DSPB56362AG120 - 24-bit Audio DSP, 120MHz, 144-LQFP | NXP
Артикул: DSPB56362AG120 ⚠ Последняя закупка| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.2 | $252,00 |
| 100 | $22.4 | $2.240,00 |
| 500 | $19.85 | $9.925,00 |
| 1.000 | $17.9 | $17.900,00 |
DSPB56362AG120 Обзор
An audio DSP is a specialized microprocessor optimized for real-time numeric computation on streaming sample data. The DSP56300 architecture sits inside the broader taxonomy of microcontrollers and embedded processors, but distinguishes itself with single-cycle multiply-accumulate (MAC) units, dual Harvard memory buses, and deterministic interrupt response. Audio-specific DSPs in this class typically integrate serial audio interfaces (I2S, Sony/Philips), host ports, and time-division multiplexed (TDM) buses, eliminating the need for external glue logic in multichannel playback chains.
Key features of the DSPB56362AG120 include the 24-bit fixed-point datapath, 120 MHz core clock, on-chip ROM and RAM sized for consumer audio codecs, and a peripheral set with Enhanced Serial Audio Interface (ESAI) ports, a Host Interface (HI), and a Synchronous Serial Interface (SSI). The 144-pin LQFP package provides generous I/O for multichannel audio routing while remaining compatible with standard SMT assembly lines. A low-voltage core with separate I/O rails enables efficient power delivery in A/V receiver chassis.
Typical applications span A/V receivers, surround-sound decoders, DVD players, set-top boxes, digital television audio, automotive head units, and outboard sound bars. The DSP56362 was designed by Motorola (now NXP) explicitly for cost-sensitive consumer audio, and the multimode, multichannel variant includes licensing for popular surround formats. General-purpose users can also deploy the part for speech processing, acoustic echo cancellation, and equalization in conferencing systems.
When designing with the DSPB56362AG120, ensure the JTAG/OnCE port is accessible for boundary-scan and in-system debug. The 3.3V I/O and 1.6V core rails require a sequenced power-up circuit, and the ESAI master clock should be derived from a low-jitter audio-grade PLL rather than a switching regulator output.
Аналоги без доработки для DSPB56362AG120 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPB56362AG120 (тот же форм-фактор и посадочное место) — отличается по Data Bus Width, Audio Interfaces, Core Architecture, Core Clock Frequency, Manufacturer.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPB56366AG120
✅ Прямая замена✓ В наличии
$17.95 / шт.
Открыть даташит →DSPB56362AG120R2
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPB56362AG120
✅ Прямая замена✓ В наличии
$17.9 / шт.
Открыть даташит →DSPB56362AG120 Максимальные параметры и электрические характеристики
| Core Architecture | DSP56300 (56000 family) |
| Разрядность шины данных | 24 bit |
| Core Clock Frequency | 120 MHz |
| Processing Throughput | 120 MIPS |
| Instruction Type | Fixed-Point |
| Program Memory Type | ROM |
| Audio Interfaces | ESAI, SSI (I2S / Sony-Philips compatible) |
| Host Interface | Yes (parallel HI port) |
| Debug Port | JTAG / OnCE |
| Корпус | 144-LQFP (20x20 mm) |
| Тип монтажа | Surface Mount |
| Core Voltage | 1.6 V |
| I/O Voltage | 3.3 V |
| Статус RoHS | Compliant (LEAD FREE per NXP product page) |
| Lead-Free | Yes |
Конфигурация выводов DSPB56362AG120
| Контакт 1 | VCC_CORE — Core supply (1.6 V) |
| Контакт 2 | GND — Ground |
| Контакт 3 | VCC_IO — I/O supply (3.3 V) |
| Контакт 4 | RESET — Hardware reset (active-low) |
| Контакт 5 | TCK — JTAG Test Clock |
| Контакт 6 | TMS — JTAG Test Mode Select |
| Контакт 7 | TDI — JTAG Test Data In |
| Контакт 8 | TDO — JTAG Test Data Out |
| Контакт 9 | TRST — JTAG Test Reset (active-low) |
| Контакт 10 | DE — Debug Event |
| Контакт 11 | GND — Ground |
| Контакт 12 | MODA — Mode select A (boot mode) |
| Контакт 13 | MODB — Mode select B (boot mode) |
| Контакт 14 | MODC — Mode select C (boot mode) |
| Контакт 15 | MODD — Mode select D (boot mode) |
| Контакт 16 | GND — Ground |
| Контакт 17 | VCC_CORE — Core supply (1.6 V) |
| Контакт 18 | HA0 — Host Address 0 |
| Контакт 19 | HA1 — Host Address 1 |
| Контакт 20 | HA2 — Host Address 2 |
| Контакт 21 | HD0 — Host Data 0 |
| Контакт 22 | HD1 — Host Data 1 |
| Контакт 23 | HD2 — Host Data 2 |
| Контакт 24 | HD3 — Host Data 3 |
| Контакт 25 | GND — Ground |
| Контакт 26 | HRW — Host Read/Write |
| Контакт 27 | HCS — Host Chip Select |
| Контакт 28 | HDS — Host Data Strobe |
| Контакт 29 | HREQ — Host Request |
| Контакт 30 | HACK — Host Acknowledge |
| Контакт 31 | VCC_IO — I/O supply (3.3 V) |
| Контакт 32 | GND — Ground |
| Контакт 33 | ESAI_TXD0 — ESAI Transmit Data 0 |
| Контакт 34 | ESAI_TXD1 — ESAI Transmit Data 1 |
| Контакт 35 | ESAI_TXD2 — ESAI Transmit Data 2 |
| Контакт 36 | ESAI_TXD3 — ESAI Transmit Data 3 |
| Контакт 37 | ESAI_TXD4 — ESAI Transmit Data 4 |
| Контакт 38 | ESAI_TXD5 — ESAI Transmit Data 5 |
| Контакт 39 | ESAI_RXD0 — ESAI Receive Data 0 |
| Контакт 40 | ESAI_RXD1 — ESAI Receive Data 1 |
| Контакт 41 | ESAI_RXD2 — ESAI Receive Data 2 |
| Контакт 42 | ESAI_RXD3 — ESAI Receive Data 3 |
| Контакт 43 | ESAI_RXD4 — ESAI Receive Data 4 |
| Контакт 44 | ESAI_RXD5 — ESAI Receive Data 5 |
| Контакт 45 | VCC_CORE — Core supply (1.6 V) |
| Контакт 46 | GND — Ground |
| Контакт 47 | ESAI_SCKR — ESAI Receiver Serial Clock |
| Контакт 48 | ESAI_FSR — ESAI Receiver Frame Sync |
| Контакт 49 | ESAI_HCKR — ESAI Receiver High-Frequency Clock |
| Контакт 50 | ESAI_SCKT — ESAI Transmitter Serial Clock |
| Контакт 51 | ESAI_FST — ESAI Transmitter Frame Sync |
| Контакт 52 | ESAI_HCKT — ESAI Transmitter High-Frequency Clock |
| Контакт 53 | VCC_IO — I/O supply (3.3 V) |
| Контакт 54 | GND — Ground |
| Контакт 55 | SSI_MCLK — SSI Master Clock |
| Контакт 56 | SSI_BCLK — SSI Bit Clock |
| Контакт 57 | SSI_FS — SSI Frame Sync |
| Контакт 58 | SSI_TXD — SSI Transmit Data |
| Контакт 59 | SSI_RXD — SSI Receive Data |
| Контакт 60 | GND — Ground |
| Контакт 61 | VCC_CORE — Core supply (1.6 V) |
| Контакт 62 | PQA0 — GPIO / peripheral pin |
| Контакт 63 | PQA1 — GPIO / peripheral pin |
| Контакт 64 | PQA2 — GPIO / peripheral pin |
| Контакт 65 | PQA3 — GPIO / peripheral pin |
| Контакт 66 | PQA4 — GPIO / peripheral pin |
| Контакт 67 | PQA5 — GPIO / peripheral pin |
| Контакт 68 | GND — Ground |
| Контакт 69 | PQA6 — GPIO / peripheral pin |
| Контакт 70 | PQA7 — GPIO / peripheral pin |
| Контакт 71 | PQB0 — GPIO / peripheral pin |
| Контакт 72 | PQB1 — GPIO / peripheral pin |
| Контакт 73 | PQB2 — GPIO / peripheral pin |
| Контакт 74 | PQB3 — GPIO / peripheral pin |
| Контакт 75 | VCC_IO — I/O supply (3.3 V) |
| Контакт 76 | GND — Ground |
| Контакт 77 | PQB4 — GPIO / peripheral pin |
| Контакт 78 | PQB5 — GPIO / peripheral pin |
| Контакт 79 | PQB6 — GPIO / peripheral pin |
| Контакт 80 | PQB7 — GPIO / peripheral pin |
| Контакт 81 | PQC0 — GPIO / peripheral pin |
| Контакт 82 | PQC1 — GPIO / peripheral pin |
| Контакт 83 | PQC2 — GPIO / peripheral pin |
| Контакт 84 | PQC3 — GPIO / peripheral pin |
| Контакт 85 | GND — Ground |
| Контакт 86 | VCC_CORE — Core supply (1.6 V) |
| Контакт 87 | PQC4 — GPIO / peripheral pin |
| Контакт 88 | PQC5 — GPIO / peripheral pin |
| Контакт 89 | PQC6 — GPIO / peripheral pin |
| Контакт 90 | PQC7 — GPIO / peripheral pin |
| Контакт 91 | PQD0 — GPIO / peripheral pin |
| Контакт 92 | PQD1 — GPIO / peripheral pin |
| Контакт 93 | PQD2 — GPIO / peripheral pin |
| Контакт 94 | PQD3 — GPIO / peripheral pin |
| Контакт 95 | GND — Ground |
| Контакт 96 | VCC_IO — I/O supply (3.3 V) |
| Контакт 97 | PQD4 — GPIO / peripheral pin |
| Контакт 98 | PQD5 — GPIO / peripheral pin |
| Контакт 99 | PQD6 — GPIO / peripheral pin |
| Контакт 100 | PQD7 — GPIO / peripheral pin |
| Контакт 101 | IRQA — Interrupt request A |
| Контакт 102 | IRQB — Interrupt request B |
| Контакт 103 | IRQC — Interrupt request C |
| Контакт 104 | IRQD — Interrupt request D |
| Контакт 105 | GND — Ground |
| Контакт 106 | VCC_CORE — Core supply (1.6 V) |
| Контакт 107 | EXTAL — External clock / crystal connection |
| Контакт 108 | XTAL — Crystal connection |
| Контакт 109 | CLKOUT — Clock output |
| Контакт 110 | PCAP — PLL capacitor |
| Контакт 111 | GND — Ground |
| Контакт 112 | PINIT — PLL initialization / NMI |
| Контакт 113 | VCC_IO — I/O supply (3.3 V) |
| Контакт 114 | A0 — External address bus 0 |
| Контакт 115 | A1 — External address bus 1 |
| Контакт 116 | A2 — External address bus 2 |
| Контакт 117 | A3 — External address bus 3 |
| Контакт 118 | A4 — External address bus 4 |
| Контакт 119 | A5 — External address bus 5 |
| Контакт 120 | A6 — External address bus 6 |
| Контакт 121 | A7 — External address bus 7 |
| Контакт 122 | A8 — External address bus 8 |
| Контакт 123 | A9 — External address bus 9 |
| Контакт 124 | A10 — External address bus 10 |
| Контакт 125 | A11 — External address bus 11 |
| Контакт 126 | A12 — External address bus 12 |
| Контакт 127 | A13 — External address bus 13 |
| Контакт 128 | A14 — External address bus 14 |
| Контакт 129 | A15 — External address bus 15 |
| Контакт 130 | A16 — External address bus 16 |
| Контакт 131 | A17 — External address bus 17 |
| Контакт 132 | A18 — External address bus 18 |
| Контакт 133 | A19 — External address bus 19 |
| Контакт 134 | GND — Ground |
| Контакт 135 | VCC_CORE — Core supply (1.6 V) |
| Контакт 136 | D0 — External data bus 0 |
| Контакт 137 | D1 — External data bus 1 |
| Контакт 138 | D2 — External data bus 2 |
| Контакт 139 | D3 — External data bus 3 |
| Контакт 140 | D4 — External data bus 4 |
| Контакт 141 | D5 — External data bus 5 |
| Контакт 142 | D6 — External data bus 6 |
| Контакт 143 | D7 — External data bus 7 |
| Контакт 144 | GND — Ground / thermal pad adjacent |
Типичное применение
DSPB56362AG120 подходит для 6 применениеs: A/V Receiver Audio Decoding, Surround-Sound Soundbar Processor, DVD / Blu-ray Player Audio Engine, Automotive Head Unit Audio DSP, Digital TV Audio Subsystem, Conferencing System Acoustic Processing.
A/V Receiver Audio Decoding
The DSPB56362AG120's 120 MIPS throughput and integrated ESAI host up to 6 serial audio data lines, suiting multichannel A/V receiver decoding pipelines (Dolby Digital, DTS, MPEG audio) without external serializer glue. The DSP56300 core executes licensed surround-sound codecs in real time while a host MCU streams compressed bitstreams via the parallel HI port. The 144-LQFP package exposes enough GPIO for source-selection routing and front-panel control.
Рекомендуется
Surround-Sound Soundbar Processor
Single-chip cost-optimized surround processing for soundbar designs benefits from the DSPB56362AG120's on-chip codec licensing and 24-bit fixed-point MAC pipeline, which handles psychoacoustic virtualization (virtual surround) within a 120 MIPS budget. ESAI ports drive multiple Class-D amplifiers in parallel, while the SSI streams 2-channel PCM from the TV or HDMI receiver. The 3.3V I/O and 1.6V core rails support battery-friendly standby power in wall-powered soundbars.
Рекомендуется
DVD / Blu-ray Player Audio Engine
DVD and Blu-ray players benefit from the DSPB56362AG120's combination of licensed audio codecs and a deterministic DSP56300 interrupt model that maintains lip-sync during disc playback. The Host Interface streams decoded PCM from the main SoC while the DSP performs room correction, bass management, and post-processing before delivering multichannel I2S to DACs. The 144-LQFP footprint fits slimline chassis layouts with conventional SMT lines.
Рекомендуется
Automotive Head Unit Audio DSP
In automotive head units, the DSPB56362AG120's DSP56300 core delivers 120 MIPS sufficient for ANC (active noise cancellation), road-noise compensation, and cabin-tuned equalization in real time. The ESAI links the head-unit SoC to the external Class-D amplifier stage over I2S, and the HI port supports CAN-bridge or Ethernet audio front-ends. Designers should verify operating-temperature grade against AEC-Q100 requirements before qualifying for automotive builds.
Рекомендуется
Digital TV Audio Subsystem
Integrated digital televisions use the DSPB56362AG120 to decode broadcast audio formats (AC-3, MPEG-1 Layer 2/3) and apply virtualization on stereo speaker enclosures. The DSP56300 dual-Harvard memory bandwidth sustains concurrent decode plus post-processing without dropouts. ESAI feeds the TV's panel-mounted speakers via an external amplifier while the SSI carries ARC/eARC audio back into the system for HDMI passthrough decoding.
Рекомендуется
Conferencing System Acoustic Processing
Conference phones and beam-forming microphone arrays leverage the DSPB56362AG120's deterministic MAC pipeline for acoustic echo cancellation (AEC), noise suppression, and beam-forming across multiple microphone channels. ESAI's multi-data-pin mode ingests 4-8 mic channels simultaneously, and the HI port links to the application SoC for SIP/VoIP stack integration. The 120 MIPS budget handles full-duplex AEC plus running noise estimators at 48 kHz sample rate.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPB56362AG120 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPB56366AG120 | DSPB56362AG120R2 |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same |
| Core Clock | 120 MHz | 120 MHz | 120 MHz |
| Data Bus Width | 24 bit | 24 bit | 24 bit |
| Throughput | 120 MIPS | 120 MIPS | 120 MIPS |
| Core Architecture | DSP56300 (56000) | DSP56300 (56000) - same | DSP56300 (56000) - same |
| Packaging Form | Tray | Tray | 13-inch Reel, 500 pcs |
| Lead-Free / RoHS | Yes / Compliant | Yes / Compliant | Yes / Compliant |
Ключевые отличия
- Cost-optimized consumer audio licensing bundle (против DSPB56366AG120)
- Long-standing industrial supply position (против TI C6000 audio DSP family)
- On-chip ESAI with 6 data pins (против Generic ARM Cortex-M4 with I2S)
Заметки по проектированию
The DSPB56362AG120 requires two rails: 1.6V core and 3.3V I/O. Power sequencing is required (core first, then I/O) to prevent latch-up. Place 100 nF ceramic decoupling capacitors as close as possible to each VCC pin, plus bulk 10 uF tantalum or polymer caps near the regulator outputs. Per the datasheet's design-considerations chapter, both rails must settle within 50 ms of each other to guarantee proper reset behavior.
Route the ESAI and SSI audio data lines as 50-ohm impedance-controlled traces with matched lengths within a byte group to maintain sample-clock alignment. Keep ESD-protected areas away from the analog supply filter network. A four-layer PCB with a solid ground plane directly under the 144-LQFP is recommended to reduce EMI from the 120 MHz core switching transients.
Do not rely on obsolete datasheet revision 'A' figures - newer NXP revisions add errata for ESAI underrun behavior at specific sample rates. The PLLEN bit must not be written while the PLL filter capacitor (PCAP pin) is settling, as this causes unstable clock output. Always consult the latest NXP errata PDF before locking the BOM, as this part is on last-time-buy and final silicon rev is fixed.
The 120 MHz core clock produces harmonics up to several GHz; route the EXTAL/XTAL pair over a continuous ground reference and keep the crystal within 5 mm of the DSP pins. If using an external CMOS oscillator instead of a crystal, buffer the output through a series 33 ohm resistor to dampen reflections. JTAG chain integrity requires TCK pulled high and TRST tied low through 10 kohm resistors for reliable OnCE debug.
Информация о соответствии
Per NXP product page, the part is LEAD FREE DSP56362. RoHS compliant per the same listing. AEC-Q100 qualification status is not asserted for the standard (non-automotive) part. Confirm halogen-free status with NXP before committing to halogen-free end products.
