EP4SGX110DF29I3G - 110K LE Stratix IV GX FPGA 780-FCBGA | Intel
Артикул: EP4SGX110DF29I3G ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2850 | $2.850,00 |
| 10 | $2680 | $26.800,00 |
| 100 | $2455 | $245.500,00 |
| 500 | $2230 | $1.115.000,00 |
| 1.000 | $1995 | $1.995.000,00 |
EP4SGX110DF29I3G Обзор
A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit based on a matrix of configurable logic blocks (CLBs) connected via programmable interconnect, allowing hardware designers to implement custom digital logic that can be reconfigured after manufacturing. Within the broader semiconductor taxonomy, FPGAs sit between general-purpose processors (which execute software) and application-specific integrated circuits (ASICs, which are fixed at fabrication). The Stratix IV family from Intel/Altera adds hardened IP blocks (transceivers, DSP, memory controllers, PCIe) that accelerate common functions and free up programmable logic for application-specific logic.
Key features include 105,600 LEs, 9,793,536 bits of embedded RAM, 660 DSP blocks, 16 transceivers at up to 8.5 Gbps, and a hard PCIe Gen2 controller. The device supports LVDS, LVTTL, LVCMOS, HSTL, and SSTL I/O standards with hot-socketing capability, and includes dedicated on-chip termination (OCT) for signal integrity. Industrial-grade temperature range is -40C to +100C for I3 grade, suitable for harsh environments.
The architecture combines an 8.5 Gbps transceiver physical layer with a programmable logic fabric and embedded memory, allowing designers to implement protocols such as PCIe Gen2, Serial RapidIO, XAUI, and custom high-speed serial interfaces. The 40 nm low-power process minimizes dynamic power while preserving high performance, and on-chip PLLs support frequencies up to 800 MHz with fractional-N synthesis.
Typical applications include high-speed serial interfaces for communications infrastructure, PCIe accelerator cards in data center and server platforms, military and aerospace signal processing, high-end medical imaging, broadcast video processing, and industrial test equipment. The device's combination of transceiver bandwidth and DSP throughput makes it well suited for wireless baseband processing and radar systems.
When designing with this FPGA, ensure the PCB supports the 780-ball FCBGA's controlled-impedance routing and matched-length traces for transceiver channels. The Quartus II development environment (version 13.0 or later) is required for synthesis, place-and-route, and programming file generation. Designers should also plan power sequencing to the Stratix IV power-up requirements and verify transceiver reference clock jitter against the protocol specification.
This page synthesizes distributor pricing, package-equivalent Stratix IV GX drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving component buyers and FPGA designers a single reference for sourcing decisions.
Аналоги без доработки для EP4SGX110DF29I3G — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EP4SGX110DF29I3G (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Transceivers, Mounting Type, Adaptive Logic Modules (ALM).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EP4SGX110DF29C3G
✅ Прямая замена✓ В наличии
$2610.5 / шт.
Открыть даташит →EP4SGX110DF29C4G
✅ Прямая замена✓ В наличии
$1495 / шт.
Открыть даташит →EP4SGX110DF29I4G
✅ Прямая замена✓ В наличии
$1085 / шт.
Открыть даташит →EP4SGX110DF29C2XG
✅ Прямая замена✓ В наличии
$1265 / шт.
Открыть даташит →EP4SGX110DF29I3G Максимальные параметры и электрические характеристики
| Series | Stratix IV GX |
| Family | Stratix IV |
| Process Technology | 40 nm |
| Logic Elements (LE) | 105,600 |
| Adaptive Logic Modules (ALM) | 41,250 |
| Embedded Memory Bits | 9,793,536 |
| Embedded Memory Blocks (M9K) | 660 |
| DSP Blocks | 660 (18x18 multipliers) |
| Maximum User I/O | 372 |
| Transceivers | 16 (up to 8.5 Gbps) |
| PCIe Hard IP | Gen2 x4 (8.5 Gbps) |
| Корпус | 780-ball FCBGA, 29x29 mm |
| Package Code | DF29 |
| Рабочая температура | -40C to +100C (Industrial I3 grade) |
| Speed Grade | 3 |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Руководство по цоколевке EP4SGX110DF29I3G в корпусе df29
Цоколевка для EP4SGX110DF29I3G (корпус df29). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для EP4SGX110DF29I3G.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
EP4SGX110DF29I3G подходит для 6 применениеs: Telecom Baseband and Backhaul, PCIe Accelerator Card (Data Center), Military and Aerospace Signal Processing, Medical Imaging Systems, Broadcast Video Processing, Industrial Test and Measurement.
Telecom Baseband and Backhaul
The EP4SGX110DF29I3G suits telecom baseband and backhaul designs because its 16 transceivers up to 8.5 Gbps handle CPRI, OBSAI, and Serial RapidIO links between baseband units and remote radio heads. The 105,600 LEs and 660 DSP blocks process PHY-layer functions such as channel coding, FFT/iFFT, and digital pre-distortion. The industrial -40C to +100C temperature range meets outdoor base-station specs.
Рекомендуется
PCIe Accelerator Card (Data Center)
In PCIe Gen2 x4 accelerator cards, the EP4SGX110DF29I3G integrates a hard PCIe controller that handles transaction layer and link layer offload without burning programmable logic. The remaining 105,600 LEs run user workloads such as compression, encryption, or analytics. The 780-ball FCBGA's matched-length transceiver lanes support PCIe Gen2 signaling at 5 Gbps per lane with low jitter.
Рекомендуется
Military and Aerospace Signal Processing
Defense systems use the EP4SGX110DF29I3G for radar, electronic warfare, and secure communications due to its industrial temperature range and radiation-tolerant design practices available in Stratix IV. The 660 DSP blocks (18x18 multipliers) enable real-time FFT, pulse-Doppler processing, and digital down-conversion. Reprogrammability allows in-field firmware updates for evolving threat environments.
Рекомендуется
Medical Imaging Systems
Medical imaging modalities such as ultrasound, MRI, and CT scanners use the EP4SGX110DF29I3G to process high-bandwidth data streams in real time. The 9.8 Mbit embedded memory buffers raw transducer samples, while the 660 DSP blocks execute beamforming and image reconstruction. Industrial temperature tolerance supports mobile and bedside medical equipment that must operate in varying environmental conditions.
Рекомендуется
Broadcast Video Processing
Broadcast video infrastructure including 3G/HD-SDI routers, format converters, and video servers benefits from the EP4SGX110DF29I3G's transceiver bandwidth and DSP capacity. The 8.5 Gbps transceivers handle uncompressed SDI streams, while embedded memory acts as frame buffers for cross-point switching. The industrial temperature grade supports 24/7 rack-mount operation in broadcast facilities.
Рекомендуется
Industrial Test and Measurement
Automated test equipment (ATE) and protocol analyzers use the EP4SGX110DF29I3G to implement multi-channel high-speed serial interfaces and parallel test pattern generators. The 16 transceivers support standards like PCIe, SATA, USB 3.0 (PIPE), and XAUI simultaneously. The 372 user I/Os drive parallel buses and trigger signals, while DSP blocks accelerate FFT-based signal analysis on captured waveforms.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EP4SGX110DF29I3G — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EP4SGX110DF29C3G | EP4SGX110DF29C4G | EP4SGX110DF29I4G | EP4SGX110HF35C3G |
|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel |
| Package | 780-ball FCBGA (DF29) 29x29 mm | 780-ball FCBGA (DF29) 29x29 mm - same | 780-ball FCBGA (DF29) 29x29 mm - same | 780-ball FCBGA (DF29) 29x29 mm - same | 780-ball FCBGA (HF35) 35x35 mm - different |
| Logic Elements | 105,600 | 105,600 | 105,600 | 105,600 | 105,600 |
| Embedded Memory | 9,793,536 bits | 9,793,536 bits | 9,793,536 bits | 9,793,536 bits | 9,793,536 bits |
| DSP Blocks | 660 | 660 | 660 | 660 | 660 |
| Transceivers | 16 x 8.5 Gbps | 16 x 8.5 Gbps | 16 x 8.5 Gbps | 16 x 8.5 Gbps | 16 x 8.5 Gbps |
| Speed Grade | 3 | 3 | 4 (+10-15% Fmax) | 4 (+10-15% Fmax) | 3 |
| Temperature Grade | Industrial -40C to +100C | Commercial 0C to +85C | Commercial 0C to +85C | Industrial -40C to +100C | Commercial 0C to +85C |
Ключевые отличия
- Industrial temperature range in same package (против EP4SGX110DF29C3G)
- Higher Fmax via speed grade 4 (против EP4SGX110DF29C4G and EP4SGX110DF29I4G)
- Compact 29x29 mm package for size-constrained designs (против EP4SGX110HF35C3G (35x35 mm))
Заметки по проектированию
The 780-ball FCBGA requires 1.0 mm ball pitch and microvia/laser-drilled PCB stack-up for breakout. Use at least an 8-layer board with dedicated ground planes beneath the device and matched 50 ohm single-ended or 100 ohm differential impedance for transceiver channels. Allocate 4 transceiver reference clock inputs with matched-length routing to within 25 mils. Decoupling requires 0.1uF and 0.01uF ceramics within 200 mils of power pins, plus bulk polymer tantalum caps.
Estimated: at typical Stratix IV GX utilization around 60-70% with all 16 transceivers at 8.5 Gbps, total power reaches approximately 12-15 W. Without airflow or a heatsink, the 780-ball FCBGA's theta_JA of around 14 C/W causes junction temperature rise of 170-210C above ambient, exceeding the 100C industrial limit. A heatsink with thermal interface material and 200-400 LFM airflow is mandatory; consider also a cold plate for sealed enclosures.
Do not omit CONFIG_DONE pull-up or JTAG pull-ups on nCONFIG, nSTATUS, and TCK - missing pull-ups cause intermittent configuration failures. Ensure the 1.0V core, 2.5V analog, and 3.3V I/O rails come up in the Stratix IV specified power-up sequence. Cyclone IV and Cyclone V bitstreams are not compatible; use only Quartus II 13.0 or 13.1 for final programming file generation to ensure correct silicon support.
Информация о соответствии
RoHS compliant per Intel Stratix IV GX RoHS certificate. Lead-free ball finish (SAC405 or similar). MSL level not stated in available data - marked [DATA_NEEDED]. AEC-Q100 not applicable for FPGAs.
