DSPIC30F5011T-30I/PT - 16-bit DSC, 30 MIPS, 66KB Flash | Microchip
Артикул: DSPIC30F5011T-30I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.12 | $9,12 |
| 10 | $8.21 | $82,10 |
| 100 | $7.18 | $718,00 |
| 500 | $6.4 | $3.200,00 |
| 1.000 | $5.72 | $5.720,00 |
DSPIC30F5011T-30I/PT Обзор
What is a Digital Signal Controller? A DSC is a hybrid between a microcontroller (MCU) and a Digital Signal Processor (DSP). The MCU side provides deterministic interrupt response and rich peripherals (timers, UART, SPI, I2C, CAN), while the DSP side adds a single-cycle MAC unit, barrel shifter, and dual 40-bit accumulators so that the core can execute FIR/IIR filters, FFTs, and PID loops in real time. In the system hierarchy, the DSC sits between a generic MCU and a standalone DSP, giving designers a single-chip solution for closed-loop motor control, audio processing, and power conversion that previously required a controller + DSP pair.
Key features of the DSPIC30F5011 include a 30 MIPS modified Harvard core, hardware multiply-accumulate for single-cycle DSP operations, a 12-bit 200 ksps ADC with up to 16 channels, motor-control PWM with dedicated fault inputs, and CAN/UART/SPI/I2C communication peripherals. It supports 2.5 V to 5.5 V operation across an industrial -40 C to +85 C temperature range, and includes JTAG/ICSP for in-circuit debug.
The architecture uses a 16-bit modified Harvard core with separate program and data buses, plus a DSP engine that lets C-compiler-generated code reach near-assembly efficiency on filter math. A 30 MIPS instruction throughput gives the headroom to run 10 kHz+ control loops while leaving CPU time for housekeeping.
Typical applications include BLDC and PMSM motor control (sensored or sensorless), three-phase UPS and power inverter control, audio processing and active noise cancellation, sensor signal conditioning, and industrial automation PLC modules. The integrated motor-control PWM and 12-bit ADC make it a single-chip solution for FOC and trapezoidal commutation.
When designing with this part, allocate the 52 GPIO pins across analog inputs, PWM outputs, encoder feedback, and communications. Use the DSP engine for math-heavy loops and reserve the main CPU for state machines and communication stacks. Plan the PCB layout so the analog AVSS/AVDD pair is decoupled separately from the digital supply and routed on a quiet ground island.
This page consolidates distributor pricing, same-package drop-in alternatives from the Microchip dsPIC30 family, and PCB-level design notes that are not duplicated in the manufacturer datasheet.
Аналоги без доработки для DSPIC30F5011T-30I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPIC30F5011T-30I/PT (тот же форм-фактор и посадочное место) — отличается по ADC, Communication Peripherals, Core Architecture, DSP Engine, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPIC30F5011-30I/PT
✅ Прямая замена✓ В наличии
$7.4 / шт.
Открыть даташит →DSPIC30F5013-30I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC30F5011T-30I/PTVAO
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC30F5011T-30I/PTG
✅ Прямая замена✓ В наличии
$8.05 / шт.
Открыть даташит →DSPIC30F501130IP
✅ Прямая замена✓ В наличии
$7.95 / шт.
Открыть даташит →DSPIC30F5011T-30I/PT Максимальные параметры и электрические характеристики
| Core Architecture | 16-bit dsPIC30F modified Harvard |
| Instruction Throughput | 30 MIPS |
| Program Memory (Flash) | 66 KB (22K x 24 words) |
| Data SRAM | 4 KB |
| Data EEPROM | 1 KB |
| Напряжение питания | 2.5 V to 5.5 V |
| I/O Pins | 52 |
| ADC | 12-bit, 16 channels, 200 ksps |
| Корпус | 64-pin TQFP (10x10 mm, PT) |
| Рабочая температура | -40 C to +85 C (Industrial) |
| DSP Engine | Single-cycle MAC, dual 40-bit accumulators |
| Communication Peripherals | CAN, UART, SPI, I2C |
| Motor Control PWM | Yes, with dedicated fault inputs |
| Тип монтажа | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
| Статус RoHS | Compliant |
Конфигурация выводов DSPIC30F5011T-30I/PT
| Контакт 1 | OSC1 — Crystal oscillator input |
| Контакт 2 | OSC2 — Crystal oscillator output |
| Контакт 3 | MCLR — Master Clear / reset input |
| Контакт 4 | PGEC1 — ICSP programming clock |
| Контакт 5 | PGED1 — ICSP programming data |
| Контакт 6 | VSS — Digital ground |
| Контакт 7 | VDD — Digital supply |
| Контакт 8 | RB0 — GPIO RB0 / analog AN0 |
| Контакт 9 | RB1 — GPIO RB1 / analog AN1 |
| Контакт 10 | RB2 — GPIO RB2 / analog AN2 |
| Контакт 11 | RB3 — GPIO RB3 / analog AN3 |
| Контакт 12 | RB4 — GPIO RB4 / analog AN4 |
| Контакт 13 | RB5 — GPIO RB5 / analog AN5 |
| Контакт 14 | RB6 — GPIO RB6 / analog AN6 |
| Контакт 15 | RB7 — GPIO RB7 / analog AN7 |
| Контакт 16 | AVDD — Analog supply |
| Контакт 17 | AVSS — Analog ground |
| Контакт 18 | RC1 — GPIO RC1 / analog AN8 |
| Контакт 19 | RC2 — GPIO RC2 / analog AN9 |
| Контакт 20 | RC3 — GPIO RC3 / analog AN10 |
| Контакт 21 | RC4 — GPIO RC4 / analog AN11 |
| Контакт 22 | RD0 — GPIO RD0 |
| Контакт 23 | RD1 — GPIO RD1 |
| Контакт 24 | RD2 — GPIO RD2 |
| Контакт 25 | RD3 — GPIO RD3 |
| Контакт 26 | RD4 — GPIO RD4 |
| Контакт 27 | RD5 — GPIO RD5 |
| Контакт 28 | RD6 — GPIO RD6 |
| Контакт 29 | RD7 — GPIO RD7 |
| Контакт 30 | VDD — Digital supply |
| Контакт 31 | VSS — Digital ground |
| Контакт 32 | RF0 — GPIO RF0 |
| Контакт 33 | RF1 — GPIO RF1 |
| Контакт 34 | RF2 — GPIO RF2 |
| Контакт 35 | RF3 — GPIO RF3 |
| Контакт 36 | RF4 — GPIO RF4 |
| Контакт 37 | RF5 — GPIO RF5 |
| Контакт 38 | RF6 — GPIO RF6 |
| Контакт 39 | RF7 — GPIO RF7 |
| Контакт 40 | RG0 — GPIO RG0 |
| Контакт 41 | RG1 — GPIO RG1 |
| Контакт 42 | RG2 — GPIO RG2 |
| Контакт 43 | RG3 — GPIO RG3 |
| Контакт 44 | RE0 — GPIO RE0 |
| Контакт 45 | RE1 — GPIO RE1 |
| Контакт 46 | RE2 — GPIO RE2 |
| Контакт 47 | RE3 — GPIO RE3 |
| Контакт 48 | RE4 — GPIO RE4 |
| Контакт 49 | RE5 — GPIO RE5 |
| Контакт 50 | RE6 — GPIO RE6 |
| Контакт 51 | RE7 — GPIO RE7 |
| Контакт 52 | RA0 — GPIO RA0 / analog AN12 |
| Контакт 53 | RA1 — GPIO RA1 / analog AN13 |
| Контакт 54 | RA2 — GPIO RA2 / analog AN14 |
| Контакт 55 | RA3 — GPIO RA3 / analog AN15 |
| Контакт 56 | RA4 — GPIO RA4 |
| Контакт 57 | RA5 — GPIO RA5 |
| Контакт 58 | RA6 — GPIO RA6 |
| Контакт 59 | RA7 — GPIO RA7 |
| Контакт 60 | VDD — Digital supply |
| Контакт 61 | VSS — Digital ground |
| Контакт 62 | RC0 — GPIO RC0 |
| Контакт 63 | RC13 — GPIO RC13 |
| Контакт 64 | RC14 — GPIO RC14 |
Типичное применение
DSPIC30F5011T-30I/PT подходит для 6 применениеs: BLDC / PMSM Motor Control, Three-Phase Power Inverter and UPS, Industrial Sensor Signal Conditioning, Audio Processing and Active Noise Cancellation, Automotive Body and Sensor Modules, Industrial Automation PLC Modules.
BLDC / PMSM Motor Control
The DSPIC30F5011's Motor-Control PWM with dedicated fault inputs and 12-bit 200 ksps ADC enables single-chip Field-Oriented Control of three-phase BLDC and PMSM motors. The DSP engine executes Park/Clarke transforms and PI loops in single-cycle MAC, leaving CPU bandwidth for CAN/UART comms. QEI inputs accept incremental encoder feedback; analog inputs AN0-AN15 read phase currents via op-amp networks. With 30 MIPS and 4 KB RAM, control loop rates above 20 kHz are practical.
Рекомендуется
Three-Phase Power Inverter and UPS
For solar inverters, UPS stages, and three-phase PFC, the DSPIC30F5011 supplies dedicated PWM with programmable dead-time and analog comparators for cycle-by-cycle current limiting. The 16-channel 12-bit ADC reads DC-bus voltage, phase currents, and temperature simultaneously. Its 2.5-5.5 V tolerance allows direct interface to 5V gate drivers, and 30 MIPS supports space-vector modulation plus closed-loop voltage regulation on a single core.
Рекомендуется
Industrial Sensor Signal Conditioning
When a design needs FIR or IIR filtering of multi-channel sensor data plus UART/CAN reporting, the DSPIC30F5011 combines 16 ADC channels, dual 40-bit DSP accumulators, and 4 KB RAM in one package. It can sample up to 200 ksps and run 50-tap FIR filters per channel without CPU saturation. The 5V GPIO tolerance interfaces directly to legacy industrial sensors and 24V-conditioned PLC backplanes via simple resistor dividers.
Рекомендуется
Audio Processing and Active Noise Cancellation
Audio applications benefit from the DSPIC30F5011's single-cycle MAC, which executes biquad and LMS adaptive filters at sample rates up to 48 kHz. The 12-bit ADC captures microphone inputs while PWM outputs drive Class-D amplifiers. With 4 KB RAM, time-domain and frequency-domain algorithms run in parallel without external memory. CAN or SPI links to a host processor for configuration updates.
Рекомендуется
Automotive Body and Sensor Modules
Within non-safety automotive body controllers (lighting, seat control, mirror modules, generic sensor ECUs), the DSPIC30F5011 provides CAN connectivity, 52 GPIO for switches and actuators, and a 12-bit ADC for current/voltage monitoring. Industrial temperature grade is sufficient for cabin environments. Designers needing -40 C to +125 C AEC-Q100 must migrate to an AEC-Q100-qualified sibling rather than this part.
Рекомендуется
Industrial Automation PLC Modules
As a peripheral module in a PLC rack, the DSPIC30F5011 handles analog input scanning (16 channels at 12 bits), digital I/O expansion via its 52 GPIOs, and CAN/Ethernet bridging to the central controller. The DSP engine accelerates moving-average and notch filters for 50/60 Hz mains rejection. Its 5V tolerance avoids level shifters when interfacing to legacy 24V PLC backplanes via opto-isolators.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPIC30F5011T-30I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPIC30F5011-30I/PT | DSPIC30F5013-30I/PT | DSPIC30F5011T-30I/PTVAO | DSPIC30F5011T-30I/PTG | DSPIC30F501130IP |
|---|---|---|---|---|---|---|
| Package | TQFP-64 (10x10 mm, PT) | TQFP-64 (10x10 mm, PT) - same | TQFP-64 (10x10 mm, PT) - same | TQFP-64 (10x10 mm, PT) - same | TQFP-64 (10x10 mm, PT) - same | TQFP-64 (10x10 mm, PT) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core / MIPS | dsPIC30 / 30 MIPS | dsPIC30 / 30 MIPS - same | dsPIC30 / 30 MIPS - same | dsPIC30 / 30 MIPS - same | dsPIC30 / 30 MIPS - same | dsPIC30 / 30 MIPS - same |
| ADC | 12-bit, 16 channels | 12-bit, 16 channels - same | 12-bit, 16 channels - same | 12-bit, 16 channels - same | 12-bit, 16 channels - same | 12-bit, 16 channels - same |
| Supply Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V - same | 2.5 V to 5.5 V - same | 2.5 V to 5.5 V - same | 2.5 V to 5.5 V - same | 2.5 V to 5.5 V - same |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C - same | -40 C to +85 C - same | -40 C to +85 C - same | -40 C to +85 C - same | -40 C to +85 C - same |
| Packaging | Tape & Reel | Tray | Tray | Tape & Reel | Tape & Reel | Tray |
Ключевые отличия
- Single-chip 30 MIPS DSP engine with MCU peripherals (против DSP56F803BU80E (NXP 56800 core))
- 5V-tolerant I/O without external level shifters (против dsPIC33FJ series (3.3V I/O))
- Pin-compatible upgrade path to higher-memory variant (против DSPIC30F5013-30I/PT (TQFP-64))
Заметки по проектированию
Decouple each VDD/VSS pair with a 100 nF ceramic placed within 5 mm of the pin, and add a bulk 10 uF tantalum or aluminum-polymer cap near the package. The DSPIC30F5011 has separate AVDD/AVSS rails; decouple them with their own 100 nF cap and tie them to the digital rails only at one point to avoid ground loops. Brown-out reset is enabled in configuration bits to protect Flash from low-voltage writes.
Route the analog input traces AN0-AN15 over a continuous analog ground plane and keep them short to minimize ADC noise pickup. Keep PWM outputs and high-current traces away from the oscillator pins OSCI/OSCO. Place the crystal within 10 mm of the OSC pins with a grounded guard ring on the outer sides, and keep the ICSP lines PGC/PGD away from switching signals to prevent in-circuit debug glitches.
The DSPIC30F5011 is 5V tolerant on most digital I/O but the analog inputs must not exceed AVDD + 0.3 V or accuracy degrades. MCLR must have a 10 kohm pull-up to VDD; floating MCLR causes random resets. Configuration bits must be set correctly for oscillator mode, watchdog timer, and code protection before code will execute reliably; refer to the dsPIC30F family reference manual section on configuration.
Информация о соответствии
RoHS compliant per Microchip product page. Industrial -40 C to +85 C only; not AEC-Q100 qualified - migrate to an automotive-grade dsPIC variant for AEC-Q100 needs.
