in the comparison information. Their manufacturer organizations differ: DG442DY+T is listed under Analog Devices, while DG442DYZ is listed under Renesas Electronics. Because ordering suffixes can indicate qualification, temperature grade, or packaging, verify the electrical limits and marking requirements against the appropriate manufacturer datasheet.
When should I choose DG442DY+T over DG442DY-T?
Choose DG442DY+T when the Analog Devices DG442DY+T ordering configuration, documentation, and supply chain align with the design. DG442DY-T is another ordering designation in the same DG442 family and is listed with the same four-circuit, SPST, 85 ohm, 16-SOIC architecture. The decisive checks are the controlled electrical characteristics, operating-temperature grade, lifecycle status, and traceability required by the production program, rather than the abbreviated order code alone.
Is DG442DY+T suitable for instrumentation and test equipment?
The DG442DY+T is suitable for many instrumentation and test-equipment signal-routing tasks because it provides four independent SPST paths with an 85 ohm on-resistance and TTL- or CMOS-compatible control inputs. It can route signals without mechanical-relay wear and can be controlled by a microcontroller or FPGA. Suitability still depends on the required bandwidth, signal amplitude, noise behavior, switching time, and leakage, which must be checked in the manufacturer datasheet.
What is the best drop-in replacement for DG442DY+T?
The strongest drop-in candidate identified for DG442DY+T is DG442DY-T1-E3, which is listed as a four-circuit, 1:1, 85 ohm, 16-SOIC analog switch and is therefore package-compatible at the family level. Other close replacements include DG442DY-T, DG442DY-E3, DG442DYZ, and DG442DYZ-T. Before substitution, confirm the exact pinout, supply limits, logic thresholds, switching parameters, temperature grade, and lifecycle status.
Can DG442DY-T1-E3 replace DG442DY+T?
DG442DY-T1-E3 can be considered a footprint-compatible replacement candidate because it is listed with the same four-channel, 1:1, 85 ohm configuration in a 16-SOIC package. A production substitution still requires a detailed comparison of pin functions, absolute maximum ratings, supply voltage, logic levels, on-state resistance, switching time, leakage, and temperature range. The presence of a matching package alone does not establish full electrical equivalence.
What is the best Vishay equivalent for DG442DY+T?
DG442DY-T1-E3 is the clearest Vishay Siliconix candidate because the manufacturer listing describes four circuits, a 1:1 configuration, 85 ohm resistance, and a 16-SOIC package matching the DG442DY+T. The exact Vishay datasheet should be used to verify every terminal function and electrical limit before substitution. Request a quote through the Request a Quote form on this page for current availability and lead-time information.
Is DG442DY+T the same as ADG713BRZ?
ADG713BRZ is identified as a functional equivalent to DG442DY+T, but functional equivalence does not automatically mean pin-to-pin interchangeability. The DG442DY+T uses a 16-lead SOIC and implements four independent SPST switches, while the ADG713BRZ electrical and terminal details must be checked separately. Use the ADG713BRZ datasheet to compare channel count, pinout, on-resistance, supply range, logic levels, and switching behavior before deciding on a board-level replacement.
How do I design the PCB layout for DG442DY+T?
Place the DG442DY+T close to the analog signals it routes and keep input, output, and control traces short to reduce parasitic capacitance and signal pickup. Follow the exact pin-description table in the manufacturer datasheet and preserve the component orientation defined by the package drawing. Provide stable supply bypassing and route return currents carefully, especially when the switched signals have large amplitude or high source impedance.
Where can I buy DG442DY+T and check its stock and lead time?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for DG442DY+T. The device is a standard catalog part with a 16-lead SOIC package, but inventory and delivery schedules can change independently of technical documentation. Include your target quantity, date code requirement, shipment destination, and packaging preference in the request.
What is the price of DG442DY+T?
Current commercial pricing for DG442DY+T is handled through the Request a Quote form on this page rather than through a static price statement. Submit the required quantity, packaging preference, delivery destination, and target date so the current supply position can be evaluated. This approach also lets procurement distinguish a single-unit evaluation order from production quantities without relying on stale distributor pricing.
What is the lead time for DG442DY+T?
The current lead time for DG442DY+T should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, factory inventory, scheduled production, packaging, and destination, so it cannot be established reliably from a generic product listing. Include the required delivery date and acceptable quantity in the quote request to obtain a schedule suitable for the assembly plan.
Is DG442DY+T compliant with RoHS and REACH?
The RoHS and REACH status of DG442DY+T should be confirmed from the current manufacturer product page and material declaration resources. The Analog Devices DG442 product page provides material declaration and reliability-report resources for the listed package variants. Use those documents for the specific DG442DY+T ordering code when compliance documentation is required for procurement or product qualification.

Справочные инженерные данные для DG442DY+T — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose DG442DY+T when the design needs four independent SPST analog paths, an 85 ohm on-resistance, and a 16-lead SOIC footprint controlled by TTL- or CMOS-compatible logic. It is well suited to instrumentation, automated test equipment, data-acquisition modules, and industrial control paths where a mechanical relay would add wear or inconsistency. DG442DY-T1-E3 is the leading footprint-compatible replacement candidate because its listing explicitly matches the four-channel, 1:1, 85 ohm, 16-SOIC configuration. DG442DY-T and DG442DYZ are appropriate family alternatives when their manufacturer-specific documentation and lifecycle requirements suit the program. ADG713BRZ is listed as a functional equivalent, but it should be selected only after its exact pinout and electrical characteristics confirm board-level compatibility. For every alternative, verify supply range, logic thresholds, switching time, leakage, charge injection, absolute maximum ratings, and operating-temperature grade against the exact manufacturer datasheet.

Сравнение с аналогами

Параметр Этот товар DG442DY-T1-E3 DG442DY-T DG442DY-E3 DG442DYZ DG442DYZ-T
Brand Analog Devices Vishay Intertechnology Renesas Electronics Vishay Intertechnology Renesas Electronics Renesas Electronics
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Number of Circuits 4 4 4 4 4 4
Switch Type Independent SPST SPST SPST SPST SPST SPST
Digital Input Compatibility TTL and CMOS compatible TTL and CMOS compatible TTL and CMOS compatible TTL and CMOS compatible TTL and CMOS compatible TTL and CMOS compatible

Ключевые отличия

  • Compact four-channel integration (против ADG713BRZ)
  • Directly documented 85 ohm path resistance (против DG442DYZ)
  • No mechanical contact wear (против DG442DY-T)
  • Common digital-control compatibility (против DG442DY-E3)

Заметки по проектированию

Place the DG442DY+T adjacent to the signal sources and destinations it switches. Short analog traces reduce parasitic capacitance, coupling, and input bias errors, which become more important when the source impedance is high. Use the exact pin-description table in the manufacturer datasheet when assigning tracks, preserve the package orientation, and route each switched channel away from unrelated digital clocks and switching-current return paths.

Validate the complete switched path rather than only its 85 ohm on-resistance. Check source impedance, downstream input capacitance, bandwidth, off leakage, charge injection, and off-isolation in the manufacturer datasheet. For high-impedance nodes, leakage and injected charge can be more important than DC resistance. Add a buffer near a sensitive capacitor or measurement input when the application cannot tolerate switching transients.

Use the supply voltages and logic thresholds specified in the DG441/DG442 family datasheet. TTL- and CMOS-compatible control inputs simplify interfacing, but they do not remove the need to confirm input levels, supply sequencing, and absolute maximum ratings. Place bypass capacitors close to the supply pins and keep their return paths compact so switching currents do not disturb sensitive analog references in the same board.

Do not treat a matching SOIC-16 footprint as proof of complete interchangeability. Confirm pin functions, supply range, absolute maximum ratings, switching time, on-resistance, leakage, temperature grade, and lifecycle status for every proposed replacement. Apply the exact manufacturer datasheet associated with the replacement ordering code and validate it at the system extremes before releasing production artwork.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The Analog Devices product page provides material declaration and reliability-report resources, but explicit DG442DY+T RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not included in the retrieved information.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

DG442DY+T datasheet DG442DY+T pinout DG442DY+T datasheet pdf DG442DY+T equivalent DG442DY+T replacement DG442DY+T vs DG442DY-T1-E3 DG442DY+T price DG442DY+T stock Analog Devices DG442DY+T DG442DY+T 16-SOIC analog switch DG442DY+T SPST switch DG442DY+T test equipment

Связанные компоненты & термины

Analog Devices DG442DY+T DG442 DG442DY-T1-E3 DG442DY-T DG442DY-E3 DG442DYZ DG442DYZ-T ADG713BRZ Vishay Intertechnology Renesas Electronics SPST analog switch monolithic CMOS analog switch analog switch interface IC TTL-compatible control CMOS-compatible control on-resistance charge injection off leakage logic-threshold voltage reference 16-SOIC package SOIC narrow package surface-mount package test and measurement
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ