DSPIC33EP256MU810-E/PT - 16-bit DSC, 256KB Flash, USB | Microchip
Артикул: DSPIC33EP256MU810-E/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.85 | $9,85 |
| 10 | $8.92 | $89,20 |
| 100 | $7.95 | $795,00 |
| 500 | $7.1 | $3.550,00 |
| 1.000 | $6.45 | $6.450,00 |
DSPIC33EP256MU810-E/PT Обзор
A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic interrupt-driven architecture of a microcontroller with the high-throughput computational capability of a digital signal processor (DSP). In the broader system taxonomy, a DSC belongs to the microcontroller family, which sits within embedded processors, then semiconductor ICs, and finally the power management and control hierarchy used in motor control, power conversion, and digital audio systems. The 'E' suffix indicates an extended temperature grade of -40 °C to +125 °C, while the 'PT' suffix denotes the 12 x 12 mm 100-pin TQFP surface-mount package with 0.5 mm pitch.
Key features include integrated USB 2.0 full-speed OTG, two CAN modules, up to 15 DMA channels, 27 timers (nine 16-bit and eighteen 32-bit), a 16-channel 12-bit ADC with up to 500 ksps conversion, five 16-bit PWM generators with dedicated time bases and up to 8 output channels, and four compare/PWM modules with dual-edge capability. The 70 MIPS core can execute a 16x16 multiply in one cycle and supports fractional arithmetic (1.15 format) via the XAGU and DSP engine.
Typical applications include precision motor control (BLDC, PMSM, AC induction, switched reluctance), digital power conversion (PFC, LLC, phase-shifted full-bridge), automotive body and chassis ECUs, industrial drives, photovoltaic inverters, and USB-connected embedded devices. Design considerations include the need for a stable 3.3 V analog supply for the ADC, decoupling on every VDD/VSS pair, and a JTAG or PG/PG interface for in-circuit programming.
Аналоги без доработки для DSPIC33EP256MU810-E/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPIC33EP256MU810-E/PT (тот же форм-фактор и посадочное место) — отличается по Package, Core Architecture, ADC, Operating Temperature, Timers.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPIC33EP256MU810-I/PT
✅ Прямая замена✓ В наличии
$10.2 / шт.
Открыть даташит →DSPIC33EP256MU810T-E/PT
✅ Прямая замена✓ В наличии
$4.62 / шт.
Открыть даташит →DSPIC33EP256MU810-E/PTC01
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC33EP256MC506-E/PT
✅ Прямая замена✓ В наличии
$5.83 / шт.
Открыть даташит →DSPIC33EP256MU810-E/PTVAO
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC33CK512MPT608-E/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC33EP256GP504-I/ML
✅ Прямая замена✓ В наличии
$5.68 / шт.
Открыть даташит →DSPIC33EP256MU810-E/PT Максимальные параметры и электрические характеристики
| Core | dsPIC33E DSC (16-bit DSP-enhanced) |
| Maximum CPU Speed | 70 MIPS at 3.3 V |
| Максимальная тактовая частота | 60 MHz |
| Program Memory (Flash) | 256 KB |
| Data Memory (SRAM) | 28 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| I/O Pins | 51 |
| DMA Channels | Up to 15 |
| Timers | 27 total (9 x 16-bit + 18 x 32-bit) |
| PWM Channels | Up to 8 output, 5 generators |
| ADC | 12-bit, up to 16 channels, 500 ksps |
| Communication Interfaces | USB 2.0 FS OTG, 2x CAN, UART, SPI, I2C |
| Рабочая температура | -40 °C to +125 °C (E grade) |
| Корпус | 100-pin TQFP (PT) 12x12 mm, 0.5 mm pitch |
| Тип монтажа | Surface Mount |
| Уровень MSL | 3 (168 hours) |
| Статус RoHS | Compliant |
| Lead-Free | Yes |
Конфигурация выводов DSPIC33EP256MU810-E/PT
| Контакт 1 | RP15/PWM4H/PMCS1/RB15 — Remappable I/O / PWM / parallel master chip select |
| Контакт 2 | RP14/PWM3L/PMCS2/RB14 — Remappable I/O / PWM / parallel master chip select |
| Контакт 3 | RP13/AN11/RB13 — Remappable I/O / analog input 11 |
| Контакт 4 | RP12/AN12/RB12 — Remappable I/O / analog input 12 |
| Контакт 5 | RP11/AN13/RB11 — Remappable I/O / analog input 13 |
| Контакт 6 | RP10/AN14/RB10 — Remappable I/O / analog input 14 |
| Контакт 7 | RP9/AN15/RB9 — Remappable I/O / analog input 15 |
| Контакт 8 | RP8/AN16/RB8 — Remappable I/O / analog input 16 |
| Контакт 9 | RP7/AN17/RB7 — Remappable I/O / analog input 17 |
| Контакт 10 | RP6/AN18/RB6 — Remappable I/O / analog input 18 |
| Контакт 11 | RP5/AN19/RB5 — Remappable I/O / analog input 19 |
| Контакт 12 | RP4/AN20/RB4 — Remappable I/O / analog input 20 |
| Контакт 13 | RP3/AN21/RB3 — Remappable I/O / analog input 21 |
| Контакт 14 | RP2/AN22/RB2 — Remappable I/O / analog input 22 |
| Контакт 15 | RP1/AN23/RB1 — Remappable I/O / analog input 23 |
| Контакт 16 | OSCI/CLKI/RC12 — Oscillator crystal input / external clock |
| Контакт 17 | OSCO/CLKO/RC15 — Oscillator crystal output |
| Контакт 18 | VSS — Ground reference |
| Контакт 19 | VDD — Digital supply 3.0-3.6 V |
| Контакт 20 | MCLR — Master clear (reset) input, active-low |
| Контакт 21 | TMS/RP20/PMCS1/RC4 — JTAG test mode select / remappable I/O |
| Контакт 22 | TCK/RP19/PMCS2/RC3 — JTAG test clock / remappable I/O |
| Контакт 23 | TDI/RP18/RC2 — JTAG test data in / remappable I/O |
| Контакт 24 | TDO/RP17/RC1 — JTAG test data out / remappable I/O |
| Контакт 25 | AVDD — Analog supply 3.0-3.6 V for ADC |
| Контакт 26 | AVSS — Analog ground for ADC |
| Контакт 27 | VREF+/CVREF+/AN0/RA0 — ADC positive reference / analog input 0 |
| Контакт 28 | VREF-/CVREF-/AN1/RA1 — ADC negative reference / analog input 1 |
| Контакт 29 | AN2/RA2 — Analog input 2 |
| Контакт 30 | AN3/RA3 — Analog input 3 |
| Контакт 31 | AN4/RA4 — Analog input 4 |
| Контакт 32 | AN5/RA5 — Analog input 5 |
| Контакт 33 | AN6/RA6 — Analog input 6 |
| Контакт 34 | AN7/RA7 — Analog input 7 |
| Контакт 35 | AN8/RA8 — Analog input 8 |
| Контакт 36 | AN9/RA9 — Analog input 9 |
| Контакт 37 | AVSS — Analog ground |
| Контакт 38 | AVDD — Analog supply 3.0-3.6 V |
| Контакт 39 | VDD — Digital supply 3.0-3.6 V |
| Контакт 40 | VSS — Ground reference |
| Контакт 41 | DML/RC10 — USB D- line (full-speed) |
| Контакт 42 | DPL/RC9 — USB D+ line (full-speed) |
| Контакт 43 | VBUS/RC8 — USB VBUS detection input |
| Контакт 44 | VBUSON/AN24/RC7 — USB VBUS power enable output / analog input |
| Контакт 45 | VCAP/RC5 — Internal voltage regulator output, 1.8 V core; requires 10 uF cap |
| Контакт 46 | RP0/PWM1H/RD0 — Remappable I/O / PWM 1H high output |
| Контакт 47 | RP1/PWM1L/RD1 — Remappable I/O / PWM 1L low output |
| Контакт 48 | RP2/PWM2H/RD2 — Remappable I/O / PWM 2H high output |
| Контакт 49 | RP3/PWM2L/RD3 — Remappable I/O / PWM 2L low output |
| Контакт 50 | RP4/PWM3H/RD4 — Remappable I/O / PWM 3H high output |
| Контакт 51 | RP5/PWM3L/RD5 — Remappable I/O / PWM 3L low output |
| Контакт 52 | RP6/PWM4H/RD6 — Remappable I/O / PWM 4H high output |
| Контакт 53 | RP7/PWM4L/RD7 — Remappable I/O / PWM 4L low output |
| Контакт 54 | RP9/RD9 — Remappable I/O |
| Контакт 55 | RP10/RD10 — Remappable I/O |
| Контакт 56 | RP11/RD11 — Remappable I/O |
| Контакт 57 | RP12/RD12 — Remappable I/O |
| Контакт 58 | RP13/RD13 — Remappable I/O |
| Контакт 59 | RP14/RD14 — Remappable I/O |
| Контакт 60 | RP15/RD15 — Remappable I/O |
| Контакт 61 | VSS — Ground reference |
| Контакт 62 | VDD — Digital supply 3.0-3.6 V |
| Контакт 63 | RP0/RE0 — Remappable I/O |
| Контакт 64 | RP1/RE1 — Remappable I/O |
| Контакт 65 | RP2/RE2 — Remappable I/O |
| Контакт 66 | RP3/RE3 — Remappable I/O |
| Контакт 67 | RP4/RE4 — Remappable I/O |
| Контакт 68 | RP5/RE5 — Remappable I/O |
| Контакт 69 | RP6/RE6 — Remappable I/O |
| Контакт 70 | RP7/RE7 — Remappable I/O |
| Контакт 71 | RF0/PWM5H — Remappable I/O / PWM 5H high output |
| Контакт 72 | RF1/PWM5L — Remappable I/O / PWM 5L low output |
| Контакт 73 | C1IN-/AN25/RE9 — Comparator 1 negative input / analog input 25 |
| Контакт 74 | C1IN+/AN26/RE10 — Comparator 1 positive input / analog input 26 |
| Контакт 75 | C1OUT/RE11 — Comparator 1 output |
| Контакт 76 | C2IN-/AN27/RE12 — Comparator 2 negative input / analog input 27 |
| Контакт 77 | C2IN+/AN28/RE13 — Comparator 2 positive input / analog input 28 |
| Контакт 78 | C2OUT/RE14 — Comparator 2 output |
| Контакт 79 | VDD — Digital supply 3.0-3.6 V |
| Контакт 80 | VSS — Ground reference |
| Контакт 81 | CAN1RX1/RF4 — CAN 1 receive |
| Контакт 82 | CAN1TX1/RF5 — CAN 1 transmit |
| Контакт 83 | CAN2RX1/RF6 — CAN 2 receive |
| Контакт 84 | CAN2TX1/RF7 — CAN 2 transmit |
| Контакт 85 | SDA1/RG3 — I2C 1 data |
| Контакт 86 | SCL1/RG2 — I2C 1 clock |
| Контакт 87 | SDA2/RG1 — I2C 2 data |
| Контакт 88 | SCL2/RG0 — I2C 2 clock |
| Контакт 89 | U1CTS/RF8 — UART 1 clear-to-send |
| Контакт 90 | U1RTS/RF3 — UART 1 request-to-send |
| Контакт 91 | U1RX/RF2 — UART 1 receive |
| Контакт 92 | U1TX/RF1 — UART 1 transmit |
| Контакт 93 | U2CTS/RG9 — UART 2 clear-to-send |
| Контакт 94 | U2RTS/RG8 — UART 2 request-to-send |
| Контакт 95 | U2RX/RG7 — UART 2 receive |
| Контакт 96 | U2TX/RG6 — UART 2 transmit |
| Контакт 97 | SPI1SCK/RG0 — SPI 1 clock (alt mapping) |
| Контакт 98 | SPI1SDI/RG7 — SPI 1 data in (alt mapping) |
| Контакт 99 | SPI1SDO/RG8 — SPI 1 data out (alt mapping) |
| Контакт 100 | SPI1SS/RG6 — SPI 1 slave select (alt mapping) |
Типичное применение
DSPIC33EP256MU810-E/PT подходит для 6 применениеs: 3-Phase BLDC and PMSM Motor Control, Digital Switch-Mode Power Supply (SMPS) Control, USB-Connected Industrial Embedded Devices, Automotive Body and Chassis ECU, Industrial Sensor Hub and Data Acquisition, Photovoltaic Inverter Control.
3-Phase BLDC and PMSM Motor Control
The DSPIC33EP256MU810-E/PT's 70 MIPS DSP engine, 5 PWM generators with up to 8 outputs, and 12-bit ADC at 500 ksps make it ideal for field-oriented control of brushless DC and permanent-magnet synchronous motors. According to the Microchip datasheet, the integrated DSP engine executes Park and Clarke transforms in a single cycle, enabling FOC loop closure at 10-20 kHz. The dual CAN interfaces also let multiple axes share a real-time industrial bus.
Рекомендуется
Digital Switch-Mode Power Supply (SMPS) Control
The DSPIC33EP256MU810-E/PT drives digital control loops for PFC, LLC, and phase-shifted full-bridge converters. With 70 MIPS of headroom, dedicated PWM generators with 16.67 ns resolution, and 12-bit ADCs sampling at 500 ksps, the DSC closes voltage and current loops with deterministic interrupt latency under 100 ns. The USB peripheral also enables in-field firmware and telemetry updates for grid-tied inverters.
Рекомендуется
USB-Connected Industrial Embedded Devices
The integrated USB 2.0 full-speed On-The-Go transceiver makes the DSPIC33EP256MU810-E/PT a natural fit for industrial USB peripherals such as data loggers, programmable sensor hubs, and human-interface devices. The 256 KB Flash supports USB stacks (Microchip MLA) with room for application firmware, while the dual CAN interfaces extend connectivity to factory-floor networks without additional chips.
Рекомендуется
Automotive Body and Chassis ECU
With extended -40 to +125 °C temperature grade, dual CAN 2.0B modules, and LIN/UART capability, the DSPIC33EP256MU810-E/PT handles automotive body control, HVAC actuators, and chassis subsystems. The 256 KB Flash stores OBD-II diagnostics and bootloader firmware; the dedicated PWM generators drive brushed and brushless DC actuators with hardware dead-time control. AEC-Q100 grade is not explicitly listed; consult Microchip for the latest automotive qualification status.
Рекомендуется
Industrial Sensor Hub and Data Acquisition
The 16-channel 12-bit ADC at 500 ksps, 15 DMA channels, and 27 timers make the DSPIC33EP256MU810-E/PT well-suited to multi-sensor industrial acquisition nodes. According to the Microchip datasheet, the DMA can autonomously stream ADC samples into SRAM, freeing the CPU for statistical analysis. The USB OTG plus Ethernet-capable UARTs (via external PHY) connect the hub to plant SCADA systems.
Рекомендуется
Photovoltaic Inverter Control
The DSPIC33EP256MU810-E/PT controls grid-tied photovoltaic inverters where the DSC executes MPPT algorithms, anti-islanding detection, and grid synchronization in real time. With 70 MIPS, 256 KB Flash for the MPPT plus grid-code logic, and high-resolution PWM for the IGBT bridge, the part supports single-phase and three-phase topologies. The USB OTG enables local commissioning via laptops without a separate UART-to-USB bridge.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPIC33EP256MU810-E/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPIC33EP256MU810-I/PT | DSPIC33EP256MC506-E/PT | DSPIC33CK512MPT608-E/PT | DSPIC33EP256MU810T-E/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (PT) 12x12 mm | TQFP-100 (PT) - same | TQFP-100 (PT) - same | TQFP-100 (PT) - same | TQFP-100 (PT) - same |
| CPU Core | dsPIC33E DSC @ 70 MIPS | dsPIC33E DSC @ 70 MIPS | dsPIC33E DSC @ 70 MIPS | dsPIC33CK DSC @ 100 MIPS | dsPIC33E DSC @ 70 MIPS |
| Flash Memory | 256 KB | 256 KB | 256 KB | 512 KB | 256 KB |
| SRAM | 28 KB | 28 KB | 16 KB | 48 KB | 28 KB |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | No USB | USB 2.0 FS OTG | USB 2.0 FS OTG |
| CAN Modules | 2 | 2 | 2 | 3 | 2 |
| PWM Generators / Outputs | 5 generators / 8 outputs | 5 generators / 8 outputs | 8 generators / 14 outputs | 8 generators / 16 outputs | 5 generators / 8 outputs |
| Temperature Grade | -40 C to +125 C (E) | -40 C to +85 C (I) | -40 C to +125 C (E) | -40 C to +125 C (E) | -40 C to +125 C (E) |
Ключевые отличия
- Integrated USB 2.0 OTG plus dual-CAN in a single 100-pin TQFP (против DSPIC33EP256MC506-E/PT)
- Extended -40 to +125 C temperature grade as standard (против DSPIC33EP256MU810-I/PT)
- dsPIC33E firmware-compatible upgrade path to 100 MHz dsPIC33CK (против DSPIC33CK512MPT608-E/PT)
- 5 PWM generators with 16.67 ns resolution for motor and power control (против DSPIC33EP256GP504-I/ML)
Заметки по проектированию
Estimated: Power dissipation at 70 MIPS and 3.3 V with all peripherals active is approximately 60 mA (198 mW). Decouple each VDD/VSS pair with a 100 nF ceramic plus a 10 uF bulk; the VCAP pin (1) requires a 10 uF low-ESR capacitor to ground within 0.25 inch of the pin to stabilize the internal 1.8 V regulator. AVDD must be tied to VDD through a ferrite bead if ADC noise exceeds 1 LSB.
The 100-pin TQFP (PT) uses a 0.5 mm pitch and 12x12 mm footprint with a thermal pad on the underside that is NOT electrically connected. Solder the thermal pad to a copper pour to reduce junction temperature; at 200 mW total dissipation this is optional but recommended at high ambient. Keep analog traces (AN0-AN28, VREF+, VREF-) short and isolated from PWM switching traces; place the AVSS reference ground star at the ADC reference pin.
The USB D+/D- pair (DPL/DML, pins 42/41) must be routed as a 90-ohm differential pair with matched length within 150 mil and continuous reference plane; place the 15 kohm pull-down on D+ only if using device mode (not OTG). The oscillator pins (OSCI/OSCO, 16/17) require a guard ground ring and short traces within 0.2 inch of the pins; use a crystal matched to the dsPIC33E oscillator load capacitance specification.
Do not skip the VCAP capacitor - without it the internal 1.8 V regulator will oscillate and the part will fail to start. The MCLR pin (20) requires a 10 kohm pull-up to VDD; leaving it unconnected can cause intermittent resets. The PG/PGD programming pins are shared with JTAG and can be remapped; if using JTAG boundary scan, lock the alternate mapping via configuration bits to prevent debugger interference.
Estimated: Theta_JA for the TQFP-100 (PT) package on a 4-layer JEDEC test board is approximately 35 C/W. At full 200 mW dissipation and +125 °C ambient, the junction temperature stays within the 150 °C limit (175 C rise + 125 C = 150 C), but at +85 C industrial applications full-power dissipation is fine. For enclosed enclosures with limited airflow, reduce peripheral clock rates or enable sleep mode between control loops.
Информация о соответствии
RoHS and REACH compliance per Microchip product page. AEC-Q100 qualification not explicitly confirmed for this specific variant in the verified web data - consult Microchip product selector for automotive-grade ordering codes.
